# # please put your help in in alphabetical order # # a string search is done in the command field (case is ignored) # and all commands matching the asked for command are printed out # # the order of the fields in each header is # privilege, command, Description # if the command ends in a - then that line isn't printed, but any # subsequent lines are # # Comment lines are indented before printing # === 0^ANNOUNCE ^Send an announcement to LOCAL users only === 0^ANNOUNCE FULL ^Send an announcement cluster wide This will send your announcement cluster wide === 5^ANNOUNCE SYSOP ^Send an announcement to Sysops only === 0^ANNOUNCE- is the text of the announcement you wish to broadcast === 0^APROPOS ^Search help database for Search the help database for (it isn't case sensitive), and print the names of all the commands that may be relevant. === 0^BYE^Exit from the cluster This will disconnect you from the cluster === 5^CONNECT ^Start a connection to another DX Cluster Start a connection process that will culminate in a new connection to the DX cluster . This process creates a new 'client' process which will use the script in /spider/connect/ to effect the 'chat' exchange necessary to traverse the network(s) to logon to the cluster . === 9^DEBUG^Set the cluster program into debug mode Executing this command will only have an effect if you are running the cluster in debug mode i.e. perl -d cluster.pl It will interrupt the cluster just after the debug command has finished. === 0^DIRECTORY^List messages === 0^DIRECTORY ALL^List all messages === 0^DIRECTORY OWN^List your own messages === 0^DIRECTORY NEW^List your own new messages List the messages in the messages directory. If there is a 'p' one space after the message number then it is a personal message. If there is a - after the message number then this indicates that the message has been read. === 5^DIRECTORY-^ Sysops can see all users' messages. === 8^DISCONNECT [ ...]^Disconnect a user or cluster Disconnect any connected locally === 0^DX ^Send a DX spot throughout the cluster is compared against the available bands set up in the cluster. see show/bands for more information. === 1^FORWARD/OPERNAME ^Send out information on this to all clusters This command sends out any information held in the user file which can be broadcast in PC41 protocol packets. This information is Name, QTH, Location and Homenode. PC41s are only sent for the information that is available. === 0^HELP^The HELP Command HELP is available for a number of commands. The syntax is:- HELP Where is the name of the command you want help on. All commands can be abbreviated, so SHOW/DX can be abbreviated to SH/DX, ANNOUNCE can be shortened to AN and so on. Look at the APROPOS command which will search the help database for the you specify and give you a list of likely commands to look at with HELP. === 9^LOAD/ALIASES^Reload the command alias table Reload the /spider/cmd/Aliases file after you have editted it. You will need to do this if you change this file whilst the cluster is running in order for the changes to take effect. === 9^LOAD/BANDS^Reload the band limits table Reload the /spider/data/bands.pl file if you have changed it manually whilst the cluster is running. === 9^LOAD/CMD_CACHE^Reload the automatic command cache Normally, if you change a command file in the cmd or local_cmd tree it will automatially be picked up by the cluster program. Sometimes it can get confused if you are doing a lot of moving commands about or delete a command in the local_cmd tree and want to use the normal one again. Execute this command to reset everything back to the state it was just after a cluster restart. === 9^LOAD/MESSAGES^Reload the system messages file If you change the /spider/perl/Messages file (usually whilst fiddling/writing new commands) you can have them take effect during a cluster session by executing this command. You need to do this if get something like :- unknown message 'xxxx' in lang 'en' === 9^LOAD/PREFIXES^Reload the prefix table Reload the /spider/data/prefix_data.pl file if you have changed it manually whilst the cluster is running. === 8^PC ^Send text (eg PC Protocol) to Send some arbitrary text to a locally connected callsign. No processing is done on the text. This command allows you to send PC Protocol to unstick things if problems arise (messages get stuck etc). eg:- pc gb7djk PC33^GB7TLH^GB7DJK^400^ or pc G1TLH Try doing that properly!!! === 1^PING ^Send a ping command to another cluster This command is used to estimate the quality of the link to another cluster. The time returned is the length of time taken for a PC51 to go to another cluster and be returned. === 0^KILL [ ...]^Remove or erase a message from the system You can get rid of any message to or originating from your callsign using this command. You can remove more than one message at a time. === 5^KILL-^ As a sysop you can kill any message on the system. === 1^PING ^Find out the delays an a circuit to another node This command will enable sysops to determine the speed of an inter-cluster node. Any visible cluster node can be PINGed. === 1^RCMD ^Send a command to another DX Cluster This command allows you to send nearly any command to another DX Cluster node that is connected to the system. Whether you get any output is dependant on a) whether the other system knows that the node callsign of this cluster is in fact a node b) whether the other system is allowing RCMDs from this node and c) whether you have permission to send this command at all. === 0^READ^Read the next unread personal message addressed to you === 0^READ ^Read the specified message You can read any messages that are sent as 'non-personal' and also any message either sent by or sent to your callsign. === 5^READ-^ As a sysop you may read any message on the system === 0^REPLY^Reply to the last message that you have read === 0^REPLY ^Reply to the specified message === 0^REPLY PRIVATE ^Reply privately to the specified message === 0^REPLY RR ^Reply to the specified message with read receipt You can reply to a message and the subject will automatically have "Re:" inserted in front of it, if it isn't already present. You can also use all the extra qualifiers such as RR, PRIVATE, NOPRIVATE that you can use with the SEND command (see SEND for further details) === 0^SEND [ ...]^Send a message to one or more callsigns === 0^SEND RR ^Send a message and ask for a read receipt === 0^SEND COPY ^Send a copy of a message to someone === 0^SEND PRIVATE ^Send a personal message === 0^SEND NOPRIVATE ^Send a message to all stations All the SEND commands will create a message which will be sent either to an individual callsign or to one of the 'bulletin' addresses. SEND on its own acts as though you had typed SEND PRIVATE, that is it will mark the message as personal and send it to the cluster node that that callsign is connected to. You can have more than one callsign in all of the SEND commands. You can have multiple qualifiers so that you can have for example:- SEND RR COPY 123 PRIVATE G1TLH G0RDI which should send a copy of message 123 to G1TLH and G0RDI and you will receive a read receipt when they have read the message. SB is an alias for SEND NOPRIVATE (or send a bulletin in BBS speak) SP is an alias for SEND PRIVATE === 0^SET/ADDRESS ^Record your postal address === 0^SET/ANNOUNCE^Allow announce messages to come out on your terminal === 0^UNSET/ANNOUNCE^Stop announce messages coming out on your terminal === 0^SET/BEEP^Add a beep to DX and other messages on your terminal === 0^UNSET/BEEP^Stop beeps for DX and other messages on your terminal === 9^SET/DEBUG ^Add a debug level to the debug set === 9^UNSET/DEBUG ^Remove a debug level from the debug set === 0^SET/DX^Allow DX messages to come out on your terminal === 0^UNSET/DX^Stop DX messages coming out on your terminal === 0^SET/HERE^Tell the system you are present at your terminal === 0^UNSET/HERE^Tell the system you are absent from your terminal === 0^SET/HOMENODE ^Set your normal cluster callsign Tell the cluster system where you normally connect to. Any Messages sent to you will normally find their way there should you not be connected. eg:- SET/HOMENODE gb7djk === 0^SET/LOCATION ^Set your latitude and longitude In order to get accurate headings and such like you must tell the system what your latitude and longitude is. If you have not yet done a SET/QRA then this command will set your QRA locator for you. For example:- SET/LOCATION 52 22 N 0 57 E === 0^SET/LOCKOUT ^Stop a callsign connecting to the cluster === 0^UNSET/LOCKOUT ^Allow a callsign to connect to the cluster === 0^SET/NAME ^Set your name Tell the system what your name is eg:- SET/NAME Dirk === 9^SET/NODE [..]^Make the callsign an AK1A cluster Tell the system that the call(s) are to be treated as AK1A cluster and fed PC Protocol rather normal user commands. === 0^SET/PAGE ^Set the lines per page Tell the system how many lines you wish on a page when the number of line of output from a command is more than this. The default is 20. Setting it explicitly to 0 will disable paging. SET/PAGE 30 SET/PAGE 0 === 9^SET/PRIVILEGE [^Set your QRA locator Tell the system what your QRA (or Maidenhead) locator is. If you have not done a SET/LOCATION then your latitude and longitude will be set roughly correctly (assuming your locator is correct ;-). For example:- SET/QRA JO02LQ === 0^SET/QTH ^Set your QTH Tell the system where you are. For example:- SET/QTH East Dereham, Norfolk === 0^SET/TALK^Allow TALK messages to come out on your terminal === 0^UNSET/TALK^Stop TALK messages coming out on your terminal === 0^SET/WWV^Allow WWV messages to come out on your terminal === 0^UNSET/WWV^Stop WWV messages coming out on your terminal === 0^SHOW/DX^Interrogate the spot database If you just type SHOW/DX you will get the last so many spots (sysop configurable, but usually 10). In addition you can add any number of these commands in very nearly any order to the basic SHOW/DX command, they are:- on - eg 160m 20m 2m 23cm 6mm on - eg hf vhf uhf shf (see SHOW/BANDS) - the number of spots you want - - spot no spot no in the selected list - for a spotted callsign beginning with * - for a spotted callsign ending in ** - for a spotted callsign containing day - starting days ago day - - days days ago info - any spots containing in the info or remarks spotter - any spots spotted by e.g. SH/DX 9m0 SH/DX on 20m info iota SH/DX 9a on vhf day 30 === 0^SHOW/DXCC ^Interrogate the spot database by country This command takes the (which can be a full or partial callsign if desired), looks up which internal country number it is and then displays all the spots as per SH/DX for that country. The options for SHOW/DX also apply to this command. e.g. SH/DXCC G SH/DXCC W on 20m info iota === 0^SHOW/PREFIX ^Interrogate the prefix database This command takes the (which can be a full or partial callsign or a prefix), looks up which internal country number it is and then displays all the relevant prefixes for that country together with the internal country no, the CQ and ITU regions. See also SHOW/DXCC === 5^SHUTDOWN^Shutdown the cluster Shutdown the cluster and disconnect all the users === 0^TALK ^Send a text message to another station === 0^TALK > ^Send a text message to another station via a node Send a short message to any other station that is visible on the cluster system. You can send it to anyone you can see with a SHOW/CONFIGURATION command, they don't have to be connected locally. The second form of TALK is used when other cluster nodes are connected with restricted information. This usually means that they don't send the user information usually associated with loging on and off the cluster. If you know that G3JNB is likly to be present on GB7TLH, but you can only see GB7TLH in the SH/C list but with no users, then you would use the second form of the talk message. === 0^WX ^Send a weather message to local users === 0^WX FULL ^Send a weather message to all cluster users === 5^WX SYSOP ^Send a weather message to other clusters only Weather messages can sometimes be useful if you are experiencing an extreme that may indicate enhanced conditions