force removal of ssid on badspotter
[spider.git] / Changes
1 23Mar05=======================================================================
2 1. fix (un)set/badspotter so that it only stores non-ssid calls.
3 2. mention action on talk and ann/full in help.
4 22Mar05=======================================================================
5 1. Fix ? so it works again.
6 2. Fix Aliases for sh/c so they are correct
7 3. Fix sh/connect for AGW ports and other niffnaffs.
8 22Mar05=======================================================================
9 1. fixed sh/c/node sh/c/a and sh/newc/n.
10 21Mar05=======================================================================
11 1. log AGW port on connection
12 2. merge in latest (2Mar2005) cty.dat 
13 3. fix command searching so it does not pick up false positives for commands
14 with / in them in directories that don't have that.
15 4. Important security change.
16 5. add missing input filter for WWV
17 16Mar05=======================================================================
18 1. make the correct correction to the DL entry in wpxloc.raw (left out the
19 'N' of 'North' in the latitude).
20 2. Severely reduce the dupes caused by some of the badly configured / written
21 spot suckers out there. 
22 13Mar05=======================================================================
23 1. There has been a mix up in the Aranea1 branch. I have managed to merge a
24 change that I have been meaning to do for ages. I have now made that change
25 here.
26 27Feb05=======================================================================
27 1. fix duping on bad spot suckers that copy the prefix that is put at the end
28 of the comment section by AR-C nodes becoming the whole comment. 
29 26Feb05=======================================================================
30 1. Added show/grayline command from Steve K9AN. This is also aliased to
31 show/greyline :-)
32 2. fix spot dupe ambiguity on spotter having an SSID (remove it).
33 25Feb05=======================================================================
34 1. Changed the way spot deduping is done. This is likely to make deduping much
35 stricter. In essence a person cannot spot the same call on the same frequency
36 more than once an hour (configurable) unless he makes a (non-duped) comment
37 as well. 
38 2. Added Swains Island
39 3. Added TO4G for Glorioso 
40 19Feb05=======================================================================
41 1. changed ssb allocation on 40m to add missing 5Khz.
42 2. Change sh/425 to Leo, IZ5FSA's requirements.
43 08Feb05=======================================================================
44 1. possibly fixed the multiple condition problems on sh/dx
45 2. added some FAQs.
46 05Feb05=======================================================================
47 1. Fix a long standing (ie since the first bulletin was sent) bug with old
48 mail not being deleted until a restart was done.
49 2. As well as a duplicate check on existing bulletins, I have added a check 
50 the message is not (already) too old. 
51 3. fix problem for perl < 5.6 in Thingy.pm 
52 03Feb05=======================================================================
53 1. Added latest Spanish translations courtesy of Angel EA7WA.
54 2. Force all languages to use pr in en in Messages, as the prompt is
55 the same for all.
56 19Jan05=======================================================================
57 1. More Spanish changes by Angel, EA7WA.
58 2. add language dependant motd files. You can now have motd_{lang} and 
59 motd_nor_{lang} (eg for Spanish: motd_es and motd_nor_es) for normal and
60 non-registered (if you use registration) users respectively. Based on an idea
61 from Angel, EA7WA.
62 18Jan05=======================================================================
63 1. Added missing Spanish translation courtesy of Angel EA7WA.
64 2. Really incorporate latest cty.dat (11Dec04) as opposed to merely thinking 
65 I had (and still add 3X0Y as well).
66 3. fix ? all in non english language
67 4. Alias sh/st and sh/sta back to show/station from show/startup.
68 17Jan05=======================================================================
69 1. Added 3Y0X to Peter Island 3Y in cty.dat.
70 16Jan05=======================================================================
71 1. Added the changes to Canadian Prefixes so that usdbraw.gz from Charlie
72 K1XX's website (http://dxc.k1xx.com/download) dated after 1Jan05 will include
73 Canadian city and province data as well the existing US data.
74 2. Improve the apropos command to take better account of language and do
75 a better job of only showing english stuff for commands where there really is
76 no local language version.
77 15Jan05=======================================================================
78 1. knocked over a few possible ways of people annoying other people thru
79 the use of scripts
80 2. Fixed problem in DXCommandmode with an indirect call that did not work
81 in perl < 5.8.0.
82 3. Add Spanish translations of new scripting commands in help, from Angel 
83 EA7WA. 
84 13Jan05=======================================================================
85 1. Fixed prompting in languages other than English.
86 2. Fixed language problem with spoof, but that simply hides a whole can of
87 worms that I shall have to address later.
88 3. Added make clean to src Makefile (!!!)
89 12Jan05=======================================================================
90 1. Add $main::bumpexisting variable which allows a new connection for a user
91 call to disconnect an existing connection with the same call. The default for
92 this variable is 'true' (1). This means that existing behaviour has changed.
93 set/var $main::bumpexisting = 0 to return to original behaviour.
94 2. Remind a user every hour (as default) that they have new messages.
95 set/var $DXCommandmode::msgpolltime = 3*3600 to set it to 3 hours.
96 3. Allow some substitutions in set/prompt (call, date, time and
97 cluster call) and add dxspider just before the > as standard. 
98 4. Add $main::allowdxby variable so that sysops can switch off the 
99 'DX BY <othercall' command. It is set to 0 (ie disabled) by default. This
100 is for sysops who don't want to bump privilege to allow it. That still works
101 as before.
102 5. Fix the bug in 'dx by <call>' that causes only the first word of the 
103 comment to be recorded.
104 6. Fix bug counting backwards over a leap year in Julian.pm which meant that
105 sh/dxstats doesn't start at 'yesterday' anymore.
106 7. Added set/startup and show/startup commands to allow users and sysops
107 to create and display startup scripts. There is also an unset/startup to
108 remove a script.
109 27Dec04=======================================================================
110 1. add improved VE data from Charlie K1XX. You should update usdb as well.
111 22Dec04=======================================================================
112 1. Changed all the names of US prefixes to be prepended with their State code.
113 thus "Alaska-KL7" becomes "AK-Alaska-KL7". 
114 21Dec04=======================================================================
115 1. added AGW port no after an example by IW5DEZ.
116 2. modified links command to suggestions by Charlie K1XX.
117 3. added show/groups command to show recently used chat groups by Tommy 
118 SM3OSM.
119 4. fixed T8 / V6 ambiguity (at least basically).
120 20Dec04=======================================================================
121 1. updated create_prefix.pl to only use (supplied) wpxloc.raw and cty.dat
122 2. Added IG9, GM/S, 4U1V and some other detail changes to make it compatible
123 with cty.dat.
124 3. regenerated prefix_data.pl with updated wpxloc.raw and cty.dat 11Dec04.
125 17Dec04=======================================================================
126 1. add undocumented special command for VE7CC.
127 10Dec04=======================================================================
128 1. Included fixes sent in by David, N9KT for the new DB0SDX site.
129 2. removed redundant "rm *bys" and "rm *cys" from Spot::init().
130 09Dec04=======================================================================
131 1. fix show/mydx properly this time (and test the fix!)
132 2. fix the default in show/qrz
133 06Dec04=======================================================================
134 1. fix show/mydx if there is no defined spotfilter
135 07Oct04=======================================================================
136 1. added the ability for people to import chat from external programs.
137 create a directory called /spider/chat_import, make sure it is writable
138 by any applications that might dump stuff in there (chmod 1777 
139 /spider/chat_import on *nux). Put a file with a sensible name in there;
140 the first part of the name will be the chat group to whom the message will
141 be sent. So solar.txt.12325 = SOLAR. Announces can also be sent to local, all
142 and sysop (ie files whose name begins with those names). Each line in the
143 file becomes a chat line or an announce. See importwwv.pl for an example.
144 DO NOT USE importwwv.pl, I am already using it and if you do as well, people
145 will get duplicates which will ANNOY THEM!!! It is just an example.
146 23Aug04=======================================================================
147 1. add the start of an alternative routing engine (RouteDB)
148 20Aug04=======================================================================
149 1. Added new protocol specification to techdoc
150 17Aug04=======================================================================
151 1. change 'fo' alias in Aliases 
152 31Jul04=======================================================================
153 1. add a load of .cvsignore lines to reduce the updating noise
154 30Jul04=======================================================================
155 1. make sure that // is not converted to / in command lines.
156 28Jul04=======================================================================
157 1. backported 'Investigate' from NP branch so that only pingable nodes
158 are 'believed'.
159 2. added missing entries in Internet.pm for sh/contest
160 26Jul04=======================================================================
161 1. added extra variables to Internet.pm to allow the various internet query
162 commands to alter the url that they use. 
163 2. Added show/425 command from Leo, IZ5FSA.
164 05Jul04=======================================================================
165 1. fix rspfcheck on pc27
166 23Jun04=======================================================================
167 1. Add zone, by_zone, itu, by_itu, state and by_state searches to sh/dx
168 2. Update manuals for CVS and new commands
169 22Jun04=======================================================================
170 1. Add the show/mydx command which *may* filter your spots using your
171 spot filter.
172 17Jun04=======================================================================
173 1. alter processing of PC17 to see if they get distributed more than now.
174 14Jun04=======================================================================
175 1. fix previous fix of sh/dx
176 09Jan04=======================================================================
177 1. removed PC90 which was breaking various filtering things.
178 2. added realtime spot formats to sh/dx (at least in basic form), this is
179 activated by using either of the keywords 'real' of 'rt' on the command
180 line. Also added sh/fdx as an alias.
181 01Jan04=======================================================================
182 1. move position of USDB init to get rid of an obscure bug pointed out by
183 Charlie K1XX.
184 2. Remove redundant documentation
185 31Dec03=======================================================================
186 1. alter remote database handling to 'new standard'.
187 30Dec03=======================================================================
188 1. updated website to make it clear(er) that it all works under Windows (like
189 wot Charlie said...).
190 2. made the changes to the German Messages that Thomas DL3SBB sent me a 
191 loooong time ago.
192 3. made 'dx by' require at least privilege 1.
193 29Dec03=======================================================================
194 1. updated dxoldtonew.pl so that it takes an AK1A DX.DAT file (argument on
195 command line or a default of /spider/data/DX.DAT and outputs the standard
196 DXSpider format spot files. Please be warned that if any of these files 
197 already exist, the data will be appended onto the end of the file. Please
198 make sure you have backups or at least be aware that this may give strange
199 results which may be 'out of order'.
200 24May03=======================================================================
201 1. Added more french translations from Robert (HB9BZA) and we now have some
202 french help as well (also from Robert). A splendid effort. Thank you.
203 16May03=======================================================================
204 1. Correct Windows section of the Addendum file! (g0vgs)
205 06May03=======================================================================
206 1. Add Portuguese language courtesy of David CT1DRB (set/lang pt)
207 2. Add French language courtesy of Robert HB9BZA (set/lang fr)
208 02Apr03=======================================================================
209 1. Fix some minor problems with the manuals (g0vgs)
210 01Apr03=======================================================================
211 1. Update filtering primer, changes by N3RD (g0vgs)
212 28Mar03=======================================================================
213 1. Added an excellent document on filtering to the manuals from Jim, W3BG
214 2. started to remove old documents (g0vgs)
215 27Mar03=======================================================================
216 1. play around with sh/reg, sh/iso, sh/node and sh/lock to make them work
217 slightly better with the new user format.
218 2. update manuals (g0vgs)
219 26Mar03=======================================================================
220 1. add some ak1a compatibility changes to chat
221 2. added help text for chat, join, leave and sh/chat.
222 18Mar03=======================================================================
223 1. minor corrections to manuals (g0vgs)
224 17Mar03=======================================================================
225 1. changed the regex determining what is a callsign to be more comprehensive.
226 I would suggest re-running create_qsl.pl and then restarting.
227 2. Fix chat so that output appears to users again and PC sentence conforms
228 to standard. Add kludge to remove rewritten chats if I see them.
229 3. Only send chat PCs to spider or AK1A boxes
230 12Mar03=======================================================================
231 1. added HC and QRZ.com to possible QSL locations, if you want to pick up
232 historical info (ie start again), run create_qsl.pl after update and restart
233 the node (which you will need to do anyway).
234 2. changed the dbcreate command so that you can say: 
235    dbcreate dxqsl cmd show/dxqsl
236 which will allow local and remote users to execute commands as though they
237 are Databases. You can also include these databases in chains. What you do
238 with this, is ofcourse a moot question.   
239 3. Update manuals (g0vgs)
240 11Mar03=======================================================================
241 1. Changed the name of show/qsl to show/dxqsl.
242 2. Alter Commands_en.hlp to match new name and issue manual updates (g0vgs)
243 10Mar03=======================================================================
244 1. added show/qsl command. This command basically takes the normal output of
245 sh/dx qsl and stores it in a database. In order to enable this command you 
246 will require the Storable module to be loaded (you will already have done
247 this with a bit of luck for the new DXUser interface). The suggested 
248 procedure is (after the update) to run /spider/perl/create_qsl.pl (this may
249 take a long time), then immediately it finishes, restart the node. The node 
250 will then keep the database up to date automatically. If you are not 
251 interested in historical data then you can leave this step out.
252 2. added show/contest command from Tommy SM3OSM via Rene OZ1LQH.
253 08Mar03=======================================================================
254 1. Added chat, join, leave commands to allow general purpose conferencing
255 on arbitrary subjects. [Translators: added e34,e35,join,leave]. There is
256 currently no help. There is also sh/chat.
257 28Feb03=======================================================================
258 1. Charlie K1XX fixed the sh/iso, sh/reg and sh/node commands
259 25Feb03=======================================================================
260 1. backported switch processing for PC sentences
261 24Feb03=======================================================================
262 1. add the 'run' command and the 'privilege' command to allow sysops to 
263 create scripts for people.
264 2. fix show/user so that it doesn't moan about uninitialised variables
265 23Feb03=======================================================================
266 1. Added show/wm7d command (a US only callbook server) [by K1XX].
267 2. Added a prototype show/db0sdx command (w.i.p).
268 3. Added set/dxcq and set/dxitu zone commands [Translators: I have added
269 dxcqu, dxcqs, dxitus and dxituu to Messages].
270 4. Add new Commands to manuals (g0vgs)
271 5. make sure that none of the above set/dx... commands are defaulted on
272 22Feb03=======================================================================
273 1. changed qrz.com address 
274 2. added Charlie's [K1XX] new wpxloc.raw data stuff to get WA1, KC3 type 
275 callsigns to work better.
276 3. added in set/usstate command which prints any US state information 
277 available on both the spotted (LHS of time) and spotter (RHS of time).
278 [Translators: I have added usstates and usstateu to Messages].
279 4. Merged in the new (faster) DXUser.pm.
280
281 [NOTE] this version will require Storable to be installed. On the
282 other hand the code may work without, in a compatible way. This bit hasn't 
283 been very well tested (the 'no Storable' condition that is). 
284
285 [*** NOTE ***] make sure that you do an 'export_user' BEFORE restarting
286 you node. (Yes I know this is like a shrinkwrap licence, but I can't
287 help it).
288
289 It will take several minutes for the node to restart when it does the 
290 conversion from .v2 to .v3 user file. Please go and have a good strong cup
291 of tea whilst this is happening.
292
293 If it fails then you will need to edit your latest user_asc file on (or about)
294 line 25 it says: $ref = decode($f[1]); you will need to change that to 
295 $ref = asc_decode($f[1]); and then do: perl user_asc
296  
297 DO MAKE SURE THAT you include subdirectories in your CVS update 
298
299 21Feb03=======================================================================
300 1. moved the export of the users file to Wednesday night (GMT) to avoid 
301 possible crashes and/or delays during a contest weekend.
302 14Feb03=======================================================================
303 1. some major changes to the structure of the manual documentation.  To bring
304 the manuals into line, they now have the language tag (like 
305 installation_en.html).  Hopefully someone will translate the manuals 
306 eventually :-) I have left the old files in CVS for now to allow
307 everyone to change any symlinks etc to the new filenames.  I will remove the
308 old files shortly, please update your links! (g0vgs)
309 2. docs makefile updated and commands2sgml.pl added from M0AZM.  This script
310 inserts the helpfiles automagically from Commands_en.hlp into the relevant
311 manuals. (g0vgs)
312 3. Commands_en.hlp adjusted slightly to ensure at least one space before
313 examples for the purposes of the above script. (g0vgs)
314 4. Amend index.html to the right document names. (g0vgs)
315 09Feb03=======================================================================
316 1. Correct some typos in the manuals and update perl modules etc.  Also
317 amend some help files to show correct syntax, around the 'clear' commands
318 swapping [input] and <callsign> in each case, translators please take note.
319 Thanks to Dave N3RD for info. (g0vgs)
320 2. update the addendum for latest build and include information on additional
321 modules required. (g0vgs)
322 20Jan03=======================================================================
323 1. changed sh/c so that, by default, it only shows the caller's country nodes
324 sh/c all will show the old style full list. "sh/c sk gb" will show the config
325 of all the GB and SK nodes.
326 2. changed sh/stat and sh/route for nodes
327 19Jan03=======================================================================
328 1. I have made a fundemental change to the way PC19s are dealt with as a 
329 result of the discussions on the mailing list. From now on, only nodes that
330 issue PC16s will have PC19s propagated. If they *ever* issue a PC16 then from
331 then on they are considered as being 'connected' and thus routable. No PC16
332 and you have no route. This should stop all passive links being routed. For
333 the few cases where you know that that is a very small node and it rarely has
334 users, then you can do a set/routepc19 <node> to enable PC19 propagation. In
335 the even more rare case of you wanting to prevent PC19s being routed thru 
336 your node, you can use unset/routepc19. THIS IS NOT A SUBSTITUTE FOR ROUTE
337 FILTERING!!!!! [translators: I have added wpc16s, wpc16u, wpc19s, wpc19u]
338
339 BTW the first time you connect again you will notice a separate PC19 go out
340 for each 'new' PC16 that the node sees. This is normal and will go away the
341 second time the system needs to issue a PC19.
342 2. Alter the export_user command to remove users that have no useful info
343 and have not been seen for more than (default) 1 year.
344 3. fix the problem of users on more than one node not being propagated
345 4. remove spaces and all non-US ascii characters from PC41 for the dup check.
346 5. put in check to see if the parent of a newly allowed PC19 is still there
347 (this needs further investigation).
348 17Jan03=======================================================================
349 1. Fix problem with lines being left in the main input queue for a 
350 disconnected/ing node.
351 14Jan03=======================================================================
352 1. Tidy up AUTOLOAD functions
353 2. Make sure that empty PC16s are not sent on startup to a node.
354 12Jan03=======================================================================
355 1. add Czech language courtesy of Milan OK1XH
356 06Jan03=======================================================================
357 1. add the latest changes to the spider-web java interface from Rene, OZ1LQH.
358 Please note that there is a change to the spider.cgi file this time so that
359 the client show 'Connected to Node_Call' instead of the hostname.  You will
360 need to update your cgi file when you update the changes.  Please make sure
361 that you back up your old files first! (g0vgs)
362 2. yet more changes to the java client from Rene :-)  Also added a makefile
363 and a Changes file for the client in the spider-web directory.
364 05Jan03=======================================================================
365 1. fix some irritating messages caused by protocol loops in sh/c
366 2. update copyright
367 3. move GN from GJ to GI
368 31Dec02=======================================================================
369 1. Update files in the java client with fixes and additions from Rene, OZ1LQH
370 05Dec02=======================================================================
371 1. Fix SSID issues with AGWMsg.
372 2. updated show/hftable, vhftable, hfstats, vhfstats and dxstats after K1XX
373 sent in some sample code indicated new functionality he requires. Translators
374 please note that the stat* messages have been changed and e33 added. I have 
375 also added quite a bit of extra examples and things to the relevant HELP
376 texts. It is now possible to search from any date for up to 365 days of data.
377 You can get the information by prefix or by callsign or for ALL spots. 
378 04Dec02=======================================================================
379 1. updated sh/log to allow searching for more arbitrary strings such as IP
380 addresses
381 08Nov02=======================================================================
382 1. update Keps.pm to reflect which satellites now come round in the weekly
383 updates. I suggest that you copy this file to /spider/local and do a load/kep
384 and you should lose all the 'old' satellites (eg MIR).
385 08Nov02=======================================================================
386 1. made some small mods to grepdbg and spot2csv.pl
387 2. fix a possible DOS in dx command
388 07Nov02=======================================================================
389 1. allow three digit longitudes
390 2. make a small change to see if messages now stay in place.
391 3. make keep actually stick over a reboot and take it fully into account for
392 deletions (translators: I added m18).
393 4. try not to delete new messages (even if this is an update that reads 'old'
394 messages with missing fields).
395 29Oct02=======================================================================
396 1. make sh/log et al a bit more efficient.
397 2. fix dupe message in dx.
398 3. update cty.dat to the latest, add k8T, K8O to KH8 and TX5BTY to FO/A
399 4. clear cache on reload of prefixes
400 25Oct02=======================================================================
401 1. remove the dupefile automatically if it becomes corrupted
402 2. instrument the startup slightly more
403 21Oct02=======================================================================
404 1. Fix msg aging.
405 2. make the default pinginterval and obscount variable (set/var 
406 $DXProt::pingint and $DXProt::obscount) 
407 20Oct02=======================================================================
408 1. remove dupe check on local sysop announces
409 2. fix format errors on sh/muf for 5.8.0
410 3. add new version of the administration manual that includes WinCVS with
411 thanks to K1XX (g0vgs).
412 17Oct02=======================================================================
413 1. added new Spanish files for help and Messages from Angel, EA7WA.
414 16Oct02=======================================================================
415 1. decrease the default max length of PC16/19 to around 180 characters to be
416 slightly friendlier to ARC, which seems to have a difficulty reconstructing
417 lines from multiple packets. Also make the value settable via set/var.
418 2. strip off blank spaces from the ends of lines of  command output.
419 15Oct02=======================================================================
420 1. made some detail changes to the raw USDB data and the routines that 
421 generate and operate on them. There were some bugs involving a few 'missing'
422 callsigns which been fixed. Also there were some, for our purposes, invalid
423 callsigns in the database which have been removed (down to about 820,000 
424 entries now). You should really update your database. 
425
426 The latest code now (conditionally; ie if you have it loaded it will use it)
427 support Compress::Zlib on both *nux and Windows. The suggested procedure 
428 is this:-
429
430 1. Download the corrected database from
431    http://www.dxcluster.org/download/usdbraw.gz to somewhere like /tmp.
432 2. update from CVS.
433 3. Restart (on linux, just stop the node and *don't* restart on Windows).
434 4. remove /spider/data/usdb.v1
435 5. cd /spider/perl
436 6. (perl) create_usdb.pl /tmp/usdbraw.gz (or wherever you put it)
437 6a. If you don't have Compress::Zlib loaded then you will need to gunzip
438     it manually and do: create_usdb.pl /tmp/usdbraw (not Windows :-)
439 7. on linux, in a console window do: load/usdb, on windows: restart the node. 
440 --
441 2. Added set/usdb command to add adding or changing of a callsign in the USDB
442 3. Stop dupe spots from the same spotter (with or without comment corruption)
443 14Oct02=======================================================================
444 1. added show/usdb command as a simple, direct interface to the information
445 available in the USDB stuff.
446 13Oct02=======================================================================
447 1. A large change has occurred. There is now some (optional) US state recog-
448 nition. This is in its early stages but appears to work for me. You will need
449 to :-
450
451 1. download the database at http://www.dxcluster.org/download/usdbraw.gz 
452 2. save it somewhere (/tmp, anywhere).
453 3. Decompress it using your favorite program (gunzip / winzip) [call it
454    usdbraw if winzip]{BE WARNED, some browsers may decompress it on the
455    fly for you, you can tell; if it is 5Mb it is compressed - 16Mb not}.
456 4. remove any /spider/data/user.v1 files lying around (at least for this
457    first time.
458 5. cd /spider/perl
459 6. perl create_usdb.pl /tmp/usdbraw  (ie the UNCOMPRESSED file)
460 7. Wait, I suggest some cups of tea are in order.
461 8. Wait a bit more.
462
463 You don't need Compress::Zlib anymore, I assumed it was universal.
464
465 You will be able do this while the node is running somewhen. There is a 
466 planned method of keeping the US DB up to date with smaller (ie < 15Mb) patch
467 files once a week but you will have to wait a bit for the code to bed down 
468 first. You can filter on routes, spots and announces using 'call_state' or
469 'by_state' and a comma separated list of state codes. The HELP has been 
470 updated (which may help...). 
471
472 Once you have run the create_usdb.pl you will need to restart.
473
474 If you don't need this, then don't run create_usdb.pl it will simply be
475 a waste of time. The run-time version is 30Mb and has 840,000 odd entries
476 in it. This does not replace or supplant sh/qrz (sorry Charlie [who put me
477 up to this]). 
478
479 2. There are a number of other niff-naff changes which I hope will improve
480 rather than hinder your user experience (including check forward as well as
481 back for those speedy clocked dupes mentioned below).  
482 12Oct02=======================================================================
483 1. attempt to improve the "check back for 5 minutes to see if this spot is 
484 the same as a previous one but for the time spotted" dupe check.
485 2. improve the sh/vhftable and sh/hftable commands to allow you to enquire
486 by dxcc country (using the relevant prefixes or dxcc country numbers).
487 [note to translators, I have changed the help text and Messages tags for
488 stat*].
489 07Oct02=======================================================================
490 1. fix problem with (invalid) callsigns starting with '0' (zero) eg 0f6ira.
491 03Oct02=======================================================================
492 1. only sysop (priv=5+) can now send to distro SYSOP, ordinary users will have 
493 their message routed to the $main::myalias callsign as a private message. 
494 29Sep02=======================================================================
495 1. Added LRU caching to DXUsers and Prefix.
496 2. make Timer::handler only search its chain once a second seeing as that
497 is the minimum granularity available.
498 3. add some separation between cfg file making, data generation and mrtg 
499 running. See /spider/cmd/mrtg.pl for some instructions...
500 4. Added data in and out to the MRTG stats, you need to do an indexmaker
501 to get them onto the index page, I have also added some colour to the
502 legend to make what is being displayed a bit more obvious.
503
504 See http://gb7djk.dxcluster.org/mrtg/stats.html for an example of the
505 default screen.
506
507 28Sep02=======================================================================
508 1. Put some transparent caching into Prefix.pm to see if this has a 
509 performance impact.
510 2. Fix doing a new log open for every log file write.
511 26Sep02=======================================================================
512 1. added WWV and WCY to the Mrtg stats. Don't forget to do an indexmaker!
513 25Sep02=======================================================================
514 1. added mrtg stuff to the system as a template. In order to use this you
515 must install mrtg onto your system and copy all the mrtg files (or at least
516 all the images) to new directory /spider/html/mrtg. The system generates the
517 config file for you as part of its workings. To get it to update add a line
518 to your spider crontab like: 
519
520 00,05,10,15,20,25,30,35,40,45,50,55 * * * * run_cmd('mrtg all')
521
522 You will also need to do an indexmaker once in the html directory. I put the 
523 index page into /spider/html/mrtg/stats.html YMMV. I do:
524
525 indexmaker --output stats.html --columns=1 --title "MRTG statistics for 
526 GB7DJK" ../../mrtg/mrtg.cfg
527
528 But all on one line.
529 2. I have made a technical change to the way ax25 connects outward on unix 
530 boxes are done. I currently have no way of testing this. I think it still 
531 works.
532 22Sep02=======================================================================
533 1. Add changes to the installation manual for Windows users from K1XX
534 21Sep02=======================================================================
535 1. make some detail changes for connects out in Msg.pm
536 17Sep02=======================================================================
537 1. Added shu command for Charlie's (K1XX) benefit (together with the rest of
538 our butterfingered sysops) who miss the '/' out of sh/u frequently enough 
539 to curse. 'shu' simply types out a message saying 'type SHUT' to shutdown the
540 node. Added 'shu' to /spider/perl/Messages. No need to restart, just 
541 load/mess and load/alias after doing a CVS.
542 21Aug02=======================================================================
543 1. added 'warc' and 'contesthf' to the regions in bands.pl (K1XX).
544 20Aug02=======================================================================
545 1. fix lines containing just the character '0' in messages (and console.pl)
546 (K1XX).
547 2. remove all newline characters from AGW data, thus treating it like a 
548 'normal' ax25 connection where the 'newline' convention is just carriage
549 return (K1XX)
550 06Aug02=======================================================================
551 1. added 5.5Mhz band as '60m'.
552 29Jul02=======================================================================
553 1. Changed max R value in wcy to 500 from 300.
554 2. Got rid of warnings on startup using 5.8.0 
555 28Jul02=======================================================================
556 1. stick the invalid key deletes in an eval loop in export_user
557 18Jul02=======================================================================
558 1. Make additions and changes to manuals. (g0vgs)
559 16Jul02=======================================================================
560 1. Add changes to the spider-web java web client.  Thanks to Rene, OZ1LQH.  It
561 should now be easier to install and run for all systems. (g0vgs)
562 11Jul02=======================================================================
563 1. NP work has now started in ernest ([ed]who he?). You will need to download
564 Digest::SHA1 and any dependant packages to run this release. HOWEVER tempted
565 you are, please don't set/newprotocol on any nodes. It won't work.
566 http://www.cpan.org/modules/by-module/Digest/Digest-SHA1-2.01.tar.gz
567 2. Make the cluster node registered on from startup (from Mark HB9DBM).
568 3. Make the 'export_users' process *MUCH* more robust. It should now accept
569 funny characters and not rely on an absolutely 'perfect' user file to work.
570 Errors are displayed (and logged if done from the cluster) and then ignored.
571 Invalid callsigns are removed. 
572 09Jul02=======================================================================
573 1. make the is_qra more accurate (from Mark HB9DBM).
574 04Jul02=======================================================================
575 1. added another fix to Prefix.pm so that it resolves Japan callsigns again
576 also you can 'set/debug prefix' to see what it is trying to do.
577 03Jul02=======================================================================
578 1. Added the DEMONSTRATE command which allows a sysop to demonstrate a 
579 command to a user (from a request by Charlie K1XX). 
580 2. added message e31 (xxxx is not a user)
581 02Jul02=======================================================================
582 1. Fixed the problem with badspotter or badnode being set to baddx if either
583 of the data files are missing. 
584 25Jun02=======================================================================
585 1. as predicted there was an error in the Prefix routine, I have improved it.
586 24Jun02=======================================================================
587 1. make set/badspotter non SSID sensitive. Set/badnode is left to be SSID
588 sensitive. 
589 2. added 3XA(=3X) and K1B(=KH1) also changed the logic of sh/prefix. This
590 may break things, please test it. 
591 19Jun02=======================================================================
592 1. make set/badspotter and set/badnode apply to announces and talks as well
593 as spots. 
594 12Jun02=======================================================================
595 1. fixed (un)set/wwv and (un)set/wcy so they don't issue spurious messages.
596 Thanks Rene (oz1lqh)
597 07Jun02=======================================================================
598 1. fix messages in DXDb.pm to point to the correct ones. Thanks Rene (oz1lqh)
599 2. add missing wcys and wcyu messages to Messages. Thanks Rene (again)
600 3. upissue version number to 1.50 (finally)
601 16Apr02=======================================================================
602 1. allow the rest of PC19 to continue if it contains a reference to a locally
603 connected node. Thank you Tommy SM3OSM.
604 19Mar02=======================================================================
605 1. fix problems with ephemeral dup checking on PC16,17,19,21
606 2. perturb the problem with national character sets.
607 15Mar02=======================================================================
608 1. add help for 'accept' and 'reject'. (g0vgs)
609 2. adjustments to the manuals (g0vgs)
610 3. make changes to reflect the correct output of sh/sun and sh/moon based
611 on information from Steve, K9AN. (g0vgs)
612 23Feb02=======================================================================
613 1. remove old satellites from keps.
614 2. Add information on setting up the ax25 utils to the installation manual
615 (g0vgs)
616 19Feb02=======================================================================
617 1. move the PC11 dup check after the input filter
618 06Feb02=======================================================================
619 1. changes to manuals to (hopefully) improve documentation and alter my email
620 address (g0vgs)
621 02Feb02=======================================================================
622 1. changed sh/qrz to the latest incarnation of the command at qrz.com.
623 29Jan02=======================================================================
624 1. add VP8GEO to South Georgia
625 27Jan02=======================================================================
626 1. make save work in cron context
627 2. try to get the C client to handle closes on its standard input better
628 3. put some validation in cluster.pl to check that people have set it up 
629 handled.
630 4. fix the long callsign checking
631 22Jan02=======================================================================
632 1. limit spot dupe checking to first 12 characters
633 13Jan02=======================================================================
634 1. changed the backstop termination alarm routing in the C client so that
635 it flushes the input and output buffer and then commits suicide.
636 12Jan02=======================================================================
637 1. put setsockopts into eval block to allow some of them to fail
638 11Jan02=======================================================================
639 1. Make M$ TCP connx blocking again, sigh...
640 2. backed out ALL the M$ speedup and make nicer changes :-(
641 3. cope with data coming in during the disconnection process. Don't worry
642 Earth people, this will take no longer than 15 of your Earth seconds...
643 10Jan02=======================================================================
644 1. set SO_LINGER = 0 to try to prevent the system sending data on a closing
645 socket. This MAY help some of the hanging problems (but I am now beginning
646 to doubt this).
647 2. do the same on the C client (which means DON'T FORGET to make it).
648 3. set no nagling on the output from the node.
649 4. set KEEPALIVE on TCP connections for both the node and C Client (you will
650 have to make the C client again) and you will need to restart.
651 5. It appears that it IS possible to set non blocking on M$ you just need to
652 know how.
653 6. Fix problem with load/cmd_cache core dumping the system
654 08Jan02=======================================================================
655 1. altered sh/qrz to point to the new server
656 2. alter the character set handling a bit to make it better for spanish
657 06Jan02=======================================================================
658 1. fix leading space removal from messages input from the keyboard
659 2. make some mods to allow perl 5.7.2 to run
660 3. create $DXProt::eph_restime to allow variable slugging of ephemeral dups
661 4. create $DXProt::eph_info_restime to allow a long dupe time for these
662 5. create $DXProt::eph_pc34 to allow a short anti dupe slug for rcmd loops
663 6. Add a new sysop cmd 'save' which will save the output of any command (or
664 list of commands in "<cmd>") to a file.
665 7. Add a new command "echo" which echos its argument to the screen (useful
666 for titling in the save command above.
667 8. Increase interval between logins causing for/opernam to 60 days (from 30)
668 + a random factor between 0 and 9.
669 9. Added Italian translation of Messages from Luca IT9ROT (thank you 
670 very much).
671 10. Added the /<cmd> feature (as in talk) to execute a cmd whilst typing a 
672 message, then enhanced it so that if you do //sh/dx (for instance) it will
673 put the result into the message (as well as show it to you).
674 11. Added the // feature to talk as well. 
675 02Jan02=======================================================================
676 1. updated the copyright dates
677 2. modernised and extended the Windows instructions a bit.
678 3. added a TODO file which is the list of things that I need to do. Please
679 badger me to put YOUR enhancement on this list. It will then get done.
680 31Dec01=======================================================================
681 1. Make a couple of changes to the Installation Manual and add a FAQ on msg
682 deletion. (g0vgs)
683 2. Fix unset/register so it works (g0vgs)
684 30Dec01=======================================================================
685 1. make PC21 coming from the channel's node call then treat it as a PC39 and
686 disconnect it.
687 2. Send the client a 'Z' command (shutdown) to see if this has any effect on
688 the hangs.
689 26Dec01=======================================================================
690 1. make some detail changes to help texts
691 2. Added 'all' to the Band's region table to allow 'acc/spot on all/cw'
692 23Dec01=======================================================================
693 1. allow sh/dx on 1000/4000 (or 1000-4000).
694 2. merge sh/dx and sh/dxcc commands (Alias sh/dxcc to sh/dx dxcc). You can
695 now do things like 'sh/dxcc oq2 by w dxcc'. 
696 20Dec01=======================================================================
697 1. Fix 'not' in filtering
698 2. alter default max spots to 100 and the no of WWV to 5
699 17Dec01=======================================================================
700 1. added new satellite stuff from Steve K9AN. Fixed upper/lower problem
701 in convkeps.pl.
702 2. enhanced load/keps to accept a message no. This will create a new keps
703 file from a msg (hopefully containing 2 Line Nasa keps) and then load - all
704 in one step. Added load/keps to the help files
705 3. Updated spanish Messages
706 4. Improve wcy command from Stephan DK8LV's input
707 5. Added set/prompt (and unset/prompt) command so that Stephan can fool some
708 external programs into thinking it is talking to clx.
709 15Dec01=======================================================================
710 1. added superfluous spaces back into PC73 for the benefit of clx
711 14Dec01=======================================================================
712 1. make Spanish in set/lang & Messages 'es' instead of 'sp'
713 2. added prototype WCY and WWV commands (for qualified users only)
714 3. Added Commands_es.hlp contributed by Angel EA7WA
715 12Dec01=======================================================================
716 1. added Commands_de.hlp contributed (in record time) by Stephan DK8LV.
717 2. fixed help command so it uses it!
718 11Dec01=======================================================================
719 1. make PC17 generation more unconditional
720 08Dec01=======================================================================
721 1. added unset/hops command
722 02Dec01=======================================================================
723 1. Fix spurious 'new message for you' messages if things are deleted but 
724 unread.
725 2. stop remote passive nodes (those with version numbers of 0000) from
726 poluting the nodes table. Maybe this will make things slightly more stable.
727 3. Take off rspf checks on announces and spots and allow the dupe filters
728 to take the strain.
729 4. Move the dupe checking AFTER the input filtering for announces and spots.
730 5. Changed the checking of PC19/21 that it doesn't alter the wrong node
731 6. Alter the storage of messages so that illegal characters are stored as '.' 
732 in an attempt to stop such messages from hanging.
733 26Nov01=======================================================================
734 1. Make changes to the installation manual to show making the client before
735 actually trying to use it!  Thanks to oz1lqh.  Also add a line for SuSE
736 distros on useradd.
737 22Nov01=======================================================================
738 1. finally fix DELETE = ^H = Backspace in console.pl
739 21Nov01=======================================================================
740 1. altered the PC16/17 generation slightly to see whether this cures Roland's
741 problem.
742 19Nov01=======================================================================
743 1. added Ducie Island to prefixes
744 17Nov01=======================================================================
745 1. updated the Java Web Interface from Ian, m0azm to allow passwords.  If
746 a user with no password enters anything, including null, it is happily
747 accepted and ignored.
748 2. added the German language to the Messages file from Stephan, dk8lv
749 14Nov01=======================================================================
750 1. make the number of characters of the dx comment dependant on the type of
751 connection. This should mean that 'legacy' user programs can cope.
752 2. move the handling of unprintable characters out of IntMsg
753 07Nov01=======================================================================
754 1. fix is_pctext so that it actually catches corrupt spots and announces.
755 2. fix console.pl so that you can type in '0' again
756 3. Fix problem with reply disappearing up its own bottom.
757 4. Added Steve's latest sh/moon stuff
758 06Nov01=======================================================================
759 1. fix read so that sysop reading doesn't increment the read counter for 
760 private mail not addressed to them.
761 2. fix console.pl to show blank lines more reliably.
762 3. fix msgs so that 2 R: lines are only stored on initial entry (not just
763 after forwarding).
764 04Nov01=======================================================================
765 1. Allow the user to equal the node in RSPF checks (this allows spots and 
766 stuff with the origin and spotter to be the same (although it is STRONGLY 
767 recommended that they are NOT!!! [hint hint]).
768 2. make the send command rather more sensitive to what is allowed. Basically
769 it will only allow TO addresses that are bull addresses (if not private) or
770 vaild callsigns (if private). Bull addresses are the ones in 
771 /spider/msg/forward.pl with a 'T' flag on them. If there is no forward 
772 file it will only allow 'ALL' and 'DX' as valid Bull TO addresses. You may
773 use commas as callsign separators if you like.  
774 02Nov01=======================================================================
775 1. fixed some Aliasing problems, but this whole area will have to be addressed
776 more comprehensively.
777 2. Changed talk logging so that it hopefully is more consistant and maybe even
778 useful.
779 3. Altered the mechanism of the personal emailing so that it uses lower level
780 components and should be therefore available on M$ platforms. You will need
781 to install a version of libnet (perl -MCPAN -eshell, then install Net::SMTP).
782 I believe all 5.6.x perls have this built in (ie M$ should have this). If you
783 are on M$ or you want to use an MTA via SMTP in linux then you need to declare
784 the dns name of the MTA by: set/var $DXMsg::email_server = 'post.fred.net' 
785 (or whatever the MTA is called). You can also use local programs other than
786 sendmail by: set/var $DXMsg::email_prog = '/usr/bin/postfix ..' or whatever.
787 Finally you can alter the 'from' address using: set/var $DXMsg::email_from
788 = 'FBloggs@msn.com' (\@ if you use " and ") - bewarned that you may be 
789 prevented from using just any old address. You can place these commands in
790 /spider/scripts/startup for permanent use.
791 01Nov01=======================================================================
792 1. added information on registration, login scripts and passwords to the
793 26Oct01=======================================================================
794 1. If $main::reqreg = 1 then set/register will allow 'registered' users 
795 full access, if $main::reqreg = 2 then registered users will be 'read-only'
796 (ie the opposite). If $main::reqreg = 0 then registration and its effects
797 are disabled.
798 25Oct01=======================================================================
799 1. added unset/password command to allow sysops (only) to completely delete
800 and remove a user's password.
801 2. make 'read' increment the 'no of times read' for all messages.
802 3. give a read receipt for everybody that reads a message so marked.
803 4. enhance set/email so that if you set email address(es) with this command
804 it will send any messages to your callsign as they come in. unset/email
805 will disable forwarding. 
806 24Oct01=======================================================================
807 1. added (un)set/register, show/registered commands which when a 'set/var
808 $main::reqreg = 1' is done in the startup script will require users to 
809 be 'registered' in order for them to have 'write' access to the node. Non-
810 registered users will only be allowed to TALK or SEND PRIVATE to the cluster
811 sysop callsign.
812 2. Added password interrogation to the ExtMsg connections. If a user comes
813 in via telnet and this is being done with the internal listener and a pass-
814 word has been set for that user - he will be asked for it. You can force 
815 a password interrogation (for ALL users) with a 'set/var $main::passwdreq = 1'
816 in the node's startup script. It is anticipated that if you are using
817 registration you will also issue passwords to those registered users.
818 3. set/password has been changed so that users already with passwords can 
819 change them.   
820 4. A non-registered user will get the /spider/data/motd_nor file instead of
821 the motd on login.
822 5. made the BadWord regexes slightly less aggressive WARNING this may let
823 some constructions thru, but hopefully will also allow more legitimate 
824 foreign (mainly) things thru as well. 
825 19Oct01=======================================================================
826 1. Allow DELETE (0x7f) for backspace in console.pl
827 2. redo prefix table using latest cty.dat
828 14Oct01=======================================================================
829 1. Add the shortform SH/ST like display to sh/user <call> to make it more
830 AK1A compatible (G0RDI+G4PDQ pace).
831 12Oct01=======================================================================
832 1. make del nnn delete messages again (fix system Aliases file)
833 2. substr the subject so that the dup works for stuff coming back via AK1A
834 09Oct01=======================================================================
835 1. change Aliases to allow shutdown as a command again. If you have changed
836 /spider/cmd/Aliases and you update from CVS you may find it better to remove
837 this file and then do another 'cvs update'. Otherwise you may get conflicts
838 and the Aliase file will not load properly. The cvs update will recreate 
839 the (now) missing file.
840 2. Remove the 'please don't use XXXX on here' messages to prevent people
841 from exploring the 'bad words space'. Three bad words will still disconnect
842 without warning. 
843 3. Sending dx spots/announces with bad words will succeed - but only back to
844 the sender. These two mods are designed to annoy the perpitrators of the
845 sort of filth as much as possible whilst not inconveniencing 'normal' users.
846 4. Add expunge feature to kill. Deleting messages now marks a msg for 
847 deletion two days hence. To have the old behaviour, do a 'kill exp' or use
848 the standard alias "expunge". This will cause the message to be deleted at
849 the next queue message cycle.
850 5. Put in prototype echo handling for direct connections using ExtMsg and
851 Listeners.pm.
852 6. fix msgs to g1tlh-2 (as opposed to g1tlh)
853 04Oct01=======================================================================
854 1. allow a residence time of (default) 2 days before actually deleting a msg.
855 2. reduce the number R: lines on a bull from a bbs to 2 (the origin and the
856 last port of call).
857 3. ignore deleted messages for queuing purposes
858 4. store deleted status across restarts!
859 5. make callsign checking more rigorous
860 6. dup check PC49 (kill full)
861 7. improved the regex matching of badwords (more efficient, better coverage)
862 8. added default badword and badw_regex tables (as .issue files) which will
863 activate unless there is one there already. It will NOT overwrite an existing
864 file - so if you change it your changes will remain intact.
865 03Oct01=======================================================================
866 1. don't allow @WWW to become a 'TO' field...
867 2. handle @gb7tlh.#35.eu type addresses as well
868 02Oct01=======================================================================
869 1. fixed the 'ever lengthening msg' syndrome and probably made the whole
870 thing more reliable at the same time.
871 2. do some restructuring of the msg system and upissue the version no.
872 3. fix @xxxx syntax for bbs input
873 01Oct01=======================================================================
874 1. made login info not the default
875 2. change the looping protoection for PC16/17/19/21 and also be more rigorous
876 in who we accept which PC16/17/21's from.
877 3. fix MAJOR disconnect bug introduced accidentally in the NP work.
878 4. Try each badword with an S on the end as well and also check for 'f.u   c'
879 type things as well (this only works for a few wellknown english ones).
880 5. Go back to the old way of caching commands (but without the silly warnings
881 because I know better what I am doing now). This allows symbolic debugging
882 of commands again without coredumps. Hurrah!
883 6. Add badword handling for messages. Users will get rude messages back if
884 they try to send naughty words in msgs. Incoming messages with badwords will
885 be dropped on receipt and their contents logged.
886 7. and if you swear 3 or more times you are unceremoniously logged out.
887 30Sep01=======================================================================
888 1. made some small bug fixes in rspf checking and also messages. 
889 23Sep01=======================================================================
890 1. I have incorporated Steve's (K9AN) lastest sh/sun and sh/moon stuff which
891 copes much better with some of the end effects that occur in these calc-
892 ulations. You can now also see up to a year into the past or future. The 
893 results compare favourably with the US Naval Obs (unlike certain other
894 software's output which "I would not want to use their results to aim my 
895 moon rocket..."). It also fixes some ambiguity about which day the results
896 are actually for.
897 21Sep01=======================================================================
898 1. fix set/lockout so that it is possible to lock out all SSIDs except those
899 specifically unlocked and so that you don't need to lock the non-SSID call in
900 order to lock an SSID call. So set/lock g1tlh will lock out all instances of
901 g1tlh, g1tlh-1, g1tlh-15 etc except (for instance) unset/lock g1tlh-9.
902 2. show/lock allows partial callsign matching so sh/lock gb7 will only show
903 GB7* calls that are locked.
904 3. Had a grand shift around for the start of NP.
905 19Sep01=======================================================================
906 1. put in some rudimentory rsfp checking for various things
907 2. tried to do some fixes on console.pl - YOU WILL REQUIRE Curses 1.06 from
908 CPAN (perl -MCPAN -eshell, then at cpan> install Curses). 
909 17Sep01=======================================================================
910 1. Fixed help and apropos commands so that they default to english if
911 the language is not english and help in the 'not english' language isn't
912 available.
913 2. added some help text for sh/newc.
914 15Sep01=======================================================================
915 1. released 1.48
916 2. found 1st bug, fixed unset/logininfo reseting itself after logout 
917 14Sep01=======================================================================
918 1. added the start of script files on login/startup. You can now add 
919 commands (for example to set variables) to a file called 
920 /spider/scripts/startup. You can also put in scripts for a callsign which
921 will be executed when that callsign logs on. A sample script is in the
922 directory (you did remember to do cvs update -d?). User settable versions
923 of this will happen when the general mechanism for doing that is available.
924 2. Added set/unset/anntalk commands. If you unset/anntalk then you will
925 no longer see many of the of talk like announces. Unfortunately you may
926 miss the odd useful one as well (but since everything is repeated many times
927 you probably won't :-)
928 3. centralise the invalid callsign check so that g1tlh1 and similar calls
929 will not be allowed to login anymore.
930 4. Fiddle with the lockout mechanism so that set/login g1tlh also locks out
931 g1tlh-1 -> g1tlh-15 UNLESS one of these is specifically unlocked.
932 5. Make sh/log only show stuff that sh/ann, sh/talk, sh/rcmd doesn't.
933 6. Make the scripts look for user and node_default files if there isn't a 
934 more specific one.
935 7. add the blank command which prints nn blank lines (default 1), this cmd
936 can also print lines of characters: see help for examples.
937 13Sep01=======================================================================
938 1. did some work on making talk more intelligent and fixed a>b problem.
939 2. fixed a nasty problem on input when being hit with full buffers of 
940 data (eg at init time with large lists of node/users on fast links).
941 3. fixed realtime input filter changing.
942 4. added announce->talk conversion for routable calls when announces of the
943 form 'to g1tlh hello', 't g1tlh hello'  or 'g1tlh hello' appear. 
944 This also suppresses similar announces for users whose callsign is not the 
945 one in the announce.
946 5. Change the badwords interface to be the same as baddx, badspotter et al.
947 added set/badword, unset/badword and show/badword. This routine will auto
948 convert (and delete afterwards) the old badwords file. 
949 6. fix intermittant bullitin mail forwarding?
950 11Sep01=======================================================================
951 1. added IP address logging of connections
952 10Sep01=======================================================================
953 1. clear/* node_default and user_default now work.
954 2. in acc or rej/* you can now use (comma separated) prefixes as well as lists
955 of numbers for things like *_dxcc, *_itu and *_cq (eg: by_dxcc ve,w); just
956 remember that countries like ve and w have lots of zones and itus!
957 3. Added all the clear/* commands to help and added some comments about 2.
958 4. All filters (including *_default ones) are now reinstalled on channels in
959 realtime, so changing a filter does NOT require a disconnect and reconnect
960 cycle anymore. 
961 09Sep01=======================================================================
962 1. Add show/dxstats command
963 2. Add show/hfstats command
964 3. Add show/vhfstats command
965 4. Add show/hftable command
966 5. Add show/vhftable command (BE WARNED, the first time you run one of these
967 commands it will take some considerable time to complete, thereafter it will
968 be a lot faster).
969 08Sep01=======================================================================
970 1. Update the sgml docs on filtering a bit.
971 06Sep01=======================================================================
972 1. prevent nodes appearing as users from incoming PC16s
973 2. Change ping averaging to be like TCP and become a smoothed RTT.
974 3. Make all the Prompts in stat/* like output appear in alphebetical order
975 4. Fix problem with 17m spots not appearing in sh/dx
976 5. pump up eph dups everytime they re-occur and increase life to 180 secs
977 04Sep01=======================================================================
978 1. add delete/user command
979 03Sep01=======================================================================
980 1. make spot dups look back 5 mins.
981 2. strip the top off each character in any text field of a Spot for duping.
982 3. Try to make the routing tables more accurate for users that login to
983 more than one node.
984 4. Make PC50s come out in one heap on all channels every 14 mins, instead of
985 on the 14th minute in the connection time for each channel. This should 
986 reduce (slightly) the dups that are dumped.
987 5. Speed up input queue processing (a lot).
988 6. make set/isolate and acc/route mutually exclusive (and issue appropriate
989 error messages) and fix set/iso on PC18 input.
990 7. Improve stat/route_node and stat/route_user for diagnostics.
991 8. strip top bit of comments in ann/spots.
992 9. fix the announce filtering problem.
993 10. Fix the double announcement of node disconnections?
994 01Sep01=======================================================================
995 1. Change build number calc (hopefully for the last time)
996 27Aug01=======================================================================
997 1. make rej/wwv and rej/wcy work
998 26Aug01=======================================================================
999 1. make all newly learned nodes locked out by default.
1000 2. add lock_nodes.pl which locks out all the nodes in the user file whose
1001 privilege is 1 or less and which isn't mentioned as an argument to the 
1002 command on the command line.
1003 3. make set/node, set/spider and their friends unlock a node as well as make
1004 them one. 
1005 4. Make sh/log et al more efficient / less memory hungry (and the display
1006 the correct way round!)
1007 24Aug01=======================================================================
1008 1. Allow badmsg to reject on interface callsign ('I')
1009 20Aug01=======================================================================
1010 1. protect against PC41s with field[3] == field[2]
1011 2. Redo Julian stuff as proper objects
1012 3. Make the various Log display come out forwards instead of backwards
1013 4. Add the dbgclean routine to system cron to clear out all debug files 
1014 more then 10 days old.
1015 19Aug01=======================================================================
1016 1. Fix rcmds
1017 2. make isolation when there are no filters present work again?
1018 3. dup check PC16/17/19/21 !
1019 17Aug01=======================================================================
1020 1. Sort out PC41 handling to include type 5 records for QRA locators and also
1021 remove all filtering (but retain ephemeral dup checking).
1022 2. Improve format checking in latlong and qra locators.
1023 3. Sort sh/st so that sh/st by itself displays only the local call not the
1024 whole lot (all 17000+ users records in my case). SH/ST ALL does this.
1025 16Aug01=======================================================================
1026 1. send a forward/opernam for a logged in user once a month (when they next
1027 login).
1028 2. rearrange rcmd stuff to be more maintainable and also be certain that 
1029 they are translated in both directions correctly for clx and ak1a style.
1030 3. Allow PC41s to be propagated and hope that the ephemeral dup filters 
1031 do their job!
1032 15Aug01=======================================================================
1033 1. fix problem with talks not coming out anymore
1034 13Aug01=======================================================================
1035 1. fixed problem of dxspots not being echoed back to spotter (announces too)
1036 02Aug01=======================================================================
1037 1. correct manual and help references on accept/route and reject/route. Thanks
1038 to ea1dav for pointing out the errors
1039 2. make sure that the actual line is printed in grepdbg & watchdbg esp. with
1040 ALL the '^' and leading space characters as they really are
1041 30Jul01=======================================================================
1042 1. changes to manuals to add links etc. (g0vgs)
1043 23Jul01=======================================================================
1044 1. made ann,dx spots,wwv,wcy,wx more 'object oriented'.
1045 2. allow for 'enhanced clients' and tell them what sort of thing is being 
1046 sent.
1047 3. Allow debug info to be sent via interface to an enhanced client.
1048 21Jul01=======================================================================
1049 1. started a gtkconsole program. It appears to sort of work. Requires Gtk-
1050 Perl-0.7007.
1051 2. start doing some spot statistical stuff. 
1052 19Jul01=======================================================================
1053 1. changes to Admin Manual to reflect route filtering.  Some alterations to
1054 the help files (g0vgs)
1055 09Jul01=======================================================================
1056 1. fix cron so that it allows stuff to be executed on the hour (ie min=0)
1057 06Jul01=======================================================================
1058 1. fix talk and routing problems to mycall
1059 2. add unset/privilege command to relinquish any sysop privileges you might 
1060 have for the current session.
1061 05Jul01=======================================================================
1062 1. disconnect channels whose route node has disappeared
1063 29Jun01=======================================================================
1064 1. fix merge command
1065 28Jun01=======================================================================
1066 1. fix problems with users on more than one node
1067 27Jun01=======================================================================
1068 1. try adding an ARC mail hack
1069 2. slug the not here messages so they can't loopback
1070 25Jun01=======================================================================
1071 1. added automatic 'not here' message
1072 21Jun01=======================================================================
1073 1. fix (some) problems with 'init'
1074 2. fix stat/msg a bit more
1075 3. small change to PC28 generation to make sure that the subject always 
1076 contains at least a blank
1077 16Jun01=======================================================================
1078 1. fix talk
1079 2. fix stat/msg 
1080 14Jun01=======================================================================
1081 1. changed debug api to (potentially) use less cpu time
1082 2. changed the spider.cgi in Arnold's borrowed java client to Ian's perl 
1083 script
1084 3. Added input route filtering
1085 4. put back the set/isolate logic into routing which is now overridable with
1086 filters whcih means a default filter is no longer generated. If you want the
1087 OLD behaviour, do rm /spider/filter/route/*.pl*, restart and try again. 
1088 5. Add http_proxy to Internet.pm and allow sh/qrz to use an HTTP Proxy
1089 13Jun01=======================================================================
1090 1. fix init cnd rinit cmds
1091 2. add missing clear/route cmd
1092 10Jun01=======================================================================
1093 1. fix set/here and unset/here
1094 2. fix indirect routing to users two hops away
1095 09Jun01=======================================================================
1096 1. more fixes
1097 2. add set/debug filter so that you can see why your filters aren't working
1098 (for sysops only)
1099 3. add ephemera deduping for all those PC41,24,50 etc etc broadcasts 
1100 4. Fix a problem with the connect text being sent on outgoing connections
1101 (this confuses db0fhf amongst other things)
1102 5. catch deep recursion bugs before you run out of memory.
1103 6. Make sure that PC16|17|19|21 update as well as add and delete
1104 7. local announces by the sysop will always be displayed
1105 08Jun01=======================================================================
1106 1. first cut with new routing code. Created NEW_ROUTE branch
1107 2. added acc/route and rej/route commands
1108 3. added stat/route_node and stat/route_user commands to look at the routing
1109 table entities
1110 07Jun01=======================================================================
1111 1. move userconfig.pl and nodeconfig.pl to stat/
1112 2. fix problem with locally connected users not being removed from the 
1113 routing tables
1114 3. Fix the build calc to take into account subdirectories
1115 06Jun01=======================================================================
1116 1. add stat/route_node and stat/route_user commands
1117 2. add sh/userconfig command (to show backward links to nodes)
1118 3. add sh/nodeconfig command
1119 05Jun01=======================================================================
1120 1. add set/bbs command
1121 2. more work on Routing code.
1122 3. status/msg on its own will print the status of the msg system.
1123 4. add sh/newconfig command
1124 03Jun01=======================================================================
1125 1. Fix the problem with ExtMsg and unresolvable IP addresses, hopefully
1126 properly this time.
1127 15May01=======================================================================
1128 1. set/lockout now prevents any outgoing connection taking place.
1129 2. Started the new routing stuff which will run in parallel for a while.
1130 3. changed the msg timeout arrangements so that it might not get stuck so
1131 easily.
1132 4. add $DXMsg::bulltopriv global to make msgs to known callsigns private 
1133 14May01=======================================================================
1134 1. fix problem with re-reading in db definitions for remote databases.
1135 2. try to prevent situations where two can (semi) successfully login, probably
1136 under load, and get a 'tried to connect whilst already connected' abort.
1137 3. change the max number of days to search for spots to 100
1138 11May01=======================================================================
1139 1. allow stat/msg on priv 1
1140 07May01=======================================================================
1141 1. set/page 0 switches off paging
1142 03May01=======================================================================
1143 1. It appears that for ages now, not enough PC19 and PC16s are being sent
1144 if you have more than one of them. Sigh..
1145 02May01=======================================================================
1146 1. put an upper limit on the number of concurrent errors allowed in command
1147 mode (20). This should disconnect runaway spot suckers....
1148 28Apr01=======================================================================
1149 1. fix an occasional problem with 'sorry connected to' messages
1150 23Apr01=======================================================================
1151 1. fix very long standing bug in storing and transmitting spots. The decimal
1152 point was left off :-(
1153 22Apr01=======================================================================
1154 1. Sysops can now have full privileges if there is a ExtMsg listener on 
1155 localhost (or everything) and they telnet to localhost and login with their
1156 callsign. This means that they don't need a client anymore (for local access)
1157 2. added input spot filtering. 
1158 3. Added run_cmd to DXCron which allows you to run any command on the system
1159 from the crontab. (Dunno why I didn't do this before). 
1160 18Apr01=======================================================================
1161 1. added Ian M0AZM's Java Client (SpiderConsole)
1162 17Apr01=======================================================================
1163 1. made a slight speedup on write in Msg.pm (about doubled it)
1164 16Apr01=======================================================================
1165 1. make the correct error messages come out on reject/accept when people
1166 leave out keywords like 'on'.
1167 2. Fairly major changes to the documentation tree.  Split the admin manual
1168 into 2 sections, Installation and Admin and merge the Windows stuff.
1169 15Apr01=======================================================================
1170 1. made some mods to the sgml documentation for 1.47
1171 2. added show/connect command
1172 11Apr01=======================================================================
1173 1. fixed more of the "xxx disappeared from yyy" messages
1174 2. altered the build no logic so that it always checksums the same files
1175 regardless of whatever else you might have in the directory.
1176 3. made shortcut at shutdown so that you don't get a storm of PC21s on busy
1177 nodes as each connection goes down. Just send a pc39 to each interface and
1178 nothing else.
1179 4. changed action of SIG{INT} and SIG{TERM} so that they now work on MSWin32
1180 10Apr01=======================================================================
1181 1. altered PC21 logic somewhat to eliminate dup PC21s
1182 2. disconnect should remove dangling local users in the routing table.
1183 3. fixed nasty recursive timer bug
1184 4. added some extra info to make connect tracking a bit easier.
1185 5. improved docs on connect scripts a bit (to include agw connects)
1186 09Apr01=======================================================================
1187 1. changed lockfile name to cluster.lck (from .lock) for MSWin's benefit
1188 08Apr01=======================================================================
1189 1. added a quick installation guide to the admin manual and removed references
1190 to client.pl (g0vgs)
1191 01Apr01=======================================================================
1192 1. changed agwrestart semantics. You need to use main::agwrestart() in your
1193 crontabs rather than AGWMsg::init();
1194 2. try to thread winclient.pl for MSWin32.
1195 31Mar01=======================================================================
1196 1. added agwrestart command
1197 2. add Iains Windoze installation manual (g0vgs)
1198 3. various alterations to adminmanual and initial version of the CVS changes
1199 file (g0vgs)
1200 30Mar01=======================================================================
1201 1. fix errors on accept in ExtMsg and in Msg
1202 2. fix the non-blocking problems of connects (and other things in general).
1203 non-blocking only works for unix implementations at the moment.
1204 3. add rinit command (sends a PC20)
1205 4. improve debuging so that stuff is always escaped and a new 'raw' debug 
1206 mode that shows everything sent and received in glorious hex and characters
1207 29Mar01=======================================================================
1208 1. add better tracking of AGW circuits (possibly)
1209 2. add set and unset/agwmonitor (ing) [for all the notice it seems to take]
1210 28Mar01=======================================================================
1211 1. AGW engine stuff now accepts incoming calls and at least attempts to do
1212 outgoing ones. YMMV.
1213 2. fixed 'always' telnet on a client line in a connect script
1214 27Mar01=======================================================================
1215 1. add first cut at an AGW Engine. Copy /spider/perl/AGWConnect.pm to 
1216 /spider/local and edit it appropriately. You shouldn't need a login and passwd
1217 if you are using the default setup. It may allow incoming connects (and then
1218 again it may not - I don't have a reliable infrostructure to test with at the
1219 moment). The AGW Engine is a M$ thingy, but that don't preclude you connecting
1220 to it from a unix box. 
1221 22Mar01=======================================================================
1222 1. edit the helpfile for set/debug and add help for show/debug
1223 2. Allow ^Z again on messages
1224 3. Added back onboard support for ax25 OUTBOUND connections. You will need
1225 exactly the same facilities as before (ie netrom_call, ax25_call suid root 
1226 etc) but it is called direct from the cluster.pl - client.pl is DEAD!
1227 19Mar01=======================================================================
1228 1. Add 'not allowed' messages into sh/filter with callsign and reduce priv
1229 2. decode %xx characters in winclient.pl
1230 necessary to 1.
1231 18Mar01=======================================================================
1232 1. minor changes to user and admin manuals.  Added revsion numbers
1233 17Mar01=======================================================================
1234 1. put block check back in, try a work around for EWOULDBLOCK/EINPROGRESS
1235 for M$. 
1236 16Mar01=======================================================================
1237 1. integrate build number into main cluster and change the PC18 to show 
1238 version and build in the text portion
1239 14Mar01=======================================================================
1240 1. first cut at outgoing ax25 /external program connects
1241 2. slight change of interface to connect
1242 3. added a build number to sh/version
1243 13Mar01=======================================================================
1244 1. implemented first cut at non blocking connect
1245 2. removed memory leakage in connects
1246 3. add link IP address if available on who
1247 4. made the \r\n work correctly on External connections
1248 5. removed client.pl
1249 6. fixed memory leakages in DXMsg
1250 7. fixed pc39/21 handling
1251 8. fixed routing table issues and general disconnection tidy up
1252 10Mar01=======================================================================
1253 1. minor changes to the admin manual to reflect differences in distibutions
1254 thanks to pa3ezl (g0vgs)
1255 2. add (finally) the first draft of the usermanual (g0vgs)
1256 05Mar01=======================================================================
1257 1. do some major surgery on the connect logic to shorten the possibility of 
1258 duplicate connects happening
1259 2. fix stupid error on sh/qrz queries that don't work
1260 04Mar01=======================================================================
1261 1. allow fallback to english for help
1262 03Mar01=======================================================================
1263 1. allow incoming and outgoing IP connects direct to cluster.pl
1264 2. fixed (long standing)a hole in PC17 handling
1265 3. added winclient.pl (actually just a very basic client) from Iain G0RDI
1266 4. Added Spanish as a language (thanks ea1dav) (g0vgs) 
1267 5. ignore BUST(ED) spots
1268 28Feb01=======================================================================
1269 1. allow sh/c gb7 (ie show the config of all gb7 nodes)(for example)
1270 2. get rid of spurious DXHash 'uninitialised' messages if no corresponding 
1271 file is present.
1272 3. changed policy of $censorpc in DXProt.pm so that badwords are looked for
1273 in all text announces etc.
1274 4. Unpad (remove excess spaces from) spotted callsigns in PC11. 
1275 5. test for opertaing system in various places and do different if M$
1276 27Feb01=======================================================================
1277 1. allow partial node callsigns on sh/c (eg sh/c gb7)
1278 2. Changed Msg.pm to allow a more generalised interface with more than one
1279 listener.
1280 3. Added IntMsg.pm to implement the internal connection management that is
1281 currently scattered about the cluster code.
1282 25Feb01=======================================================================
1283 1. Fixed watchdbg so that simple arguments work again
1284 22Feb01=======================================================================
1285 1. Added platform name to sh/version
1286 2. changed client.pl so that it send \r\n instead of \n on telnet connects
1287 3. added lineend '\r\n' command to connect scripts so you can override 
1288 defaults
1289 03Feb01=======================================================================
1290 1. Changes and additions to the manual and added a help file for sh/log (g0vgs)
1291 13Jan01=======================================================================
1292 1. Documentation alterations to match new commands etc (g0vgs)
1293 08Jan01=======================================================================
1294 1. Changed the way that badnodes, baddx etc work. There is a new general way
1295 implemented (dunno why I didn't do this before - hey ho...) as a consequence
1296 there are set/unset/show baddx (for bad dx callsigns) badnode (for dx from
1297 bad nodes) badspotter (for bad spotters of dx eg VE2STN). Expect more of 
1298 this sort of thing...
1299 2. Added one to the copyright dates...
1300 06Jan01=======================================================================
1301 1. Fix set/obscount so it actually works.
1302 2. Allow different number formats for set/pingint eg: 5m for 5 minutes and
1303 120s for 120 seconds (and 1h for 1 hour).
1304 03Jan01=======================================================================
1305 1. Added a txt directory for txt versions of manuals (g0vgs)
1306 2. Various documentation changes
1307 02Jan01=======================================================================
1308 1. added a help file for forward/latlong and updated the admin manual to
1309 match. (g0vgs)
1310 2. Add spot2csv.pl to convert spot files into tab delimited .csv format.
1311 3. Add show/route to see which interface a station is connected on.
1312 31Dec00=======================================================================
1313 1. add lat/long info to show/prefix
1314 30Dec00=======================================================================
1315 1. added latest version of the admin manual from Ian G0VGS.
1316 23Dec00=======================================================================
1317 1. don't route anything back down the channel it came from.
1318 2. and, in the process, fix some silly errors in routing converted rcmd PCs
1319 3. changed all occurrances of 'freq' in filter help to 'on' and corrected
1320 some errors (eg freq/ssb).
1321 4. added latest admin manual.
1322 18Dec00=======================================================================
1323 1. fix double printing of DB results
1324 2. add new style filtering for WWV and WCY to complete the set
1325 3. got the field nos right (hopefully) on Announces for filters
1326 05Dec00=======================================================================
1327 1. fix frequency hinting routine so it correctly handles things like 'on 23cm'
1328 where digits are the 'wrong' way round.
1329 2. made default max days to search for spots 3 months.
1330 3. added hex decodes for those pesky 'national' characters that aren't really
1331 in grepdbg and watchdbg.
1332 4. decide that we are using Latin-1 and therefore characters 0x80-0x9f are
1333 not allowed.
1334 5. fix the announces so that they are all UPPER CASE for poor old DXTelnet.
1335 03Dec00=======================================================================
1336 1. change grepdbg and watchdbg so that you can see a number of lines before
1337 the condx that you are looking for so:-
1338   grepdbg 3 LOOP
1339   watchdbg 3 LOOP 
1340 will show both the LOOP line and the preceeding 2 lines.
1341 2. add PCPROT to all error condx lines in DXProt.pm so that you can watch
1342 for them more easily.
1343 30Nov00=======================================================================
1344 1. remove %nn strings from dups of announces and spots
1345 2. remove check for ssids on PC41s 
1346 29Nov00=======================================================================
1347 1. make some small changes to DXmsg to try to track delete problems?
1348 2. fix ann/full so it doesn't dup
1349 27Nov00=======================================================================
1350 1. alter sh/wcy output slightly
1351 26Nov00=======================================================================
1352 1. made it possible for sysop calls to be used on other nodes and still have
1353 anti loop checking on PC16/17.
1354 25Nov00=======================================================================
1355 1. -l <nnn> now works on C client
1356 2. -e toggles echo cancelling (normally on) on C client
1357 20Nov00=======================================================================
1358 1. added even more checking to PC16,17 and 39
1359 19Nov00=======================================================================
1360 1. improve reaping code a bit more.
1361 2. put some extra checking in the PC16,17,19,21 code.
1362 3. fix problem with the aliased user disappearing and loads of 'unitialised'
1363 messages coming out.
1364 16Nov00=======================================================================
1365 1. Alter the process reaping code in cluster.pl to use waitpid
1366 12Nov00=======================================================================
1367 1. Fix lack 't' action in Filter.pm
1368 08Nov00=======================================================================
1369 1. fix cosmetic errors in for/oper for 'users'.
1370 07Nov00=======================================================================
1371 1. removed sh/call because the owner isn't happy about us using it. 
1372 2. change sh/qrz to the new interface. MUCH QUICKER! you will need a user id
1373 and password from qrz.com to use it and you will have to copy the 
1374 /spider/perl/Internet.pm to /spider/local and alter it accordingly. Do 
1375 remember to set $allow=1 as well! The new interface comes courtesy of Fred
1376 LLoyd, the proprietor of http://www.qrz.com
1377 06Nov00=======================================================================
1378 1. Added sh/qrz to the list of callbook services
1379 05Nov00=======================================================================
1380 1. 75% speed up on sh/dx !, lower memory usage as well!
1381 2. Fixed problem with clear/spot 0 (how did this one last so long!!!)
1382 3. add 'on' in accept/reject spots as synonym for 'freq'
1383 4. add the same speed up to general log printing
1384 5. fixed help \ 
1385 04Nov00=======================================================================
1386 1. fix sh/filter so ity now works for any callsign (and not just connected
1387 ones).
1388 2. Have only one is_callsign and not an iscallsign as well.
1389 3. Add set/hops and show/hops commands.
1390 4. Add unset/badnode command and put some help in for these commands
1391 03Nov00=======================================================================
1392 1. allow - in filter strings
1393 2. store only the filter expression NOTE BENE: you will need to clear all 
1394 your existing filters and re-enter them!!!!!!
1395 3. Added announce filtering
1396 4. Fixed problem with announce filtering on output to the node
1397 02Nov00=======================================================================
1398 1. updated filtering logic. You will need to RECREATE your filters (clear/spot
1399 all, then start again) for testing.
1400 2. allow PC73 for DXNet
1401 3. added some help text for filtering and filtering spots in particular.
1402 01Nov00=======================================================================
1403 1. put PC11 field 2 check back to m for pc text.
1404 2. improve 'simple' callsign checking
1405 3. Added the first cut of the new user/sysop filtering code. This cut works 
1406 for spots and the syntax is:-
1407
1408 accept/spots [<call>] [input] [<filterno>] things ..
1409 reject/spots [<call>] [input] [<filterno>] things ..
1410
1411 where things are: 
1412   freq 0/30000 | hf | hf/cw | 6m,4m,2m
1413   call G,PA,HB9
1414   info iota
1415   by G,PA,HB9
1416   call_dxcc 61,62
1417   call_itu 31
1418   call_zone 14,15,16
1419   by_dxcc 61,62
1420   by_itu 31
1421   by_zone 14,15,16
1422   origin GB7,MB7
1423   channel GB7DJK,GB7BAA
1424       
1425 You can simply string these together on one line one after the other and 
1426 there is an implied 'and', you can also string together with 'or' 'not' (or
1427 '!') and '(' and ')' - in otherwords an arbitrary expression.
1428               
1429 You can see what you have done with:
1430
1431 show/filter [<call>]
1432
1433 You can clear your work with:
1434
1435 clear/spots [<call>] [input] [<filterno>|all]
1436
1437 Have fun and someone please write the documentation.
1438 4. Added show/msg_status.pl sysop command (shows some info on what is busy in 
1439 the message system)
1440 31Oct00=======================================================================
1441 1. add 0x8e to the list of characters we clobber (make xterm go into graphics
1442 mode).
1443 30Oct00=======================================================================
1444 1. put in new Filter::it code and tested it. Now all we have to do is write
1445 the user access routines (oh and the help files!).
1446 29Oct00=======================================================================
1447 1. put in echo cancelling measures into the clients. This doesn't mean you
1448 shouldn't take steps to prevent echoing on node links, but it may help where
1449 (whatever you do) it still bloody echos! This is experimental.
1450 2. store dxchan and mynode as callsigns (and not references) in the routing 
1451 tables and do some checking in accessors to see if we can capture some errors.
1452 3. tart up the stat/chan etc display to give more useful debugging info 
1453 28Oct00=======================================================================
1454 1. updated show/sun and show/moon from stuff sent by Steve Franke K9AN
1455 2. added show/call which queries jeifer.pineknot.com for any call in the 
1456 world (as opposed to UALR which only does US calls). Inspired by a bit of 
1457 perl sent to me by Steve Franke (again!) and also Angel EA7WA who gave me the
1458 pineknot ip address.
1459 3. fixed clients so that they accept -0 as a valid SSID and then strip it off
1460 as though they had come in without (why has this taken so long to appear? How
1461 long have we been running this code ??????). 
1462 27Oct00=======================================================================
1463 1. alter the code in clean_old of DXMsg system to see if we get some different
1464 behaviour with random crashing
1465 26Oct00=======================================================================
1466 1. if there is a 'connected' file in /spider/data then the client will send
1467 it out to the user after connection.
1468 25Oct00=======================================================================
1469 1. fix catchup and uncatchup commands so that they accept ranges
1470 24Oct00=======================================================================
1471 1. added cty.dat from http://www.k1ea.com/cty/index.htm to the prefix_data.pl
1472 data file and modified create_prefix.pl accordingly.
1473 2. the 'no text line' messages should now propagate correctly
1474 3. added the dxcc, itu and cq zone numbers for announcer and origining node 
1475 on announce filters - see the /spider/filter/ann/*.issue files for more info.
1476 4. you can now specify a 'user_default.pl', 'node_default.pl' and 
1477 'in_node_default.pl' in each of the filter directories
1478 23Oct00=======================================================================
1479 1. Added K5K as Kingman Reef
1480 1. Added K7K as Kure
1481 17Oct00=======================================================================
1482 1. force frames to go down the local interface when doing a route. This is 
1483 particularly important for pings!
1484 16Oct00=======================================================================
1485 1. add a ':' after 'G7BRN de G1TLH' in a talk message.
1486 2. added /J to the list of things to ignore (as in G1TLH/J) in prefix 
1487 processing (ie /J mean Jota not /JA [Japan]).
1488 3. change all INCOMING 00-08 0A-1F and 9B characters that make it past the
1489 intermediate client->server protocol to '.'.
1490 04Sep00=======================================================================
1491 1. made PC10,11,12 badword checking dependant on a flag variable ($censorpc)
1492 default = 0 (off).
1493 02Sep00=======================================================================
1494 1. fix a long standing talk bug to do with routing to specific nodes (t xxx >
1495 yyy .....)
1496 2. Add badwords checking in various places. You put a list of words into
1497 /spider/data/badwords one or several per line. Lines starting with # are
1498 ignored. PC10, PC11, PC12 with words contained in this file will not be
1499 sent on. Also ann, talk and dx commands have badword checking added. Words
1500 are NOT case sensitive, but you will need to put all the endings in (eg 
1501 ...k, ...ker, ...king).
1502 3. Added new version of admin manual from G0VGS.
1503 01Sep00=======================================================================
1504 1. allow blank on field 4 of PC10 (even though it's "illegal").
1505 28Aug00=======================================================================
1506 1. changes DXChannel::get_all_ak1a to get_all_nodes.
1507 2. ignore PC21s coming in on the interface with that callsign (ie nodes 
1508 trying to disconnect themselves).
1509 3. output correct PC29 on blank lines and escape ^ characters differently 
1510 (and transparently for spider nodes).
1511 26Aug00=======================================================================
1512 1. make blank origins on messages the node call.
1513 2. added new version of FAQ from Ian G0VGS
1514 3. added a dummy PC75 command (WCY merge?)
1515 4. Don't allow mail routing for clx nodes
1516 5. Log isolates
1517 25Aug00=======================================================================
1518 1. moan about and then delete empty message files
1519 24Aug00=======================================================================
1520 1. Removed WWV command so that users can't interfere (read mess up) the
1521 automatic feeds which come from various places on the net.
1522 23Aug00=======================================================================
1523 1. Added persistant dupe file so that all dupes are stored here (including
1524 announces) - announces are now kept for 5 days (as default).
1525 2. limit the characters stored in a dupe for spots and announces
1526 20Aug00=======================================================================
1527 1. Added system Alias for set/nodxgrid => unset/dxgrid
1528 2. Add full individual checking for all PC protocol fields in all messages
1529 and removed any language dependant stuff (hopefully).
1530 3. console.pl is now a bit more international (client.c/pl already are)
1531 19Aug00=======================================================================
1532 1. Added an efficiency thing for AUTOLOADed accessors from OO Perl by Conway.
1533 2. Fiddled with the rtty and digital bandplan frequencies.
1534 18Aug00=======================================================================
1535 1. added a couple of changes for perl 5.6.0
1536 2. removed del_dup from DXUser for earlier versions of DB '1.85' (ie real ones
1537 not 2.x versions in 1.85 compatibility mode).
1538 3. Started the OOing of the PC protocol stuff.
1539 15Aug00=======================================================================
1540 1. added 1.25 of the admin manual html
1541 14Aug00=======================================================================
1542 1. Added regex support to sh/dup_*.pl commands
1543 2. fixed rcmd in crontab so that will work again
1544 13Aug00=======================================================================
1545 1. removed extra /60 in AnnTalk to make deduping of announces work a bit
1546 better for longer...
1547 05Aug00=======================================================================
1548 1. Fixed hex character problem put in somewhen in the C Client
1549 03Aug00=======================================================================
1550 1. caught some more signals (are any of these causing the random stopping
1551 of the code?
1552 2. the Console now requires 1.05 of the Curses module ^R REFRESHES THE SCREEN
1553 (as does ^L) AT LAST!!!!!
1554 02Aug00=======================================================================
1555 1. put back hex check exception for PC29
1556 01Aug00=======================================================================
1557 1. made the export and import ascii system work finally. The user_asc file
1558 generated (automatically and 0000Z Sunday morning) is autoloading. Just 
1559 execute it and it will automatically reload your user database.
1560 2. remove import_users.pl no longer necessary
1561 31Jul00=======================================================================
1562 1. try to fix paging problem.
1563 2. added help for spoof and set/forward
1564 3. fixed bogus callsign check for field 2 of a PC12
1565 4. Add DB_File to DXCommandmode to make it available for commands
1566 30Jul00=======================================================================
1567 1. Added talk mode so that I don't have to keep typing T <call> all the time.
1568 2. fiddled around with storing of Debug messages a bit more.
1569 3. bomb proofed the type command.
1570 4. started the objectifying for talk, dx and announcements.
1571 5. fix talkmode so that it only does 'via' PC10s when it really needs to.
1572 6. SEND now displays a message if you try to do it in not prompt mode.
1573 7. stopped a few more things being done by rcmd (eg send, talk, ann, dx)
1574 8. tidied up the talking a bit more.
1575 9. Increase default hop counts all round.
1576 10. Adjust hex encoding so that 8 bit characters should now go thru
1577 11. check more of the essential protocol fields for 8 bit characters.
1578 29Jul00=======================================================================
1579 1. added forward/latlong which will forward ALL the users that have a latitude
1580 and longitude set on them to one or more locally connected nodes - with a hop
1581 count of 1.
1582 2. speeded up the show/node command by using the DB_File interface and 
1583 sequentially reading the data directly and only 'get'ting the ones that are
1584 nodes.
1585 3. did the same for show/isolate and show/lockout.
1586 28Jul00=======================================================================
1587 1. fixed watchdbg midnight rollover loop and removed the date part of the 
1588 date/time translation to leave just the time.
1589 27Jul00=======================================================================
1590 1. made sure that 'en' is the default language on new users.
1591 2. issue error message if shutdown is attempted by a low privileged user.
1592 3. Make sure a privilege is defined for all users (even if it is 0).
1593 4. Try to fix some more dups (and the time on them).
1594 5. make the time stored on dups generated locally on spots an integer no of 
1595 minutes * 60 
1596 6. send unsolicited PC[38]5s to the sysop if online.
1597 7. merged current html from www.dxcluster.org with Ian's stuff
1598 8. Added sgml files into the source tree
1599 9. changed default paclen in client.c to 236
1600 26Jul00=======================================================================
1601 1. added wantgrid (to control display of grid square info on DX Broadcasts)
1602 2. added lastoper for controlling periodic demands for user info from other
1603 nodes.
1604 3. added spiderFAQ stuff from Ian G0VGS and latest update of the admin manual
1605 4. changed updating and deleting from user file in an attempt to keep down
1606 duplicates and possibly corruptions.
1607 5. added a DXUser::export routine to allow the cluster to automatically 
1608 export the user data in ascii from cron.
1609 6. added a line in the ISSUED crontab to do the export once a week
1610 7. delete annok and dxok if set to 1 in user records.
1611 8. added export_users command to allow arbitary exporting of user files
1612 9. added set and unset/dxgrid command to allow control over the grid squares 
1613 on DX announcements
1614 10. Removed export_user.pl (no longer needed)
1615 11. made import_users.pl accept a non related input filename and always
1616 update the current user file.
1617 12. added an 'auto rcmd <node> for/oper <call>' for people I can see on the
1618 cluster that issue spots and for whom I have no qra info (no more than once
1619 a month). This isn't the default - set $send_opernam in
1620 /spider/local/DXProtVars.pm (copied from /spider/perl). Good for gateways.
1621 13. Despace spot texts properly again for deduping purposes.
1622 14. Corrected Pc84/85 handling a bit.
1623 15. Sync the user database every 15 secs to see whether we can reduce the 
1624 corruptions and duplicates.
1625 25Jul00=======================================================================
1626 1. ignore \n in ax25 mode for C client.
1627 2. remove extra space at the end of a DX spot announce when no grid square
1628 is output.
1629 3. added new admin manual from Ian G0VGS
1630 20Jul00=======================================================================
1631 1. Finally managed to update my source with the sourceforge one
1632 2. added user->qra cleaning in various places
1633 3. added four digit locator strings to broadcast DX spots (for users).
1634 4. PC11 with blank callsigns should now be ignored.
1635 5. put back the unpadding to the PC11 dup checking to catch spots with added
1636 blanks at the end of lines.
1637 25Jun00=======================================================================
1638 1. added 0 to the regex that checks for valid data on the cluster.pl->client
1639 channel - this will allow G0VGS and G0RDI to connect....
1640 2. removed technically unnecessary /= 60 from the dup routines to see if 
1641 Arnold's Sparcs don't then crash.
1642 19Jun00=======================================================================
1643 1. move ann_dup, spot_dup etc to dup_ann, dup_spots etc
1644 2. made mode 3 the default line ending convention for all out going connects
1645 via telnet in client.pl
1646 18Jun00=======================================================================
1647 1. fixed line ending ambiguities (I think) for telnet connections. Well 
1648 actually only really band aided it. It works but isn't how I want it. 
1649 Client.pl has got to go....
1650 2. Added 1.21 of Ian G0VGS's admin manual
1651 17Jun00=======================================================================
1652 1. I believe I have fixed all the login/logout 'broken pipe' errors
1653 2. Added G0RDI's 'links' command.
1654 3. added update_sysop.pl which cleans out all previous versions of the sysops
1655 information from the user database and recreates it with that in DXVars.pm
1656 4. Added node type to links and who
1657 5. Hardened up the cluster->client link in the cluster software so that 
1658 rubbish on port 27754 doesn't (usually) crash the cluster.
1659 14Jun00=======================================================================
1660 1. fixed sh/node crash
1661 2. fixed RTT in who.pl
1662 13Jun00=======================================================================
1663 1. fixed looping bug in C client on ending.
1664 12Jun00=======================================================================
1665 1. Added RCMD for clx
1666 2. Added WCY processing
1667 3. Added new node types (clx, spider, dxnet, arcluster)
1668 4. Store echo settings
1669 5. Store pagelth settings
1670 6. sort out source of DXVars for callbot.pl
1671 7. added sh/isolate
1672 8. added sh/lockout 
1673 11Jun00=======================================================================
1674 1. removed extraneous DXDebug from DXUtil
1675 2. added help for set/echo
1676 3. Centralised all spot, wwv and ann dup handling into respective packages.
1677 4. Created new AnnTalk package (for above and OOing announce and talk 
1678 handling).
1679 5. Fixed problem with outputting lines with | in them to console.pl.
1680 10Jun00=======================================================================
1681 1. got rid of some more nasty bugs in sh/qra.
1682 2. fixed 9A3xx to always be Croatia (and not Haiti!).
1683 09Jun00=======================================================================
1684 1. change some print commands in DXMsg to dbg('err'...
1685 2. overloaded confess, croak et al into DXDebug and removed Carp from 
1686 everywhere and checked that the necessary debugging really does go into
1687 the debug files now.
1688 3. changed print statements in cluster.pl to dbg('err',... so they go into
1689 the debug files as well.
1690 4. Altered the logic around duplicate spots, reduced the length of comment
1691 checked to 20 characters (this should solve some problems including those
1692 people sucking ar-cluster spots with prefixes in the extreme rh end). 
1693 08Jun00=======================================================================
1694 1. fixed problem with binary characters from cluster->client
1695 2. added set/echo and unset/echo commands
1696 3. echo login characters on login: prompt for C client
1697 4. Send \r\n on telnet connections for C Client
1698 5. Make echoing the default option (for M$ telnet clients :-()
1699 11May00=======================================================================
1700 1. fixed looping in Msg.pm (at last)
1701 10May00=======================================================================
1702 1. wrote a cross between 'tail -f' and grepdbg so that you can watch the
1703 debug files for particular strings and only have them print out. 
1704 05May00=======================================================================
1705 1. rewrote parts of Msg.pm and client.c so that the messages no longer use
1706 a length word at the front of each one. They are simply strings of characters
1707 separated by a \n. No binary characters are allowed (they are encoded as %nn)
1708 a la HTTP. This hopefully cures Arnold's problem and also make it more
1709 secure anyway. It also paves the way for the ax25/ip multicast client.
1710 30Apr00=======================================================================
1711 1. put some extra checks and balances in to message send routine in Msg.pm to
1712 see if I can prevent the error seen by Arnold (which I think is only likely to
1713 appear in heavily loaded sites).
1714 25Apr00=======================================================================
1715 1. Changed reply so that you can reply to more than one address privately
1716 31Mar00=======================================================================
1717 1. fixed nnn-mmm in kill (erase/delete) msgs so that mmm is also deleted and
1718 not just nnn -> mmm-1.
1719 2. Added an autosplit to message importing so that messages are split
1720 automagically into bits if the filename used in the import directory starts
1721 with "split". This will add a [1/5] type string on the the end of the subject. 
1722 3. dedupe more aggressively on the text of Spots so that only the 1st 27 chars
1723 of text are considered (as opposed to the whole lot).
1724 30Mar00=======================================================================
1725 1. altered client.pl connect code so that it doesn't falsely recognise 
1726 /spider/src/client as a 'client' instruction.
1727 28Mar00=======================================================================
1728 1. Added buffering to client 
1729 2. Fixed LOGIN so that you can login with an arbitrary callsign
1730 27Mar00=======================================================================
1731 1. updated wpxloc.raw and rsgb.cty for 4W and TX0.
1732 2. display 'start time' rather than 'last start time in' in who.
1733 3. Allow local users to see their own sh/talk or sh/log stuff.
1734 4. A more robust version of the C client.
1735 5. Added a message exporting command 'export'.
1736 6. allow swopping on all messages, including imported and manually sent ones
1737 7. S A < B @ C $BID now works from the command line and thus bbses ought to
1738 be able to send messages into the cluster. Bids are (currently) ignored.
1739 26Mar00=======================================================================
1740 1. first cut of C client
1741 18Mar00=======================================================================
1742 1. fixed convkeps.pl so that it accepts more formats for floating point.
1743 08Mar00=======================================================================
1744 1. tidied up Sun.pm and sh/sat
1745 2. fixed sh/qra so that the correct lat/long is displayed if only one locator
1746 is given.
1747 10Jan00=======================================================================
1748 1. added Steve Franke's new Sun.pm and show/satellite command
1749 08Jan00=======================================================================
1750 1. really removed the restriction on 0 length messages.
1751 2. added a periodic msg file import system a la FBB. Stick one or more files
1752 into /spider/msg/import with a suitable SEND line, subject and the text and 
1753 it will import it. The importer will accept some BBS syntax (eg < GB7TLH) to
1754 allow you to customise the 'from' callsign.
1755 03Jan00=======================================================================
1756 1. changed the copyright statement in sh/version!
1757 2. added sh/date with special "be compatible with ak1a" syntax for the output
1758 of sh/date with no arguments, otherwise the same as sh/time. A special favour
1759 to G4PDQ...
1760 3. and another one, added show/node especially for G4PDQ.
1761 01Jan00=======================================================================
1762 1. Fixed Julian routines to get rid of the millenium bug! (do as I say, not
1763 as I do!).
1764 2. updated gdx.pl so that external programs can do a sh/dx just as a normal
1765 user can. On reflection this could be used as a model for all sorts of 
1766 "external" interface routines.
1767 3. renamed gdx.pl as showdx.
1768 11Dec99=======================================================================
1769 1. added missing pc48 so that it calls the DXDb::process routine 
1770 10Dec99=======================================================================
1771 1. allow msgs to marked as read or unread
1772 02Dec99=======================================================================
1773 1. DX command doesn't recognise '6M' as '6m' in SH/DX ON 6M.
1774 2. set/node now sets the homenode as the callsign.
1775 3. changed the label for the 18Mhz band from '18m' to '17m' in the bands 
1776 table. 
1777 01Dec99=======================================================================
1778 1. started the callbot which lives at n2tly.dxcluster.net 9000.
1779 2. added www.qrz.com
1780 3. added www.buck.com
1781 4. added k4ute at no4j.com
1782 28Nov99=======================================================================
1783 1. fixed all the stupid errors introduced in 1.36 confusing DXUser->get with
1784 DXCluster->get_exact.
1785 24Nov99=======================================================================
1786 1. extended badmsg.pl stuff so that it works like the forward file and allows
1787 one to reject on to, from, origin and subject fields.
1788 2. added a swop.pl again in a forward.pl like format that allows simple swop
1789 for a field or test on a field and set another.
1790 3. Fixed the problem that read private mail follows you around as well as
1791 unread private mail does.
1792 4. Change the logic of connections so that the node will accept callsigns with
1793 SSIDs to -8 as different entities from each other. SSIDs > 8 are subtracted 
1794 from 15 and are assumed to be coming in via netrom diddled connections. This
1795 affects lots of the commands as well. I may not have got them all.
1796 5. Hangup clients on HUP signals. I originally ignored them, for reasons that
1797 are now lost in the mists of time. HUP signals now cause clients to die 
1798 (cleanly) and disconnect everything correctly.
1799 6. Added show/time command
1800 21Nov99=======================================================================
1801 1. lose extraneous rubbish after the callsign as sent by BBSes.
1802 2. Change end label on sh/moon to RGain dB rather than Loss dB.
1803 3. Remove spurious call to DXCluster->get_exact in pc50.
1804 4. Allow rcmd to locally connected nodes that are not (for some reason) in the
1805 nodes table.
1806 5. Try and send a PC39 in more cases to a cluster that I want to disconnect
1807 from in the hope that it notices and disconnects its end.
1808 20Nov99=======================================================================
1809 1. Added set/unset logininfo which will tell anybody that has this set when
1810 someone has either logged in or out of this node.
1811 2. Added set/pinginterval command which alters the length of time between
1812 pings sent to nodes, the value is minutes < 120 and seconds above that, 0
1813 means disable pinging (not recommended).
1814 3. If someone does a sysop whilst connected via ax25, don't show privilege
1815 level or passwd in stat/user.
1816 4. Fixed the problem with the dx command where if the callsign ended in a ?
1817 then the call and the freq would be replicated in the remarks.
1818 5. Set/unset ann, dx, talk, beep, wx, wwv all are now permanent (ie stored in
1819 the user file)
1820 19Nov99=======================================================================
1821 1. Added new version of sh/sun and also sh/moon from Steve K9AN
1822 2. Added rtt to who.
1823 3. added Aliase for show/tnc_sta to who.
1824 4. added Alias for show/uptime to sh/cl 
1825 18Nov99=======================================================================
1826 1. Added ping obs counter together with Time::HiRes timers. This will dis-
1827 connect nodes that fail to respond to 3 ping requests (on the 4th attempt). 
1828 The default time is a ping every 3 mins, therefore a link will be struck out
1829 after 12 minutes of nil response.
1830 2. Maintain a table of outstanding connects to other nodes and prevent over-
1831 laps (special favour to G0RDI).
1832 17Nov99=======================================================================
1833 1. Started using Data::Dumper for things again
1834 2. 'Fixed' DXUser file corruption?
1835 3. Allow multiline (ie lines with \n in them) output in $DXChannel::send 
1836 4. Added Andrew K9CW's updated wpxloc.raw, regenerated prefix_data.pl
1837 5. Put in callsign matching and stuff into sh/sun.
1838 14Nov99=======================================================================
1839 1. added BBS.pm to start BBS input of mail
1840 2. fixed eval in DXUser to log errors rather than banging out
1841 12Nov99=======================================================================
1842 1. added sh/sun command kindly supplied by Steve K9AN.
1843 2. allow ^Z on its own on a line to terminate a message
1844 08Nov99=======================================================================
1845 1. added spoofing (mk1 version) for sysops, useful for those little jobs like
1846 reseting a user's qra locator and such like "spoof g7brn set/qra jo02lq".
1847 2. fixed set/location so it stores the qra locator in the qra locator slot, 
1848 NOT the lat/long (who wrote this stuff...?).
1849 07Nov99=======================================================================
1850 1. reduced the amount of stuff compared against for dup announces.
1851 2. Check the regex for DK0WCY announces produces results before storing it as
1852 a WWV.
1853 3. Added some logging for set/priv (un)set/lockout.
1854 4. Added test long path calc to sh/muf
1855 5. Only wonder down the msg queue every minute
1856 6. Put in the initial DB code (at last), you can create and remove local and
1857 standard remote dbs, you can import AK1A style .FUL ascii databases, you can
1858 enquire on a local or remote database.
1859 7. A return ping to a node will clear down all outstanding pings to
1860 that node (which might cause some confusion if more then one ping is
1861 outstanding for a node, but then - shit happens).
1862 04Nov99=======================================================================
1863 1. Removed ~ from the end of the PC18.
1864 2. Removed a hangover from duff character checking in cluster.pl
1865 3. Stop PC frames that are to be routed, being routed back to themselves.
1866 03Nov99=======================================================================
1867 1. Simplified command caching so it uses anonymous subroutines, you should
1868 also get error messages back on the console now when developing.
1869 2. Allow locally connected AK1A clusters that for some obscure reason don't
1870 issue PC19s to still appear as connected and allow them to acquire users.
1871 31Oct99=======================================================================
1872 1. updated Minimuf.pm and show/muf.pl to the fixed versions sent to me by
1873 Steve Franke K9AN. 
1874 2. Made set/badnodes work, added show/badnodes. This is an interim fix until
1875 input spot filtering works.
1876 24Oct99=======================================================================
1877 1. fixed announces so that nodes only get one of them (not two).
1878 2. Altered the select timeouts to prevent apparent excessive CPU usage on
1879 multiprocessor machines (or at least that is what seems to be the trouble
1880 here). 
1881 22Oct99=======================================================================
1882 1. allow filter CALLSIGNS to be in upper or lower case.
1883 2. create the concept of input and output filters, input filters are of the 
1884 form "in_$call.pl" eg: "in_g1tlh.pl" (or "in_G1TLH.pl"), output filters are 
1885 "g1tlh.pl" (or "G1TLH.pl").
1886 3. all users can now filter on spots, ann and wwv (assuming the sysop has set
1887 the filters up - still no user creatable filters. Nodes can filter on both
1888 input for announces and output for all of these. I would recommend setting 
1889 up a few filters that are likely to be wanted and then symlinking callsigns
1890 to them as you get requests.
1891 4. added callsign and length of history/position of screen stats to console.
1892 If you want to change the colour of the callsign you will need to copy the
1893 Console.pm to your /spider/local directory and change the $mycallcolor equate.
1894 21Oct99=======================================================================
1895 1. fixed reply so that reply b or reply nop generate a bulletin with the 
1896 correct address.
1897 2. implemented sh/muf command.
1898 3. reduced privilege of catchup and uncatchup to 5. This so that, suitably
1899 privileged, nodes that occasionally link can rcmd a "catchup <nodecall> all"
1900 to the node they are connecting to and thus prevent a large tranche of, 
1901 potentially duplicate, mail. This isn't an issue for DXSpider, but may be
1902 an issue for any AK1A clusters you are connected to.
1903 20Oct99=======================================================================
1904 1. Translated all the subroutines of minimuf into perl as Minimuf.pm
1905 2. Limited the length of an ANN that is saved for de-duping to $pc12_dup_lth
1906 (def 72)
1907 3. help command should now return stuff that you expect.
1908 4. reduced necessary privilege to use 'MSG' command to 6.
1909 5. Correct the count of spots and wwv for a merge.
1910 6. Allow decodes of DK0WCY-3 WWV data beacon announces
1911 7. rewrote send so that an SB doesn't send a buckshee bull to NOPRIVATE!
1912 8. Changed default colouration on console so that all spots >= 50Mhz are red
1913 9. Fixed init command so that PC21s are sent down non-initted channels
1914 10. Allow forwarding of unknown private mail. This means that you can set up
1915 forwarding of 'foreign' mail across to and by gateways using the same 
1916 mechanism as bulletins (/spider/msg/forward.pl).
1917 11. Allow line wrapping on the console (G0RDI, G0VGS et al).
1918 18Oct99=======================================================================
1919 1. changed help command so that it works correctly with multiple title lines.
1920 2. added to address to the list of things a message checks to see whether it
1921 is a duplicate (how on earth did it take _this_ long to find this one?).
1922 3. Changes S CC so that the callsign it says it has sent to is the real one
1923 (request from G8TIC)
1924 21Sep99=======================================================================
1925 1. allow zero messages to be stored (request from G4PDQ)
1926 2. make DX more flexible and change spotter syntax to be consistant with
1927 sh/dx (request from K9AN)
1928 30Aug99=======================================================================
1929 1. remove -@ as well as \d from SSIDs for spots
1930 2. remove WEB and/or NET from the front or rear of callsigns in Prefix.pm
1931 29Aug99=======================================================================
1932 1. Added msg command to allow the changing of To, From, Subject and so on the
1933 messages. This seems particularly important just now as a whole raft of G3's
1934 seem to be putting out non private bulls to callsigns.
1935 2. While I am at set messages to TO fields that appear to be users to private
1936 if they have been sent as bulls.
1937 3. Add DISTROs, if a callsign field appears in /spider/msg/distro in upper
1938 use that as a list of callsigns to send further. Note this is potentially
1939 recursive as callsigns in a distro can be distros.
1940 25Aug99=======================================================================
1941 1. check the date of a WWV much more carefully.
1942 24Aug99=======================================================================
1943 1. Prevented spots with lowercase callsigns being forwarded. This opens a
1944 much bigger can of worms which I shall have to address later.
1945 17Aug99=======================================================================
1946 1. all protocol except PC29 containing %XX characters will be dumped.
1947 2. Changed console.pl so that if you start typing it moves the top window
1948 back to the bottom.
1949 19Jul99=======================================================================
1950 1. Added iota and qra clauses to sh/dx as well, these take optional arguments
1951 and will look for the appropriate strings.
1952 17Jul99=======================================================================
1953 1. Started database integration.
1954 2. added qsl clause to sh/dx that searches for qsl or via in the dx info
1955 16Jul99=======================================================================
1956 1. drop frames with 'illegal' characters in them (but pass frames with 
1957 embedded %XX characters).
1958 15Jul99=======================================================================
1959 1. Changed grepdbg to accept a regexp. More useful (to me anyway).
1960 2. Altered init command so that it doesn't send PC21s down the initted 
1961 channel.
1962 10Jul99=======================================================================
1963 1. added an explicit disconnect from my side for already connected calls. This
1964 appears to have fixed a problem where if two consoles connect at the same time
1965 with the same (sysop?) callsign the cluster would stop.
1966 2. added some debugging in the Message handler to allow more state to be seen.
1967 3. Message handler now seems to work better for longer and doesn't spew out
1968 PC42 aborts with quite such gay abandon.
1969 05Jul99=======================================================================
1970 1. added stat/msg and stat/cluster commands to allow me to poke about inside
1971 the msg and cluster node tables.
1972 04Jul99=======================================================================
1973 1. removed silly 'new message has arrived' to connected nodes 
1974 2. added a ! command to the console.pl program; works like the bash shell.
1975 01Jul99=======================================================================
1976 1. Altered priv to 5 for connect.pl to match disconnect for nodes
1977 29Jun99=======================================================================
1978 1. fixed merge command that I broke.
1979 2. added some randomness in waittimes for aborted outgoing messages 
1980 3. Message Queuing now only occurs every 5 minutes (configurable if anyone 
1981 wants to write the command for doing it) and on receipt of a PC16. This is
1982 a further attempt at sorting the crossing of messages!
1983 4. a PC33 will cause another attempt at queuing. If you are on a roll, keep
1984 going!
1985 28Jun99=======================================================================
1986 1. console.pl now works with history and editting.
1987 2. added scrolling to stuff sent by the cluster.
1988 3. added colours to things.
1989 27Jun99=======================================================================
1990 1. added WWV filtering
1991 2. added timeouts to for forwarding Messages, also added a waiting time for
1992 failed (stalled) outgoing messages.
1993 3. Incoming messages will now have priority over outgoing messages to the
1994 same node.
1995 4. Added 'catchup' command which will 'catchup' messages to date for a node. 
1996 This means that when you start forwarding to a node, it doesn't get all the
1997 messages queued up that are probably old.
1998 5. added 'uncatchup' which does the opposite of the above.
1999 6. fixed kill full and PC49 handling so that it actually works.
2000 7. Fixed local aliases so they add to the front of the standard ones. This
2001 means you only need to add your specials or override the system ones you need
2002 to.
2003 21Jun99=======================================================================
2004 1. changed regex for cluster->client msgs so that strings like |---| are no
2005 longer ignored.
2006 20Jun99=======================================================================
2007 1. prevented a merge to myself (causes a loop)
2008 18Jun99=======================================================================
2009 1. fixed a problem with DXLogPrint repeating log entries.
2010 2. altered the permissions on disconnnect so that priv 5 users can disconnect
2011 clusters, but still require priv 8 to disconnect users.
2012 3. made sure that an incoming PC18 clears out all the cluster info for
2013 that channel before re-initialising.
2014 4. add init command.
2015 5. disconnect users before nodess on shutdown
2016 15Jun99=======================================================================
2017 1. added grepdbg program (so you can search your debug files and get times
2018 and dates of incidents).
2019 2. Moved DXVars.pm to DXVars.pm.issue to force new users to cp it to their
2020 local directory.
2021 3. added $allowzero to DXProt to allow thru PC19s with zero protocol versions.
2022 14Jun99=======================================================================
2023 1. changed IO::File in help and apropos to IO::File
2024 2. added a check for isa('DXNode') for PC50s
2025 08Jun99=======================================================================
2026 1. Started work on the curses based operator console.
2027 03Jun99=======================================================================
2028 1. cluster seems to have a memory leak, put DESTROY functions in where 
2029 appropriate.
2030 2. try to make sure that PC21 commands are not issued inappropriately and
2031 also reformat PC19 for onward broadcast so that nodes coming in on loops are
2032 dropped from those broadcasts.
2033 3. make sure PC16,17,19,21 doen't affect locally connected nodes.
2034 4. Changed all instances of FileHandle to IO::File.
2035 01Jun99=======================================================================
2036 1. removed a output of an unwanted pc21 for isolated nodes
2037 31May99=======================================================================
2038 1. Added checking for PC16,17,19 and 21 to make sure that they come in from
2039 the channels that they are supposed to.
2040 2. Pass the RCMDing node's priv level to the command (rather than the 
2041 connecting node's privilege level).
2042 3. Pass thru merge requests for other nodes.
2043 4. Removed a warning from client.pl
2044 5. routed external DB commands and drop them (for now) locally
2045 6. routed external mail commands (ie those addressed elsewhere)
2046 7. routed external PC26/27 lines 
2047 25May99=======================================================================
2048 1. try to make the lastin value correct even for local users
2049 2. got rid of the stupid bug that failed to print out the offline message
2050 but put a "*main::STDOUTmain" for every line of that message instead.
2051 3. Ported to 5.00503 (well actually just installed it and it just runs). 
2052 4. Added who command
2053 23May99=======================================================================
2054 1. Got rid of some of the useless error messages on global destruction when
2055 quiting a program.
2056 2. Stuck -w back on client.pl
2057 23May99=======================================================================
2058 1. tried to change connection to raw mode for cluster connections
2059 2. sh/c and sh/u are now sorted in alphabetical order
2060 3. Limited the number of queued dx spots when composing messages to 20 (the 
2061 oldest one is lost for every one added above 20).
2062 4. Added generalised shell globbing everywhere I think it is useful, including
2063 sh/dx, dir, sh/files etc
2064 5. Made dir more compatible with ak1a and added 'to' and 'from' call searching
2065 it should now do everything that ak1a does except counts.
2066 6. added similar functionality to kill command so that you can kill ranges, to
2067 and from callsigns etc.
2068 22May99=======================================================================
2069 1. added check for -1 from Date::Parse and return undef for out of range dates
2070 2. added show/files and type commands
2071 21May99=======================================================================
2072 1. made set/nodx work again.
2073 2. made dx stuff queue nicely again when sending messages.
2074 18May99=======================================================================
2075 1. Added announce dup checking.
2076 2. Added system announce filtering.
2077 08May99=======================================================================
2078 1. Added a bit more checking to the rcmd thing to make more sure that this
2079 rcmd isn't coming from an imposter. Not possible to prevent everything 
2080 ofcourse, just make it a bit harder.
2081 2. altered set/lockout and set/privilege so that they can't executed remotely.
2082 3. Added some code to reject rubbish (with invalid binary characters) protocol
2083 or user lines as input.
2084 4. prevented PC command being executed remotely :-)
2085 05May99=======================================================================
2086 1. change the connection overlap from an abort to a disconnect.
2087 02May99=======================================================================
2088 1. Added the mechanism for doing user spot filtering for spots in the cluster 
2089 (no user control just yet - but sysops can do it).
2090 2. Fixed problem with nodes sending out the node lists of isolated nodes.
2091 30Apr99=======================================================================
2092 1. Try to make it even more AK1A friendly by putting the node list out in the
2093 'correct' order.
2094 2. added code so that local users and commands go to all connected nodes 
2095 INCLUDING the isolated ones.
2096 26Apr99=======================================================================
2097 1. added set/user command as a hack, please use this with care, there is
2098 very little checking.
2099 2. added export_opernam.pl which is a basic reader of AK1A opernam.dat files
2100 to stdout
2101 25Apr99=======================================================================
2102 1. Fixed problem with filtered spots not coming out.
2103 2. Added the possibility of filtering on channel callsign
2104 20Apr99=======================================================================
2105 1. altered order of undefing and closing of user file in an attempt to make 
2106 corruptions/missing users less likely.
2107 2. made messages that are addressed to the node call appear to the alias call
2108 3. check dates much more rigourously.
2109 4. ignore SIGTERM and SIGINT during shutdown of the cluster
2110 15Mar99=======================================================================
2111 1. added $actiondata to filter line to allow per action data such as no of hops
2112 2. fixed a silly problem in talk for non-existant callsigns
2113 3. Added sysop command
2114 02Mar99========================================================================
2115 1. Changed DXUser so that it uses a homemade import/export hash routine 
2116 2. DXUser now uses a DB_BTREE file
2117 3. Added export_users.pl, import_users.pl and convert_users.pl
2118 25Feb99========================================================================
2119 1. added NL language stuff.
2120 2. added set/language
2121 21Feb99========================================================================
2122 1. Allowed multiple 'on <freq>' for show/dx
2123 2. Made sure the 'on 20m/ssb' thing worked (also 'on hf/cw').
2124 3. first cut of the Filtering code, no user commands yet but the file
2125 format is defined and manually added filters should work for spots
2126 17Feb99========================================================================
2127 1. added export_user.pl to export user files (for interest and safety)
2128 2. changed DXUser::init to allow O_RDONLY access which may limit the number
2129 of coredumps G0RDI seems to get.
2130 15Feb99========================================================================
2131 1. Added msg forwarding code which uses $main::root/msg/forward.pl.
2132 14Feb99========================================================================
2133 1. Changed A & K in WWV to be the other way around (I am told by G3IOR that
2134 this will mean that we won't have pole to pole aurora nor all the power lines
2135 overloading everywhere as well as a result of having values of K > 10).
2136 2. allow the '~' character in message bodies.
2137 3. Moved $main::data/badmsg.pl to $main::root/msg/badmsg.pl.
2138 11Feb99========================================================================
2139 1. Fixed a problem with isolated nodes' configurations being sent on sending 
2140 local configs to new connections.
2141 08Feb99========================================================================
2142 1. added a $SIG{ALRM} in the client to actually catch the alarm when it goes 
2143 off which means that the netrom/ax25 call programs terminate properly (and not
2144 loop as fast as their little legs can paddle, soaking up CPU time).
2145 2. Implemented read receipts as an especial request from G4PDQ.
2146 3. Fiddled with DXUser a bit to see whether I can stop it core dumping on new
2147 users in PC16s on G0RDI's machine.
2148 4. Added E4 (Palestine) to Prefix data.
2149 30Jan99========================================================================
2150 1. Some of the dates we get can cause crashes, tried to make it more robust (oh
2151 and Y2K compliant)
2152 2. PC16 seem to come in with missing callsigns from somewhere
2153 3. added $main::data/baddx.pl which prevents callsigns that are in the list being
2154 a) forwarded b) stored and c) (except for the originator, if local) being
2155 displayed locally.
2156 4. added $main::data/badmsg.pl which deletes any messages whose TO address is
2157 in this list (this is largely for european sensibilities). 
2158 18Jan99========================================================================
2159 1. added present(),presentish() and disconnect() to DXCron so that you can see 
2160 (easily) if a station is on the cluster anywhere and also disconnect them
2161 locally. 
2162 2. added rcmd() to DXCron so you can send an rcmd to someone else from crontab.
2163 3. <embarrassment>Fixed create_sysop.pl so that longitude is spelt correctly
2164 there as well</embarrassment> made the update work properly. NOTE create_sysop
2165 will only do what you expect if all cluster.pl and client.pl programs are 
2166 stopped.
2167 4. DXCron wasn't reading in reliably on startup, this is now (hopefully) fixed.
2168 the -M semantics are rather strange!
2169 5. The -w switch is now standard on cluster.pl
2170 6. Added last_connect() which gives the last connect time of a user (or now
2171 if connected).
2172 7. Added present_on(call, node) and presentish_on(ditto) which returns true if 
2173 the call is connected to the node.
2174 8. incoming messages for users will now send a 'new message' message (instead
2175 of merely generating the message)[who wrote this rubbish?].
2176 9. Hooked $SIG{__WARN__} and $SIG{__DIE__} so we store these nasty error 
2177 messages.
2178 10. Print the no of users on restricted protocol links if we have had PC50
2179 11. Had a go at making the sh/cl stats more accurate.
2180 12. PC11 was trying to call Local::spot1 instead of Local::spot, no warning 
2181 previously.
2182 13. Added a simple lockfile to prevent more than one cluster running at a time
2183 17Jan99========================================================================
2184 1. fixed some permission problems on DXLog.
2185 2. There is a circumstance in DXMsg which caused the cluster to stop on an 
2186 null ref pointer which I can't get to the bottom of but have bandaided out 
2187 for now.
2188 3. Started filter and Database code.
2189 4. Upper cased all the TO callsigns for sending to more than one station in
2190 messages.
2191 07Jan99========================================================================
2192 1. Fixed Geomag after emacs reformatted it wrong so sh/wwv works again.
2193 2. Added more range checking in WWV spots (they really are a heap of ...)
2194 3. Changed create_sysop.pl so that you can update as well as create the user 
2195 file
2196 4. Remove spotter's SSID from WWV spots
2197 06Jan99========================================================================
2198 1. Do some range checking for spots and WWV in the future (got a WWV for Oct 
2199 2034 whhich caused a bit of confusion!)
2200 2. Make WWV spots broadcast them to the users! (as opposed to merely storing 
2201 them)(thank you G0RDI).
2202 3. Allow users to do show/announce (thank you JE1SGH).
2203 4. Delay broadcasts to users if they are not in a 'prompt' state (means you can
2204 add messages and see what you are doing on a busy system)
2205 5. Made set/unset dx,ann,wx,talk,wwv do what is expected
2206 6. added set/sys_location and set/set_qra to set the cluster lat/long and qra
2207 7. New messages will now be announced on logon (if there are any)
2208 03Jan99========================================================================
2209 1. Upped the version no !!!!
2210 2. made the DXProtocol routines much less sensitive to '~' characters (JE1SGH)
2211 3. added '^' -> ':' conversions on ann, talk and dx commands
2212 4. You can now send messages containing blank lines.
2213 5. Fixed merge command problem reported by G0RDI
2214 28Dec98========================================================================
2215 1. Crossed fingers, got rid of the instabilities caused by execing programs
2216 at vast speed (reduced it significantly anyway).
2217 2. Personals will now move if homenode is known.
2218 3. Added Local.pm for doing local specials
2219 27Dec98========================================================================
2220 1. Various detail changes to remove some more warning with -w on
2221 2. Added DXCron handling - you can do crontabs now.
2222 3. Added show/program command so you can see where it is loading your .pm files
2223 from.
2224 4. Added pc26/27 replies to locally connected cluster's merge (pc25) requests
2225 5. Added spotters DXCC and original cluster to Spot data files.
2226 23Dec98========================================================================
2227 1. Reindented various things
2228 2. Added missing $main::mycall on the end of outgoing PC11s (!)
2229 3. Check that PC16/17 node calls really are nodes (AFAIAC).
2230 22Dec98========================================================================
2231 1. Added brackets round callsign if not here for prompt
2232 2. Added Iain's set/password routine
2233 3. Fixed sh/dx problems (the xemacs indent region messed Spot.pm up!)
2234 4. Issued 1.15
2235 21Dec98============= late! ====================================================
2236 1. fixed problem with missing DXDebug in DXProt.
2237 2. Fixed DXDebug so that it actually works as advertised with and without 
2238 trailing \n. 
2239 3. Added deduping of WWV spots as well (at for date,time,sfi,k and i) dups
2240 4. Replaced the 0 in "02-Dec-1998" with ' ' so it reads " 2-Dec-1998", it seems
2241 hard to credit it but some 'programs' out there that connect to clusters have
2242 problems with the leading '0'!
2243 5. In the same vain, included a strictly AK1A compatible sh/heading, apparently
2244 this is necessary for the same reason as 4.
2245 6. Started contrib tree stored the old show/heading in contrib/g0rdi/show.
2246 7. Because I now correctly dedupe spots and wwv (there's a hostage to fortune..)
2247 I have added a merge command. 
2248 21Dec98========================================================================
2249 1. Added "issue" to the client program for 'login' connections
2250 2. Added more docs for client program.
2251 3. Fixed problem introduced in 1.12 where a connect locally with a callsign of
2252 someone connected remotely would stop the cluster.
2253 4. issue release 1.13
2254 20Dec98========================================================================
2255 1. Removed all the warnings I get with perl -w (at least for just starting the
2256 cluster and running a few commands).
2257 2. Added per node hop control.
2258 3. Added some docs on how to use it and isolation
2259 4. Made talk command more intelligent in that if the user isn't seen and the
2260 user's last node is visible it tries the talk anyway.
2261 19Dec98========================================================================
2262 1. Fixed problems with sh/rcmd (talk/ann/log) with a callsign as argument and
2263 also made what G0RDI wanted work as well!
2264 2. Added isolate flag to allow isolation of different networks at a gateway.
2265 3. Changed make Makefile.PL to perl Makefile.PL in instructions
2266 4. Copied latest instructions to html directory
2267 5. Had another attempt at making clients disconnect without hanging everytime.
2268 6. Changed msg queuing semantics so that the system routes on exact callsign.
2269 7. Changed the protocol version so that it increments with the DXSpider version.
2270 14Dec98========================================================================
2271 1. Made the telnet thing work a bit better. It still will not work reliably to
2272 a real telnetd on port 23.
2273 2. Allowed network logins on client by specifying login instead of call.
2274 3. made msg handling more robust (PC30 with unknown streams cause PC42), queueing
2275 is only done on channels that are in state 'normal'.
2276 4. Added pc command which takes a callsign and some text and sends it without
2277 mods to the callsign, useful for sending manual PC protocol to unstick things.
2278 Also for sending anonymous messages to online users.
2279 5. Stopped duplicate messages being stored (it receives them and then bins them)
2280 6. Implemented PC49 delete/full from outside (kill full on the inside)
2281 7. Implemented the client command in connect scripts so that you can have 
2282 different scripts for the same callsign.
2283 8. Added sh/wwv command
2284 13Dec98========================================================================
2285 1. Fixed VS6 lat/long in prefix_data and wpxloc.raw
2286 2. Sorted out last in times for remote users
2287 3. editted and substitued G0RDI's version of the install instructions over
2288 mine in spider/html
2289 4. fixed telnet connections
2290 5. added connect instructions to html tree.
2291 6. Added some more help
2292 7. Upissued version
2293 12Dec98========================================================================
2294 1. Incorporated sh/st, (un)set/lockout, forward/opername from Iain G0RDI
2295 2. Added group handling with (un)set/group, show/group. This allows arbitrary
2296 groups to be formed (for ann/<group> for example) and is also used to 'filter' 
2297 spots, announces, wwvs etc into groups of cluster nodes (useful for creating 
2298 disjoint cluster networks)
2299 3. **** CHANGE mylongtitude to mylongitude in DXVars.pm ****
2300 4. Altered QRA locator routines so they work correctly!
2301 5. Fixed all commands that had the wrong mylat(itude) and mylong(itude) names
2302 in.
2303 07Dec98========================================================================
2304 1. Added set/name, set/qra, set/location, set/qth, set/homenode, set/bbs, 
2305 set/email
2306 2. changed the Msg socket close to a shutdown (hopefully more reliable), this 
2307 should stop clients hanging on exit.
2308 3. Added Alias support for help
2309 4. Added lltos and stoll routines to DXBearing
2310 5. Added auto prompting for name, qth, location and homenode if any of these
2311 aren't known.
2312 06Dec98========================================================================
2313 1. Fixed DXBearing::is_qra so that it correctly detects full QRA locators
2314 2. Added sh/qra for doing locator distances and bearings
2315 3. Added some stuff to Notes.txt on hints for command writers
2316 4. Changed help system to use just one file per language
2317 5. Started adding more help
2318 6. Fixed 24Mhz band limits
2319 7. Added apropos command and lots of new help text
2320 05Dec98========================================================================
2321 1. Added sh/heading and QRA locator calculation stuff
2322 04Dec98========================================================================
2323 1. Started Changes file
2324 2. Added load/cmd_cache.pl to clear cmd cache shortcuts (use this if cluster.pl
2325 get confused about where it is getting its commands from eg if you have
2326 removed a file from local_cmd 'cos you want to go back to standard one)
2327 3. Fixed bull handling at least to the extent that it stores them and
2328 doesn't mess up the normal directory handling.
2329 4. Fixed the unset/debug command so that it actually does the job!
2330 5. Removed the middle line 'written in perl for unix' from show/version.pl