use Route::Node;
use Script;
use DXProtHandle;
+use DXCIDR;
+
+use Time::HiRes qw(gettimeofday tv_interval);
+use DXSubprocess;
use strict;
%pc92_find $pc92_find_timeout $pc92_short_update_period
$next_pc92_obs_timeout $pc92_slug_changes $last_pc92_slug
$pc92_extnode_update_period $pc50_interval
- $pc92_keepalive_period
+ $pc92_keepalive_period $senderverify $pc92_ad_enabled
+ $pc92c_ipaddr_enable
);
$pc11_max_age = 1*3600; # the maximum age for an incoming 'real-time' pc11
$pc92_keepalive_period = 1*60*60; # frequency of PC92 K (keepalive) records
%pc92_find = (); # outstanding pc92 find operations
$pc92_find_timeout = 30; # maximum time to wait for a reply
-
+$senderverify = 0; # 1 = check spotter is on node it says it is and check ip address if available
+; # 2 = do 1 and dump if check
+$pc92_ad_enabled = 1; # send pc92 A & D records.
+$pc92c_ipaddr_enable = 0; # add the local ip address info to each callsign in a PC92 C
@checklist =
(
sub init
{
- do "$main::data/hop_table.pl" if -e "$main::data/hop_table.pl";
+ my $fn = localdata("hop_table.pl");
+ do $fn if -e $fn;
confess $@ if $@;
my $user = DXUser::get($main::mycall);
$main::me->{version} = $main::version;
$main::me->{build} = $main::build;
$main::me->{do_pc9x} = 1;
+ $main::me->{hostname} = $main::clusteraddr;
$main::me->update_pc92_next($pc92_short_update_period);
$main::me->update_pc92_keepalive;
}
# log it
my $host = $self->{conn}->peerhost;
$host ||= "AGW Port #$self->{conn}->{agwport}" if exists $self->{conn}->{agwport};
+ $host ||= $host if is_ipaddr($host);
$host ||= "unknown";
-
+ $self->{hostname} = $host if is_ipaddr($host);
Log('DXProt', "$call connected from $host");
# remember type of connection
}
}
+ my $origin = $self->{call};
+
if (defined &Local::pcprot) {
my $r;
- eval { $r = Local::pcprot($self, $pcno, $line, @field); };
+ eval { $r = Local::pcprot($self, $pcno, $line, $origin, \@field); };
return if $r; # i.e don't process it
}
# send it out for processing
- my $origin = $self->{call};
no strict 'subs';
my $sub = "handle_$pcno";
if ($main::systime - 3600 > $last_hour) {
$last_hour = $main::systime;
}
+
+ pc11_process();
}
#
foreach $dxchan (@dxchan) {
next if $dxchan == $main::me;
next if $dxchan == $self && $self->is_node;
+ next if $dxchan == $self;
+ next if $dxchan->is_rbn;
if ($line =~ /PC61/ && !($dxchan->is_spider || $dxchan->is_user)) {
unless ($pc11) {
my @f = split /\^/, $line;
foreach $dxchan (@dxchan) {
next if $dxchan == $main::me;
next if $dxchan == $self && $self->is_node;
+ next if $dxchan->is_rbn;
my $routeit;
my ($filter, $hops);
foreach $dxchan (@dxchan) {
next if $dxchan == $main::me;
next if $dxchan == $self;
+ next if $dxchan->is_rbn;
$dxchan->wcy($line, $self->{isolate}, @_, $self->{call}, @dxcc);
}
}
Log('ann', $target, $from, $text);
+ AnnTalk::add_anncache('ann', $target, $from, $text);
# send it if it isn't the except list and isn't isolated and still has a hop count
# taking into account filtering and so on
next if $dxchan == $self && $self->is_node;
next if $from_pc9x && $dxchan->{do_pc9x};
next if $target eq 'LOCAL' && $dxchan->is_node;
+ next if $dxchan->is_rbn;
$dxchan->announce($line, $self->{isolate}, $to, $target, $text, @_, $self->{call},
@a[0..2], @b[0..2]);
}
next unless $dxchan->is_spider && $dxchan->do_pc9x;
next if $target eq 'LOCAL';
}
+ next if $dxchan->is_rbn;
$dxchan->chat($line, $self->{isolate}, $target, $_[1],
$text, @_, $self->{call}, @a[0..2], @b[0..2]);
my @remotenodes;
if ($self->{isolate}) {
- dbg("send_local_config: isolated");
+ dbg("$self->{call} send_local_config: isolated");
@localnodes = ( $main::routeroot );
$self->send_route($main::mycall, \&pc19, 1, $main::routeroot);
} elsif ($self->{do_pc9x}) {
- dbg("send_local_config: doing pc9x");
+ dbg("$self->{call} send_local_config: doing pc9x");
my $node = Route::Node::get($self->{call});
# $self->send_last_pc92_config($main::routeroot);
# $self->send(pc92a($main::routeroot, $node)) unless $main::routeroot->last_PC92C =~ /$self->{call}/;
# and are not themselves isolated, this to make sure that isolated nodes
# don't appear outside of this node
- dbg("send_local_config: traditional");
+ dbg("$self->{call} send_local_config: traditional");
# send locally connected nodes
my @dxchan = grep { $_->call ne $main::mycall && $_ != $self && !$_->{isolate} } DXChannel::get_all_nodes();
clear_pc92_changes(); # remove any slugged data, we are generating it as now
my @dxchan = grep { $_->call ne $main::mycall && !$_->{isolate} } DXChannel::get_all();
dbg("ROUTE: all dxchan: " . join(',', map{$_->{call}} @dxchan)) if isdbg('routelow');
- my @localnodes = map { my $r = Route::get($_->{call}); $r ? $r : () } @dxchan;
+ my @localnodes = map { my $r = Route::get($_->{call}); ($_->is_node || $_->is_user) && $r ? $r : () } @dxchan;
dbg("ROUTE: localnodes: " . join(',', map{$_->{call}} @localnodes)) if isdbg('routelow');
return pc92c($node, @localnodes);
} else {
{
my $pcno = shift;
my $hops = $DXProt::hopcount{$pcno};
- $hops = $DXProt::def_hopcount if !$hops;
+ $hops = $DXProt::def_hopcount unless $hops;
return "H$hops";
}
sub process_rcmd
{
my ($self, $tonode, $fromnode, $user, $cmd) = @_;
+
if ($tonode eq $main::mycall) {
my $ref = DXUser::get_current($fromnode);
unless ($ref && UNIVERSAL::isa($ref, 'DXUser')) {
$self->send_rcmd_reply($main::mycall, $fromnode, $user, "sorry...!");
return;
}
+ Log('rcmd', 'in', ($ref->{priv}||0), $fromnode, $cmd, $user);
my $cref = Route::Node::get($fromnode);
unless ($cref && UNIVERSAL::isa($cref, 'Route')) {
dbg("DXProt process_rcmd: Route $fromnode isn't a reference (tell G1TLH)");
$self->send_rcmd_reply($main::mycall, $fromnode, $user, "sorry...!");
return;
}
- Log('rcmd', 'in', ($ref->{priv}||0), $fromnode, $cmd);
if ($cmd !~ /^\s*rcmd/i && $ref->homenode && $cref->call eq $ref->homenode) { # not allowed to relay RCMDS!
if ($ref->{priv}) { # you have to have SOME privilege, the commands have further filtering
$self->{remotecmd} = 1; # for the benefit of any command that needs to know
my $oldpriv = $self->{priv};
- $self->{priv} = $ref->{priv}; # assume the user's privilege level
+ $self->{priv} = 1; # set a maximum privilege
+
+ # park homenode and user for any spawned command that run_cmd may do.
+ $self->{_rcmd_user} = $user;
+ $self->{_rcmd_fromnode} = $fromnode;
my @in = (DXCommandmode::run_cmd($self, $cmd));
+ delete $self->{_rcmd_fromnode};
+ delete $self->{_rcmd_user};
$self->{priv} = $oldpriv;
$self->send_rcmd_reply($main::mycall, $fromnode, $user, @in);
delete $self->{remotecmd};
}
}
+
+sub send_rcmd_reply
+{
+ my $self = shift;
+ my $tonode = shift;
+ my $fromnode = shift;
+ my $user = shift;
+ while (@_) {
+ my $line = shift;
+ $line =~ s/\s*$//;
+ Log('rcmd', 'out', $fromnode, $line, $user);
+ if ($self->is_clx) {
+ $self->send(pc85($main::mycall, $fromnode, $user, "$main::mycall:$line"));
+ } else {
+ $self->send(pc35($main::mycall, $fromnode, "$main::mycall:$line"));
+ }
+ }
+}
+
+# Punt off a long running command into a separate process - this will be caused by an rcmd from outside
+#
+# This is called from commands to run some potentially long running
+# function. The process forks and then runs the function and returns
+# the result back to the cmd.
+#
+# NOTE: this merely forks the current process and then runs the cmd in that (current) context.
+# IT DOES NOT START UP SOME NEW PROGRAM AND RELIES ON THE FACT THAT IT IS RUNNING DXSPIDER
+# THE CURRENT CONTEXT!!
+#
+# call: $self->spawn_cmd($original_cmd_line, \<function>, [cb => sub{...}], [prefix => "cmd> "], [progress => 0|1], [args => [...]]);
+sub spawn_cmd
+{
+ my $self = shift;
+ my $line = shift;
+ my $cmdref = shift;
+ my $call = $self->{call};
+ my %args = @_;
+ my @out;
+
+ my $cb = delete $args{cb};
+ my $prefix = delete $args{prefix};
+ my $progress = delete $args{progress};
+ my $args = delete $args{args} || [];
+ my $t0 = [gettimeofday];
+
+ # remembered from process_cmd when spawn_cmd was called thru DXCommandmode::run_cmd which was called by process_rcmd
+ my $fromnode = $self->{_rcmd_fromnode};
+ my $user = $self->{_rcmd_user};
+
+ no strict 'refs';
+
+ my $fc = DXSubprocess->new;
+
+ # just behave normally if something has set the "one-shot" _nospawn in the channel
+ if ($self->{_nospawn}) {
+ eval { @out = $cmdref->(@$args); };
+ if ($@) {
+ DXDebug::dbgprintring(25);
+ push @out, DXDebug::shortmess($@);
+ }
+ return @out;
+ }
+
+ # $fc->serializer(\&encode_json);
+# $fc->deserializer(\&decode_json);
+ $fc->run(
+ sub {
+ my $subpro = shift;
+ if (isdbg('progress')) {
+ my $s = qq{line: "$line"};
+ $s .= ", args: " . join(', ', map { defined $_ ? qq{'$_'} : q{'undef'} } @$args) if $args && @$args;
+ dbg($s);
+ }
+ eval { @out = $cmdref->(@$args); };
+ if ($@) {
+ DXDebug::dbgprintring(25);
+ push @out, DXDebug::shortmess($@);
+ }
+ return @out;
+ },
+# $args,
+ sub {
+ my ($fc, $err, @res) = @_;
+ my $self = DXChannel::get($call);
+ return unless $self;
+
+ if ($err) {
+ my $s = "DXCommand::spawn_cmd: call $call error $err";
+ dbg($s) if isdbg('chan');
+ if ($fromnode && $user) {
+ $self->send_rcmd_reply($main::mycall, $fromnode, $user, $s);
+ } else {
+ $self->send($s);
+ }
+ return;
+ }
+ if ($cb) {
+ # transform output if required
+ @res = $cb->($self, @res);
+ }
+ if (@res) {
+ if ($fromnode && $user) {
+ $self->send_rcmd_reply($main::mycall, $fromnode, $user, @res);
+ } else {
+ $self->send(@res);
+ }
+ }
+ diffms("rcmd from $user on $call", $line, $t0, scalar @res) if isdbg('progress');
+ });
+
+ return @out;
+}
+
sub process_rcmd_reply
{
my ($self, $tonode, $fromnode, $user, $line) = @_;
}
}
-sub send_rcmd_reply
-{
- my $self = shift;
- my $tonode = shift;
- my $fromnode = shift;
- my $user = shift;
- while (@_) {
- my $line = shift;
- $line =~ s/\s*$//;
- Log('rcmd', 'out', $fromnode, $line);
- if ($self->is_clx) {
- $self->send(pc85($main::mycall, $fromnode, $user, "$main::mycall:$line"));
- } else {
- $self->send(pc35($main::mycall, $fromnode, "$main::mycall:$line"));
- }
- }
-}
+
# add a rcmd request to the rcmd queues
sub addrcmd
{
my ($self, $from, $to, $via, $line, $origin) = @_;
+ my $ipaddr = DXCommandmode::alias_localhost($self->hostname || '127.0.0.1');
if ($self->{do_pc9x}) {
- $self->send(pc93($to, $from, $via, $line));
+ $self->send(pc93($to, $from, $via, $line, undef, $ipaddr));
} else {
$self->send(pc10($from, $to, $via, $line, $origin));
}
- Log('talk', $to, $from, '>' . ($via || $origin || $self->call), $line) unless $origin && $origin ne $main::mycall;
+ Log('talk', $to, $from, '>' . ($via || $origin || $self->call), $line, $ipaddr) unless $origin && $origin ne $main::mycall;
}
# send it if it isn't the except list and isn't isolated and still has a hop count
my $self = shift;
my $origin = shift;
my $line = shift;
+
broadcast_route_pc9x($self, $origin, \&pc92c, $line, 1, @_);
}
my $self = shift;
my $origin = shift;
my $line = shift;
+ return unless $pc92_ad_enabled;
broadcast_route_pc9x($self, $origin, \&pc92a, $line, 1, @_);
}
my $self = shift;
my $origin = shift;
my $line = shift;
+ return unless $pc92_ad_enabled;
broadcast_route_pc9x($self, $origin, \&pc92d, $line, 1, @_);
}
my $via = $target;
$via = '*' if $target eq 'ALL' || $target eq 'SYSOP';
Log('ann', $target, $main::mycall, $text);
- $main::me->normal(DXProt::pc93($target, $main::mycall, $via, $text));
+ AnnTalk::add_anncache('ann', $target, $main::mycall, $text);
+ my $ipaddr = DXCommandmode::alias_localhost($main::me->hostname || '127.0.0.1');
+ $main::me->normal(DXProt::pc93($target, $main::mycall, $via, $text, undef, $ipaddr));
} else {
DXCommandmode::send_chats($main::me, $target, $text);
}
{
}
+
+
+
1;
__END__
projects / spider.git / blobdiff