<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider Administration Manual v1.50: Routing and Filtering</TITLE>
<LINK HREF="adminmanual_en-2.html" REL=next>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider Administration Manual v1.50: CVS</TITLE>
<LINK HREF="adminmanual_en-11.html" REL=next>
<LINK HREF="adminmanual_en-9.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider Administration Manual v1.50: The DXSpider Command Reference</TITLE>
<LINK HREF="adminmanual_en-10.html" REL=previous>
<LINK HREF="adminmanual_en.html#toc11" REL=contents>
</PRE>
</CODE></BLOCKQUOTE>
<BLOCKQUOTE><CODE>
+<PRE>
+ real or rt - Format the output the same as for real time spots. The formats are deliberately different (so you can tell one sort from the other). This is useful for some logging programs that can't cope with normal sh/dx output. An alias of SHOW/FDX is available.
+</PRE>
+</CODE></BLOCKQUOTE>
+<BLOCKQUOTE><CODE>
+<PRE>
+ filter - Filter the spots, before output, with the user's spot filter. An alias of SHOW/MYDX is available.
+</PRE>
+</CODE></BLOCKQUOTE>
+<BLOCKQUOTE><CODE>
+<PRE>
+ zone <zones> - look for spots in the cq zone (or zones) specified. zones are numbers separated by commas.
+</PRE>
+</CODE></BLOCKQUOTE>
+<BLOCKQUOTE><CODE>
+<PRE>
+ by_zone <zones> - look for spots spotted by people in the cq zone specified.
+</PRE>
+</CODE></BLOCKQUOTE>
+<BLOCKQUOTE><CODE>
+<PRE>
+ itu <itus> - look for spots in the itu zone (or zones) specified itu zones are numbers separated by commas.
+</PRE>
+</CODE></BLOCKQUOTE>
+<BLOCKQUOTE><CODE>
+<PRE>
+ by_itu <itus> - look for spots spotted by people in the itu zone specified.
+</PRE>
+</CODE></BLOCKQUOTE>
+<BLOCKQUOTE><CODE>
+<PRE>
+ state <list> - look for spots in the US state (or states) specified The list is two letter state codes separated by commas.
+</PRE>
+</CODE></BLOCKQUOTE>
+<BLOCKQUOTE><CODE>
+<PRE>
+ by_state <list> - look for spots spotted by people in the US state specified.
+</PRE>
+</CODE></BLOCKQUOTE>
+<BLOCKQUOTE><CODE>
<PRE>
e.g.
</PRE>
</CODE></BLOCKQUOTE>
<BLOCKQUOTE><CODE>
<PRE>
- SH/DX 9m0 SH/DX on 20m info iota SH/DX 9a on vhf day 30 SH/DX rf1p qsl SH/DX iota SH/DX iota eu-064 SH/DX qra jn86 SH/DX dxcc oq2 SH/DX dxcc oq2 by w dxcc
+ SH/DX 9m0 SH/DX on 20m info iota SH/DX 9a on vhf day 30 SH/DX rf1p qsl SH/DX iota SH/DX iota eu-064 SH/DX qra jn86 SH/DX dxcc oq2 SH/DX dxcc oq2 by w dxcc SH/DX zone 4,5,6 SH/DX by_zone 4,5,6 SH/DX state in,oh SH/DX by_state in,oh
</PRE>
</CODE></BLOCKQUOTE>
</P>
SH/DX dxcc g SH/DX dxcc w on 20m iota
</PRE>
</CODE></BLOCKQUOTE>
-</P>
+This is an alias for: SH/DX dxcc</P>
<H2><A NAME="ss11.178">11.178</A> <A HREF="adminmanual_en.html#toc11.178">show/dxqsl <callsign> (0)</A>
</H2>
<P><CODE><B>show/dxstats [days] [date]</B> Show the DX Statistics</CODE></P>
<P>Show the total DX spots for the last <days> no of days (default is 31), starting from a <date> (default: today).</P>
-<H2><A NAME="ss11.180">11.180</A> <A HREF="adminmanual_en.html#toc11.180">show/files [<filearea> [<string>]] (0)</A>
+<H2><A NAME="ss11.180">11.180</A> <A HREF="adminmanual_en.html#toc11.180">show/fdx (0)</A>
+</H2>
+
+<P><CODE><B>show/fdx</B> Show the DX data in realtime format.</CODE></P>
+<P>Normally SHOW/DX outputs spot data in a different format to therealtime data. This is a deliberate policy (so you can tell the difference between the two). Some logging programs cannot handlethis so SHOW/FDX outputs historical data in real time format.This is an alias for: SHOW/DX real</P>
+<H2><A NAME="ss11.181">11.181</A> <A HREF="adminmanual_en.html#toc11.181">show/files [<filearea> [<string>]] (0)</A>
</H2>
<P><CODE><B>show/files [<filearea> [<string>]]</B> List the contents of a filearea</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
See also TYPE - to see the contents of a file.</P>
-<H2><A NAME="ss11.181">11.181</A> <A HREF="adminmanual_en.html#toc11.181">show/filter (0)</A>
+<H2><A NAME="ss11.182">11.182</A> <A HREF="adminmanual_en.html#toc11.182">show/filter (0)</A>
</H2>
<P><CODE><B>show/filter</B> Show the contents of all the filters you have set</CODE></P>
<P>Show the contents of all the filters that are set. This command displaysall the filters set - for all the various categories.</P>
-<H2><A NAME="ss11.182">11.182</A> <A HREF="adminmanual_en.html#toc11.182">show/hfstats [days] [date] (0)</A>
+<H2><A NAME="ss11.183">11.183</A> <A HREF="adminmanual_en.html#toc11.183">show/hfstats [days] [date] (0)</A>
</H2>
<P><CODE><B>show/hfstats [days] [date]</B> Show the HF DX Statistics </CODE></P>
<P>Show the HF DX spots breakdown by band for the last <days> no of days (default is 31), starting from a <date> (default: today).</P>
-<H2><A NAME="ss11.183">11.183</A> <A HREF="adminmanual_en.html#toc11.183">show/hftable [days] [date] [prefix ...] (0)</A>
+<H2><A NAME="ss11.184">11.184</A> <A HREF="adminmanual_en.html#toc11.184">show/hftable [days] [date] [prefix ...] (0)</A>
</H2>
<P><CODE><B>show/hftable [days] [date] [prefix ...]</B> Show the HF DX Spotter Table</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss11.184">11.184</A> <A HREF="adminmanual_en.html#toc11.184">show/hops <call> [ann|spots|route|wcy|wwv] (8)</A>
+<H2><A NAME="ss11.185">11.185</A> <A HREF="adminmanual_en.html#toc11.185">show/hops <call> [ann|spots|route|wcy|wwv] (8)</A>
</H2>
<P><CODE><B>show/hops <call> [ann|spots|route|wcy|wwv]</B> Show the hop counts for a node</CODE></P>
<P>This command shows the hop counts set up for a node. You can specifywhich category you want to see. If you leave the category out then all the categories will be listed.</P>
-<H2><A NAME="ss11.185">11.185</A> <A HREF="adminmanual_en.html#toc11.185">show/isolate (1)</A>
+<H2><A NAME="ss11.186">11.186</A> <A HREF="adminmanual_en.html#toc11.186">show/isolate (1)</A>
</H2>
<P><CODE><B>show/isolate</B> Show list of ISOLATED nodes</CODE></P>
-<H2><A NAME="ss11.186">11.186</A> <A HREF="adminmanual_en.html#toc11.186">show/lockout <prefix>|all (9)</A>
+<H2><A NAME="ss11.187">11.187</A> <A HREF="adminmanual_en.html#toc11.187">show/lockout <prefix>|all (9)</A>
</H2>
<P><CODE><B>show/lockout <prefix>|all</B> Show the list of locked out or excluded callsigns</CODE></P>
-<H2><A NAME="ss11.187">11.187</A> <A HREF="adminmanual_en.html#toc11.187">show/log [<callsign>] (8)</A>
+<H2><A NAME="ss11.188">11.188</A> <A HREF="adminmanual_en.html#toc11.188">show/log [<callsign>] (8)</A>
</H2>
<P><CODE><B>show/log [<callsign>]</B> Show excerpts from the system log</CODE></P>
<P>This command outputs a short section of the system log. On its ownit will output a general logfile. With the optional callsign it willshow output from the log associated with that callsign.</P>
-<H2><A NAME="ss11.188">11.188</A> <A HREF="adminmanual_en.html#toc11.188">show/moon [ndays] [<prefix>|<callsign>] (0)</A>
+<H2><A NAME="ss11.189">11.189</A> <A HREF="adminmanual_en.html#toc11.189">show/moon [ndays] [<prefix>|<callsign>] (0)</A>
</H2>
<P><CODE><B>show/moon [ndays] [<prefix>|<callsign>]</B> Show Moon rise and set times</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
Upto 366 days can be checked both in the past and in the future.Please note that the rise and set times are given as the UT times of rise and set on the requested UT day.</P>
-<H2><A NAME="ss11.189">11.189</A> <A HREF="adminmanual_en.html#toc11.189">show/muf <prefix> [<hours>][long] (0)</A>
+<H2><A NAME="ss11.190">11.190</A> <A HREF="adminmanual_en.html#toc11.190">show/muf <prefix> [<hours>][long] (0)</A>
</H2>
<P><CODE><B>show/muf <prefix> [<hours>][long]</B> Show the likely propagation to a prefix</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
Gives you an estimate of the long path propagation characterics. Itshould be noted that the figures will probably not be very useful, norterrible accurate, but it is included for completeness.</P>
-<H2><A NAME="ss11.190">11.190</A> <A HREF="adminmanual_en.html#toc11.190">show/newconfiguration [<node>] (0)</A>
+<H2><A NAME="ss11.191">11.191</A> <A HREF="adminmanual_en.html#toc11.191">show/mydx (0)</A>
+</H2>
+
+<P><CODE><B>show/mydx</B> Show the DX data filtered with your spot filter.</CODE></P>
+<P>SHOW/DX potentially shows all the spots available in the system. UsingSHOW/MYDX will, instead, filter the availble spots using any spot filter that you have set, first. This command, together with ACCEPT/SPOT or REJECT/SPOT, will allowyou to customise the spots that you receive.So if you have said: ACC/SPOT on hfDoing a SHOW/MYDX will now only, ever, show HF spots. All the other options on SH/DX can still be used.</P>
+<H2><A NAME="ss11.192">11.192</A> <A HREF="adminmanual_en.html#toc11.192">show/newconfiguration [<node>] (0)</A>
</H2>
<P><CODE><B>show/newconfiguration [<node>]</B> Show all the nodes and users visible</CODE></P>
<P>This command allows you to see all the users that can be seenand the nodes to which they are connected. This command produces essentially the same information as SHOW/CONFIGURATION except that it shows all the duplication ofany routes that might be present It also uses a different formatwhich may not take up quite as much space if you don't have anyloops.BE WARNED: the list that is returned can be VERY long</P>
-<H2><A NAME="ss11.191">11.191</A> <A HREF="adminmanual_en.html#toc11.191">show/newconfiguration/node (0)</A>
+<H2><A NAME="ss11.193">11.193</A> <A HREF="adminmanual_en.html#toc11.193">show/newconfiguration/node (0)</A>
</H2>
<P><CODE><B>show/newconfiguration/node</B> Show all the nodes connected locally</CODE></P>
<P>Show all the nodes connected to this node in the new format.</P>
-<H2><A NAME="ss11.192">11.192</A> <A HREF="adminmanual_en.html#toc11.192">show/node [<callsign> ...] (1)</A>
+<H2><A NAME="ss11.194">11.194</A> <A HREF="adminmanual_en.html#toc11.194">show/node [<callsign> ...] (1)</A>
</H2>
<P><CODE><B>show/node [<callsign> ...]</B> Show the type and version number of nodes</CODE></P>
<P>Show the type and version (if connected) of the nodes specified on thecommand line. If no callsigns are specified then a sorted list of allthe non-user callsigns known to the system will be displayed.</P>
-<H2><A NAME="ss11.193">11.193</A> <A HREF="adminmanual_en.html#toc11.193">show/prefix <callsign> (0)</A>
+<H2><A NAME="ss11.195">11.195</A> <A HREF="adminmanual_en.html#toc11.195">show/prefix <callsign> (0)</A>
</H2>
<P><CODE><B>show/prefix <callsign></B> Interrogate the prefix database </CODE></P>
<P>This command takes the <callsign> (which can be a full or partial callsign or a prefix), looks up which internal country number it is and then displays all the relevant prefixes for that countrytogether with the internal country no, the CQ and ITU regions. See also SHOW/DXCC</P>
-<H2><A NAME="ss11.194">11.194</A> <A HREF="adminmanual_en.html#toc11.194">show/program (5)</A>
+<H2><A NAME="ss11.196">11.196</A> <A HREF="adminmanual_en.html#toc11.196">show/program (5)</A>
</H2>
<P><CODE><B>show/program</B> Show the locations of all the included program modules</CODE></P>
<P>Show the name and location where every program module was load from. Thisis useful for checking where you think you have loaded a .pm file from. </P>
-<H2><A NAME="ss11.195">11.195</A> <A HREF="adminmanual_en.html#toc11.195">show/qra <lat> <long> (0)</A>
+<H2><A NAME="ss11.197">11.197</A> <A HREF="adminmanual_en.html#toc11.197">show/qra <lat> <long> (0)</A>
</H2>
<P><CODE><B>show/qra <lat> <long></B> Convert lat/long to a QRA Grid locator</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss11.196">11.196</A> <A HREF="adminmanual_en.html#toc11.196">show/qra <locator> [<locator>] (0)</A>
+<H2><A NAME="ss11.198">11.198</A> <A HREF="adminmanual_en.html#toc11.198">show/qra <locator> [<locator>] (0)</A>
</H2>
<P><CODE><B>show/qra <locator> [<locator>]</B> Show distance between QRA Grid locators</CODE></P>
-<H2><A NAME="ss11.197">11.197</A> <A HREF="adminmanual_en.html#toc11.197">show/qrz <callsign> (0)</A>
+<H2><A NAME="ss11.199">11.199</A> <A HREF="adminmanual_en.html#toc11.199">show/qrz <callsign> (0)</A>
</H2>
<P><CODE><B>show/qrz <callsign></B> Show any callbook details on a callsign</CODE></P>
<P>This command queries the QRZ callbook server on the internetand returns any information available for that callsign. This serviceis provided for users of this software by http://www.qrz.com See also SHOW/WM7D for an alternative.</P>
-<H2><A NAME="ss11.198">11.198</A> <A HREF="adminmanual_en.html#toc11.198">show/registered [<prefix>] (9)</A>
+<H2><A NAME="ss11.200">11.200</A> <A HREF="adminmanual_en.html#toc11.200">show/registered [<prefix>] (9)</A>
</H2>
<P><CODE><B>show/registered [<prefix>]</B> Show the registered users</CODE></P>
-<H2><A NAME="ss11.199">11.199</A> <A HREF="adminmanual_en.html#toc11.199">show/route <callsign> ... (0)</A>
+<H2><A NAME="ss11.201">11.201</A> <A HREF="adminmanual_en.html#toc11.201">show/route <callsign> ... (0)</A>
</H2>
<P><CODE><B>show/route <callsign> ...</B> Show the route to the callsign</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss11.200">11.200</A> <A HREF="adminmanual_en.html#toc11.200">show/satellite <name> [<hours> <interval>] (0)</A>
+<H2><A NAME="ss11.202">11.202</A> <A HREF="adminmanual_en.html#toc11.202">show/satellite <name> [<hours> <interval>] (0)</A>
</H2>
<P><CODE><B>show/satellite <name> [<hours> <interval>]</B> Show tracking data</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss11.201">11.201</A> <A HREF="adminmanual_en.html#toc11.201">show/station all [<regex>] (6)</A>
+<H2><A NAME="ss11.203">11.203</A> <A HREF="adminmanual_en.html#toc11.203">show/station all [<regex>] (6)</A>
</H2>
<P><CODE><B>show/station all [<regex>]</B> Show list of users in the system</CODE></P>
-<H2><A NAME="ss11.202">11.202</A> <A HREF="adminmanual_en.html#toc11.202">show/station [<callsign> ..] (0)</A>
+<H2><A NAME="ss11.204">11.204</A> <A HREF="adminmanual_en.html#toc11.204">show/station [<callsign> ..] (0)</A>
</H2>
<P><CODE><B>show/station [<callsign> ..]</B> Show information about a callsign</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
If no callsign is given then show the information for yourself.</P>
-<H2><A NAME="ss11.203">11.203</A> <A HREF="adminmanual_en.html#toc11.203">show/sun [ndays] [<prefix>|<callsign>] (0)</A>
+<H2><A NAME="ss11.205">11.205</A> <A HREF="adminmanual_en.html#toc11.205">show/sun [ndays] [<prefix>|<callsign>] (0)</A>
</H2>
<P><CODE><B>show/sun [ndays] [<prefix>|<callsign>]</B> Show sun rise and set times</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
Upto 366 days can be checked both in the past and in the future.Please note that the rise and set times are given as the UT times of rise and set on the requested UT day.</P>
-<H2><A NAME="ss11.204">11.204</A> <A HREF="adminmanual_en.html#toc11.204">show/time [<prefix>|<callsign>] (0)</A>
+<H2><A NAME="ss11.206">11.206</A> <A HREF="adminmanual_en.html#toc11.206">show/time [<prefix>|<callsign>] (0)</A>
</H2>
<P><CODE><B>show/time [<prefix>|<callsign>]</B> Show the local time </CODE></P>
<P>If no prefixes or callsigns are given then this command returns the localtime and UTC as the computer has it right now. If you give some prefixesthen it will show UTC and UTC + the local offset (not including DST) atthe prefixes or callsigns that you specify.</P>
-<H2><A NAME="ss11.205">11.205</A> <A HREF="adminmanual_en.html#toc11.205">show/usdb [call ..] (0)</A>
+<H2><A NAME="ss11.207">11.207</A> <A HREF="adminmanual_en.html#toc11.207">show/usdb [call ..] (0)</A>
</H2>
<P><CODE><B>show/usdb [call ..]</B> Show information held on the FCC Call database</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss11.206">11.206</A> <A HREF="adminmanual_en.html#toc11.206">show/vhfstats [days] [date] (0)</A>
+<H2><A NAME="ss11.208">11.208</A> <A HREF="adminmanual_en.html#toc11.208">show/vhfstats [days] [date] (0)</A>
</H2>
<P><CODE><B>show/vhfstats [days] [date]</B> Show the VHF DX Statistics</CODE></P>
<P>Show the VHF DX spots breakdown by band for the last <days> no of days (default is 31), starting from a date (default: today).</P>
-<H2><A NAME="ss11.207">11.207</A> <A HREF="adminmanual_en.html#toc11.207">show/vhftable [days] [date] [prefix ...] (0)</A>
+<H2><A NAME="ss11.209">11.209</A> <A HREF="adminmanual_en.html#toc11.209">show/vhftable [days] [date] [prefix ...] (0)</A>
</H2>
<P><CODE><B>show/vhftable [days] [date] [prefix ...]</B> Show the VHF DX Spotter Table</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss11.208">11.208</A> <A HREF="adminmanual_en.html#toc11.208">show/wcy (0)</A>
+<H2><A NAME="ss11.210">11.210</A> <A HREF="adminmanual_en.html#toc11.210">show/wcy (0)</A>
</H2>
<P><CODE><B>show/wcy</B> Show last 10 WCY broadcasts</CODE></P>
-<H2><A NAME="ss11.209">11.209</A> <A HREF="adminmanual_en.html#toc11.209">show/wcy <n> (0)</A>
+<H2><A NAME="ss11.211">11.211</A> <A HREF="adminmanual_en.html#toc11.211">show/wcy <n> (0)</A>
</H2>
<P><CODE><B>show/wcy <n></B> Show last <n> WCY broadcasts</CODE></P>
<P>Display the most recent WCY information that has been received by the system</P>
-<H2><A NAME="ss11.210">11.210</A> <A HREF="adminmanual_en.html#toc11.210">show/wm7d <callsign> (0)</A>
+<H2><A NAME="ss11.212">11.212</A> <A HREF="adminmanual_en.html#toc11.212">show/wm7d <callsign> (0)</A>
</H2>
<P><CODE><B>show/wm7d <callsign></B> Show callbook details on a US callsigns</CODE></P>
<P>This command queries the WM7D callbook server on the internetand returns any information available for that US callsign. This serviceis provided for users of this software by http://www.wm7d.net.See also SHOW/QRZ. </P>
-<H2><A NAME="ss11.211">11.211</A> <A HREF="adminmanual_en.html#toc11.211">show/wwv (0)</A>
+<H2><A NAME="ss11.213">11.213</A> <A HREF="adminmanual_en.html#toc11.213">show/wwv (0)</A>
</H2>
<P><CODE><B>show/wwv</B> Show last 10 WWV broadcasts</CODE></P>
-<H2><A NAME="ss11.212">11.212</A> <A HREF="adminmanual_en.html#toc11.212">show/wwv <n> (0)</A>
+<H2><A NAME="ss11.214">11.214</A> <A HREF="adminmanual_en.html#toc11.214">show/wwv <n> (0)</A>
</H2>
<P><CODE><B>show/wwv <n></B> Show last <n> WWV broadcasts</CODE></P>
<P>Display the most recent WWV information that has been received by the system</P>
-<H2><A NAME="ss11.213">11.213</A> <A HREF="adminmanual_en.html#toc11.213">shutdown (5)</A>
+<H2><A NAME="ss11.215">11.215</A> <A HREF="adminmanual_en.html#toc11.215">shutdown (5)</A>
</H2>
<P><CODE><B>shutdown</B> Shutdown the cluster</CODE></P>
<P>Shutdown the cluster and disconnect all the users </P>
-<H2><A NAME="ss11.214">11.214</A> <A HREF="adminmanual_en.html#toc11.214">spoof <call> <command> (9)</A>
+<H2><A NAME="ss11.216">11.216</A> <A HREF="adminmanual_en.html#toc11.216">spoof <call> <command> (9)</A>
</H2>
<P><CODE><B>spoof <call> <command></B> Do a command as though you are another user</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss11.215">11.215</A> <A HREF="adminmanual_en.html#toc11.215">stat/channel [<callsign>] (5)</A>
+<H2><A NAME="ss11.217">11.217</A> <A HREF="adminmanual_en.html#toc11.217">stat/channel [<callsign>] (5)</A>
</H2>
<P><CODE><B>stat/channel [<callsign>]</B> Show the status of a channel on the cluster</CODE></P>
<P>Show the internal status of the channel object either for the channel that you are on or else for the callsign that you asked for.Only the fields that are defined (in perl term) will be displayed.</P>
-<H2><A NAME="ss11.216">11.216</A> <A HREF="adminmanual_en.html#toc11.216">stat/db <dbname> (5)</A>
+<H2><A NAME="ss11.218">11.218</A> <A HREF="adminmanual_en.html#toc11.218">stat/db <dbname> (5)</A>
</H2>
<P><CODE><B>stat/db <dbname></B> Show the status of a database</CODE></P>
<P>Show the internal status of a database descriptor.Depending on your privilege level you will see more or less information. This command is unlikely to be of much use to anyone other than a sysop.</P>
-<H2><A NAME="ss11.217">11.217</A> <A HREF="adminmanual_en.html#toc11.217">stat/msg (1)</A>
+<H2><A NAME="ss11.219">11.219</A> <A HREF="adminmanual_en.html#toc11.219">stat/msg (1)</A>
</H2>
<P><CODE><B>stat/msg</B> Show the status of the message system</CODE></P>
-<H2><A NAME="ss11.218">11.218</A> <A HREF="adminmanual_en.html#toc11.218">stat/msg <msgno> (1)</A>
+<H2><A NAME="ss11.220">11.220</A> <A HREF="adminmanual_en.html#toc11.220">stat/msg <msgno> (1)</A>
</H2>
<P><CODE><B>stat/msg <msgno></B> Show the status of a message</CODE></P>
<P>This command shows the internal status of a message and includes informationsuch as to whom it has been forwarded, its size, origin etc etc.If no message number is given then the status of the message system is displayed.</P>
-<H2><A NAME="ss11.219">11.219</A> <A HREF="adminmanual_en.html#toc11.219">stat/route_node <callsign> (5)</A>
+<H2><A NAME="ss11.221">11.221</A> <A HREF="adminmanual_en.html#toc11.221">stat/route_node <callsign> (5)</A>
</H2>
<P><CODE><B>stat/route_node <callsign></B> Show the data in a Route::Node object</CODE></P>
-<H2><A NAME="ss11.220">11.220</A> <A HREF="adminmanual_en.html#toc11.220">stat/route_node all (5)</A>
+<H2><A NAME="ss11.222">11.222</A> <A HREF="adminmanual_en.html#toc11.222">stat/route_node all (5)</A>
</H2>
<P><CODE><B>stat/route_node all</B> Show list of all Route::Node objects</CODE></P>
-<H2><A NAME="ss11.221">11.221</A> <A HREF="adminmanual_en.html#toc11.221">stat/route_user <callsign> (5)</A>
+<H2><A NAME="ss11.223">11.223</A> <A HREF="adminmanual_en.html#toc11.223">stat/route_user <callsign> (5)</A>
</H2>
<P><CODE><B>stat/route_user <callsign></B> Show the data in a Route::User object</CODE></P>
-<H2><A NAME="ss11.222">11.222</A> <A HREF="adminmanual_en.html#toc11.222">stat/route_user all (5)</A>
+<H2><A NAME="ss11.224">11.224</A> <A HREF="adminmanual_en.html#toc11.224">stat/route_user all (5)</A>
</H2>
<P><CODE><B>stat/route_user all</B> Show list of all Route::User objects</CODE></P>
-<H2><A NAME="ss11.223">11.223</A> <A HREF="adminmanual_en.html#toc11.223">stat/user [<callsign>] (5)</A>
+<H2><A NAME="ss11.225">11.225</A> <A HREF="adminmanual_en.html#toc11.225">stat/user [<callsign>] (5)</A>
</H2>
<P><CODE><B>stat/user [<callsign>]</B> Show the full status of a user</CODE></P>
<P>Shows the full contents of a user record including all the secret flagsand stuff.Only the fields that are defined (in perl term) will be displayed.</P>
-<H2><A NAME="ss11.224">11.224</A> <A HREF="adminmanual_en.html#toc11.224">sysop (0)</A>
+<H2><A NAME="ss11.226">11.226</A> <A HREF="adminmanual_en.html#toc11.226">sysop (0)</A>
</H2>
<P><CODE><B>sysop</B> Regain your privileges if you login remotely</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
They will all match. If there is no password you will still be offerednumbers but nothing will happen when you input a string. Any match iscase sensitive.</P>
-<H2><A NAME="ss11.225">11.225</A> <A HREF="adminmanual_en.html#toc11.225">talk <call> > <node> [<text>] (0)</A>
+<H2><A NAME="ss11.227">11.227</A> <A HREF="adminmanual_en.html#toc11.227">talk <call> > <node> [<text>] (0)</A>
</H2>
<P><CODE><B>talk <call> > <node> [<text>]</B> Send a text message to another station via a node</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
will send the hftable as you have it to all the people you are currently talking to.</P>
-<H2><A NAME="ss11.226">11.226</A> <A HREF="adminmanual_en.html#toc11.226">talk <call> [<text>] (0)</A>
+<H2><A NAME="ss11.228">11.228</A> <A HREF="adminmanual_en.html#toc11.228">talk <call> [<text>] (0)</A>
</H2>
<P><CODE><B>talk <call> [<text>]</B> Send a text message to another station</CODE></P>
-<H2><A NAME="ss11.227">11.227</A> <A HREF="adminmanual_en.html#toc11.227">type <filearea>/<name> (0)</A>
+<H2><A NAME="ss11.229">11.229</A> <A HREF="adminmanual_en.html#toc11.229">type <filearea>/<name> (0)</A>
</H2>
<P><CODE><B>type <filearea>/<name></B> Look at the contents of a file in one of the fileareas</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
See also SHOW/FILES to see what fileareas are available and a list of content.</P>
-<H2><A NAME="ss11.228">11.228</A> <A HREF="adminmanual_en.html#toc11.228">uncatchup <node call> all|[msgno> ...] (5)</A>
+<H2><A NAME="ss11.230">11.230</A> <A HREF="adminmanual_en.html#toc11.230">uncatchup <node call> all|[msgno> ...] (5)</A>
</H2>
<P><CODE><B>uncatchup <node call> all|[msgno> ...]</B> Unmark a message as sent</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
which will arrange for them to be forward candidates again.Order is not important.</P>
-<H2><A NAME="ss11.229">11.229</A> <A HREF="adminmanual_en.html#toc11.229">unset/announce (0)</A>
+<H2><A NAME="ss11.231">11.231</A> <A HREF="adminmanual_en.html#toc11.231">unset/announce (0)</A>
</H2>
<P><CODE><B>unset/announce</B> Stop announce messages coming out on your terminal</CODE></P>
-<H2><A NAME="ss11.230">11.230</A> <A HREF="adminmanual_en.html#toc11.230">unset/anntalk (0)</A>
+<H2><A NAME="ss11.232">11.232</A> <A HREF="adminmanual_en.html#toc11.232">unset/anntalk (0)</A>
</H2>
<P><CODE><B>unset/anntalk</B> Stop talk like announce messages on your terminal</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
allows you to see them again. This is the default.</P>
-<H2><A NAME="ss11.231">11.231</A> <A HREF="adminmanual_en.html#toc11.231">unset/baddx <call>.. (8)</A>
+<H2><A NAME="ss11.233">11.233</A> <A HREF="adminmanual_en.html#toc11.233">unset/baddx <call>.. (8)</A>
</H2>
<P><CODE><B>unset/baddx <call>..</B> Propagate a dx spot with this callsign again</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss11.232">11.232</A> <A HREF="adminmanual_en.html#toc11.232">unset/badnode <call>.. (8)</A>
+<H2><A NAME="ss11.234">11.234</A> <A HREF="adminmanual_en.html#toc11.234">unset/badnode <call>.. (8)</A>
</H2>
<P><CODE><B>unset/badnode <call>..</B> Allow spots from this node again</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
will allow spots from him again.Use with extreme care. This command may well be superceeded by FILTERing.</P>
-<H2><A NAME="ss11.233">11.233</A> <A HREF="adminmanual_en.html#toc11.233">unset/badspotter <call>.. (8)</A>
+<H2><A NAME="ss11.235">11.235</A> <A HREF="adminmanual_en.html#toc11.235">unset/badspotter <call>.. (8)</A>
</H2>
<P><CODE><B>unset/badspotter <call>..</B> Allow spots from this callsign again</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
will allow spots from him again.Use with extreme care. This command may well be superceded by FILTERing.</P>
-<H2><A NAME="ss11.234">11.234</A> <A HREF="adminmanual_en.html#toc11.234">unset/badword <word>.. (8)</A>
+<H2><A NAME="ss11.236">11.236</A> <A HREF="adminmanual_en.html#toc11.236">unset/badword <word>.. (8)</A>
</H2>
<P><CODE><B>unset/badword <word>..</B> Propagate things with this word again</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
will allow text with this word again.</P>
-<H2><A NAME="ss11.235">11.235</A> <A HREF="adminmanual_en.html#toc11.235">unset/beep (0)</A>
+<H2><A NAME="ss11.237">11.237</A> <A HREF="adminmanual_en.html#toc11.237">unset/beep (0)</A>
</H2>
<P><CODE><B>unset/beep</B> Stop beeps for DX and other messages on your terminal</CODE></P>
-<H2><A NAME="ss11.236">11.236</A> <A HREF="adminmanual_en.html#toc11.236">unset/debug <name> (9)</A>
+<H2><A NAME="ss11.238">11.238</A> <A HREF="adminmanual_en.html#toc11.238">unset/debug <name> (9)</A>
</H2>
<P><CODE><B>unset/debug <name></B> Remove a debug level from the debug set</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
You can show what levels you are logging with SHOW/DEBUG</P>
-<H2><A NAME="ss11.237">11.237</A> <A HREF="adminmanual_en.html#toc11.237">unset/dx (0)</A>
+<H2><A NAME="ss11.239">11.239</A> <A HREF="adminmanual_en.html#toc11.239">unset/dx (0)</A>
</H2>
<P><CODE><B>unset/dx</B> Stop DX messages coming out on your terminal</CODE></P>
-<H2><A NAME="ss11.238">11.238</A> <A HREF="adminmanual_en.html#toc11.238">unset/dxcq (0)</A>
+<H2><A NAME="ss11.240">11.240</A> <A HREF="adminmanual_en.html#toc11.240">unset/dxcq (0)</A>
</H2>
<P><CODE><B>unset/dxcq</B> Stop CQ Zones on the end of DX announcements</CODE></P>
<P>Display both the Spotter's and the Spotted's CQ Zone on the endof a DX announcement (there is just enough room). Some user programscannot cope with this. The Spotter's CQ is on the RHS of the time, the Spotted's CQ is on the LHS.Conflicts with: SET/DXGRID, SET/DXITU, SHOW/USSTATEDo a STAT/USER to see which flags you have set if you are confused. </P>
-<H2><A NAME="ss11.239">11.239</A> <A HREF="adminmanual_en.html#toc11.239">unset/dxgrid (0)</A>
+<H2><A NAME="ss11.241">11.241</A> <A HREF="adminmanual_en.html#toc11.241">unset/dxgrid (0)</A>
</H2>
<P><CODE><B>unset/dxgrid</B> Stop QRA Grid Squares on the end of DX announcements</CODE></P>
<P>A standard feature which is enabled in version 1.43 and above is that if the spotter's grid square is known it is output on the endof a DX announcement (there is just enough room). Some user programscannot cope with this. You can use this command to reset (or set)this feature.Conflicts with: SET/DXCQ, SET/DXITUDo a STAT/USER to see which flags you have set if you are confused. </P>
-<H2><A NAME="ss11.240">11.240</A> <A HREF="adminmanual_en.html#toc11.240">unset/dxitu (0)</A>
+<H2><A NAME="ss11.242">11.242</A> <A HREF="adminmanual_en.html#toc11.242">unset/dxitu (0)</A>
</H2>
<P><CODE><B>unset/dxitu</B> Stop ITU Zones on the end of DX announcements</CODE></P>
<P>Display both the Spotter's and the Spotted's ITU Zone on the endof a DX announcement (there is just enough room). Some user programscannot cope with this. The Spotter's ITU is on the RHS of the time, the Spotted's ITU is on the LHS.Conflicts with: SET/DXGRID, SET/DXCQ, SHOW/USSTATEDo a STAT/USER to see which flags you have set if you are confused. </P>
-<H2><A NAME="ss11.241">11.241</A> <A HREF="adminmanual_en.html#toc11.241">unset/echo (0)</A>
+<H2><A NAME="ss11.243">11.243</A> <A HREF="adminmanual_en.html#toc11.243">unset/echo (0)</A>
</H2>
<P><CODE><B>unset/echo</B> Stop the cluster echoing your input</CODE></P>
<P>If you are connected via a telnet session, different implimentationsof telnet handle echo differently depending on whether you are connected via port 23 or some other port. You can use this commandto change the setting appropriately. The setting is stored in your user profile.YOU DO NOT NEED TO USE THIS COMMAND IF YOU ARE CONNECTED VIA AX25.</P>
-<H2><A NAME="ss11.242">11.242</A> <A HREF="adminmanual_en.html#toc11.242">unset/email (0)</A>
+<H2><A NAME="ss11.244">11.244</A> <A HREF="adminmanual_en.html#toc11.244">unset/email (0)</A>
</H2>
<P><CODE><B>unset/email</B> Stop personal msgs being forwarded by email</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss11.243">11.243</A> <A HREF="adminmanual_en.html#toc11.243">unset/here (0)</A>
+<H2><A NAME="ss11.245">11.245</A> <A HREF="adminmanual_en.html#toc11.245">unset/here (0)</A>
</H2>
<P><CODE><B>unset/here</B> Tell the system you are absent from your terminal</CODE></P>
-<H2><A NAME="ss11.244">11.244</A> <A HREF="adminmanual_en.html#toc11.244">unset/hops <call> ann|spots|route|wwv|wcy (8)</A>
+<H2><A NAME="ss11.246">11.246</A> <A HREF="adminmanual_en.html#toc11.246">unset/hops <call> ann|spots|route|wwv|wcy (8)</A>
</H2>
<P><CODE><B>unset/hops <call> ann|spots|route|wwv|wcy</B> Unset hop count </CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss11.245">11.245</A> <A HREF="adminmanual_en.html#toc11.245">unset/isolate (9)</A>
+<H2><A NAME="ss11.247">11.247</A> <A HREF="adminmanual_en.html#toc11.247">unset/isolate (9)</A>
</H2>
<P><CODE><B>unset/isolate</B> Stop Isolation of a node from the rest of the network</CODE></P>
<P>Remove isolation from a node - SET/ISOLATE</P>
-<H2><A NAME="ss11.246">11.246</A> <A HREF="adminmanual_en.html#toc11.246">unset/lockout <call> (9)</A>
+<H2><A NAME="ss11.248">11.248</A> <A HREF="adminmanual_en.html#toc11.248">unset/lockout <call> (9)</A>
</H2>
<P><CODE><B>unset/lockout <call></B> Allow a callsign to connect to the cluster</CODE></P>
-<H2><A NAME="ss11.247">11.247</A> <A HREF="adminmanual_en.html#toc11.247">unset/logininfo (0)</A>
+<H2><A NAME="ss11.249">11.249</A> <A HREF="adminmanual_en.html#toc11.249">unset/logininfo (0)</A>
</H2>
<P><CODE><B>unset/logininfo</B> Inform when a station logs out locally</CODE></P>
-<H2><A NAME="ss11.248">11.248</A> <A HREF="adminmanual_en.html#toc11.248">unset/password <call> ... (9)</A>
+<H2><A NAME="ss11.250">11.250</A> <A HREF="adminmanual_en.html#toc11.250">unset/password <call> ... (9)</A>
</H2>
<P><CODE><B>unset/password <call> ...</B> Delete (remove) a user's password</CODE></P>
<P>This command allows the sysop to completely delete and remove a password for a user. </P>
-<H2><A NAME="ss11.249">11.249</A> <A HREF="adminmanual_en.html#toc11.249">unset/privilege (0)</A>
+<H2><A NAME="ss11.251">11.251</A> <A HREF="adminmanual_en.html#toc11.251">unset/privilege (0)</A>
</H2>
<P><CODE><B>unset/privilege</B> Remove any privilege for this session</CODE></P>
<P>You can use this command to 'protect' this session from unauthoriseduse. If you want to get your normal privilege back you will need toeither logout and login again (if you are on a console) or use theSYSOP command.</P>
-<H2><A NAME="ss11.250">11.250</A> <A HREF="adminmanual_en.html#toc11.250">unset/prompt (0)</A>
+<H2><A NAME="ss11.252">11.252</A> <A HREF="adminmanual_en.html#toc11.252">unset/prompt (0)</A>
</H2>
<P><CODE><B>unset/prompt</B> Set your prompt back to default</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
UNSET/PROMPT will undo the SET/PROMPT command and set you prompt back tonormal.</P>
-<H2><A NAME="ss11.251">11.251</A> <A HREF="adminmanual_en.html#toc11.251">unset/register <call> ... (9)</A>
+<H2><A NAME="ss11.253">11.253</A> <A HREF="adminmanual_en.html#toc11.253">unset/register <call> ... (9)</A>
</H2>
<P><CODE><B>unset/register <call> ...</B> Mark a user as not registered</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
command (usually in your startup file)If a user is NOT registered then, firstly, instead of the normalmotd file (/spider/data/motd) being sent to the user at startup, theuser is sent the motd_nor file instead. Secondly, the non registereduser only has READ-ONLY access to the node. The non-registered usercannot use DX, ANN etc. The only exception to this is that a non-registered user can TALK orSEND messages to the sysop.</P>
-<H2><A NAME="ss11.252">11.252</A> <A HREF="adminmanual_en.html#toc11.252">unset/talk (0)</A>
+<H2><A NAME="ss11.254">11.254</A> <A HREF="adminmanual_en.html#toc11.254">unset/talk (0)</A>
</H2>
<P><CODE><B>unset/talk</B> Stop TALK messages coming out on your terminal</CODE></P>
-<H2><A NAME="ss11.253">11.253</A> <A HREF="adminmanual_en.html#toc11.253">unset/usstate (0)</A>
+<H2><A NAME="ss11.255">11.255</A> <A HREF="adminmanual_en.html#toc11.255">unset/usstate (0)</A>
</H2>
<P><CODE><B>unset/usstate</B> Stop US State info on the end of DX announcements</CODE></P>
<P>If the spotter's or spotted's US State is known it is output on the end of a DX announcement (there is just enough room). A spotter's state will appear on the RHS of the time (like SET/DXGRID) and the spotted's State will appear on the LHS of thetime field. Any information found will override any locator information from SET/DXGRID.Some user programs cannot cope with this. You can use this command to reset (or set) this feature.Conflicts with: SET/DXCQ, SET/DXITUDo a STAT/USER to see which flags you have set if you are confused. </P>
-<H2><A NAME="ss11.254">11.254</A> <A HREF="adminmanual_en.html#toc11.254">unset/wcy (0)</A>
+<H2><A NAME="ss11.256">11.256</A> <A HREF="adminmanual_en.html#toc11.256">unset/wcy (0)</A>
</H2>
<P><CODE><B>unset/wcy</B> Stop WCY messages coming out on your terminal</CODE></P>
-<H2><A NAME="ss11.255">11.255</A> <A HREF="adminmanual_en.html#toc11.255">unset/wwv (0)</A>
+<H2><A NAME="ss11.257">11.257</A> <A HREF="adminmanual_en.html#toc11.257">unset/wwv (0)</A>
</H2>
<P><CODE><B>unset/wwv</B> Stop WWV messages coming out on your terminal</CODE></P>
-<H2><A NAME="ss11.256">11.256</A> <A HREF="adminmanual_en.html#toc11.256">unset/wx (0)</A>
+<H2><A NAME="ss11.258">11.258</A> <A HREF="adminmanual_en.html#toc11.258">unset/wx (0)</A>
</H2>
<P><CODE><B>unset/wx</B> Stop WX messages coming out on your terminal</CODE></P>
-<H2><A NAME="ss11.257">11.257</A> <A HREF="adminmanual_en.html#toc11.257">who (0)</A>
+<H2><A NAME="ss11.259">11.259</A> <A HREF="adminmanual_en.html#toc11.259">who (0)</A>
</H2>
<P><CODE><B>who</B> Show who is physically connected</CODE></P>
<P>This is a quick listing that shows which callsigns are connected andwhat sort of connection they have</P>
-<H2><A NAME="ss11.258">11.258</A> <A HREF="adminmanual_en.html#toc11.258">wx <text> (0)</A>
+<H2><A NAME="ss11.260">11.260</A> <A HREF="adminmanual_en.html#toc11.260">wx <text> (0)</A>
</H2>
<P><CODE><B>wx <text></B> Send a weather message to local users</CODE></P>
-<H2><A NAME="ss11.259">11.259</A> <A HREF="adminmanual_en.html#toc11.259">wx full <text> (0)</A>
+<H2><A NAME="ss11.261">11.261</A> <A HREF="adminmanual_en.html#toc11.261">wx full <text> (0)</A>
</H2>
<P><CODE><B>wx full <text></B> Send a weather message to all cluster users</CODE></P>
-<H2><A NAME="ss11.260">11.260</A> <A HREF="adminmanual_en.html#toc11.260">wx sysop <text> (5)</A>
+<H2><A NAME="ss11.262">11.262</A> <A HREF="adminmanual_en.html#toc11.262">wx sysop <text> (5)</A>
</H2>
<P><CODE><B>wx sysop <text></B> Send a weather message to other clusters only</CODE></P>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider Administration Manual v1.50: Other filters</TITLE>
<LINK HREF="adminmanual_en-3.html" REL=next>
<LINK HREF="adminmanual_en-1.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider Administration Manual v1.50: Mail</TITLE>
<LINK HREF="adminmanual_en-4.html" REL=next>
<LINK HREF="adminmanual_en-2.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider Administration Manual v1.50: Scripts</TITLE>
<LINK HREF="adminmanual_en-5.html" REL=next>
<LINK HREF="adminmanual_en-3.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider Administration Manual v1.50: Databases</TITLE>
<LINK HREF="adminmanual_en-6.html" REL=next>
<LINK HREF="adminmanual_en-4.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider Administration Manual v1.50: Information, files and useful programs</TITLE>
<LINK HREF="adminmanual_en-7.html" REL=next>
<LINK HREF="adminmanual_en-5.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider Administration Manual v1.50: Java Web applet</TITLE>
<LINK HREF="adminmanual_en-8.html" REL=next>
<LINK HREF="adminmanual_en-6.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider Administration Manual v1.50: Web based statistics</TITLE>
<LINK HREF="adminmanual_en-9.html" REL=next>
<LINK HREF="adminmanual_en-7.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider Administration Manual v1.50: Security</TITLE>
<LINK HREF="adminmanual_en-10.html" REL=next>
<LINK HREF="adminmanual_en-8.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider Administration Manual v1.50</TITLE>
<LINK HREF="adminmanual_en-1.html" REL=next>
<LI><A NAME="toc11.177">11.177</A> <A HREF="adminmanual_en-11.html#ss11.177">show/dxcc <prefix> (0)</A>
<LI><A NAME="toc11.178">11.178</A> <A HREF="adminmanual_en-11.html#ss11.178">show/dxqsl <callsign> (0)</A>
<LI><A NAME="toc11.179">11.179</A> <A HREF="adminmanual_en-11.html#ss11.179">show/dxstats [days] [date] (0)</A>
-<LI><A NAME="toc11.180">11.180</A> <A HREF="adminmanual_en-11.html#ss11.180">show/files [<filearea> [<string>]] (0)</A>
-<LI><A NAME="toc11.181">11.181</A> <A HREF="adminmanual_en-11.html#ss11.181">show/filter (0)</A>
-<LI><A NAME="toc11.182">11.182</A> <A HREF="adminmanual_en-11.html#ss11.182">show/hfstats [days] [date] (0)</A>
-<LI><A NAME="toc11.183">11.183</A> <A HREF="adminmanual_en-11.html#ss11.183">show/hftable [days] [date] [prefix ...] (0)</A>
-<LI><A NAME="toc11.184">11.184</A> <A HREF="adminmanual_en-11.html#ss11.184">show/hops <call> [ann|spots|route|wcy|wwv] (8)</A>
-<LI><A NAME="toc11.185">11.185</A> <A HREF="adminmanual_en-11.html#ss11.185">show/isolate (1)</A>
-<LI><A NAME="toc11.186">11.186</A> <A HREF="adminmanual_en-11.html#ss11.186">show/lockout <prefix>|all (9)</A>
-<LI><A NAME="toc11.187">11.187</A> <A HREF="adminmanual_en-11.html#ss11.187">show/log [<callsign>] (8)</A>
-<LI><A NAME="toc11.188">11.188</A> <A HREF="adminmanual_en-11.html#ss11.188">show/moon [ndays] [<prefix>|<callsign>] (0)</A>
-<LI><A NAME="toc11.189">11.189</A> <A HREF="adminmanual_en-11.html#ss11.189">show/muf <prefix> [<hours>][long] (0)</A>
-<LI><A NAME="toc11.190">11.190</A> <A HREF="adminmanual_en-11.html#ss11.190">show/newconfiguration [<node>] (0)</A>
-<LI><A NAME="toc11.191">11.191</A> <A HREF="adminmanual_en-11.html#ss11.191">show/newconfiguration/node (0)</A>
-<LI><A NAME="toc11.192">11.192</A> <A HREF="adminmanual_en-11.html#ss11.192">show/node [<callsign> ...] (1)</A>
-<LI><A NAME="toc11.193">11.193</A> <A HREF="adminmanual_en-11.html#ss11.193">show/prefix <callsign> (0)</A>
-<LI><A NAME="toc11.194">11.194</A> <A HREF="adminmanual_en-11.html#ss11.194">show/program (5)</A>
-<LI><A NAME="toc11.195">11.195</A> <A HREF="adminmanual_en-11.html#ss11.195">show/qra <lat> <long> (0)</A>
-<LI><A NAME="toc11.196">11.196</A> <A HREF="adminmanual_en-11.html#ss11.196">show/qra <locator> [<locator>] (0)</A>
-<LI><A NAME="toc11.197">11.197</A> <A HREF="adminmanual_en-11.html#ss11.197">show/qrz <callsign> (0)</A>
-<LI><A NAME="toc11.198">11.198</A> <A HREF="adminmanual_en-11.html#ss11.198">show/registered [<prefix>] (9)</A>
-<LI><A NAME="toc11.199">11.199</A> <A HREF="adminmanual_en-11.html#ss11.199">show/route <callsign> ... (0)</A>
-<LI><A NAME="toc11.200">11.200</A> <A HREF="adminmanual_en-11.html#ss11.200">show/satellite <name> [<hours> <interval>] (0)</A>
-<LI><A NAME="toc11.201">11.201</A> <A HREF="adminmanual_en-11.html#ss11.201">show/station all [<regex>] (6)</A>
-<LI><A NAME="toc11.202">11.202</A> <A HREF="adminmanual_en-11.html#ss11.202">show/station [<callsign> ..] (0)</A>
-<LI><A NAME="toc11.203">11.203</A> <A HREF="adminmanual_en-11.html#ss11.203">show/sun [ndays] [<prefix>|<callsign>] (0)</A>
-<LI><A NAME="toc11.204">11.204</A> <A HREF="adminmanual_en-11.html#ss11.204">show/time [<prefix>|<callsign>] (0)</A>
-<LI><A NAME="toc11.205">11.205</A> <A HREF="adminmanual_en-11.html#ss11.205">show/usdb [call ..] (0)</A>
-<LI><A NAME="toc11.206">11.206</A> <A HREF="adminmanual_en-11.html#ss11.206">show/vhfstats [days] [date] (0)</A>
-<LI><A NAME="toc11.207">11.207</A> <A HREF="adminmanual_en-11.html#ss11.207">show/vhftable [days] [date] [prefix ...] (0)</A>
-<LI><A NAME="toc11.208">11.208</A> <A HREF="adminmanual_en-11.html#ss11.208">show/wcy (0)</A>
-<LI><A NAME="toc11.209">11.209</A> <A HREF="adminmanual_en-11.html#ss11.209">show/wcy <n> (0)</A>
-<LI><A NAME="toc11.210">11.210</A> <A HREF="adminmanual_en-11.html#ss11.210">show/wm7d <callsign> (0)</A>
-<LI><A NAME="toc11.211">11.211</A> <A HREF="adminmanual_en-11.html#ss11.211">show/wwv (0)</A>
-<LI><A NAME="toc11.212">11.212</A> <A HREF="adminmanual_en-11.html#ss11.212">show/wwv <n> (0)</A>
-<LI><A NAME="toc11.213">11.213</A> <A HREF="adminmanual_en-11.html#ss11.213">shutdown (5)</A>
-<LI><A NAME="toc11.214">11.214</A> <A HREF="adminmanual_en-11.html#ss11.214">spoof <call> <command> (9)</A>
-<LI><A NAME="toc11.215">11.215</A> <A HREF="adminmanual_en-11.html#ss11.215">stat/channel [<callsign>] (5)</A>
-<LI><A NAME="toc11.216">11.216</A> <A HREF="adminmanual_en-11.html#ss11.216">stat/db <dbname> (5)</A>
-<LI><A NAME="toc11.217">11.217</A> <A HREF="adminmanual_en-11.html#ss11.217">stat/msg (1)</A>
-<LI><A NAME="toc11.218">11.218</A> <A HREF="adminmanual_en-11.html#ss11.218">stat/msg <msgno> (1)</A>
-<LI><A NAME="toc11.219">11.219</A> <A HREF="adminmanual_en-11.html#ss11.219">stat/route_node <callsign> (5)</A>
-<LI><A NAME="toc11.220">11.220</A> <A HREF="adminmanual_en-11.html#ss11.220">stat/route_node all (5)</A>
-<LI><A NAME="toc11.221">11.221</A> <A HREF="adminmanual_en-11.html#ss11.221">stat/route_user <callsign> (5)</A>
-<LI><A NAME="toc11.222">11.222</A> <A HREF="adminmanual_en-11.html#ss11.222">stat/route_user all (5)</A>
-<LI><A NAME="toc11.223">11.223</A> <A HREF="adminmanual_en-11.html#ss11.223">stat/user [<callsign>] (5)</A>
-<LI><A NAME="toc11.224">11.224</A> <A HREF="adminmanual_en-11.html#ss11.224">sysop (0)</A>
-<LI><A NAME="toc11.225">11.225</A> <A HREF="adminmanual_en-11.html#ss11.225">talk <call> > <node> [<text>] (0)</A>
-<LI><A NAME="toc11.226">11.226</A> <A HREF="adminmanual_en-11.html#ss11.226">talk <call> [<text>] (0)</A>
-<LI><A NAME="toc11.227">11.227</A> <A HREF="adminmanual_en-11.html#ss11.227">type <filearea>/<name> (0)</A>
-<LI><A NAME="toc11.228">11.228</A> <A HREF="adminmanual_en-11.html#ss11.228">uncatchup <node call> all|[msgno> ...] (5)</A>
-<LI><A NAME="toc11.229">11.229</A> <A HREF="adminmanual_en-11.html#ss11.229">unset/announce (0)</A>
-<LI><A NAME="toc11.230">11.230</A> <A HREF="adminmanual_en-11.html#ss11.230">unset/anntalk (0)</A>
-<LI><A NAME="toc11.231">11.231</A> <A HREF="adminmanual_en-11.html#ss11.231">unset/baddx <call>.. (8)</A>
-<LI><A NAME="toc11.232">11.232</A> <A HREF="adminmanual_en-11.html#ss11.232">unset/badnode <call>.. (8)</A>
-<LI><A NAME="toc11.233">11.233</A> <A HREF="adminmanual_en-11.html#ss11.233">unset/badspotter <call>.. (8)</A>
-<LI><A NAME="toc11.234">11.234</A> <A HREF="adminmanual_en-11.html#ss11.234">unset/badword <word>.. (8)</A>
-<LI><A NAME="toc11.235">11.235</A> <A HREF="adminmanual_en-11.html#ss11.235">unset/beep (0)</A>
-<LI><A NAME="toc11.236">11.236</A> <A HREF="adminmanual_en-11.html#ss11.236">unset/debug <name> (9)</A>
-<LI><A NAME="toc11.237">11.237</A> <A HREF="adminmanual_en-11.html#ss11.237">unset/dx (0)</A>
-<LI><A NAME="toc11.238">11.238</A> <A HREF="adminmanual_en-11.html#ss11.238">unset/dxcq (0)</A>
-<LI><A NAME="toc11.239">11.239</A> <A HREF="adminmanual_en-11.html#ss11.239">unset/dxgrid (0)</A>
-<LI><A NAME="toc11.240">11.240</A> <A HREF="adminmanual_en-11.html#ss11.240">unset/dxitu (0)</A>
-<LI><A NAME="toc11.241">11.241</A> <A HREF="adminmanual_en-11.html#ss11.241">unset/echo (0)</A>
-<LI><A NAME="toc11.242">11.242</A> <A HREF="adminmanual_en-11.html#ss11.242">unset/email (0)</A>
-<LI><A NAME="toc11.243">11.243</A> <A HREF="adminmanual_en-11.html#ss11.243">unset/here (0)</A>
-<LI><A NAME="toc11.244">11.244</A> <A HREF="adminmanual_en-11.html#ss11.244">unset/hops <call> ann|spots|route|wwv|wcy (8)</A>
-<LI><A NAME="toc11.245">11.245</A> <A HREF="adminmanual_en-11.html#ss11.245">unset/isolate (9)</A>
-<LI><A NAME="toc11.246">11.246</A> <A HREF="adminmanual_en-11.html#ss11.246">unset/lockout <call> (9)</A>
-<LI><A NAME="toc11.247">11.247</A> <A HREF="adminmanual_en-11.html#ss11.247">unset/logininfo (0)</A>
-<LI><A NAME="toc11.248">11.248</A> <A HREF="adminmanual_en-11.html#ss11.248">unset/password <call> ... (9)</A>
-<LI><A NAME="toc11.249">11.249</A> <A HREF="adminmanual_en-11.html#ss11.249">unset/privilege (0)</A>
-<LI><A NAME="toc11.250">11.250</A> <A HREF="adminmanual_en-11.html#ss11.250">unset/prompt (0)</A>
-<LI><A NAME="toc11.251">11.251</A> <A HREF="adminmanual_en-11.html#ss11.251">unset/register <call> ... (9)</A>
-<LI><A NAME="toc11.252">11.252</A> <A HREF="adminmanual_en-11.html#ss11.252">unset/talk (0)</A>
-<LI><A NAME="toc11.253">11.253</A> <A HREF="adminmanual_en-11.html#ss11.253">unset/usstate (0)</A>
-<LI><A NAME="toc11.254">11.254</A> <A HREF="adminmanual_en-11.html#ss11.254">unset/wcy (0)</A>
-<LI><A NAME="toc11.255">11.255</A> <A HREF="adminmanual_en-11.html#ss11.255">unset/wwv (0)</A>
-<LI><A NAME="toc11.256">11.256</A> <A HREF="adminmanual_en-11.html#ss11.256">unset/wx (0)</A>
-<LI><A NAME="toc11.257">11.257</A> <A HREF="adminmanual_en-11.html#ss11.257">who (0)</A>
-<LI><A NAME="toc11.258">11.258</A> <A HREF="adminmanual_en-11.html#ss11.258">wx <text> (0)</A>
-<LI><A NAME="toc11.259">11.259</A> <A HREF="adminmanual_en-11.html#ss11.259">wx full <text> (0)</A>
-<LI><A NAME="toc11.260">11.260</A> <A HREF="adminmanual_en-11.html#ss11.260">wx sysop <text> (5)</A>
+<LI><A NAME="toc11.180">11.180</A> <A HREF="adminmanual_en-11.html#ss11.180">show/fdx (0)</A>
+<LI><A NAME="toc11.181">11.181</A> <A HREF="adminmanual_en-11.html#ss11.181">show/files [<filearea> [<string>]] (0)</A>
+<LI><A NAME="toc11.182">11.182</A> <A HREF="adminmanual_en-11.html#ss11.182">show/filter (0)</A>
+<LI><A NAME="toc11.183">11.183</A> <A HREF="adminmanual_en-11.html#ss11.183">show/hfstats [days] [date] (0)</A>
+<LI><A NAME="toc11.184">11.184</A> <A HREF="adminmanual_en-11.html#ss11.184">show/hftable [days] [date] [prefix ...] (0)</A>
+<LI><A NAME="toc11.185">11.185</A> <A HREF="adminmanual_en-11.html#ss11.185">show/hops <call> [ann|spots|route|wcy|wwv] (8)</A>
+<LI><A NAME="toc11.186">11.186</A> <A HREF="adminmanual_en-11.html#ss11.186">show/isolate (1)</A>
+<LI><A NAME="toc11.187">11.187</A> <A HREF="adminmanual_en-11.html#ss11.187">show/lockout <prefix>|all (9)</A>
+<LI><A NAME="toc11.188">11.188</A> <A HREF="adminmanual_en-11.html#ss11.188">show/log [<callsign>] (8)</A>
+<LI><A NAME="toc11.189">11.189</A> <A HREF="adminmanual_en-11.html#ss11.189">show/moon [ndays] [<prefix>|<callsign>] (0)</A>
+<LI><A NAME="toc11.190">11.190</A> <A HREF="adminmanual_en-11.html#ss11.190">show/muf <prefix> [<hours>][long] (0)</A>
+<LI><A NAME="toc11.191">11.191</A> <A HREF="adminmanual_en-11.html#ss11.191">show/mydx (0)</A>
+<LI><A NAME="toc11.192">11.192</A> <A HREF="adminmanual_en-11.html#ss11.192">show/newconfiguration [<node>] (0)</A>
+<LI><A NAME="toc11.193">11.193</A> <A HREF="adminmanual_en-11.html#ss11.193">show/newconfiguration/node (0)</A>
+<LI><A NAME="toc11.194">11.194</A> <A HREF="adminmanual_en-11.html#ss11.194">show/node [<callsign> ...] (1)</A>
+<LI><A NAME="toc11.195">11.195</A> <A HREF="adminmanual_en-11.html#ss11.195">show/prefix <callsign> (0)</A>
+<LI><A NAME="toc11.196">11.196</A> <A HREF="adminmanual_en-11.html#ss11.196">show/program (5)</A>
+<LI><A NAME="toc11.197">11.197</A> <A HREF="adminmanual_en-11.html#ss11.197">show/qra <lat> <long> (0)</A>
+<LI><A NAME="toc11.198">11.198</A> <A HREF="adminmanual_en-11.html#ss11.198">show/qra <locator> [<locator>] (0)</A>
+<LI><A NAME="toc11.199">11.199</A> <A HREF="adminmanual_en-11.html#ss11.199">show/qrz <callsign> (0)</A>
+<LI><A NAME="toc11.200">11.200</A> <A HREF="adminmanual_en-11.html#ss11.200">show/registered [<prefix>] (9)</A>
+<LI><A NAME="toc11.201">11.201</A> <A HREF="adminmanual_en-11.html#ss11.201">show/route <callsign> ... (0)</A>
+<LI><A NAME="toc11.202">11.202</A> <A HREF="adminmanual_en-11.html#ss11.202">show/satellite <name> [<hours> <interval>] (0)</A>
+<LI><A NAME="toc11.203">11.203</A> <A HREF="adminmanual_en-11.html#ss11.203">show/station all [<regex>] (6)</A>
+<LI><A NAME="toc11.204">11.204</A> <A HREF="adminmanual_en-11.html#ss11.204">show/station [<callsign> ..] (0)</A>
+<LI><A NAME="toc11.205">11.205</A> <A HREF="adminmanual_en-11.html#ss11.205">show/sun [ndays] [<prefix>|<callsign>] (0)</A>
+<LI><A NAME="toc11.206">11.206</A> <A HREF="adminmanual_en-11.html#ss11.206">show/time [<prefix>|<callsign>] (0)</A>
+<LI><A NAME="toc11.207">11.207</A> <A HREF="adminmanual_en-11.html#ss11.207">show/usdb [call ..] (0)</A>
+<LI><A NAME="toc11.208">11.208</A> <A HREF="adminmanual_en-11.html#ss11.208">show/vhfstats [days] [date] (0)</A>
+<LI><A NAME="toc11.209">11.209</A> <A HREF="adminmanual_en-11.html#ss11.209">show/vhftable [days] [date] [prefix ...] (0)</A>
+<LI><A NAME="toc11.210">11.210</A> <A HREF="adminmanual_en-11.html#ss11.210">show/wcy (0)</A>
+<LI><A NAME="toc11.211">11.211</A> <A HREF="adminmanual_en-11.html#ss11.211">show/wcy <n> (0)</A>
+<LI><A NAME="toc11.212">11.212</A> <A HREF="adminmanual_en-11.html#ss11.212">show/wm7d <callsign> (0)</A>
+<LI><A NAME="toc11.213">11.213</A> <A HREF="adminmanual_en-11.html#ss11.213">show/wwv (0)</A>
+<LI><A NAME="toc11.214">11.214</A> <A HREF="adminmanual_en-11.html#ss11.214">show/wwv <n> (0)</A>
+<LI><A NAME="toc11.215">11.215</A> <A HREF="adminmanual_en-11.html#ss11.215">shutdown (5)</A>
+<LI><A NAME="toc11.216">11.216</A> <A HREF="adminmanual_en-11.html#ss11.216">spoof <call> <command> (9)</A>
+<LI><A NAME="toc11.217">11.217</A> <A HREF="adminmanual_en-11.html#ss11.217">stat/channel [<callsign>] (5)</A>
+<LI><A NAME="toc11.218">11.218</A> <A HREF="adminmanual_en-11.html#ss11.218">stat/db <dbname> (5)</A>
+<LI><A NAME="toc11.219">11.219</A> <A HREF="adminmanual_en-11.html#ss11.219">stat/msg (1)</A>
+<LI><A NAME="toc11.220">11.220</A> <A HREF="adminmanual_en-11.html#ss11.220">stat/msg <msgno> (1)</A>
+<LI><A NAME="toc11.221">11.221</A> <A HREF="adminmanual_en-11.html#ss11.221">stat/route_node <callsign> (5)</A>
+<LI><A NAME="toc11.222">11.222</A> <A HREF="adminmanual_en-11.html#ss11.222">stat/route_node all (5)</A>
+<LI><A NAME="toc11.223">11.223</A> <A HREF="adminmanual_en-11.html#ss11.223">stat/route_user <callsign> (5)</A>
+<LI><A NAME="toc11.224">11.224</A> <A HREF="adminmanual_en-11.html#ss11.224">stat/route_user all (5)</A>
+<LI><A NAME="toc11.225">11.225</A> <A HREF="adminmanual_en-11.html#ss11.225">stat/user [<callsign>] (5)</A>
+<LI><A NAME="toc11.226">11.226</A> <A HREF="adminmanual_en-11.html#ss11.226">sysop (0)</A>
+<LI><A NAME="toc11.227">11.227</A> <A HREF="adminmanual_en-11.html#ss11.227">talk <call> > <node> [<text>] (0)</A>
+<LI><A NAME="toc11.228">11.228</A> <A HREF="adminmanual_en-11.html#ss11.228">talk <call> [<text>] (0)</A>
+<LI><A NAME="toc11.229">11.229</A> <A HREF="adminmanual_en-11.html#ss11.229">type <filearea>/<name> (0)</A>
+<LI><A NAME="toc11.230">11.230</A> <A HREF="adminmanual_en-11.html#ss11.230">uncatchup <node call> all|[msgno> ...] (5)</A>
+<LI><A NAME="toc11.231">11.231</A> <A HREF="adminmanual_en-11.html#ss11.231">unset/announce (0)</A>
+<LI><A NAME="toc11.232">11.232</A> <A HREF="adminmanual_en-11.html#ss11.232">unset/anntalk (0)</A>
+<LI><A NAME="toc11.233">11.233</A> <A HREF="adminmanual_en-11.html#ss11.233">unset/baddx <call>.. (8)</A>
+<LI><A NAME="toc11.234">11.234</A> <A HREF="adminmanual_en-11.html#ss11.234">unset/badnode <call>.. (8)</A>
+<LI><A NAME="toc11.235">11.235</A> <A HREF="adminmanual_en-11.html#ss11.235">unset/badspotter <call>.. (8)</A>
+<LI><A NAME="toc11.236">11.236</A> <A HREF="adminmanual_en-11.html#ss11.236">unset/badword <word>.. (8)</A>
+<LI><A NAME="toc11.237">11.237</A> <A HREF="adminmanual_en-11.html#ss11.237">unset/beep (0)</A>
+<LI><A NAME="toc11.238">11.238</A> <A HREF="adminmanual_en-11.html#ss11.238">unset/debug <name> (9)</A>
+<LI><A NAME="toc11.239">11.239</A> <A HREF="adminmanual_en-11.html#ss11.239">unset/dx (0)</A>
+<LI><A NAME="toc11.240">11.240</A> <A HREF="adminmanual_en-11.html#ss11.240">unset/dxcq (0)</A>
+<LI><A NAME="toc11.241">11.241</A> <A HREF="adminmanual_en-11.html#ss11.241">unset/dxgrid (0)</A>
+<LI><A NAME="toc11.242">11.242</A> <A HREF="adminmanual_en-11.html#ss11.242">unset/dxitu (0)</A>
+<LI><A NAME="toc11.243">11.243</A> <A HREF="adminmanual_en-11.html#ss11.243">unset/echo (0)</A>
+<LI><A NAME="toc11.244">11.244</A> <A HREF="adminmanual_en-11.html#ss11.244">unset/email (0)</A>
+<LI><A NAME="toc11.245">11.245</A> <A HREF="adminmanual_en-11.html#ss11.245">unset/here (0)</A>
+<LI><A NAME="toc11.246">11.246</A> <A HREF="adminmanual_en-11.html#ss11.246">unset/hops <call> ann|spots|route|wwv|wcy (8)</A>
+<LI><A NAME="toc11.247">11.247</A> <A HREF="adminmanual_en-11.html#ss11.247">unset/isolate (9)</A>
+<LI><A NAME="toc11.248">11.248</A> <A HREF="adminmanual_en-11.html#ss11.248">unset/lockout <call> (9)</A>
+<LI><A NAME="toc11.249">11.249</A> <A HREF="adminmanual_en-11.html#ss11.249">unset/logininfo (0)</A>
+<LI><A NAME="toc11.250">11.250</A> <A HREF="adminmanual_en-11.html#ss11.250">unset/password <call> ... (9)</A>
+<LI><A NAME="toc11.251">11.251</A> <A HREF="adminmanual_en-11.html#ss11.251">unset/privilege (0)</A>
+<LI><A NAME="toc11.252">11.252</A> <A HREF="adminmanual_en-11.html#ss11.252">unset/prompt (0)</A>
+<LI><A NAME="toc11.253">11.253</A> <A HREF="adminmanual_en-11.html#ss11.253">unset/register <call> ... (9)</A>
+<LI><A NAME="toc11.254">11.254</A> <A HREF="adminmanual_en-11.html#ss11.254">unset/talk (0)</A>
+<LI><A NAME="toc11.255">11.255</A> <A HREF="adminmanual_en-11.html#ss11.255">unset/usstate (0)</A>
+<LI><A NAME="toc11.256">11.256</A> <A HREF="adminmanual_en-11.html#ss11.256">unset/wcy (0)</A>
+<LI><A NAME="toc11.257">11.257</A> <A HREF="adminmanual_en-11.html#ss11.257">unset/wwv (0)</A>
+<LI><A NAME="toc11.258">11.258</A> <A HREF="adminmanual_en-11.html#ss11.258">unset/wx (0)</A>
+<LI><A NAME="toc11.259">11.259</A> <A HREF="adminmanual_en-11.html#ss11.259">who (0)</A>
+<LI><A NAME="toc11.260">11.260</A> <A HREF="adminmanual_en-11.html#ss11.260">wx <text> (0)</A>
+<LI><A NAME="toc11.261">11.261</A> <A HREF="adminmanual_en-11.html#ss11.261">wx full <text> (0)</A>
+<LI><A NAME="toc11.262">11.262</A> <A HREF="adminmanual_en-11.html#ss11.262">wx sysop <text> (5)</A>
</UL>
<HR>
<A HREF="adminmanual_en-1.html">Next</A>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider User Filtering Primer v1.0: Introduction.</TITLE>
<LINK HREF="filtering_en-2.html" REL=next>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider User Filtering Primer v1.0: Contacts</TITLE>
<LINK HREF="filtering_en-9.html" REL=previous>
<LINK HREF="filtering_en.html#toc10" REL=contents>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider User Filtering Primer v1.0: Foreword</TITLE>
<LINK HREF="filtering_en-3.html" REL=next>
<LINK HREF="filtering_en-1.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider User Filtering Primer v1.0: Configuring Spot Filters</TITLE>
<LINK HREF="filtering_en-4.html" REL=next>
<LINK HREF="filtering_en-2.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider User Filtering Primer v1.0: Types of spot filters used in DXSpider </TITLE>
<LINK HREF="filtering_en-5.html" REL=next>
<LINK HREF="filtering_en-3.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider User Filtering Primer v1.0: Reject filters </TITLE>
<LINK HREF="filtering_en-6.html" REL=next>
<LINK HREF="filtering_en-4.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider User Filtering Primer v1.0: Filters to reject spots based on frequency</TITLE>
<LINK HREF="filtering_en-7.html" REL=next>
<LINK HREF="filtering_en-5.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider User Filtering Primer v1.0: Accept filters </TITLE>
<LINK HREF="filtering_en-8.html" REL=next>
<LINK HREF="filtering_en-6.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider User Filtering Primer v1.0: Clear filters </TITLE>
<LINK HREF="filtering_en-9.html" REL=next>
<LINK HREF="filtering_en-7.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider User Filtering Primer v1.0: Some Practice Examples </TITLE>
<LINK HREF="filtering_en-10.html" REL=next>
<LINK HREF="filtering_en-8.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider User Filtering Primer v1.0</TITLE>
<LINK HREF="filtering_en-1.html" REL=next>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider Installation Manual v1.50: Linux Installation </TITLE>
<LINK HREF="installation_en-2.html" REL=next>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider Installation Manual v1.50: Linux quick installation guide</TITLE>
<LINK HREF="installation_en-3.html" REL=next>
<LINK HREF="installation_en-1.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider Installation Manual v1.50: Setting up the AX25 Utilities</TITLE>
<LINK HREF="installation_en-4.html" REL=next>
<LINK HREF="installation_en-2.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider Installation Manual v1.50: Configuration</TITLE>
<LINK HREF="installation_en-5.html" REL=next>
<LINK HREF="installation_en-3.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider Installation Manual v1.50: Microsoft Windows Installation</TITLE>
<LINK HREF="installation_en-6.html" REL=next>
<LINK HREF="installation_en-4.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider Installation Manual v1.50: Installing the software</TITLE>
<LINK HREF="installation_en-7.html" REL=next>
<LINK HREF="installation_en-5.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider Installation Manual v1.50: General Information</TITLE>
<LINK HREF="installation_en-6.html" REL=previous>
<LINK HREF="installation_en.html#toc7" REL=contents>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider Installation Manual v1.50</TITLE>
<LINK HREF="installation_en-1.html" REL=next>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider CVS Changes Addendum v1.50</TITLE>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider FAQ: Installation </TITLE>
<LINK HREF="spiderFAQ_en-2.html" REL=next>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider FAQ: Administration</TITLE>
<LINK HREF="spiderFAQ_en-1.html" REL=previous>
<LINK HREF="spiderFAQ_en.html#toc2" REL=contents>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider FAQ</TITLE>
<LINK HREF="spiderFAQ_en-1.html" REL=next>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider User Manual v1.50: Introduction</TITLE>
<LINK HREF="usermanual_en-2.html" REL=next>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider User Manual v1.50: Filtering (From version 1.45)</TITLE>
<LINK HREF="usermanual_en-11.html" REL=next>
<LINK HREF="usermanual_en-9.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider User Manual v1.50: Hints, tips and common questions.</TITLE>
<LINK HREF="usermanual_en-12.html" REL=next>
<LINK HREF="usermanual_en-10.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider User Manual v1.50: The DXSpider Command Reference</TITLE>
<LINK HREF="usermanual_en-11.html" REL=previous>
<LINK HREF="usermanual_en.html#toc12" REL=contents>
</P>
<P>
<BLOCKQUOTE><CODE>
+<PRE>
+ real or rt - Format the output the same as for real time spots. The
+ formats are deliberately different (so you can tell
+ one sort from the other). This is useful for some
+ logging programs that can't cope with normal sh/dx
+ output. An alias of SHOW/FDX is available.
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ filter - Filter the spots, before output, with the user's
+ spot filter. An alias of SHOW/MYDX is available.
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ zone <zones> - look for spots in the cq zone (or zones) specified.
+ zones are numbers separated by commas.
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ by_zone <zones> - look for spots spotted by people in the cq zone
+ specified.
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ itu <itus> - look for spots in the itu zone (or zones) specified
+ itu zones are numbers separated by commas.
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ by_itu <itus> - look for spots spotted by people in the itu zone
+ specified.
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ state <list> - look for spots in the US state (or states) specified
+ The list is two letter state codes separated by commas.
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ by_state <list> - look for spots spotted by people in the US state
+ specified.
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>
+<BLOCKQUOTE><CODE>
<PRE>
e.g.
</PRE>
SH/DX qra jn86
SH/DX dxcc oq2
SH/DX dxcc oq2 by w dxcc
+ SH/DX zone 4,5,6
+ SH/DX by_zone 4,5,6
+ SH/DX state in,oh
+ SH/DX by_state in,oh
</PRE>
</CODE></BLOCKQUOTE>
</P>
</PRE>
</CODE></BLOCKQUOTE>
</P>
-
+<P>This is an alias for: SH/DX dxcc</P>
<H2><A NAME="ss12.91">12.91</A> <A HREF="usermanual_en.html#toc12.91">show/dxqsl <callsign></A>
</H2>
<P>Show the total DX spots for the last <days> no of days (default is 31),
starting from a <date> (default: today).</P>
-<H2><A NAME="ss12.93">12.93</A> <A HREF="usermanual_en.html#toc12.93">show/files [<filearea> [<string>]]</A>
+<H2><A NAME="ss12.93">12.93</A> <A HREF="usermanual_en.html#toc12.93">show/fdx</A>
+</H2>
+
+<P><CODE><B>show/fdx</B> Show the DX data in realtime format.</CODE></P>
+
+<P>Normally SHOW/DX outputs spot data in a different format to the
+realtime data. This is a deliberate policy (so you can tell the
+difference between the two). Some logging programs cannot handle
+this so SHOW/FDX outputs historical data in real time format.</P>
+<P>This is an alias for: SHOW/DX real</P>
+<H2><A NAME="ss12.94">12.94</A> <A HREF="usermanual_en.html#toc12.94">show/files [<filearea> [<string>]]</A>
</H2>
<P><CODE><B>show/files [<filearea> [<string>]]</B> List the contents of a filearea</CODE></P>
</CODE></BLOCKQUOTE>
</P>
<P>See also TYPE - to see the contents of a file.</P>
-<H2><A NAME="ss12.94">12.94</A> <A HREF="usermanual_en.html#toc12.94">show/filter</A>
+<H2><A NAME="ss12.95">12.95</A> <A HREF="usermanual_en.html#toc12.95">show/filter</A>
</H2>
<P><CODE><B>show/filter</B> Show the contents of all the filters you have set</CODE></P>
<P>Show the contents of all the filters that are set. This command displays
all the filters set - for all the various categories.</P>
-<H2><A NAME="ss12.95">12.95</A> <A HREF="usermanual_en.html#toc12.95">show/hfstats [days] [date]</A>
+<H2><A NAME="ss12.96">12.96</A> <A HREF="usermanual_en.html#toc12.96">show/hfstats [days] [date]</A>
</H2>
<P><CODE><B>show/hfstats [days] [date]</B> Show the HF DX Statistics </CODE></P>
<P>Show the HF DX spots breakdown by band for the last <days> no of days
(default is 31), starting from a <date> (default: today).</P>
-<H2><A NAME="ss12.96">12.96</A> <A HREF="usermanual_en.html#toc12.96">show/hftable [days] [date] [prefix ...]</A>
+<H2><A NAME="ss12.97">12.97</A> <A HREF="usermanual_en.html#toc12.97">show/hftable [days] [date] [prefix ...]</A>
</H2>
<P><CODE><B>show/hftable [days] [date] [prefix ...]</B> Show the HF DX Spotter Table</CODE></P>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss12.97">12.97</A> <A HREF="usermanual_en.html#toc12.97">show/moon [ndays] [<prefix>|<callsign>]</A>
+<H2><A NAME="ss12.98">12.98</A> <A HREF="usermanual_en.html#toc12.98">show/moon [ndays] [<prefix>|<callsign>]</A>
</H2>
<P><CODE><B>show/moon [ndays] [<prefix>|<callsign>]</B> Show Moon rise and set times</CODE></P>
<P>Upto 366 days can be checked both in the past and in the future.</P>
<P>Please note that the rise and set times are given as the UT times of rise and
set on the requested UT day.</P>
-<H2><A NAME="ss12.98">12.98</A> <A HREF="usermanual_en.html#toc12.98">show/muf <prefix> [<hours>][long]</A>
+<H2><A NAME="ss12.99">12.99</A> <A HREF="usermanual_en.html#toc12.99">show/muf <prefix> [<hours>][long]</A>
</H2>
<P><CODE><B>show/muf <prefix> [<hours>][long]</B> Show the likely propagation to a prefix</CODE></P>
<P>Gives you an estimate of the long path propagation characterics. It
should be noted that the figures will probably not be very useful, nor
terrible accurate, but it is included for completeness.</P>
-<H2><A NAME="ss12.99">12.99</A> <A HREF="usermanual_en.html#toc12.99">show/newconfiguration [<node>]</A>
+<H2><A NAME="ss12.100">12.100</A> <A HREF="usermanual_en.html#toc12.100">show/mydx</A>
+</H2>
+
+<P><CODE><B>show/mydx</B> Show the DX data filtered with your spot filter.</CODE></P>
+
+<P>SHOW/DX potentially shows all the spots available in the system. Using
+SHOW/MYDX will, instead, filter the availble spots using any spot filter
+that you have set, first. </P>
+<P>This command, together with ACCEPT/SPOT or REJECT/SPOT, will allow
+you to customise the spots that you receive.</P>
+<P>So if you have said: ACC/SPOT on hf</P>
+<P>Doing a SHOW/MYDX will now only, ever, show HF spots. All the other
+options on SH/DX can still be used.</P>
+<H2><A NAME="ss12.101">12.101</A> <A HREF="usermanual_en.html#toc12.101">show/newconfiguration [<node>]</A>
</H2>
<P><CODE><B>show/newconfiguration [<node>]</B> Show all the nodes and users visible</CODE></P>
which may not take up quite as much space if you don't have any
loops.</P>
<P>BE WARNED: the list that is returned can be VERY long</P>
-<H2><A NAME="ss12.100">12.100</A> <A HREF="usermanual_en.html#toc12.100">show/newconfiguration/node</A>
+<H2><A NAME="ss12.102">12.102</A> <A HREF="usermanual_en.html#toc12.102">show/newconfiguration/node</A>
</H2>
<P><CODE><B>show/newconfiguration/node</B> Show all the nodes connected locally</CODE></P>
<P>Show all the nodes connected to this node in the new format.</P>
-<H2><A NAME="ss12.101">12.101</A> <A HREF="usermanual_en.html#toc12.101">show/prefix <callsign></A>
+<H2><A NAME="ss12.103">12.103</A> <A HREF="usermanual_en.html#toc12.103">show/prefix <callsign></A>
</H2>
<P><CODE><B>show/prefix <callsign></B> Interrogate the prefix database </CODE></P>
it is and then displays all the relevant prefixes for that country
together with the internal country no, the CQ and ITU regions. </P>
<P>See also SHOW/DXCC</P>
-<H2><A NAME="ss12.102">12.102</A> <A HREF="usermanual_en.html#toc12.102">show/qra <lat> <long></A>
+<H2><A NAME="ss12.104">12.104</A> <A HREF="usermanual_en.html#toc12.104">show/qra <lat> <long></A>
</H2>
<P><CODE><B>show/qra <lat> <long></B> Convert lat/long to a QRA Grid locator</CODE></P>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss12.103">12.103</A> <A HREF="usermanual_en.html#toc12.103">show/qra <locator> [<locator>]</A>
+<H2><A NAME="ss12.105">12.105</A> <A HREF="usermanual_en.html#toc12.105">show/qra <locator> [<locator>]</A>
</H2>
<P><CODE><B>show/qra <locator> [<locator>]</B> Show distance between QRA Grid locators</CODE></P>
-<H2><A NAME="ss12.104">12.104</A> <A HREF="usermanual_en.html#toc12.104">show/qrz <callsign></A>
+<H2><A NAME="ss12.106">12.106</A> <A HREF="usermanual_en.html#toc12.106">show/qrz <callsign></A>
</H2>
<P><CODE><B>show/qrz <callsign></B> Show any callbook details on a callsign</CODE></P>
and returns any information available for that callsign. This service
is provided for users of this software by http://www.qrz.com </P>
<P>See also SHOW/WM7D for an alternative.</P>
-<H2><A NAME="ss12.105">12.105</A> <A HREF="usermanual_en.html#toc12.105">show/route <callsign> ...</A>
+<H2><A NAME="ss12.107">12.107</A> <A HREF="usermanual_en.html#toc12.107">show/route <callsign> ...</A>
</H2>
<P><CODE><B>show/route <callsign> ...</B> Show the route to the callsign</CODE></P>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss12.106">12.106</A> <A HREF="usermanual_en.html#toc12.106">show/satellite <name> [<hours> <interval>]</A>
+<H2><A NAME="ss12.108">12.108</A> <A HREF="usermanual_en.html#toc12.108">show/satellite <name> [<hours> <interval>]</A>
</H2>
<P><CODE><B>show/satellite <name> [<hours> <interval>]</B> Show tracking data</CODE></P>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss12.107">12.107</A> <A HREF="usermanual_en.html#toc12.107">show/station [<callsign> ..]</A>
+<H2><A NAME="ss12.109">12.109</A> <A HREF="usermanual_en.html#toc12.109">show/station [<callsign> ..]</A>
</H2>
<P><CODE><B>show/station [<callsign> ..]</B> Show information about a callsign</CODE></P>
</CODE></BLOCKQUOTE>
</P>
<P>If no callsign is given then show the information for yourself.</P>
-<H2><A NAME="ss12.108">12.108</A> <A HREF="usermanual_en.html#toc12.108">show/sun [ndays] [<prefix>|<callsign>]</A>
+<H2><A NAME="ss12.110">12.110</A> <A HREF="usermanual_en.html#toc12.110">show/sun [ndays] [<prefix>|<callsign>]</A>
</H2>
<P><CODE><B>show/sun [ndays] [<prefix>|<callsign>]</B> Show sun rise and set times</CODE></P>
<P>Upto 366 days can be checked both in the past and in the future.</P>
<P>Please note that the rise and set times are given as the UT times of rise
and set on the requested UT day.</P>
-<H2><A NAME="ss12.109">12.109</A> <A HREF="usermanual_en.html#toc12.109">show/time [<prefix>|<callsign>]</A>
+<H2><A NAME="ss12.111">12.111</A> <A HREF="usermanual_en.html#toc12.111">show/time [<prefix>|<callsign>]</A>
</H2>
<P><CODE><B>show/time [<prefix>|<callsign>]</B> Show the local time </CODE></P>
time and UTC as the computer has it right now. If you give some prefixes
then it will show UTC and UTC + the local offset (not including DST) at
the prefixes or callsigns that you specify.</P>
-<H2><A NAME="ss12.110">12.110</A> <A HREF="usermanual_en.html#toc12.110">show/usdb [call ..]</A>
+<H2><A NAME="ss12.112">12.112</A> <A HREF="usermanual_en.html#toc12.112">show/usdb [call ..]</A>
</H2>
<P><CODE><B>show/usdb [call ..]</B> Show information held on the FCC Call database</CODE></P>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss12.111">12.111</A> <A HREF="usermanual_en.html#toc12.111">show/vhfstats [days] [date]</A>
+<H2><A NAME="ss12.113">12.113</A> <A HREF="usermanual_en.html#toc12.113">show/vhfstats [days] [date]</A>
</H2>
<P><CODE><B>show/vhfstats [days] [date]</B> Show the VHF DX Statistics</CODE></P>
<P>Show the VHF DX spots breakdown by band for the last
<days> no of days (default is 31), starting from a date (default: today).</P>
-<H2><A NAME="ss12.112">12.112</A> <A HREF="usermanual_en.html#toc12.112">show/vhftable [days] [date] [prefix ...]</A>
+<H2><A NAME="ss12.114">12.114</A> <A HREF="usermanual_en.html#toc12.114">show/vhftable [days] [date] [prefix ...]</A>
</H2>
<P><CODE><B>show/vhftable [days] [date] [prefix ...]</B> Show the VHF DX Spotter Table</CODE></P>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss12.113">12.113</A> <A HREF="usermanual_en.html#toc12.113">show/wcy</A>
+<H2><A NAME="ss12.115">12.115</A> <A HREF="usermanual_en.html#toc12.115">show/wcy</A>
</H2>
<P><CODE><B>show/wcy</B> Show last 10 WCY broadcasts</CODE></P>
-<H2><A NAME="ss12.114">12.114</A> <A HREF="usermanual_en.html#toc12.114">show/wcy <n></A>
+<H2><A NAME="ss12.116">12.116</A> <A HREF="usermanual_en.html#toc12.116">show/wcy <n></A>
</H2>
<P><CODE><B>show/wcy <n></B> Show last <n> WCY broadcasts</CODE></P>
<P>Display the most recent WCY information that has been received by the system</P>
-<H2><A NAME="ss12.115">12.115</A> <A HREF="usermanual_en.html#toc12.115">show/wm7d <callsign></A>
+<H2><A NAME="ss12.117">12.117</A> <A HREF="usermanual_en.html#toc12.117">show/wm7d <callsign></A>
</H2>
<P><CODE><B>show/wm7d <callsign></B> Show callbook details on a US callsigns</CODE></P>
and returns any information available for that US callsign. This service
is provided for users of this software by http://www.wm7d.net.</P>
<P>See also SHOW/QRZ. </P>
-<H2><A NAME="ss12.116">12.116</A> <A HREF="usermanual_en.html#toc12.116">show/wwv</A>
+<H2><A NAME="ss12.118">12.118</A> <A HREF="usermanual_en.html#toc12.118">show/wwv</A>
</H2>
<P><CODE><B>show/wwv</B> Show last 10 WWV broadcasts</CODE></P>
-<H2><A NAME="ss12.117">12.117</A> <A HREF="usermanual_en.html#toc12.117">show/wwv <n></A>
+<H2><A NAME="ss12.119">12.119</A> <A HREF="usermanual_en.html#toc12.119">show/wwv <n></A>
</H2>
<P><CODE><B>show/wwv <n></B> Show last <n> WWV broadcasts</CODE></P>
<P>Display the most recent WWV information that has been received by the system</P>
-<H2><A NAME="ss12.118">12.118</A> <A HREF="usermanual_en.html#toc12.118">sysop</A>
+<H2><A NAME="ss12.120">12.120</A> <A HREF="usermanual_en.html#toc12.120">sysop</A>
</H2>
<P><CODE><B>sysop</B> Regain your privileges if you login remotely</CODE></P>
<P>They will all match. If there is no password you will still be offered
numbers but nothing will happen when you input a string. Any match is
case sensitive.</P>
-<H2><A NAME="ss12.119">12.119</A> <A HREF="usermanual_en.html#toc12.119">talk <call> > <node> [<text>]</A>
+<H2><A NAME="ss12.121">12.121</A> <A HREF="usermanual_en.html#toc12.121">talk <call> > <node> [<text>]</A>
</H2>
<P><CODE><B>talk <call> > <node> [<text>]</B> Send a text message to another station via a node</CODE></P>
</P>
<P>will send the hftable as you have it to all the people you are currently
talking to.</P>
-<H2><A NAME="ss12.120">12.120</A> <A HREF="usermanual_en.html#toc12.120">talk <call> [<text>]</A>
+<H2><A NAME="ss12.122">12.122</A> <A HREF="usermanual_en.html#toc12.122">talk <call> [<text>]</A>
</H2>
<P><CODE><B>talk <call> [<text>]</B> Send a text message to another station</CODE></P>
-<H2><A NAME="ss12.121">12.121</A> <A HREF="usermanual_en.html#toc12.121">type <filearea>/<name></A>
+<H2><A NAME="ss12.123">12.123</A> <A HREF="usermanual_en.html#toc12.123">type <filearea>/<name></A>
</H2>
<P><CODE><B>type <filearea>/<name></B> Look at the contents of a file in one of the fileareas</CODE></P>
</P>
<P>See also SHOW/FILES to see what fileareas are available and a
list of content.</P>
-<H2><A NAME="ss12.122">12.122</A> <A HREF="usermanual_en.html#toc12.122">unset/announce</A>
+<H2><A NAME="ss12.124">12.124</A> <A HREF="usermanual_en.html#toc12.124">unset/announce</A>
</H2>
<P><CODE><B>unset/announce</B> Stop announce messages coming out on your terminal</CODE></P>
-<H2><A NAME="ss12.123">12.123</A> <A HREF="usermanual_en.html#toc12.123">unset/anntalk</A>
+<H2><A NAME="ss12.125">12.125</A> <A HREF="usermanual_en.html#toc12.125">unset/anntalk</A>
</H2>
<P><CODE><B>unset/anntalk</B> Stop talk like announce messages on your terminal</CODE></P>
</CODE></BLOCKQUOTE>
</P>
<P>allows you to see them again. This is the default.</P>
-<H2><A NAME="ss12.124">12.124</A> <A HREF="usermanual_en.html#toc12.124">unset/beep</A>
+<H2><A NAME="ss12.126">12.126</A> <A HREF="usermanual_en.html#toc12.126">unset/beep</A>
</H2>
<P><CODE><B>unset/beep</B> Stop beeps for DX and other messages on your terminal</CODE></P>
-<H2><A NAME="ss12.125">12.125</A> <A HREF="usermanual_en.html#toc12.125">unset/dx</A>
+<H2><A NAME="ss12.127">12.127</A> <A HREF="usermanual_en.html#toc12.127">unset/dx</A>
</H2>
<P><CODE><B>unset/dx</B> Stop DX messages coming out on your terminal</CODE></P>
-<H2><A NAME="ss12.126">12.126</A> <A HREF="usermanual_en.html#toc12.126">unset/dxcq</A>
+<H2><A NAME="ss12.128">12.128</A> <A HREF="usermanual_en.html#toc12.128">unset/dxcq</A>
</H2>
<P><CODE><B>unset/dxcq</B> Stop CQ Zones on the end of DX announcements</CODE></P>
time, the Spotted's CQ is on the LHS.</P>
<P>Conflicts with: SET/DXGRID, SET/DXITU, SHOW/USSTATE</P>
<P>Do a STAT/USER to see which flags you have set if you are confused. </P>
-<H2><A NAME="ss12.127">12.127</A> <A HREF="usermanual_en.html#toc12.127">unset/dxgrid</A>
+<H2><A NAME="ss12.129">12.129</A> <A HREF="usermanual_en.html#toc12.129">unset/dxgrid</A>
</H2>
<P><CODE><B>unset/dxgrid</B> Stop QRA Grid Squares on the end of DX announcements</CODE></P>
this feature.</P>
<P>Conflicts with: SET/DXCQ, SET/DXITU</P>
<P>Do a STAT/USER to see which flags you have set if you are confused. </P>
-<H2><A NAME="ss12.128">12.128</A> <A HREF="usermanual_en.html#toc12.128">unset/dxitu</A>
+<H2><A NAME="ss12.130">12.130</A> <A HREF="usermanual_en.html#toc12.130">unset/dxitu</A>
</H2>
<P><CODE><B>unset/dxitu</B> Stop ITU Zones on the end of DX announcements</CODE></P>
time, the Spotted's ITU is on the LHS.</P>
<P>Conflicts with: SET/DXGRID, SET/DXCQ, SHOW/USSTATE</P>
<P>Do a STAT/USER to see which flags you have set if you are confused. </P>
-<H2><A NAME="ss12.129">12.129</A> <A HREF="usermanual_en.html#toc12.129">unset/echo</A>
+<H2><A NAME="ss12.131">12.131</A> <A HREF="usermanual_en.html#toc12.131">unset/echo</A>
</H2>
<P><CODE><B>unset/echo</B> Stop the cluster echoing your input</CODE></P>
to change the setting appropriately. </P>
<P>The setting is stored in your user profile.</P>
<P>YOU DO NOT NEED TO USE THIS COMMAND IF YOU ARE CONNECTED VIA AX25.</P>
-<H2><A NAME="ss12.130">12.130</A> <A HREF="usermanual_en.html#toc12.130">unset/email</A>
+<H2><A NAME="ss12.132">12.132</A> <A HREF="usermanual_en.html#toc12.132">unset/email</A>
</H2>
<P><CODE><B>unset/email</B> Stop personal msgs being forwarded by email</CODE></P>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss12.131">12.131</A> <A HREF="usermanual_en.html#toc12.131">unset/here</A>
+<H2><A NAME="ss12.133">12.133</A> <A HREF="usermanual_en.html#toc12.133">unset/here</A>
</H2>
<P><CODE><B>unset/here</B> Tell the system you are absent from your terminal</CODE></P>
-<H2><A NAME="ss12.132">12.132</A> <A HREF="usermanual_en.html#toc12.132">unset/logininfo</A>
+<H2><A NAME="ss12.134">12.134</A> <A HREF="usermanual_en.html#toc12.134">unset/logininfo</A>
</H2>
<P><CODE><B>unset/logininfo</B> Inform when a station logs out locally</CODE></P>
-<H2><A NAME="ss12.133">12.133</A> <A HREF="usermanual_en.html#toc12.133">unset/privilege</A>
+<H2><A NAME="ss12.135">12.135</A> <A HREF="usermanual_en.html#toc12.135">unset/privilege</A>
</H2>
<P><CODE><B>unset/privilege</B> Remove any privilege for this session</CODE></P>
use. If you want to get your normal privilege back you will need to
either logout and login again (if you are on a console) or use the
SYSOP command.</P>
-<H2><A NAME="ss12.134">12.134</A> <A HREF="usermanual_en.html#toc12.134">unset/prompt</A>
+<H2><A NAME="ss12.136">12.136</A> <A HREF="usermanual_en.html#toc12.136">unset/prompt</A>
</H2>
<P><CODE><B>unset/prompt</B> Set your prompt back to default</CODE></P>
</P>
<P>UNSET/PROMPT will undo the SET/PROMPT command and set you prompt back to
normal.</P>
-<H2><A NAME="ss12.135">12.135</A> <A HREF="usermanual_en.html#toc12.135">unset/talk</A>
+<H2><A NAME="ss12.137">12.137</A> <A HREF="usermanual_en.html#toc12.137">unset/talk</A>
</H2>
<P><CODE><B>unset/talk</B> Stop TALK messages coming out on your terminal</CODE></P>
-<H2><A NAME="ss12.136">12.136</A> <A HREF="usermanual_en.html#toc12.136">unset/usstate</A>
+<H2><A NAME="ss12.138">12.138</A> <A HREF="usermanual_en.html#toc12.138">unset/usstate</A>
</H2>
<P><CODE><B>unset/usstate</B> Stop US State info on the end of DX announcements</CODE></P>
to reset (or set) this feature.</P>
<P>Conflicts with: SET/DXCQ, SET/DXITU</P>
<P>Do a STAT/USER to see which flags you have set if you are confused. </P>
-<H2><A NAME="ss12.137">12.137</A> <A HREF="usermanual_en.html#toc12.137">unset/wcy</A>
+<H2><A NAME="ss12.139">12.139</A> <A HREF="usermanual_en.html#toc12.139">unset/wcy</A>
</H2>
<P><CODE><B>unset/wcy</B> Stop WCY messages coming out on your terminal</CODE></P>
-<H2><A NAME="ss12.138">12.138</A> <A HREF="usermanual_en.html#toc12.138">unset/wwv</A>
+<H2><A NAME="ss12.140">12.140</A> <A HREF="usermanual_en.html#toc12.140">unset/wwv</A>
</H2>
<P><CODE><B>unset/wwv</B> Stop WWV messages coming out on your terminal</CODE></P>
-<H2><A NAME="ss12.139">12.139</A> <A HREF="usermanual_en.html#toc12.139">unset/wx</A>
+<H2><A NAME="ss12.141">12.141</A> <A HREF="usermanual_en.html#toc12.141">unset/wx</A>
</H2>
<P><CODE><B>unset/wx</B> Stop WX messages coming out on your terminal</CODE></P>
-<H2><A NAME="ss12.140">12.140</A> <A HREF="usermanual_en.html#toc12.140">who</A>
+<H2><A NAME="ss12.142">12.142</A> <A HREF="usermanual_en.html#toc12.142">who</A>
</H2>
<P><CODE><B>who</B> Show who is physically connected</CODE></P>
<P>This is a quick listing that shows which callsigns are connected and
what sort of connection they have</P>
-<H2><A NAME="ss12.141">12.141</A> <A HREF="usermanual_en.html#toc12.141">wx <text></A>
+<H2><A NAME="ss12.143">12.143</A> <A HREF="usermanual_en.html#toc12.143">wx <text></A>
</H2>
<P><CODE><B>wx <text></B> Send a weather message to local users</CODE></P>
-<H2><A NAME="ss12.142">12.142</A> <A HREF="usermanual_en.html#toc12.142">wx full <text></A>
+<H2><A NAME="ss12.144">12.144</A> <A HREF="usermanual_en.html#toc12.144">wx full <text></A>
</H2>
<P><CODE><B>wx full <text></B> Send a weather message to all cluster users</CODE></P>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider User Manual v1.50: Logins and logouts.</TITLE>
<LINK HREF="usermanual_en-3.html" REL=next>
<LINK HREF="usermanual_en-1.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider User Manual v1.50: Setting your personal details.</TITLE>
<LINK HREF="usermanual_en-4.html" REL=next>
<LINK HREF="usermanual_en-2.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider User Manual v1.50: Getting and posting DX.</TITLE>
<LINK HREF="usermanual_en-5.html" REL=next>
<LINK HREF="usermanual_en-3.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider User Manual v1.50: Headings and propagation</TITLE>
<LINK HREF="usermanual_en-6.html" REL=next>
<LINK HREF="usermanual_en-4.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider User Manual v1.50: Announcements.</TITLE>
<LINK HREF="usermanual_en-7.html" REL=next>
<LINK HREF="usermanual_en-5.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider User Manual v1.50: Nodes and users.</TITLE>
<LINK HREF="usermanual_en-8.html" REL=next>
<LINK HREF="usermanual_en-6.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider User Manual v1.50: Talk mode.</TITLE>
<LINK HREF="usermanual_en-9.html" REL=next>
<LINK HREF="usermanual_en-7.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider User Manual v1.50: Mail.</TITLE>
<LINK HREF="usermanual_en-10.html" REL=next>
<LINK HREF="usermanual_en-8.html" REL=previous>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<HTML>
<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.21">
+ <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.20">
<TITLE>The DXSpider User Manual v1.50</TITLE>
<LINK HREF="usermanual_en-1.html" REL=next>
<LI><A NAME="toc12.90">12.90</A> <A HREF="usermanual_en-12.html#ss12.90">show/dxcc <prefix></A>
<LI><A NAME="toc12.91">12.91</A> <A HREF="usermanual_en-12.html#ss12.91">show/dxqsl <callsign></A>
<LI><A NAME="toc12.92">12.92</A> <A HREF="usermanual_en-12.html#ss12.92">show/dxstats [days] [date]</A>
-<LI><A NAME="toc12.93">12.93</A> <A HREF="usermanual_en-12.html#ss12.93">show/files [<filearea> [<string>]]</A>
-<LI><A NAME="toc12.94">12.94</A> <A HREF="usermanual_en-12.html#ss12.94">show/filter</A>
-<LI><A NAME="toc12.95">12.95</A> <A HREF="usermanual_en-12.html#ss12.95">show/hfstats [days] [date]</A>
-<LI><A NAME="toc12.96">12.96</A> <A HREF="usermanual_en-12.html#ss12.96">show/hftable [days] [date] [prefix ...]</A>
-<LI><A NAME="toc12.97">12.97</A> <A HREF="usermanual_en-12.html#ss12.97">show/moon [ndays] [<prefix>|<callsign>]</A>
-<LI><A NAME="toc12.98">12.98</A> <A HREF="usermanual_en-12.html#ss12.98">show/muf <prefix> [<hours>][long]</A>
-<LI><A NAME="toc12.99">12.99</A> <A HREF="usermanual_en-12.html#ss12.99">show/newconfiguration [<node>]</A>
-<LI><A NAME="toc12.100">12.100</A> <A HREF="usermanual_en-12.html#ss12.100">show/newconfiguration/node</A>
-<LI><A NAME="toc12.101">12.101</A> <A HREF="usermanual_en-12.html#ss12.101">show/prefix <callsign></A>
-<LI><A NAME="toc12.102">12.102</A> <A HREF="usermanual_en-12.html#ss12.102">show/qra <lat> <long></A>
-<LI><A NAME="toc12.103">12.103</A> <A HREF="usermanual_en-12.html#ss12.103">show/qra <locator> [<locator>]</A>
-<LI><A NAME="toc12.104">12.104</A> <A HREF="usermanual_en-12.html#ss12.104">show/qrz <callsign></A>
-<LI><A NAME="toc12.105">12.105</A> <A HREF="usermanual_en-12.html#ss12.105">show/route <callsign> ...</A>
-<LI><A NAME="toc12.106">12.106</A> <A HREF="usermanual_en-12.html#ss12.106">show/satellite <name> [<hours> <interval>]</A>
-<LI><A NAME="toc12.107">12.107</A> <A HREF="usermanual_en-12.html#ss12.107">show/station [<callsign> ..]</A>
-<LI><A NAME="toc12.108">12.108</A> <A HREF="usermanual_en-12.html#ss12.108">show/sun [ndays] [<prefix>|<callsign>]</A>
-<LI><A NAME="toc12.109">12.109</A> <A HREF="usermanual_en-12.html#ss12.109">show/time [<prefix>|<callsign>]</A>
-<LI><A NAME="toc12.110">12.110</A> <A HREF="usermanual_en-12.html#ss12.110">show/usdb [call ..]</A>
-<LI><A NAME="toc12.111">12.111</A> <A HREF="usermanual_en-12.html#ss12.111">show/vhfstats [days] [date]</A>
-<LI><A NAME="toc12.112">12.112</A> <A HREF="usermanual_en-12.html#ss12.112">show/vhftable [days] [date] [prefix ...]</A>
-<LI><A NAME="toc12.113">12.113</A> <A HREF="usermanual_en-12.html#ss12.113">show/wcy</A>
-<LI><A NAME="toc12.114">12.114</A> <A HREF="usermanual_en-12.html#ss12.114">show/wcy <n></A>
-<LI><A NAME="toc12.115">12.115</A> <A HREF="usermanual_en-12.html#ss12.115">show/wm7d <callsign></A>
-<LI><A NAME="toc12.116">12.116</A> <A HREF="usermanual_en-12.html#ss12.116">show/wwv</A>
-<LI><A NAME="toc12.117">12.117</A> <A HREF="usermanual_en-12.html#ss12.117">show/wwv <n></A>
-<LI><A NAME="toc12.118">12.118</A> <A HREF="usermanual_en-12.html#ss12.118">sysop</A>
-<LI><A NAME="toc12.119">12.119</A> <A HREF="usermanual_en-12.html#ss12.119">talk <call> > <node> [<text>]</A>
-<LI><A NAME="toc12.120">12.120</A> <A HREF="usermanual_en-12.html#ss12.120">talk <call> [<text>]</A>
-<LI><A NAME="toc12.121">12.121</A> <A HREF="usermanual_en-12.html#ss12.121">type <filearea>/<name></A>
-<LI><A NAME="toc12.122">12.122</A> <A HREF="usermanual_en-12.html#ss12.122">unset/announce</A>
-<LI><A NAME="toc12.123">12.123</A> <A HREF="usermanual_en-12.html#ss12.123">unset/anntalk</A>
-<LI><A NAME="toc12.124">12.124</A> <A HREF="usermanual_en-12.html#ss12.124">unset/beep</A>
-<LI><A NAME="toc12.125">12.125</A> <A HREF="usermanual_en-12.html#ss12.125">unset/dx</A>
-<LI><A NAME="toc12.126">12.126</A> <A HREF="usermanual_en-12.html#ss12.126">unset/dxcq</A>
-<LI><A NAME="toc12.127">12.127</A> <A HREF="usermanual_en-12.html#ss12.127">unset/dxgrid</A>
-<LI><A NAME="toc12.128">12.128</A> <A HREF="usermanual_en-12.html#ss12.128">unset/dxitu</A>
-<LI><A NAME="toc12.129">12.129</A> <A HREF="usermanual_en-12.html#ss12.129">unset/echo</A>
-<LI><A NAME="toc12.130">12.130</A> <A HREF="usermanual_en-12.html#ss12.130">unset/email</A>
-<LI><A NAME="toc12.131">12.131</A> <A HREF="usermanual_en-12.html#ss12.131">unset/here</A>
-<LI><A NAME="toc12.132">12.132</A> <A HREF="usermanual_en-12.html#ss12.132">unset/logininfo</A>
-<LI><A NAME="toc12.133">12.133</A> <A HREF="usermanual_en-12.html#ss12.133">unset/privilege</A>
-<LI><A NAME="toc12.134">12.134</A> <A HREF="usermanual_en-12.html#ss12.134">unset/prompt</A>
-<LI><A NAME="toc12.135">12.135</A> <A HREF="usermanual_en-12.html#ss12.135">unset/talk</A>
-<LI><A NAME="toc12.136">12.136</A> <A HREF="usermanual_en-12.html#ss12.136">unset/usstate</A>
-<LI><A NAME="toc12.137">12.137</A> <A HREF="usermanual_en-12.html#ss12.137">unset/wcy</A>
-<LI><A NAME="toc12.138">12.138</A> <A HREF="usermanual_en-12.html#ss12.138">unset/wwv</A>
-<LI><A NAME="toc12.139">12.139</A> <A HREF="usermanual_en-12.html#ss12.139">unset/wx</A>
-<LI><A NAME="toc12.140">12.140</A> <A HREF="usermanual_en-12.html#ss12.140">who</A>
-<LI><A NAME="toc12.141">12.141</A> <A HREF="usermanual_en-12.html#ss12.141">wx <text></A>
-<LI><A NAME="toc12.142">12.142</A> <A HREF="usermanual_en-12.html#ss12.142">wx full <text></A>
+<LI><A NAME="toc12.93">12.93</A> <A HREF="usermanual_en-12.html#ss12.93">show/fdx</A>
+<LI><A NAME="toc12.94">12.94</A> <A HREF="usermanual_en-12.html#ss12.94">show/files [<filearea> [<string>]]</A>
+<LI><A NAME="toc12.95">12.95</A> <A HREF="usermanual_en-12.html#ss12.95">show/filter</A>
+<LI><A NAME="toc12.96">12.96</A> <A HREF="usermanual_en-12.html#ss12.96">show/hfstats [days] [date]</A>
+<LI><A NAME="toc12.97">12.97</A> <A HREF="usermanual_en-12.html#ss12.97">show/hftable [days] [date] [prefix ...]</A>
+<LI><A NAME="toc12.98">12.98</A> <A HREF="usermanual_en-12.html#ss12.98">show/moon [ndays] [<prefix>|<callsign>]</A>
+<LI><A NAME="toc12.99">12.99</A> <A HREF="usermanual_en-12.html#ss12.99">show/muf <prefix> [<hours>][long]</A>
+<LI><A NAME="toc12.100">12.100</A> <A HREF="usermanual_en-12.html#ss12.100">show/mydx</A>
+<LI><A NAME="toc12.101">12.101</A> <A HREF="usermanual_en-12.html#ss12.101">show/newconfiguration [<node>]</A>
+<LI><A NAME="toc12.102">12.102</A> <A HREF="usermanual_en-12.html#ss12.102">show/newconfiguration/node</A>
+<LI><A NAME="toc12.103">12.103</A> <A HREF="usermanual_en-12.html#ss12.103">show/prefix <callsign></A>
+<LI><A NAME="toc12.104">12.104</A> <A HREF="usermanual_en-12.html#ss12.104">show/qra <lat> <long></A>
+<LI><A NAME="toc12.105">12.105</A> <A HREF="usermanual_en-12.html#ss12.105">show/qra <locator> [<locator>]</A>
+<LI><A NAME="toc12.106">12.106</A> <A HREF="usermanual_en-12.html#ss12.106">show/qrz <callsign></A>
+<LI><A NAME="toc12.107">12.107</A> <A HREF="usermanual_en-12.html#ss12.107">show/route <callsign> ...</A>
+<LI><A NAME="toc12.108">12.108</A> <A HREF="usermanual_en-12.html#ss12.108">show/satellite <name> [<hours> <interval>]</A>
+<LI><A NAME="toc12.109">12.109</A> <A HREF="usermanual_en-12.html#ss12.109">show/station [<callsign> ..]</A>
+<LI><A NAME="toc12.110">12.110</A> <A HREF="usermanual_en-12.html#ss12.110">show/sun [ndays] [<prefix>|<callsign>]</A>
+<LI><A NAME="toc12.111">12.111</A> <A HREF="usermanual_en-12.html#ss12.111">show/time [<prefix>|<callsign>]</A>
+<LI><A NAME="toc12.112">12.112</A> <A HREF="usermanual_en-12.html#ss12.112">show/usdb [call ..]</A>
+<LI><A NAME="toc12.113">12.113</A> <A HREF="usermanual_en-12.html#ss12.113">show/vhfstats [days] [date]</A>
+<LI><A NAME="toc12.114">12.114</A> <A HREF="usermanual_en-12.html#ss12.114">show/vhftable [days] [date] [prefix ...]</A>
+<LI><A NAME="toc12.115">12.115</A> <A HREF="usermanual_en-12.html#ss12.115">show/wcy</A>
+<LI><A NAME="toc12.116">12.116</A> <A HREF="usermanual_en-12.html#ss12.116">show/wcy <n></A>
+<LI><A NAME="toc12.117">12.117</A> <A HREF="usermanual_en-12.html#ss12.117">show/wm7d <callsign></A>
+<LI><A NAME="toc12.118">12.118</A> <A HREF="usermanual_en-12.html#ss12.118">show/wwv</A>
+<LI><A NAME="toc12.119">12.119</A> <A HREF="usermanual_en-12.html#ss12.119">show/wwv <n></A>
+<LI><A NAME="toc12.120">12.120</A> <A HREF="usermanual_en-12.html#ss12.120">sysop</A>
+<LI><A NAME="toc12.121">12.121</A> <A HREF="usermanual_en-12.html#ss12.121">talk <call> > <node> [<text>]</A>
+<LI><A NAME="toc12.122">12.122</A> <A HREF="usermanual_en-12.html#ss12.122">talk <call> [<text>]</A>
+<LI><A NAME="toc12.123">12.123</A> <A HREF="usermanual_en-12.html#ss12.123">type <filearea>/<name></A>
+<LI><A NAME="toc12.124">12.124</A> <A HREF="usermanual_en-12.html#ss12.124">unset/announce</A>
+<LI><A NAME="toc12.125">12.125</A> <A HREF="usermanual_en-12.html#ss12.125">unset/anntalk</A>
+<LI><A NAME="toc12.126">12.126</A> <A HREF="usermanual_en-12.html#ss12.126">unset/beep</A>
+<LI><A NAME="toc12.127">12.127</A> <A HREF="usermanual_en-12.html#ss12.127">unset/dx</A>
+<LI><A NAME="toc12.128">12.128</A> <A HREF="usermanual_en-12.html#ss12.128">unset/dxcq</A>
+<LI><A NAME="toc12.129">12.129</A> <A HREF="usermanual_en-12.html#ss12.129">unset/dxgrid</A>
+<LI><A NAME="toc12.130">12.130</A> <A HREF="usermanual_en-12.html#ss12.130">unset/dxitu</A>
+<LI><A NAME="toc12.131">12.131</A> <A HREF="usermanual_en-12.html#ss12.131">unset/echo</A>
+<LI><A NAME="toc12.132">12.132</A> <A HREF="usermanual_en-12.html#ss12.132">unset/email</A>
+<LI><A NAME="toc12.133">12.133</A> <A HREF="usermanual_en-12.html#ss12.133">unset/here</A>
+<LI><A NAME="toc12.134">12.134</A> <A HREF="usermanual_en-12.html#ss12.134">unset/logininfo</A>
+<LI><A NAME="toc12.135">12.135</A> <A HREF="usermanual_en-12.html#ss12.135">unset/privilege</A>
+<LI><A NAME="toc12.136">12.136</A> <A HREF="usermanual_en-12.html#ss12.136">unset/prompt</A>
+<LI><A NAME="toc12.137">12.137</A> <A HREF="usermanual_en-12.html#ss12.137">unset/talk</A>
+<LI><A NAME="toc12.138">12.138</A> <A HREF="usermanual_en-12.html#ss12.138">unset/usstate</A>
+<LI><A NAME="toc12.139">12.139</A> <A HREF="usermanual_en-12.html#ss12.139">unset/wcy</A>
+<LI><A NAME="toc12.140">12.140</A> <A HREF="usermanual_en-12.html#ss12.140">unset/wwv</A>
+<LI><A NAME="toc12.141">12.141</A> <A HREF="usermanual_en-12.html#ss12.141">unset/wx</A>
+<LI><A NAME="toc12.142">12.142</A> <A HREF="usermanual_en-12.html#ss12.142">who</A>
+<LI><A NAME="toc12.143">12.143</A> <A HREF="usermanual_en-12.html#ss12.143">wx <text></A>
+<LI><A NAME="toc12.144">12.144</A> <A HREF="usermanual_en-12.html#ss12.144">wx full <text></A>
</UL>
<HR>
<A HREF="usermanual_en-1.html">Next</A>
You can also use this with the 'by' keyword so
eg by W dxcc
</verb></tscreen>
-
+
+<tscreen><verb>
+ real or rt - Format the output the same as for real time spots. The
+ formats are deliberately different (so you can tell
+ one sort from the other). This is useful for some
+ logging programs that can't cope with normal sh/dx
+ output. An alias of SHOW/FDX is available.
+</verb></tscreen>
+
+<tscreen><verb>
+ filter - Filter the spots, before output, with the user's
+ spot filter. An alias of SHOW/MYDX is available.
+</verb></tscreen>
+
+<tscreen><verb>
+ zone <zones> - look for spots in the cq zone (or zones) specified.
+ zones are numbers separated by commas.
+</verb></tscreen>
+
+<tscreen><verb>
+ by_zone <zones> - look for spots spotted by people in the cq zone
+ specified.
+</verb></tscreen>
+
+<tscreen><verb>
+ itu <itus> - look for spots in the itu zone (or zones) specified
+ itu zones are numbers separated by commas.
+</verb></tscreen>
+
+<tscreen><verb>
+ by_itu <itus> - look for spots spotted by people in the itu zone
+ specified.
+</verb></tscreen>
+
+<tscreen><verb>
+ state <list> - look for spots in the US state (or states) specified
+ The list is two letter state codes separated by commas.
+</verb></tscreen>
+
+<tscreen><verb>
+ by_state <list> - look for spots spotted by people in the US state
+ specified.
+</verb></tscreen>
+
<tscreen><verb>
e.g.
</verb></tscreen>
SH/DX qra jn86
SH/DX dxcc oq2
SH/DX dxcc oq2 by w dxcc
+ SH/DX zone 4,5,6
+ SH/DX by_zone 4,5,6
+ SH/DX state in,oh
+ SH/DX by_state in,oh
</verb></tscreen>
<sect1>show/dxcc <prefix> (0)
SH/DX dxcc w on 20m iota
</verb></tscreen>
+This is an alias for: SH/DX dxcc
<sect1>show/dxqsl <callsign> (0)
<P>
<P>
Show the total DX spots for the last <days> no of days (default is 31),
starting from a <date> (default: today).
+<sect1>show/fdx (0)
+
+<P>
+<tt>
+<bf>show/fdx</bf> Show the DX data in realtime format.
+</tt>
+
+<P>
+Normally SHOW/DX outputs spot data in a different format to the
+realtime data. This is a deliberate policy (so you can tell the
+difference between the two). Some logging programs cannot handle
+this so SHOW/FDX outputs historical data in real time format.
+
+This is an alias for: SHOW/DX real
<sect1>show/files [<filearea> [<string>]] (0)
<P>
Gives you an estimate of the long path propagation characterics. It
should be noted that the figures will probably not be very useful, nor
terrible accurate, but it is included for completeness.
+<sect1>show/mydx (0)
+
+<P>
+<tt>
+<bf>show/mydx</bf> Show the DX data filtered with your spot filter.
+</tt>
+
+<P>
+SHOW/DX potentially shows all the spots available in the system. Using
+SHOW/MYDX will, instead, filter the availble spots using any spot filter
+that you have set, first.
+
+This command, together with ACCEPT/SPOT or REJECT/SPOT, will allow
+you to customise the spots that you receive.
+
+So if you have said: ACC/SPOT on hf
+
+Doing a SHOW/MYDX will now only, ever, show HF spots. All the other
+options on SH/DX can still be used.
<sect1>show/newconfiguration [<node>] (0)
<P>
You can also use this with the 'by' keyword so
eg by W dxcc
</verb></tscreen>
-
+
+<tscreen><verb>
+ real or rt - Format the output the same as for real time spots. The
+ formats are deliberately different (so you can tell
+ one sort from the other). This is useful for some
+ logging programs that can't cope with normal sh/dx
+ output. An alias of SHOW/FDX is available.
+</verb></tscreen>
+
+<tscreen><verb>
+ filter - Filter the spots, before output, with the user's
+ spot filter. An alias of SHOW/MYDX is available.
+</verb></tscreen>
+
+<tscreen><verb>
+ zone <zones> - look for spots in the cq zone (or zones) specified.
+ zones are numbers separated by commas.
+</verb></tscreen>
+
+<tscreen><verb>
+ by_zone <zones> - look for spots spotted by people in the cq zone
+ specified.
+</verb></tscreen>
+
+<tscreen><verb>
+ itu <itus> - look for spots in the itu zone (or zones) specified
+ itu zones are numbers separated by commas.
+</verb></tscreen>
+
+<tscreen><verb>
+ by_itu <itus> - look for spots spotted by people in the itu zone
+ specified.
+</verb></tscreen>
+
+<tscreen><verb>
+ state <list> - look for spots in the US state (or states) specified
+ The list is two letter state codes separated by commas.
+</verb></tscreen>
+
+<tscreen><verb>
+ by_state <list> - look for spots spotted by people in the US state
+ specified.
+</verb></tscreen>
+
<tscreen><verb>
e.g.
</verb></tscreen>
SH/DX qra jn86
SH/DX dxcc oq2
SH/DX dxcc oq2 by w dxcc
+ SH/DX zone 4,5,6
+ SH/DX by_zone 4,5,6
+ SH/DX state in,oh
+ SH/DX by_state in,oh
</verb></tscreen>
<sect1>show/dxcc <prefix>
SH/DX dxcc w on 20m iota
</verb></tscreen>
+This is an alias for: SH/DX dxcc
<sect1>show/dxqsl <callsign>
<P>
<P>
Show the total DX spots for the last <days> no of days (default is 31),
starting from a <date> (default: today).
+<sect1>show/fdx
+
+<P>
+<tt>
+<bf>show/fdx</bf> Show the DX data in realtime format.
+</tt>
+
+<P>
+Normally SHOW/DX outputs spot data in a different format to the
+realtime data. This is a deliberate policy (so you can tell the
+difference between the two). Some logging programs cannot handle
+this so SHOW/FDX outputs historical data in real time format.
+
+This is an alias for: SHOW/DX real
<sect1>show/files [<filearea> [<string>]]
<P>
Gives you an estimate of the long path propagation characterics. It
should be noted that the figures will probably not be very useful, nor
terrible accurate, but it is included for completeness.
+<sect1>show/mydx
+
+<P>
+<tt>
+<bf>show/mydx</bf> Show the DX data filtered with your spot filter.
+</tt>
+
+<P>
+SHOW/DX potentially shows all the spots available in the system. Using
+SHOW/MYDX will, instead, filter the availble spots using any spot filter
+that you have set, first.
+
+This command, together with ACCEPT/SPOT or REJECT/SPOT, will allow
+you to customise the spots that you receive.
+
+So if you have said: ACC/SPOT on hf
+
+Doing a SHOW/MYDX will now only, ever, show HF spots. All the other
+options on SH/DX can still be used.
<sect1>show/newconfiguration [<node>]
<P>
11.177 show/dxcc <prefix> (0)
11.178 show/dxqsl <callsign> (0)
11.179 show/dxstats [days] [date] (0)
- 11.180 show/files [<filearea> [<string>]] (0)
- 11.181 show/filter (0)
- 11.182 show/hfstats [days] [date] (0)
- 11.183 show/hftable [days] [date] [prefix ...] (0)
- 11.184 show/hops <call> [ann|spots|route|wcy|wwv] (8)
- 11.185 show/isolate (1)
- 11.186 show/lockout <prefix>|all (9)
- 11.187 show/log [<callsign>] (8)
- 11.188 show/moon [ndays] [<prefix>|<callsign>] (0)
- 11.189 show/muf <prefix> [<hours>][long] (0)
- 11.190 show/newconfiguration [<node>] (0)
- 11.191 show/newconfiguration/node (0)
- 11.192 show/node [<callsign> ...] (1)
- 11.193 show/prefix <callsign> (0)
- 11.194 show/program (5)
- 11.195 show/qra <lat> <long> (0)
- 11.196 show/qra <locator> [<locator>] (0)
- 11.197 show/qrz <callsign> (0)
- 11.198 show/registered [<prefix>] (9)
- 11.199 show/route <callsign> ... (0)
- 11.200 show/satellite <name> [<hours> <interval>] (0)
- 11.201 show/station all [<regex>] (6)
- 11.202 show/station [<callsign> ..] (0)
- 11.203 show/sun [ndays] [<prefix>|<callsign>] (0)
- 11.204 show/time [<prefix>|<callsign>] (0)
- 11.205 show/usdb [call ..] (0)
- 11.206 show/vhfstats [days] [date] (0)
- 11.207 show/vhftable [days] [date] [prefix ...] (0)
- 11.208 show/wcy (0)
- 11.209 show/wcy <n> (0)
- 11.210 show/wm7d <callsign> (0)
- 11.211 show/wwv (0)
- 11.212 show/wwv <n> (0)
- 11.213 shutdown (5)
- 11.214 spoof <call> <command> (9)
- 11.215 stat/channel [<callsign>] (5)
- 11.216 stat/db <dbname> (5)
- 11.217 stat/msg (1)
- 11.218 stat/msg <msgno> (1)
- 11.219 stat/route_node <callsign> (5)
- 11.220 stat/route_node all (5)
- 11.221 stat/route_user <callsign> (5)
- 11.222 stat/route_user all (5)
- 11.223 stat/user [<callsign>] (5)
- 11.224 sysop (0)
- 11.225 talk <call> > <node> [<text>] (0)
- 11.226 talk <call> [<text>] (0)
- 11.227 type <filearea>/<name> (0)
- 11.228 uncatchup <node call> all|[msgno> ...] (5)
- 11.229 unset/announce (0)
- 11.230 unset/anntalk (0)
- 11.231 unset/baddx <call>.. (8)
- 11.232 unset/badnode <call>.. (8)
- 11.233 unset/badspotter <call>.. (8)
- 11.234 unset/badword <word>.. (8)
- 11.235 unset/beep (0)
- 11.236 unset/debug <name> (9)
- 11.237 unset/dx (0)
- 11.238 unset/dxcq (0)
- 11.239 unset/dxgrid (0)
- 11.240 unset/dxitu (0)
- 11.241 unset/echo (0)
- 11.242 unset/email (0)
- 11.243 unset/here (0)
- 11.244 unset/hops <call> ann|spots|route|wwv|wcy (8)
- 11.245 unset/isolate (9)
- 11.246 unset/lockout <call> (9)
- 11.247 unset/logininfo (0)
- 11.248 unset/password <call> ... (9)
- 11.249 unset/privilege (0)
- 11.250 unset/prompt (0)
- 11.251 unset/register <call> ... (9)
- 11.252 unset/talk (0)
- 11.253 unset/usstate (0)
- 11.254 unset/wcy (0)
- 11.255 unset/wwv (0)
- 11.256 unset/wx (0)
- 11.257 who (0)
- 11.258 wx <text> (0)
- 11.259 wx full <text> (0)
- 11.260 wx sysop <text> (5)
+ 11.180 show/fdx (0)
+ 11.181 show/files [<filearea> [<string>]] (0)
+ 11.182 show/filter (0)
+ 11.183 show/hfstats [days] [date] (0)
+ 11.184 show/hftable [days] [date] [prefix ...] (0)
+ 11.185 show/hops <call> [ann|spots|route|wcy|wwv] (8)
+ 11.186 show/isolate (1)
+ 11.187 show/lockout <prefix>|all (9)
+ 11.188 show/log [<callsign>] (8)
+ 11.189 show/moon [ndays] [<prefix>|<callsign>] (0)
+ 11.190 show/muf <prefix> [<hours>][long] (0)
+ 11.191 show/mydx (0)
+ 11.192 show/newconfiguration [<node>] (0)
+ 11.193 show/newconfiguration/node (0)
+ 11.194 show/node [<callsign> ...] (1)
+ 11.195 show/prefix <callsign> (0)
+ 11.196 show/program (5)
+ 11.197 show/qra <lat> <long> (0)
+ 11.198 show/qra <locator> [<locator>] (0)
+ 11.199 show/qrz <callsign> (0)
+ 11.200 show/registered [<prefix>] (9)
+ 11.201 show/route <callsign> ... (0)
+ 11.202 show/satellite <name> [<hours> <interval>] (0)
+ 11.203 show/station all [<regex>] (6)
+ 11.204 show/station [<callsign> ..] (0)
+ 11.205 show/sun [ndays] [<prefix>|<callsign>] (0)
+ 11.206 show/time [<prefix>|<callsign>] (0)
+ 11.207 show/usdb [call ..] (0)
+ 11.208 show/vhfstats [days] [date] (0)
+ 11.209 show/vhftable [days] [date] [prefix ...] (0)
+ 11.210 show/wcy (0)
+ 11.211 show/wcy <n> (0)
+ 11.212 show/wm7d <callsign> (0)
+ 11.213 show/wwv (0)
+ 11.214 show/wwv <n> (0)
+ 11.215 shutdown (5)
+ 11.216 spoof <call> <command> (9)
+ 11.217 stat/channel [<callsign>] (5)
+ 11.218 stat/db <dbname> (5)
+ 11.219 stat/msg (1)
+ 11.220 stat/msg <msgno> (1)
+ 11.221 stat/route_node <callsign> (5)
+ 11.222 stat/route_node all (5)
+ 11.223 stat/route_user <callsign> (5)
+ 11.224 stat/route_user all (5)
+ 11.225 stat/user [<callsign>] (5)
+ 11.226 sysop (0)
+ 11.227 talk <call> > <node> [<text>] (0)
+ 11.228 talk <call> [<text>] (0)
+ 11.229 type <filearea>/<name> (0)
+ 11.230 uncatchup <node call> all|[msgno> ...] (5)
+ 11.231 unset/announce (0)
+ 11.232 unset/anntalk (0)
+ 11.233 unset/baddx <call>.. (8)
+ 11.234 unset/badnode <call>.. (8)
+ 11.235 unset/badspotter <call>.. (8)
+ 11.236 unset/badword <word>.. (8)
+ 11.237 unset/beep (0)
+ 11.238 unset/debug <name> (9)
+ 11.239 unset/dx (0)
+ 11.240 unset/dxcq (0)
+ 11.241 unset/dxgrid (0)
+ 11.242 unset/dxitu (0)
+ 11.243 unset/echo (0)
+ 11.244 unset/email (0)
+ 11.245 unset/here (0)
+ 11.246 unset/hops <call> ann|spots|route|wwv|wcy (8)
+ 11.247 unset/isolate (9)
+ 11.248 unset/lockout <call> (9)
+ 11.249 unset/logininfo (0)
+ 11.250 unset/password <call> ... (9)
+ 11.251 unset/privilege (0)
+ 11.252 unset/prompt (0)
+ 11.253 unset/register <call> ... (9)
+ 11.254 unset/talk (0)
+ 11.255 unset/usstate (0)
+ 11.256 unset/wcy (0)
+ 11.257 unset/wwv (0)
+ 11.258 unset/wx (0)
+ 11.259 who (0)
+ 11.260 wx <text> (0)
+ 11.261 wx full <text> (0)
+ 11.262 wx sysop <text> (5)
______________________________________________________________________
\e[1m1. Routing and Filtering\e[0m
+
+
\e[1m1.1. Introduction\e[0m
From DXSpider version 1.48, major changes were introduced to the way
filtering.
-
I should at this stage give a little bit of background on filters.
All the filters in Spider work in basically the same way. You can
either accept or reject various options in order to create the filter
- acc/route node_default call_dxcc 61,38
- acc/route node_default call gb7djk
+ acc/route node_default call_dxcc 61,38
+ acc/route node_default call gb7djk
+
+
GB7DJK uses the first of these. The DXCC countries can be obtained
from the \e[4mshow/prefix\e[24m command.
- reject/route <node_call> <filter_option>
+ reject/route <node_call> <filter_option>
- or
+ or
- accept/route <node_call> <filter_option>
+ accept/route <node_call> <filter_option>
will be renamed as you update.
+
There are 3 basic commands involved in setting and manipulating
filters. These are \e[4maccept\e[24m, \e[4mreject\e[24m and \e[4mclear\e[24m. First we will look
generally at filtering. There are a number of things you can filter in
- accept/spots .....
- reject/spots .....
+ accept/spots .....
+ reject/spots .....
then you will \e[4mONLY\e[24m get VHF spots \e[4mfrom\e[24m or \e[4mto\e[24m CQ zones 14, 15 and 16.
+
If you set a reject filter like this ...
on VHF which don't either originate or spot someone in Europe.
+
This is an example where you would use a line number (1 and 2 in this
case), if you leave the digit out, the system assumes '1'. Digits
'0'-'9' are available. This make it easier to see just what filters
originated there). If you did not have the brackets to separate the 2
sections, then Spider would read it logically from the front and see a
different expression entirely ...
+
+
+
(on 50000/1400000 and by_zone 14,15,16) or call_zone 14,15,16
the various helpfiles for accept, reject and filter.
+
\e[1m1.8. Default filters\e[0m
Sometimes all that is needed is a general rule for node connects.
- #
- # hop table construction
- #
+ #
+ # hop table construction
+ #
- package DXProt;
+ package DXProt;
- # default hopcount to use
- $def_hopcount = 5;
+ # default hopcount to use
+ $def_hopcount = 5;
- # some variable hop counts based on message type
- %hopcount =
- (
- 11 => 10,
- 16 => 10,
- 17 => 10,
- 19 => 10,
- 21 => 10,
- );
+ # some variable hop counts based on message type
+ %hopcount =
+ (
+ 11 => 10,
+ 16 => 10,
+ 17 => 10,
+ 19 => 10,
+ 21 => 10,
+ );
- # the per node hop control thingy
-
-
- %nodehops =
- (
- GB7ADX => { 11 => 8,
- 12 => 8,
- 16 => 8,
- 17 => 8,
- 19 => 8,
- 21 => 8,
- },
-
- GB7UDX => { 11 => 8,
- 12 => 8,
- 16 => 8,
- 17 => 8,
- 19 => 8,
- 21 => 8,
- },
- GB7BAA => {
- 11 => 5,
- 12 => 8,
- 16 => 8,
- 17 => 8,
- 19 => 8,
- 21 => 8,
- },
- );
+ # the per node hop control thingy
+
+
+ %nodehops =
+ (
+ GB7ADX => { 11 => 8,
+ 12 => 8,
+ 16 => 8,
+ 17 => 8,
+ 19 => 8,
+ 21 => 8,
+ },
+
+ GB7UDX => { 11 => 8,
+ 12 => 8,
+ 16 => 8,
+ 17 => 8,
+ 19 => 8,
+ 21 => 8,
+ },
+ GB7BAA => {
+ 11 => 5,
+ 12 => 8,
+ 16 => 8,
+ 17 => 8,
+ 19 => 8,
+ 21 => 8,
+ },
+ );
- 'DB0FHF-15' => {
- 11 => 5,
- 12 => 8,
- 16 => 8,
- 17 => 8,
- 19 => 8,
- 21 => 8,
- },
+ 'DB0FHF-15' => {
+ 11 => 5,
+ 12 => 8,
+ 16 => 8,
+ 17 => 8,
+ 19 => 8,
+ 21 => 8,
+ },
- set/baddx video wsjt
+ set/baddx video wsjt
+ real or rt - Format the output the same as for real time spots. The formats are deliberately different (so you can tell one sort from the other). This is useful for some logging programs that can't cope with normal sh/dx output. An alias of SHOW/FDX is available.
+
+
+
+ filter - Filter the spots, before output, with the user's spot filter. An alias of SHOW/MYDX is available.
+
+
+
+ zone <zones> - look for spots in the cq zone (or zones) specified. zones are numbers separated by commas.
+
+
+
+ by_zone <zones> - look for spots spotted by people in the cq zone specified.
+
+
+
+ itu <itus> - look for spots in the itu zone (or zones) specified itu zones are numbers separated by commas.
+
+
+
+ by_itu <itus> - look for spots spotted by people in the itu zone specified.
+
+
+
+ state <list> - look for spots in the US state (or states) specified The list is two letter state codes separated by commas.
+
+
+
+ by_state <list> - look for spots spotted by people in the US state specified.
+
+
+
e.g.
- SH/DX 9m0 SH/DX on 20m info iota SH/DX 9a on vhf day 30 SH/DX rf1p qsl SH/DX iota SH/DX iota eu-064 SH/DX qra jn86 SH/DX dxcc oq2 SH/DX dxcc oq2 by w dxcc
+ SH/DX 9m0 SH/DX on 20m info iota SH/DX 9a on vhf day 30 SH/DX rf1p qsl SH/DX iota SH/DX iota eu-064 SH/DX qra jn86 SH/DX dxcc oq2 SH/DX dxcc oq2 by w dxcc SH/DX zone 4,5,6 SH/DX by_zone 4,5,6 SH/DX state in,oh SH/DX by_state in,oh
This can be done with the SHOW/DX command like this:-
+ SH/DX dxcc g SH/DX dxcc w on 20m iota
- SH/DX dxcc g SH/DX dxcc w on 20m iota
+ This is an alias for: SH/DX dxcc
\e[1m11.178. show/dxqsl <callsign> (0)\e[0m
reasonably accurate ifit is spotted enough times.For example:-
- sh/dxqsl 4k9w
+
+ sh/dxqsl 4k9w
Show the total DX spots for the last <days> no of days (default is
31), starting from a <date> (default: today).
- \e[1m11.180. show/files [<filearea> [<string>]] (0)\e[0m
+ \e[1m11.180. show/fdx (0)\e[0m
+
+ \e[1mshow/fdx \e[22mShow the DX data in realtime format.
+
+ Normally SHOW/DX outputs spot data in a different format to
+ therealtime data. This is a deliberate policy (so you can tell the
+ difference between the two). Some logging programs cannot handlethis
+ so SHOW/FDX outputs historical data in real time format.This is an
+ alias for: SHOW/DX real
+
+ \e[1m11.181. show/files [<filearea> [<string>]] (0)\e[0m
\e[1mshow/files [<filearea> [<string>]] \e[22mList the contents of a filearea
See also TYPE - to see the contents of a file.
- \e[1m11.181. show/filter (0)\e[0m
+ \e[1m11.182. show/filter (0)\e[0m
\e[1mshow/filter \e[22mShow the contents of all the filters you have set
-
Show the contents of all the filters that are set. This command
displaysall the filters set - for all the various categories.
- \e[1m11.182. show/hfstats [days] [date] (0)\e[0m
+ \e[1m11.183. show/hfstats [days] [date] (0)\e[0m
\e[1mshow/hfstats [days] [date] \e[22mShow the HF DX Statistics
+
Show the HF DX spots breakdown by band for the last <days> no of days
(default is 31), starting from a <date> (default: today).
- \e[1m11.183. show/hftable [days] [date] [prefix ...] (0)\e[0m
+ \e[1m11.184. show/hftable [days] [date] [prefix ...] (0)\e[0m
\e[1mshow/hftable [days] [date] [prefix ...] \e[22mShow the HF DX Spotter Table
- \e[1m11.184. show/hops <call> [ann|spots|route|wcy|wwv] (8)\e[0m
+ \e[1m11.185. show/hops <call> [ann|spots|route|wcy|wwv] (8)\e[0m
\e[1mshow/hops <call> [ann|spots|route|wcy|wwv] \e[22mShow the hop counts for a
node
specifywhich category you want to see. If you leave the category out
then all the categories will be listed.
-
-
- \e[1m11.185. show/isolate (1)\e[0m
+ \e[1m11.186. show/isolate (1)\e[0m
\e[1mshow/isolate \e[22mShow list of ISOLATED nodes
-
\e[1m11.18
6. show/lockout <prefix>|all (9)
\e[0m
+
\e[1m11.18
7. show/lockout <prefix>|all (9)
\e[0m
\e[1mshow/lockout <prefix>|all
\e[22mShow the list of locked out or excluded
callsigns
-
-
- \e[1m11.187. show/log [<callsign>] (8)\e[0m
+ \e[1m11.188. show/log [<callsign>] (8)\e[0m
\e[1mshow/log [<callsign>] \e[22mShow excerpts from the system log
will output a general logfile. With the optional callsign it willshow
output from the log associated with that callsign.
-
\e[1m11.18
8. show/moon [ndays] [<prefix>|<callsign>] (0)
\e[0m
+
\e[1m11.18
9. show/moon [ndays] [<prefix>|<callsign>] (0)
\e[0m
\e[1mshow/moon [ndays] [<prefix>|<callsign>]
\e[22mShow Moon rise and set times
note that the rise and set times are given as the UT times of rise and
set on the requested UT day.
-
\e[1m11.1
89. show/muf <prefix> [<hours>][long] (0)
\e[0m
+
\e[1m11.1
90. show/muf <prefix> [<hours>][long] (0)
\e[0m
\e[1mshow/muf <prefix> [<hours>][long]
\e[22mShow the likely propagation to a
prefix
Itshould be noted that the figures will probably not be very useful,
norterrible accurate, but it is included for completeness.
- \e[1m11.190. show/newconfiguration [<node>] (0)\e[0m
+ \e[1m11.191. show/mydx (0)\e[0m
+
+ \e[1mshow/mydx \e[22mShow the DX data filtered with your spot filter.
+
+ SHOW/DX potentially shows all the spots available in the system.
+ UsingSHOW/MYDX will, instead, filter the availble spots using any spot
+ filter that you have set, first. This command, together with
+ ACCEPT/SPOT or REJECT/SPOT, will allowyou to customise the spots that
+ you receive.So if you have said: ACC/SPOT on hfDoing a SHOW/MYDX will
+ now only, ever, show HF spots. All the other options on SH/DX can
+ still be used.
+
+ \e[1m11.192. show/newconfiguration [<node>] (0)\e[0m
\e[1mshow/newconfiguration [<node>] \e[22mShow all the nodes and users visible
the duplication ofany routes that might be present It also uses a
different formatwhich may not take up quite as much space if you don't
have anyloops.BE WARNED: the list that is returned can be VERY long
- \e[1m11.191. show/newconfiguration/node (0)\e[0m
+
+ \e[1m11.193. show/newconfiguration/node (0)\e[0m
\e[1mshow/newconfiguration/node \e[22mShow all the nodes connected locally
Show all the nodes connected to this node in the new format.
- \e[1m11.192. show/node [<callsign> ...] (1)\e[0m
+ \e[1m11.194. show/node [<callsign> ...] (1)\e[0m
\e[1mshow/node [<callsign> ...] \e[22mShow the type and version number of nodes
thecommand line. If no callsigns are specified then a sorted list of
allthe non-user callsigns known to the system will be displayed.
- \e[1m11.193. show/prefix <callsign> (0)\e[0m
+ \e[1m11.195. show/prefix <callsign> (0)\e[0m
\e[1mshow/prefix <callsign> \e[22mInterrogate the prefix database
with the internal country no, the CQ and ITU regions. See also
SHOW/DXCC
- \e[1m11.194. show/program (5)\e[0m
+ \e[1m11.196. show/program (5)\e[0m
\e[1mshow/program \e[22mShow the locations of all the included program modules
Thisis useful for checking where you think you have loaded a .pm file
from.
- \e[1m11.195. show/qra <lat> <long> (0)\e[0m
+ \e[1m11.197. show/qra <lat> <long> (0)\e[0m
\e[1mshow/qra <lat> <long> \e[22mConvert lat/long to a QRA Grid locator
- \e[1m11.196. show/qra <locator> [<locator>] (0)\e[0m
+ \e[1m11.198. show/qra <locator> [<locator>] (0)\e[0m
\e[1mshow/qra <locator> [<locator>] \e[22mShow distance between QRA Grid locators
-
- \e[1m11.197. show/qrz <callsign> (0)\e[0m
+ \e[1m11.199. show/qrz <callsign> (0)\e[0m
\e[1mshow/qrz <callsign> \e[22mShow any callbook details on a callsign
provided for users of this software by http://www.qrz.com See also
SHOW/WM7D for an alternative.
-
\e[1m11.
198. show/registered [<prefix>] (9)
\e[0m
+
\e[1m11.
200. show/registered [<prefix>] (9)
\e[0m
\e[1mshow/registered [<prefix>]
\e[22mShow the registered users
- \e[1m11.199. show/route <callsign> ... (0)\e[0m
+ \e[1m11.201. show/route <callsign> ... (0)\e[0m
\e[1mshow/route <callsign> ... \e[22mShow the route to the callsign
- \e[1m11.200. show/satellite <name> [<hours> <interval>] (0)\e[0m
+ \e[1m11.202. show/satellite <name> [<hours> <interval>] (0)\e[0m
\e[1mshow/satellite <name> [<hours> <interval>] \e[22mShow tracking data
- \e[1m11.201. show/station all [<regex>] (6)\e[0m
+ \e[1m11.203. show/station all [<regex>] (6)\e[0m
\e[1mshow/station all [<regex>] \e[22mShow list of users in the system
- \e[1m11.202. show/station [<callsign> ..] (0)\e[0m
+ \e[1m11.204. show/station [<callsign> ..] (0)\e[0m
\e[1mshow/station [<callsign> ..] \e[22mShow information about a callsign
If no callsign is given then show the information for yourself.
-
\e[1m11.20
3. show/sun [ndays] [<prefix>|<callsign>] (0)
\e[0m
+
\e[1m11.20
5. show/sun [ndays] [<prefix>|<callsign>] (0)
\e[0m
\e[1mshow/sun [ndays] [<prefix>|<callsign>]
\e[22mShow sun rise and set times
note that the rise and set times are given as the UT times of rise and
set on the requested UT day.
-
\e[1m11.20
4. show/time [<prefix>|<callsign>] (0)
\e[0m
+
\e[1m11.20
6. show/time [<prefix>|<callsign>] (0)
\e[0m
\e[1mshow/time [<prefix>|<callsign>]
\e[22mShow the local time
prefixesthen it will show UTC and UTC + the local offset (not
including DST) atthe prefixes or callsigns that you specify.
- \e[1m11.205. show/usdb [call ..] (0)\e[0m
+ \e[1m11.207. show/usdb [call ..] (0)\e[0m
\e[1mshow/usdb [call ..] \e[22mShow information held on the FCC Call database
- \e[1m11.206. show/vhfstats [days] [date] (0)\e[0m
+ \e[1m11.208. show/vhfstats [days] [date] (0)\e[0m
\e[1mshow/vhfstats [days] [date] \e[22mShow the VHF DX Statistics
(default is 31), starting from a date (default: today).
- \e[1m11.207. show/vhftable [days] [date] [prefix ...] (0)\e[0m
+ \e[1m11.209. show/vhftable [days] [date] [prefix ...] (0)\e[0m
\e[1mshow/vhftable [days] [date] [prefix ...] \e[22mShow the VHF DX Spotter Table
- \e[1m11.208. show/wcy (0)\e[0m
+ \e[1m11.210. show/wcy (0)\e[0m
\e[1mshow/wcy \e[22mShow last 10 WCY broadcasts
- \e[1m11.209. show/wcy <n> (0)\e[0m
+ \e[1m11.211. show/wcy <n> (0)\e[0m
\e[1mshow/wcy <n> \e[22mShow last <n> WCY broadcasts
Display the most recent WCY information that has been received by the
system
- \e[1m11.210. show/wm7d <callsign> (0)\e[0m
+ \e[1m11.212. show/wm7d <callsign> (0)\e[0m
\e[1mshow/wm7d <callsign> \e[22mShow callbook details on a US callsigns
provided for users of this software by http://www.wm7d.net.See also
SHOW/QRZ.
- \e[1m11.211. show/wwv (0)\e[0m
+ \e[1m11.213. show/wwv (0)\e[0m
\e[1mshow/wwv \e[22mShow last 10 WWV broadcasts
- \e[1m11.212. show/wwv <n> (0)\e[0m
+ \e[1m11.214. show/wwv <n> (0)\e[0m
\e[1mshow/wwv <n> \e[22mShow last <n> WWV broadcasts
Display the most recent WWV information that has been received by the
system
- \e[1m11.213. shutdown (5)\e[0m
+ \e[1m11.215. shutdown (5)\e[0m
\e[1mshutdown \e[22mShutdown the cluster
Shutdown the cluster and disconnect all the users
- \e[1m11.214. spoof <call> <command> (9)\e[0m
+ \e[1m11.216. spoof <call> <command> (9)\e[0m
\e[1mspoof <call> <command> \e[22mDo a command as though you are another user
- \e[1m11.215. stat/channel [<callsign>] (5)\e[0m
+ \e[1m11.217. stat/channel [<callsign>] (5)\e[0m
\e[1mstat/channel [<callsign>] \e[22mShow the status of a channel on the cluster
that you are on or else for the callsign that you asked for.Only the
fields that are defined (in perl term) will be displayed.
- \e[1m11.216. stat/db <dbname> (5)\e[0m
+ \e[1m11.218. stat/db <dbname> (5)\e[0m
\e[1mstat/db <dbname> \e[22mShow the status of a database
privilege level you will see more or less information. This command is
unlikely to be of much use to anyone other than a sysop.
- \e[1m11.217. stat/msg (1)\e[0m
+ \e[1m11.219. stat/msg (1)\e[0m
\e[1mstat/msg \e[22mShow the status of the message system
- \e[1m11.218. stat/msg <msgno> (1)\e[0m
+ \e[1m11.220. stat/msg <msgno> (1)\e[0m
\e[1mstat/msg <msgno> \e[22mShow the status of a message
- \e[1m11.219. stat/route_node <callsign> (5)\e[0m
+ \e[1m11.221. stat/route_node <callsign> (5)\e[0m
\e[1mstat/route_node <callsign> \e[22mShow the data in a Route::Node object
- \e[1m11.220. stat/route_node all (5)\e[0m
+ \e[1m11.222. stat/route_node all (5)\e[0m
\e[1mstat/route_node all \e[22mShow list of all Route::Node objects
- \e[1m11.221. stat/route_user <callsign> (5)\e[0m
+ \e[1m11.223. stat/route_user <callsign> (5)\e[0m
\e[1mstat/route_user <callsign> \e[22mShow the data in a Route::User object
- \e[1m11.222. stat/route_user all (5)\e[0m
+ \e[1m11.224. stat/route_user all (5)\e[0m
\e[1mstat/route_user all \e[22mShow list of all Route::User objects
- \e[1m11.223. stat/user [<callsign>] (5)\e[0m
+ \e[1m11.225. stat/user [<callsign>] (5)\e[0m
\e[1mstat/user [<callsign>] \e[22mShow the full status of a user
flagsand stuff.Only the fields that are defined (in perl term) will be
displayed.
- \e[1m11.224. sysop (0)\e[0m
+ \e[1m11.226. sysop (0)\e[0m
\e[1msysop \e[22mRegain your privileges if you login remotely
offerednumbers but nothing will happen when you input a string. Any
match iscase sensitive.
- \e[1m11.225. talk <call> > <node> [<text>] (0)\e[0m
+ \e[1m11.227. talk <call> > <node> [<text>] (0)\e[0m
\e[1mtalk <call> > <node> [<text>] \e[22mSend a text message to another station
via a node
will send the hftable as you have it to all the people you are cur-
rently talking to.
- \e[1m11.226. talk <call> [<text>] (0)\e[0m
+ \e[1m11.228. talk <call> [<text>] (0)\e[0m
\e[1mtalk <call> [<text>] \e[22mSend a text message to another station
- \e[1m11.227. type <filearea>/<name> (0)\e[0m
+ \e[1m11.229. type <filearea>/<name> (0)\e[0m
\e[1mtype <filearea>/<name> \e[22mLook at the contents of a file in one of the
fileareas
See also SHOW/FILES to see what fileareas are available and a list of
content.
- \e[1m11.228. uncatchup <node call> all|[msgno> ...] (5)\e[0m
+ \e[1m11.230. uncatchup <node call> all|[msgno> ...] (5)\e[0m
\e[1muncatchup <node call> all|[msgno> ...] \e[22mUnmark a message as sent
which will arrange for them to be forward candidates again.Order is
not important.
- \e[1m11.229. unset/announce (0)\e[0m
+ \e[1m11.231. unset/announce (0)\e[0m
\e[1munset/announce \e[22mStop announce messages coming out on your terminal
- \e[1m11.230. unset/anntalk (0)\e[0m
+ \e[1m11.232. unset/anntalk (0)\e[0m
\e[1munset/anntalk \e[22mStop talk like announce messages on your terminal
allows you to see them again. This is the default.
- \e[1m11.231. unset/baddx <call>.. (8)\e[0m
+ \e[1m11.233. unset/baddx <call>.. (8)\e[0m
\e[1munset/baddx <call>.. \e[22mPropagate a dx spot with this callsign again
- \e[1m11.232. unset/badnode <call>.. (8)\e[0m
+ \e[1m11.234. unset/badnode <call>.. (8)\e[0m
\e[1munset/badnode <call>.. \e[22mAllow spots from this node again
will allow spots from him again.Use with extreme care. This command
may well be superceeded by FILTERing.
- \e[1m11.233. unset/badspotter <call>.. (8)\e[0m
+ \e[1m11.235. unset/badspotter <call>.. (8)\e[0m
\e[1munset/badspotter <call>.. \e[22mAllow spots from this callsign again
will allow spots from him again.Use with extreme care. This command
may well be superceded by FILTERing.
- \e[1m11.234. unset/badword <word>.. (8)\e[0m
+ \e[1m11.236. unset/badword <word>.. (8)\e[0m
\e[1munset/badword <word>.. \e[22mPropagate things with this word again
will allow text with this word again.
- \e[1m11.235. unset/beep (0)\e[0m
+ \e[1m11.237. unset/beep (0)\e[0m
\e[1munset/beep \e[22mStop beeps for DX and other messages on your terminal
- \e[1m11.236. unset/debug <name> (9)\e[0m
+ \e[1m11.238. unset/debug <name> (9)\e[0m
\e[1munset/debug <name> \e[22mRemove a debug level from the debug set
You can show what levels you are logging with SHOW/DEBUG
- \e[1m11.237. unset/dx (0)\e[0m
+ \e[1m11.239. unset/dx (0)\e[0m
\e[1munset/dx \e[22mStop DX messages coming out on your terminal
- \e[1m11.238. unset/dxcq (0)\e[0m
+ \e[1m11.240. unset/dxcq (0)\e[0m
\e[1munset/dxcq \e[22mStop CQ Zones on the end of DX announcements
SHOW/USSTATEDo a STAT/USER to see which flags you have set if you are
confused.
- \e[1m11.239. unset/dxgrid (0)\e[0m
+ \e[1m11.241. unset/dxgrid (0)\e[0m
\e[1munset/dxgrid \e[22mStop QRA Grid Squares on the end of DX announcements
feature.Conflicts with: SET/DXCQ, SET/DXITUDo a STAT/USER to see which
flags you have set if you are confused.
- \e[1m11.240. unset/dxitu (0)\e[0m
+ \e[1m11.242. unset/dxitu (0)\e[0m
\e[1munset/dxitu \e[22mStop ITU Zones on the end of DX announcements
SHOW/USSTATEDo a STAT/USER to see which flags you have set if you are
confused.
- \e[1m11.241. unset/echo (0)\e[0m
+ \e[1m11.243. unset/echo (0)\e[0m
\e[1munset/echo \e[22mStop the cluster echoing your input
setting appropriately. The setting is stored in your user profile.YOU
DO NOT NEED TO USE THIS COMMAND IF YOU ARE CONNECTED VIA AX25.
- \e[1m11.242. unset/email (0)\e[0m
+ \e[1m11.244. unset/email (0)\e[0m
\e[1munset/email \e[22mStop personal msgs being forwarded by email
- \e[1m11.243. unset/here (0)\e[0m
+ \e[1m11.245. unset/here (0)\e[0m
\e[1munset/here \e[22mTell the system you are absent from your terminal
- \e[1m11.244. unset/hops <call> ann|spots|route|wwv|wcy (8)\e[0m
+ \e[1m11.246. unset/hops <call> ann|spots|route|wwv|wcy (8)\e[0m
\e[1munset/hops <call> ann|spots|route|wwv|wcy \e[22mUnset hop count
- \e[1m11.245. unset/isolate (9)\e[0m
+ \e[1m11.247. unset/isolate (9)\e[0m
\e[1munset/isolate \e[22mStop Isolation of a node from the rest of the network
Remove isolation from a node - SET/ISOLATE
- \e[1m11.246. unset/lockout <call> (9)\e[0m
+ \e[1m11.248. unset/lockout <call> (9)\e[0m
\e[1munset/lockout <call> \e[22mAllow a callsign to connect to the cluster
- \e[1m11.247. unset/logininfo (0)\e[0m
+ \e[1m11.249. unset/logininfo (0)\e[0m
\e[1munset/logininfo \e[22mInform when a station logs out locally
- \e[1m11.248. unset/password <call> ... (9)\e[0m
+ \e[1m11.250. unset/password <call> ... (9)\e[0m
\e[1munset/password <call> ... \e[22mDelete (remove) a user's password
This command allows the sysop to completely delete and remove a
password for a user.
- \e[1m11.249. unset/privilege (0)\e[0m
+ \e[1m11.251. unset/privilege (0)\e[0m
\e[1munset/privilege \e[22mRemove any privilege for this session
will need toeither logout and login again (if you are on a console) or
use theSYSOP command.
- \e[1m11.250. unset/prompt (0)\e[0m
+ \e[1m11.252. unset/prompt (0)\e[0m
\e[1munset/prompt \e[22mSet your prompt back to default
UNSET/PROMPT will undo the SET/PROMPT command and set you prompt back
tonormal.
- \e[1m11.251. unset/register <call> ... (9)\e[0m
+ \e[1m11.253. unset/register <call> ... (9)\e[0m
\e[1munset/register <call> ... \e[22mMark a user as not registered
exception to this is that a non-registered user can TALK orSEND
messages to the sysop.
- \e[1m11.252. unset/talk (0)\e[0m
+ \e[1m11.254. unset/talk (0)\e[0m
\e[1munset/talk \e[22mStop TALK messages coming out on your terminal
- \e[1m11.253. unset/usstate (0)\e[0m
+ \e[1m11.255. unset/usstate (0)\e[0m
\e[1munset/usstate \e[22mStop US State info on the end of DX announcements
SET/DXITUDo a STAT/USER to see which flags you have set if you are
confused.
- \e[1m11.254. unset/wcy (0)\e[0m
+ \e[1m11.256. unset/wcy (0)\e[0m
\e[1munset/wcy \e[22mStop WCY messages coming out on your terminal
- \e[1m11.255. unset/wwv (0)\e[0m
+ \e[1m11.257. unset/wwv (0)\e[0m
\e[1munset/wwv \e[22mStop WWV messages coming out on your terminal
- \e[1m11.256. unset/wx (0)\e[0m
+ \e[1m11.258. unset/wx (0)\e[0m
\e[1munset/wx \e[22mStop WX messages coming out on your terminal
- \e[1m11.257. who (0)\e[0m
+ \e[1m11.259. who (0)\e[0m
\e[1mwho \e[22mShow who is physically connected
This is a quick listing that shows which callsigns are connected
andwhat sort of connection they have
- \e[1m11.258. wx <text> (0)\e[0m
+ \e[1m11.260. wx <text> (0)\e[0m
\e[1mwx <text> \e[22mSend a weather message to local users
- \e[1m11.259. wx full <text> (0)\e[0m
+ \e[1m11.261. wx full <text> (0)\e[0m
\e[1mwx full <text> \e[22mSend a weather message to all cluster users
- \e[1m11.260. wx sysop <text> (5)\e[0m
+ \e[1m11.262. wx sysop <text> (5)\e[0m
\e[1mwx sysop <text> \e[22mSend a weather message to other clusters only
down this route!
- \e[1m' \e[22m' is the delimiting character for a word or phrase of an
- expect/send line in a chat type script. The words/phrases
- normally come in pairs, either can be empty. Each line reads
- input from the connection until it sees the string (or perl
- regular expression) contained in the left hand string. If the
- left hand string is empty then it doesn't read or wait for
- anything. The comparison is done ignoring case. When the left
- hand string has found what it is looking for (if it is) then the
- right hand string is sent to the connection. This process is
- repeated for every line of chat script.
+ \e[1m' \e[22mline in a chat type script. The words/phrases normally come in
+ pairs, either can be empty. Each line reads input from the
+ connection until it sees the string (or perl regular expression)
+ contained in the left hand string. If the left hand string is
+ empty then it doesn't read or wait for anything. The comparison
+ is done ignoring case. When the left hand string has found what
+ it is looking for (if it is) then the right hand string is sent
+ to the connection. This process is repeated for every line of
+ chat script.
\e[1mclient\e[0m
# you can leave this out if you call this script 'gb7djk'
client gb7djk telnet
+
Both these examples assume that everything is set up properly at the
other end. You will find other examples in the /spider/examples
directory.
12.90 show/dxcc <prefix>
12.91 show/dxqsl <callsign>
12.92 show/dxstats [days] [date]
- 12.93 show/files [<filearea> [<string>]]
- 12.94 show/filter
- 12.95 show/hfstats [days] [date]
- 12.96 show/hftable [days] [date] [prefix ...]
- 12.97 show/moon [ndays] [<prefix>|<callsign>]
- 12.98 show/muf <prefix> [<hours>][long]
- 12.99 show/newconfiguration [<node>]
- 12.100 show/newconfiguration/node
- 12.101 show/prefix <callsign>
- 12.102 show/qra <lat> <long>
- 12.103 show/qra <locator> [<locator>]
- 12.104 show/qrz <callsign>
- 12.105 show/route <callsign> ...
- 12.106 show/satellite <name> [<hours> <interval>]
- 12.107 show/station [<callsign> ..]
- 12.108 show/sun [ndays] [<prefix>|<callsign>]
- 12.109 show/time [<prefix>|<callsign>]
- 12.110 show/usdb [call ..]
- 12.111 show/vhfstats [days] [date]
- 12.112 show/vhftable [days] [date] [prefix ...]
- 12.113 show/wcy
- 12.114 show/wcy <n>
- 12.115 show/wm7d <callsign>
- 12.116 show/wwv
- 12.117 show/wwv <n>
- 12.118 sysop
- 12.119 talk <call> > <node> [<text>]
- 12.120 talk <call> [<text>]
- 12.121 type <filearea>/<name>
- 12.122 unset/announce
- 12.123 unset/anntalk
- 12.124 unset/beep
- 12.125 unset/dx
- 12.126 unset/dxcq
- 12.127 unset/dxgrid
- 12.128 unset/dxitu
- 12.129 unset/echo
- 12.130 unset/email
- 12.131 unset/here
- 12.132 unset/logininfo
- 12.133 unset/privilege
- 12.134 unset/prompt
- 12.135 unset/talk
- 12.136 unset/usstate
- 12.137 unset/wcy
- 12.138 unset/wwv
- 12.139 unset/wx
- 12.140 who
- 12.141 wx <text>
- 12.142 wx full <text>
+ 12.93 show/fdx
+ 12.94 show/files [<filearea> [<string>]]
+ 12.95 show/filter
+ 12.96 show/hfstats [days] [date]
+ 12.97 show/hftable [days] [date] [prefix ...]
+ 12.98 show/moon [ndays] [<prefix>|<callsign>]
+ 12.99 show/muf <prefix> [<hours>][long]
+ 12.100 show/mydx
+ 12.101 show/newconfiguration [<node>]
+ 12.102 show/newconfiguration/node
+ 12.103 show/prefix <callsign>
+ 12.104 show/qra <lat> <long>
+ 12.105 show/qra <locator> [<locator>]
+ 12.106 show/qrz <callsign>
+ 12.107 show/route <callsign> ...
+ 12.108 show/satellite <name> [<hours> <interval>]
+ 12.109 show/station [<callsign> ..]
+ 12.110 show/sun [ndays] [<prefix>|<callsign>]
+ 12.111 show/time [<prefix>|<callsign>]
+ 12.112 show/usdb [call ..]
+ 12.113 show/vhfstats [days] [date]
+ 12.114 show/vhftable [days] [date] [prefix ...]
+ 12.115 show/wcy
+ 12.116 show/wcy <n>
+ 12.117 show/wm7d <callsign>
+ 12.118 show/wwv
+ 12.119 show/wwv <n>
+ 12.120 sysop
+ 12.121 talk <call> > <node> [<text>]
+ 12.122 talk <call> [<text>]
+ 12.123 type <filearea>/<name>
+ 12.124 unset/announce
+ 12.125 unset/anntalk
+ 12.126 unset/beep
+ 12.127 unset/dx
+ 12.128 unset/dxcq
+ 12.129 unset/dxgrid
+ 12.130 unset/dxitu
+ 12.131 unset/echo
+ 12.132 unset/email
+ 12.133 unset/here
+ 12.134 unset/logininfo
+ 12.135 unset/privilege
+ 12.136 unset/prompt
+ 12.137 unset/talk
+ 12.138 unset/usstate
+ 12.139 unset/wcy
+ 12.140 unset/wwv
+ 12.141 unset/wx
+ 12.142 who
+ 12.143 wx <text>
+ 12.144 wx full <text>
______________________________________________________________________
\e[1mExamples:\e[0m
-
-
- connect GB7MBC
- connect GB7MBC-1
+ connect GB7MBC
+ connect GB7MBC-1
+ real or rt - Format the output the same as for real time spots. The
+ formats are deliberately different (so you can tell
+ one sort from the other). This is useful for some
+ logging programs that can't cope with normal sh/dx
+ output. An alias of SHOW/FDX is available.
+
+
+
+ filter - Filter the spots, before output, with the user's
+ spot filter. An alias of SHOW/MYDX is available.
+
+
+ zone <zones> - look for spots in the cq zone (or zones) specified.
+ zones are numbers separated by commas.
+
+
+
+ by_zone <zones> - look for spots spotted by people in the cq zone
+ specified.
+
+
+
+ itu <itus> - look for spots in the itu zone (or zones) specified
+ itu zones are numbers separated by commas.
+
+
+
+ by_itu <itus> - look for spots spotted by people in the itu zone
+ specified.
+
+
+
+ state <list> - look for spots in the US state (or states) specified
+ The list is two letter state codes separated by commas.
+
+
+
+ by_state <list> - look for spots spotted by people in the US state
+ specified.
+
+
+
e.g.
SH/DX qra jn86
SH/DX dxcc oq2
SH/DX dxcc oq2 by w dxcc
+ SH/DX zone 4,5,6
+ SH/DX by_zone 4,5,6
+ SH/DX state in,oh
+ SH/DX by_state in,oh
+ This is an alias for: SH/DX dxcc
+
\e[1m12.91. show/dxqsl <callsign>\e[0m
\e[1mshow/dxqsl <callsign> \e[22mShow any QSL info gathered from spots
For example:-
-
-
sh/dxqsl 4k9w
+
You can check the raw input spots yourself with:-
Show the total DX spots for the last <days> no of days (default is
31), starting from a <date> (default: today).
- \e[1m12.93. show/files [<filearea> [<string>]]\e[0m
+ \e[1m12.93. show/fdx\e[0m
+
+ \e[1mshow/fdx \e[22mShow the DX data in realtime format.
+
+
+ Normally SHOW/DX outputs spot data in a different format to the
+ realtime data. This is a deliberate policy (so you can tell the
+ difference between the two). Some logging programs cannot handle this
+ so SHOW/FDX outputs historical data in real time format.
+
+ This is an alias for: SHOW/DX real
+
+ \e[1m12.94. show/files [<filearea> [<string>]]\e[0m
\e[1mshow/files [<filearea> [<string>]] \e[22mList the contents of a filearea
See also TYPE - to see the contents of a file.
- \e[1m12.94. show/filter\e[0m
+
+ \e[1m12.95. show/filter\e[0m
\e[1mshow/filter \e[22mShow the contents of all the filters you have set
Show the contents of all the filters that are set. This command
displays all the filters set - for all the various categories.
- \e[1m12.95. show/hfstats [days] [date]\e[0m
+ \e[1m12.96. show/hfstats [days] [date]\e[0m
\e[1mshow/hfstats [days] [date] \e[22mShow the HF DX Statistics
Show the HF DX spots breakdown by band for the last <days> no of days
(default is 31), starting from a <date> (default: today).
-
-
- \e[1m12.96. show/hftable [days] [date] [prefix ...]\e[0m
+ \e[1m12.97. show/hftable [days] [date] [prefix ...]\e[0m
\e[1mshow/hftable [days] [date] [prefix ...] \e[22mShow the HF DX Spotter Table
-
\e[1m12.9
7. show/moon [ndays] [<prefix>|<callsign>]
\e[0m
+
\e[1m12.9
8. show/moon [ndays] [<prefix>|<callsign>]
\e[0m
\e[1mshow/moon [ndays] [<prefix>|<callsign>]
\e[22mShow Moon rise and set times
+
Show the Moon rise and set times for a (list of) prefixes or
callsigns, together with the azimuth and elevation of the sun
currently at those locations.
Please note that the rise and set times are given as the UT times of
rise and set on the requested UT day.
-
\e[1m12.98. show/muf <prefix> [<hours>][long]
\e[0m
+
+
+
\e[1m12.99. show/muf <prefix> [<hours>][long]
\e[0m
\e[1mshow/muf <prefix> [<hours>][long]
\e[22mShow the likely propagation to a
prefix
- SH/MUF W L 24
- SH/MUF W 24 Long
+ SH/MUF W L 24
+ SH/MUF W 24 Long
should be noted that the figures will probably not be very useful, nor
terrible accurate, but it is included for completeness.
- \e[1m12.99. show/newconfiguration [<node>]\e[0m
+ \e[1m12.100. show/mydx\e[0m
+
+ \e[1mshow/mydx \e[22mShow the DX data filtered with your spot filter.
+
+
+ SHOW/DX potentially shows all the spots available in the system. Using
+ SHOW/MYDX will, instead, filter the availble spots using any spot
+ filter that you have set, first.
+
+ This command, together with ACCEPT/SPOT or REJECT/SPOT, will allow you
+ to customise the spots that you receive.
+
+ So if you have said: ACC/SPOT on hf
+
+ Doing a SHOW/MYDX will now only, ever, show HF spots. All the other
+ options on SH/DX can still be used.
+
+ \e[1m12.101. show/newconfiguration [<node>]\e[0m
\e[1mshow/newconfiguration [<node>] \e[22mShow all the nodes and users visible
BE WARNED: the list that is returned can be VERY long
- \e[1m12.100. show/newconfiguration/node\e[0m
+ \e[1m12.102. show/newconfiguration/node\e[0m
\e[1mshow/newconfiguration/node \e[22mShow all the nodes connected locally
Show all the nodes connected to this node in the new format.
- \e[1m12.101. show/prefix <callsign>\e[0m
+ \e[1m12.103. show/prefix <callsign>\e[0m
\e[1mshow/prefix <callsign> \e[22mInterrogate the prefix database
See also SHOW/DXCC
- \e[1m12.102. show/qra <lat> <long>\e[0m
+ \e[1m12.104. show/qra <lat> <long>\e[0m
\e[1mshow/qra <lat> <long> \e[22mConvert lat/long to a QRA Grid locator
from yourself, the second example will calculate the distance and
bearing from the first locator to the second. You can use 4 or 6
character locators.
+
It is also possible to convert a latitude and longitude to a locator
by using this command with a latitude and longitude as an argument,
for example:-
- \e[1m12.103. show/qra <locator> [<locator>]\e[0m
+ \e[1m12.105. show/qra <locator> [<locator>]\e[0m
\e[1mshow/qra <locator> [<locator>] \e[22mShow distance between QRA Grid locators
- \e[1m12.104. show/qrz <callsign>\e[0m
+ \e[1m12.106. show/qrz <callsign>\e[0m
\e[1mshow/qrz <callsign> \e[22mShow any callbook details on a callsign
See also SHOW/WM7D for an alternative.
- \e[1m12.105. show/route <callsign> ...\e[0m
+
+
+ \e[1m12.107. show/route <callsign> ...\e[0m
\e[1mshow/route <callsign> ... \e[22mShow the route to the callsign
- \e[1m12.106. show/satellite <name> [<hours> <interval>]\e[0m
+ \e[1m12.108. show/satellite <name> [<hours> <interval>]\e[0m
\e[1mshow/satellite <name> [<hours> <interval>] \e[22mShow tracking data
- \e[1m12.107. show/station [<callsign> ..]\e[0m
+ \e[1m12.109. show/station [<callsign> ..]\e[0m
\e[1mshow/station [<callsign> ..] \e[22mShow information about a callsign
If no callsign is given then show the information for yourself.
-
\e[1m12.108. show/sun [ndays] [<prefix>|<callsign>]
\e[0m
+
+
\e[1m12.110. show/sun [ndays] [<prefix>|<callsign>]
\e[0m
\e[1mshow/sun [ndays] [<prefix>|<callsign>]
\e[22mShow sun rise and set times
or in three days time:-
+
+
SH/SUN +3 W9
Please note that the rise and set times are given as the UT times of
rise and set on the requested UT day.
-
\e[1m12.1
09. show/time [<prefix>|<callsign>]
\e[0m
+
\e[1m12.1
11. show/time [<prefix>|<callsign>]
\e[0m
\e[1mshow/time [<prefix>|<callsign>]
\e[22mShow the local time
prefixes then it will show UTC and UTC + the local offset (not
including DST) at the prefixes or callsigns that you specify.
- \e[1m12.110. show/usdb [call ..]\e[0m
+ \e[1m12.112. show/usdb [call ..]\e[0m
\e[1mshow/usdb [call ..] \e[22mShow information held on the FCC Call database
+
Show the City and State of a Callsign held on the FCC database if his
is being run on this system, eg:-
- \e[1m12.111. show/vhfstats [days] [date]\e[0m
+ \e[1m12.113. show/vhfstats [days] [date]\e[0m
\e[1mshow/vhfstats [days] [date] \e[22mShow the VHF DX Statistics
Show the VHF DX spots breakdown by band for the last <days> no of days
(default is 31), starting from a date (default: today).
- \e[1m12.112. show/vhftable [days] [date] [prefix ...]\e[0m
+ \e[1m12.114. show/vhftable [days] [date] [prefix ...]\e[0m
\e[1mshow/vhftable [days] [date] [prefix ...] \e[22mShow the VHF DX Spotter Table
- \e[1m12.113. show/wcy\e[0m
+ \e[1m12.115. show/wcy\e[0m
\e[1mshow/wcy \e[22mShow last 10 WCY broadcasts
- \e[1m12.114. show/wcy <n>\e[0m
+ \e[1m12.116. show/wcy <n>\e[0m
\e[1mshow/wcy <n> \e[22mShow last <n> WCY broadcasts
system
- \e[1m12.115. show/wm7d <callsign>\e[0m
+ \e[1m12.117. show/wm7d <callsign>\e[0m
\e[1mshow/wm7d <callsign> \e[22mShow callbook details on a US callsigns
See also SHOW/QRZ.
- \e[1m12.116. show/wwv\e[0m
+ \e[1m12.118. show/wwv\e[0m
\e[1mshow/wwv \e[22mShow last 10 WWV broadcasts
- \e[1m12.117. show/wwv <n>\e[0m
+ \e[1m12.119. show/wwv <n>\e[0m
\e[1mshow/wwv <n> \e[22mShow last <n> WWV broadcasts
Display the most recent WWV information that has been received by the
system
- \e[1m12.118. sysop\e[0m
+ \e[1m12.120. sysop\e[0m
\e[1msysop \e[22mRegain your privileges if you login remotely
numbers but nothing will happen when you input a string. Any match is
case sensitive.
- \e[1m12.119. talk <call> > <node> [<text>]\e[0m
+ \e[1m12.121. talk <call> > <node> [<text>]\e[0m
\e[1mtalk <call> > <node> [<text>] \e[22mSend a text message to another station
via a node
will send the hftable as you have it to all the people you are
currently talking to.
- \e[1m12.120. talk <call> [<text>]\e[0m
+ \e[1m12.122. talk <call> [<text>]\e[0m
\e[1mtalk <call> [<text>] \e[22mSend a text message to another station
- \e[1m12.121. type <filearea>/<name>\e[0m
+ \e[1m12.123. type <filearea>/<name>\e[0m
\e[1mtype <filearea>/<name> \e[22mLook at the contents of a file in one of the
fileareas
enter:-
- TYPE bulletins/arld051
+ TYPE bulletins/arld051
See also SHOW/FILES to see what fileareas are available and a list of
content.
- \e[1m12.122. unset/announce\e[0m
+ \e[1m12.124. unset/announce\e[0m
\e[1munset/announce \e[22mStop announce messages coming out on your terminal
- \e[1m12.123. unset/anntalk\e[0m
+ \e[1m12.125. unset/anntalk\e[0m
\e[1munset/anntalk \e[22mStop talk like announce messages on your terminal
unset/anntalk
-
-
you will suppress several of these announces, you may miss the odd
useful one as well, but you would probably miss them anyway in the
welter of useless ones.
allows you to see them again. This is the default.
- \e[1m12.124. unset/beep\e[0m
+ \e[1m12.126. unset/beep\e[0m
\e[1munset/beep \e[22mStop beeps for DX and other messages on your terminal
- \e[1m12.125. unset/dx\e[0m
+ \e[1m12.127. unset/dx\e[0m
\e[1munset/dx \e[22mStop DX messages coming out on your terminal
- \e[1m12.126. unset/dxcq\e[0m
+ \e[1m12.128. unset/dxcq\e[0m
\e[1munset/dxcq \e[22mStop CQ Zones on the end of DX announcements
Do a STAT/USER to see which flags you have set if you are confused.
- \e[1m12.127. unset/dxgrid\e[0m
+ \e[1m12.129. unset/dxgrid\e[0m
\e[1munset/dxgrid \e[22mStop QRA Grid Squares on the end of DX announcements
Do a STAT/USER to see which flags you have set if you are confused.
- \e[1m12.128. unset/dxitu\e[0m
+ \e[1m12.130. unset/dxitu\e[0m
\e[1munset/dxitu \e[22mStop ITU Zones on the end of DX announcements
Do a STAT/USER to see which flags you have set if you are confused.
- \e[1m12.129. unset/echo\e[0m
+ \e[1m12.131. unset/echo\e[0m
\e[1munset/echo \e[22mStop the cluster echoing your input
YOU DO NOT NEED TO USE THIS COMMAND IF YOU ARE CONNECTED VIA AX25.
- \e[1m12.130. unset/email\e[0m
+ \e[1m12.132. unset/email\e[0m
\e[1munset/email \e[22mStop personal msgs being forwarded by email
You can disable forwarding by:-
+
+
UNSET/EMAIL
- \e[1m12.131. unset/here\e[0m
+ \e[1m12.133. unset/here\e[0m
\e[1munset/here \e[22mTell the system you are absent from your terminal
- \e[1m12.132. unset/logininfo\e[0m
+ \e[1m12.134. unset/logininfo\e[0m
\e[1munset/logininfo \e[22mInform when a station logs out locally
- \e[1m12.133. unset/privilege\e[0m
+ \e[1m12.135. unset/privilege\e[0m
\e[1munset/privilege \e[22mRemove any privilege for this session
use. If you want to get your normal privilege back you will need to
either logout and login again (if you are on a console) or use the
SYSOP command.
-
- \e[1m12.134. unset/prompt\e[0m
+ \e[1m12.136. unset/prompt\e[0m
\e[1munset/prompt \e[22mSet your prompt back to default
UNSET/PROMPT will undo the SET/PROMPT command and set you prompt back
to normal.
- \e[1m12.135. unset/talk\e[0m
+ \e[1m12.137. unset/talk\e[0m
\e[1munset/talk \e[22mStop TALK messages coming out on your terminal
- \e[1m12.136. unset/usstate\e[0m
+ \e[1m12.138. unset/usstate\e[0m
\e[1munset/usstate \e[22mStop US State info on the end of DX announcements
and the spotted's State will appear on the LHS of the time field. Any
information found will override any locator information from
SET/DXGRID.
+
Some user programs cannot cope with this. You can use this command to
reset (or set) this feature.
Do a STAT/USER to see which flags you have set if you are confused.
- \e[1m12.137. unset/wcy\e[0m
+ \e[1m12.139. unset/wcy\e[0m
\e[1munset/wcy \e[22mStop WCY messages coming out on your terminal
- \e[1m12.138. unset/wwv\e[0m
+ \e[1m12.140. unset/wwv\e[0m
\e[1munset/wwv \e[22mStop WWV messages coming out on your terminal
- \e[1m12.139. unset/wx\e[0m
+ \e[1m12.141. unset/wx\e[0m
\e[1munset/wx \e[22mStop WX messages coming out on your terminal
- \e[1m12.140. who\e[0m
+ \e[1m12.142. who\e[0m
\e[1mwho \e[22mShow who is physically connected
This is a quick listing that shows which callsigns are connected and
what sort of connection they have
- \e[1m12.141. wx <text>\e[0m
+ \e[1m12.143. wx <text>\e[0m
\e[1mwx <text> \e[22mSend a weather message to local users
- \e[1m12.142. wx full <text>\e[0m
+ \e[1m12.144. wx full <text>\e[0m
\e[1mwx full <text> \e[22mSend a weather message to all cluster users
projects / spider.git / commitdiff