Create an 'accept this announce' line for a filter.
An accept filter line means that if the announce matches this filter it is
-passed onto the user. See HELP FILTERS for more info. Please read this
+passed onto the user. See HELP FILTERING for more info. Please read this
to understand how filters work - it will save a lot of grief later on.
You can use any of the following things in this line:-
info <string> eg: iota or qsl
by <prefixes> eg: G,M,2
origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
+ origin_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <prefixes or numbers> or: G,GM,GW
+ origin_zone <prefixes or numbers>
+ by_dxcc <prefixes or numbers>
+ by_itu <prefixes or numbers>
+ by_zone <prefixes or numbers>
channel <prefixes>
wx 1 filter WX announces
dest <prefixes> eg: 6MUK,WDX (distros)
accept/ann input node_default by G,M,2
accept/ann user_default by G,M,2
+=== 8^ACCEPT/ROUTE <call> [0-9] <pattern>^Set an 'accept' filter line for routing
+Create an 'accept this routing PC Protocol' line for a filter.
+
+An accept filter line means that if a PC16/17/19/21/24/41/50 matches this filter
+it is passed thru that interface. See HELP FILTERING for more info. Please read this
+to understand how filters work - it will save a lot of grief later on.
+
+You can use any of the following things in this line:-
+
+ call <prefixes> the callsign of the thingy
+ call_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
+ call_itu <prefixes or numbers> or: G,GM,GW
+ call_zone <prefixes or numbers>
+ origin <prefixes> really the interface it came in on
+ origin_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <prefixes or numbers> or: G,GM,GW
+ origin_zone <prefixes or numbers>
+
+some examples:-
+
+ acc/route gb7djk call_dxcc 61,38 (send only UK+EIRE nodes)
+ acc/route gb7djk call gb7djk (equiv to SET/ISOLATE)
+
+You can use the tag 'all' to accept everything eg:
+
+ acc/route all
+
+
=== 0^ACCEPT/SPOTS [0-9] <pattern>^Set an 'accept' filter line for spots
Create an 'accept this spot' line for a filter.
An accept filter line means that if the spot matches this filter it is
-passed onto the user. See HELP FILTERS for more info. Please read this
+passed onto the user. See HELP FILTERING for more info. Please read this
to understand how filters work - it will save a lot of grief later on.
You can use any of the following things in this line:-
call <prefixes> eg: G,PA,HB9
info <string> eg: iota or qsl
by <prefixes>
- call_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- call_itu <numbers>
- call_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
+ call_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
+ call_itu <prefixes or numbers> or: G,GM,GW
+ call_zone <prefixes or numbers>
+ by_dxcc <prefixes or numbers>
+ by_itu <prefixes or numbers>
+ by_zone <prefixes or numbers>
origin <prefixes>
channel <prefixes>
but this probably for advanced users...
+
=== 8^ACCEPT/SPOTS <call> [input] [0-9] <pattern>^Spot filter sysop version
This version allows a sysop to set a filter for a callsign as well as the
default for nodes and users eg:-
by <prefixes> eg: G,M,2
origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
+ origin_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <prefixes or numbers> or: G,GM,GW
+ origin_zone <prefixes or numbers>
+ by_dxcc <prefixes or numbers>
+ by_itu <prefixes or numbers>
+ by_zone <prefixes or numbers>
channel <prefixes>
There are no examples because WCY Broadcasts only come from one place and
by <prefixes> eg: G,M,2
origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
+ origin_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <prefixes or numbers> or: G,GM,GW
+ origin_zone <prefixes or numbers>
+ by_dxcc <prefixes or numbers>
+ by_itu <prefixes or numbers>
+ by_zone <prefixes or numbers>
channel <prefixes>
for example
Search the help database for <string> (it isn't case sensitive), and print
the names of all the commands that may be relevant.
+=== 0^BLANK [<string>] [<nn>]^Print nn (default 1) blank lines (or strings)
+In its basic form this command prints one or more blank lines. However if
+you pass it a string it will replicate the string for the width of the
+screen (default 80) and then print that one or more times, so:
+
+ blank 2
+
+prints two blank lines
+
+ blank -
+
+prints a row of - characters once.
+
+ blank abc
+
+prints 'abcabcabcabcabcabc....'
+
+This is really only of any use in a script file and you can print a maximum
+of 9 lines.
+
=== 0^BYE^Exit from the cluster
This will disconnect you from the cluster
Order is not important.
-=== 0^CLEAR/SPOTS [1|all]^Clear a spot filter line
+=== 0^CLEAR/ANNOUNCE [1|all]^Clear a announce filter line
+This command allows you to clear (remove) a line in a annouce filter or to
+remove the whole filter.
+
+see CLEAR/SPOTS for a more detailed explanation.
+
+=== 8^CLEAR/ANNOUNCE [input] <callsign> [0-9|all]^Clear a announce filter line
+A sysop can clear an input or normal output filter for a user or the
+node_default or user_default.
+
+=== 0^CLEAR/ROUTE [1|all]^Clear a route filter line
+This command allows you to clear (remove) a line in a route filter or to
+remove the whole filter.
+
+see CLEAR/SPOTS for a more detailed explanation.
+
+=== 8^CLEAR/ROUTE [input] <callsign> [0-9|all]^Clear a route filter line
+A sysop can clear an input or normal output filter for a user or the
+node_default or user_default.
+
+=== 0^CLEAR/SPOTS [0-9|all]^Clear a spot filter line
This command allows you to clear (remove) a line in a spot filter or to
remove the whole filter.
the filter will be completely removed.
+=== 8^CLEAR/SPOTS [input] <callsign> [0-9|all]^Clear a spot filter line
+A sysop can clear an input or normal output filter for a user or the
+node_default or user_default.
+
+=== 0^CLEAR/WCY [1|all]^Clear a WCY filter line
+This command allows you to clear (remove) a line in a WCY filter or to
+remove the whole filter.
+
+see CLEAR/SPOTS for a more detailed explanation.
+
+=== 8^CLEAR/WCY [input] <callsign> [0-9|all]^Clear a WCY filter line
+A sysop can clear an input or normal output filter for a user or the
+node_default or user_default.
+
+=== 0^CLEAR/WWV [1|all]^Clear a WWV filter line
+This command allows you to clear (remove) a line in a WWV filter or to
+remove the whole filter.
+
+see CLEAR/SPOTS for a more detailed explanation.
+
+=== 8^CLEAR/WWV [input] <callsign> [0-9|all]^Clear a WWV filter line
+A sysop can clear an input or normal output filter for a user or the
+node_default or user_default.
+
=== 5^CONNECT <callsign>^Start a connection to another DX Cluster
Start a connection process that will culminate in a new connection to the
DX cluster <callsign>. This process creates a new 'client' process which will
use the script in /spider/connect/<callsign> to effect the 'chat' exchange
necessary to traverse the network(s) to logon to the cluster <callsign>.
+=== 9^DELETE/USER <callsign> ...^Delete this user from the User Database
+This command will completely remove a one or more users from the database.
+
+There is NO SECOND CHANCE.
+
+It goes without saying that you should use this command CAREFULLY!
+
=== 0^DBAVAIL^Show a list of all the Databases in the system
Title says it all really, this command lists all the databases defined
in the system. It is also aliased to SHOW/COMMAND.
clear/spots all
+There are similar CLEAR commands for the other filters:-
+
+ clear/announce
+ clear/wcy
+ clear/wwv
+
ADVANCED USERS:-
Once you are happy with the results you get, you may like to experiment.
Create an 'reject this announce' line for a filter.
A reject filter line means that if the announce matches this filter it is
-passed onto the user. See HELP FILTERS for more info. Please read this
+passed onto the user. See HELP FILTERING for more info. Please read this
to understand how filters work - it will save a lot of grief later on.
You can use any of the following things in this line:-
info <string> eg: iota or qsl
by <prefixes> eg: G,M,2
origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
+ origin_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <prefixes or numbers> or: G,GM,GW
+ origin_zone <prefixes or numbers>
+ by_dxcc <prefixes or numbers>
+ by_itu <prefixes or numbers>
+ by_zone <prefixes or numbers>
channel <prefixes>
wx 1 filter WX announces
dest <prefixes> eg: 6MUK,WDX (distros)
Create a 'reject this spot' line for a filter.
A reject filter line means that if the spot matches this filter it is
-dumped (not passed on). See HELP FILTERS for more info. Please read this
+dumped (not passed on). See HELP FILTERING for more info. Please read this
to understand how filters work - it will save a lot of grief later on.
You can use any of the following things in this line:-
call <prefixes> eg: G,PA,HB9
info <string> eg: iota or qsl
by <prefixes>
- call_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- call_itu <numbers>
- call_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
+ call_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
+ call_itu <prefixes or numbers> or: G,GM,GW
+ call_zone <prefixes or numbers>
+ by_dxcc <prefixes or numbers>
+ by_itu <prefixes or numbers>
+ by_zone <prefixes or numbers>
origin <prefixes>
channel <prefixes>
but this probably for advanced users...
+=== 8^REJECT/ROUTE <call> [0-9] <pattern>^Set an 'reject' filter line for routing
+Create an 'reject this routing PC Protocol' line for a filter.
+
+An reject filter line means that if a PC16/17/19/21/24/41/50 matches this filter
+it is NOT passed thru that interface. See HELP FILTERING for more info. Please
+read this to understand how filters work - it will save a lot of grief later on.
+
+You can use any of the following things in this line:-
+
+ call <prefixes> the callsign of the thingy
+ call_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
+ call_itu <prefixes or numbers> or: G,GM,GW
+ call_zone <prefixes or numbers>
+ origin <prefixes> really the interface it came in on
+ origin_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <prefixes or numbers> or: G,GM,GW
+ origin_zone <prefixes or numbers>
+
+some examples:-
+
+ rej/route gb7djk call_dxcc 61,38 (everything except UK+EIRE nodes)
+
+You can use the tag 'all' to reject everything eg:
+
+ rej/route all (equiv to [very] restricted mode)
+
=== 8^REJECT/SPOTS <call> [input] [0-9] <pattern>^Spot filter sysop version
This version allows a sysop to set a filter for a callsign as well as the
default for nodes and users eg:-
by <prefixes> eg: G,M,2
origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
+ origin_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <prefixes or numbers> or: G,GM,GW
+ origin_zone <prefixes or numbers>
+ by_dxcc <prefixes or numbers>
+ by_itu <prefixes or numbers>
+ by_zone <prefixes or numbers>
channel <prefixes>
There are no examples because WCY Broadcasts only come from one place and
by <prefixes> eg: G,M,2
origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
+ origin_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <prefixes or numbers> or: G,GM,GW
+ origin_zone <prefixes or numbers>
+ by_dxcc <prefixes or numbers>
+ by_itu <prefixes or numbers>
+ by_zone <prefixes or numbers>
channel <prefixes>
for example
=== 0^SET/ANNOUNCE^Allow announce messages to come out on your terminal
=== 0^UNSET/ANNOUNCE^Stop announce messages coming out on your terminal
+=== 0^SET/ANNTALK^Allow talk like announce messages on your terminal
+=== 0^UNSET/ANNTALK^Stop talk like announce messages on your terminal
+The announce system on legacy cluster nodes is used as a talk
+substitute because the network is so poorly connected. If you:
+
+ unset/anntalk
+
+you will suppress several of these announces, you may miss the odd
+useful one as well, but you would probably miss them anyway in the
+welter of useless ones.
+
+ set/anntalk
+
+allows you to see them again. This is the default.
+
=== 5^SET/ARCLUSTER <call> [<call>..]^Make the callsign an AR-Cluster node
-=== 8^SET/BADDX <call>..^Stop words we do not wish to see in the callsign field
-of a dx spot being propagated
-=== 8^UNSET/BADDX <call>..^Allow a word to be seen again in a DX spot
-Setting a word as 'baddx' will prevent spots with that word in the
-callsign field of a DX spot from going any further. They will not be
-displayed and they will not be sent onto other nodes.
+=== 8^SET/BADDX <call>..^Stop callsigns in a dx spot being propagated
+=== 8^UNSET/BADDX <call>..^Propagate a dx spot with this callsign again
+Setting a word as 'baddx' will prevent spots with that word in the
+'spotted' field (as in: DX 14001.1 FR0G)of a DX spot from going any
+further. They will not be displayed and they will not be sent onto
+other nodes.
-The word must be wriiten in full, no wild cards are allowed eg:-
+The word must be written in full, no wild cards are allowed eg:-
set/baddx FORSALE VIDEO FR0G
Use with extreme care. This command may well be superceded by FILTERing.
+=== 8^SET/BADWORD <word>..^Stop things with this word being propagated
+=== 8^UNSET/BADWORD <word>..^Propagate things with this word again
+Setting a word as a 'badword' will prevent things like spots,
+announces or talks with this word in the the text part from going any
+further. They will not be displayed and they will not be sent onto
+other nodes.
+
+The word must be written in full, no wild cards are allowed eg:-
+
+ set/badword annihilate annihilated annihilation
+
+will stop anything with these words in the text.
+
+ unset/badspotter annihilated
+
+will allow text with this word again.
+
=== 0^SET/BEEP^Add a beep to DX and other messages on your terminal
=== 0^UNSET/BEEP^Stop beeps for DX and other messages on your terminal
+=== 5^SET/BBS <call> [<call>..]^Make the callsign a BBS
+
=== 5^SET/CLX <call> [<call>..]^Make the callsign an CLX node
=== 9^SET/DEBUG <name>^Add a debug level to the debug set
eg:-
SET/HOMENODE gb7djk
-=== 8^SET/HOPS <call> ann|spots|wwv|wcy <n>^Set hop count
+=== 8^SET/HOPS <call> ann|spots|route|wwv|wcy <n>^Set hop count
Set the hop count for a particular type of broadcast for a node.
This command allows you to set up special hop counts for a node
If you are a sysop and you come in as a normal user on a remote connection
your privilege will automatically be set to 0.
+=== 0^UNSET/PRIVILEGE^Remove any privilege for this session
+You can use this command to 'protect' this session from unauthorised
+use. If you want to get your normal privilege back you will need to
+either logout and login again (if you are on a console) or use the
+SYSOP command.
+
=== 9^SET/PASSWORD <callsign> <string>^Set a users password
The password for a user can only be set by a full sysop. The string
can contain any characters but any spaces are removed (you can type in
Display all the bad spotter's callsigns in the system, see SET/BADSPOTTER
for more information.
+=== 1^SHOW/BADWORD^Show all the bad words in the system
+Display all the bad words in the system, see SET/BADWORD
+for more information.
+
+=== 0^SHOW/CONFIGURATION [<node>]^Show all the nodes and users visible
+This command allows you to see all the users that can be seen
+and the nodes to which they are connected.
+
+This command is normally abbreviated to: sh/c
+
+BE WARNED: the list that is returned can be VERY long
+
+=== 0^SHOW/CONFIGURATION/NODE^Show all the nodes connected locally
+Show all the nodes connected to this node.
+
+=== 1^SHOW/CONNECT^Show all the active connections
+This command shows information on all the active connections known to
+the node. This command gives slightly more information than WHO.
+
=== 0^SHOW/DATE [<prefix>|<callsign>]^Show the local time
This is very nearly the same as SHOW/TIME, the only difference the format
of the date string if no arguments are given.
SH/DXCC G
SH/DXCC W on 20m info iota
+=== 0^SHOW/DXSTATS^Show the DX Statistics for last 31 days
+Show the total DX spots for the last 31 days
+
=== 0^SHOW/FILES [<filearea> [<string>]]^List the contents of a filearea
SHOW/FILES on its own will show you a list of the various fileareas
available on the system. To see the contents of a particular file
Show the contents of all the filters that are set. This command displays
all the filters set - for all the various categories.
-=== 8^SHOW/HOPS <call> [ann|spots|wcy|wwv]^Show the hop counts for a node
+=== 0^SHOW/HFSTATS^Show the HF DX Statistics for last 31 days
+Show the HF DX spots breakdown by band for the last 31 days
+
+=== 0^SHOW/HFTABLE^Show the HF DX Spotter Table for your country
+Show the HF DX Spotter table for your country for the last 31 days
+
+=== 8^SHOW/HOPS <call> [ann|spots|route|wcy|wwv]^Show the hop counts for a node
This command shows the hop counts set up for a node. You can specify
which category you want to see. If you leave the category out then
all the categories will be listed.
SH/SAT AO-10
SH/SAT FENGYUN1 12 2
+=== 6^SHOW/STATION ALL [<regex>]^Show list of users in the system
+=== 0^SHOW/STATION [<callsign> ..]^Show information about a callsign
+Show the information known about a callsign and whether (and where)
+that callsign is connected to the cluster.
+
+ SH/ST G1TLH
+
+If no callsign is given then show the information for yourself.
+
=== 0^SHOW/SUN [<prefix>|<callsign>]^Show sun rise and set times
Show the sun rise and set times for a (list of) prefixes or callsigns,
together with the azimuth and elevation of the sun currently at those
then it will show UTC and UTC + the local offset (not including DST) at
the prefixes or callsigns that you specify.
+=== 0^SHOW/VHFSTATS^Show the VHF DX Statistics for last 31 days
+Show the VHF DX spots breakdown by band for the last 31 days
+
+=== 0^SHOW/VHFTABLE^Show the VHF DX Spotter Table for your country
+Show the VHF DX Spotter table for your country for the last 31 days
+
=== 0^SHOW/WCY^Show last 10 WCY broadcasts
=== 0^SHOW/WCY <n>^Show last <n> WCY broadcasts
Display the most recent WCY information that has been received by the system
Only the fields that are defined (in perl term) will be displayed.
-=== 5^STAT/MSG <msgno>^Show the status of a message
+=== 1^STAT/MSG^Show the status of the message system
+=== 1^STAT/MSG <msgno>^Show the status of a message
This command shows the internal status of a message and includes information
such as to whom it has been forwarded, its size, origin etc etc.
+If no message number is given then the status of the message system is
+displayed.
+
+=== 5^STAT/ROUTE_NODE <callsign>^Show the data in a Route::Node object
+=== 5^STAT/ROUTE_NODE all^Show list of all Route::Node objects
+
+=== 5^STAT/ROUTE_USER <callsign>^Show the data in a Route::User object
+=== 5^STAT/ROUTE_USER all^Show list of all Route::User objects
+
=== 5^STAT/USER [<callsign>]^Show the full status of a user
Shows the full contents of a user record including all the secret flags
and stuff.
projects / spider.git / blobdiff