From: Dirk Koopman <djk@tobit.co.uk>
Date: Mon, 6 Jul 2020 01:02:45 +0000 (+0100)
Subject: add RBN.mojo
X-Git-Url: http://dxcluster.net/gitweb/gitweb.cgi?a=commitdiff_plain;h=f8558846f5d0fcfafb1ed450921cff434467465f;p=spider.git

add RBN.mojo
---

diff --git a/Changes b/Changes
index 919971b9..9e807f66 100644
--- a/Changes
+++ b/Changes
@@ -1,3 +1,5 @@
+06Jul20=======================================================================
+1. Add RBN.mojo with information of the RBN capabilities of DXSpider.
 05Jul20=======================================================================
 1. Fix show/dxcc.
 2. Add HAPROXY "real ip" type 1 handling for incoming connections.
diff --git a/RBN.mojo b/RBN.mojo
new file mode 100644
index 00000000..8a66c92d
--- /dev/null
+++ b/RBN.mojo
@@ -0,0 +1,230 @@
+6th July 2020
+
+The latest release of the Mojo branch of DXSpider contains a client
+for the Reverse Beacon Network (RBN). This is not a simple client, it
+attempts to make some sense of the 10s of 1000s of "spots" that the
+RBN can send PER HOUR. At busy times, actually nearly all the time, the
+spots from the RBN come in too fast for anybody to get anything more
+than a fleeting impression of what's coming in.
+
+Something has to try to make this manageable - which is what I have
+tried to do with DXSpider's RBN client.
+
+The RBN has a number of problems (apart from the overwhelming quantity
+of data that it sends):
+
+* Spotted callsigns, especially on CW, and not reliably
+  decoded. Estimates vary as to how bad it is but, as far as I can
+  tell, even these estimates are unreliable!
+
+* The frequency given is unreliable. I have seen differences as great
+  as 600hz on CW spots.
+
+* There is far too much (in my view) useless information in each spot
+  - even if one had time to read, decode and understand it before the
+  spot has scrolled off the top of the screen.
+
+* The format of the comment is not regular. If one has both FTx and
+  "all the other" spots (CW, PSK et al) enabled at the same time,
+  one's eye is constantly having to re-adjust. Again, very difficult
+  to deal with on contest days.
+
+
+So what have I done about this:
+
+* As you can see, there are frequently more than one spotter for a
+callsign:
+
+05Jul2020@22:59:31 (chan) <- I SK0MMR DX de KM3T-2-#:  14100.0  CS3B           CW    24 dB  22 WPM  NCDXF B 2259Z
+05Jul2020@22:59:31 (chan) <- I SK0MMR DX de KM3T-2-#:  28263.9  AB8Z/B         CW    15 dB  18 WPM  BEACON  2259Z
+05Jul2020@22:59:31 (chan) <- I SK0MMR DX de LZ3CB-#:   7018.20  RW1M           CW    10 dB  18 WPM  CQ      2259Z
+05Jul2020@22:59:31 (chan) <- I SK0MMR DX de W9XG-#:    14057.6  K7GT           CW     7 dB  21 WPM  CQ      2259Z
+05Jul2020@22:59:31 (chan) <- I SK0MMR DX de G0LUJ-#:   14100.1  CS3B           CW    18 dB  20 WPM  NCDXF B 2259Z
+05Jul2020@22:59:32 (chan) <- I SK0MMR DX de LZ4UX-#:    7018.3  RW1M           CW    13 dB  18 WPM  CQ      2259Z
+05Jul2020@22:59:32 (chan) <- I SK0MMR DX de LZ4AE-#:    7018.3  RW1M           CW    28 dB  18 WPM  CQ      2259Z
+05Jul2020@22:59:32 (chan) <- I SK0MMR DX de W1NT-6-#:  28222.9  N1NSP/B        CW     5 dB  15 WPM  BEACON  2259Z
+05Jul2020@22:59:32 (chan) <- I SK0MMR DX de W1NT-6-#:  28297.0  NS9RC          CW     4 dB  13 WPM  BEACON  2259Z
+05Jul2020@22:59:32 (chan) <- I SK0MMR DX de F8DGY-#:    7018.2  RW1M           CW    23 dB  18 WPM  CQ      2259Z
+05Jul2020@22:59:33 (chan) <- I SK0MMR DX de 9A1CIG-#:  7018.30  RW1M           CW    20 dB  18 WPM  CQ      2259Z
+05Jul2020@22:59:33 (chan) <- I SK0MMR DX de LZ7AA-#:    7018.3  RW1M           CW    16 dB  18 WPM  CQ      2259Z
+05Jul2020@22:59:33 (chan) <- I SK0MMR DX de DK9IP-#:    7018.2  RW1M           CW    21 dB  18 WPM  CQ      2259Z
+05Jul2020@22:59:33 (chan) <- I SK0MMR DX de WE9V-#:    10118.0  N5JCB          CW    15 dB  10 WPM  CQ      2259Z
+05Jul2020@22:59:34 (chan) <- I SK0MMR DX de DJ9IE-#:    7028.0  PT7KM          CW    15 dB  10 WPM  CQ      2259Z
+05Jul2020@22:59:34 (chan) <- I SK0MMR DX de DJ9IE-#:    7018.3  RW1M           CW    31 dB  18 WPM  CQ      2259Z
+05Jul2020@22:59:34 (chan) <- I SK0MMR DX de DD5XX-#:    7018.3  RW1M           CW    21 dB  18 WPM  CQ      2259Z
+05Jul2020@22:59:34 (chan) <- I SK0MMR DX de DE1LON-#:  14025.5  EI5JF          CW    13 dB  19 WPM  CQ      2259Z
+05Jul2020@22:59:34 (chan) <- I SK0MMR DX de DE1LON-#:   7018.3  RW1M           CW    24 dB  18 WPM  CQ      2259Z
+05Jul2020@22:59:34 (chan) <- I SK0MMR DX de ON6ZQ-#:    7018.3  RW1M           CW    22 dB  18 WPM  CQ      2259Z
+05Jul2020@22:59:34 (chan) <- I SK0MMR DX de OH6BG-#:    3516.9  RA1AFT         CW    15 dB  25 WPM  CQ      2259Z
+05Jul2020@22:59:35 (chan) <- I SK0MMR DX de HA1VHF-#:   7018.3  RW1M           CW    30 dB  18 WPM  CQ      2259Z
+05Jul2020@22:59:35 (chan) <- I SK0MMR DX de F6IIT-#:    7018.4  RW1M           CW    32 dB  18 WPM  CQ      2259Z
+05Jul2020@22:59:36 (chan) <- I SK0MMR DX de HB9BXE-#:   7018.3  RW1M           CW    23 dB  18 WPM  CQ      2259Z
+05Jul2020@22:59:37 (chan) <- I SK0MMR DX de SM0IHR-#:   7018.3  RW1M           CW    21 dB  18 WPM  CQ      2259Z
+05Jul2020@22:59:37 (chan) <- I SK0MMR DX de DK0TE-#:    7018.3  RW1M           CW    26 dB  18 WPM  CQ      2259Z
+05Jul2020@22:59:37 (chan) <- I SK0MMR DX de OE9GHV-#:   7018.3  RW1M           CW    40 dB  19 WPM  CQ      2259Z
+05Jul2020@22:59:37 (chan) <- I SK0MMR DX de CX6VM-#:   10118.0  N5JCB          CW    20 dB  10 WPM  CQ      2259Z
+05Jul2020@22:59:37 (chan) -> D G1TST DX de F8DGY-#:     7018.3 RW1M         CW  23dB Q:9* Z:20           16 2259Z 14
+05Jul2020@22:59:38 (chan) <- I SK0MMR DX de HB9JCB-#:   7018.3  RW1M           CW    16 dB  18 WPM  CQ      2259Z
+05Jul2020@22:59:39 (chan) <- I SK0MMR DX de HB9JCB-#:   3516.9  RA1AFT         CW     9 dB  26 WPM  CQ      2259Z
+05Jul2020@22:59:39 (chan) <- I SK0MMR DX de KO7SS-7-#:  14057.6  K7GT           CW     6 dB  21 WPM  CQ      2259Z
+05Jul2020@22:59:39 (chan) <- I SK0MMR DX de K9LC-#:    28169.9  VA3XCD/B       CW     9 dB  10 WPM  BEACON  2259Z
+05Jul2020@22:59:40 (chan) <- I SK0MMR DX de HB9DCO-#:   7018.2  RW1M           CW    25 dB  18 WPM  CQ      2259Z
+05Jul2020@22:59:40 (chan) <- I SK0MMR DX de EA5WU-#:    7018.3  RW1M           CW    19 dB  18 WPM  CQ      2259Z
+
+* I normalise the frequency and cache up to 9 copies from different
+spots. In order to do this I have to wait a few (comfigurable) seconds
+for the client to collect a reasonable number of copies. More copies
+may come in after 9 copies have been. Once I have enough copies to be
+sure that the callsign is at least agreeed upon by more than one
+skimmer, or the wait timer goes off, I emit a spot. An example of
+which is shown above in the spot sent to G1TST. By this means I can
+reduce the number of spots sent to a node user by up to a factor of 10
+for CW etc spots and about 8 for FTx spots.
+
+* No RBN spots can leak out of the node to the general cluster. Each
+  node that wants to use the RBN *must* establish their own
+  connections to the RBN.
+
+* Currently no RBN spots are stored. This may well change but how and
+  where these spots are stored is not yet decided. Only "new" spots
+  will be stored (if they are).
+
+* There are some things that need to be said:
+
+a) The input format from the RBN is not the same as format emitted by
+the cluster node. This is part of the unhelpfulness to mixing a raw
+RBN feed with normal spots.
+
+b) Each spot sent out to a node user has a "Qwalitee" marker, In this
+case Q:9*. The '9' means that I have received 9 copies of this spot
+from different skimmers and, in this case, they did not agree on the
+frequency (7018.2 - 7018.4) which is indicated by a '*'. The frequency
+shown is the majority decision. If this station has been active for
+some time and he is still calling CQ after some time (configurable,
+but currently 60 minutes) and gaps for QSOs or tea breaks are ignored,
+then a '+' character will be added.
+
+c) I ditch the WPM and the 'CQ' as not being hugely relevant. 
+
+d) If there is a Z:nn[,mm...] is there it means that this call was also heard
+in CQ Zone 20. There can a ',' separated list of as many zones as
+there the space available (and this spot call was heard by :-). You
+will notice the spot zone and skimmer call zone around the time. This
+can be activated with a 'set/dxcq' command. This is completely
+optional.
+
+e) I shorten the skimmer callsign to 6 characters, before (re-)adding
+'-#' on the end to minimise the movement rightwards as in the incoming
+spot from KO7SS-7-# just two lines below G1TST. There are some very
+strange skimmer callsigns.
+
+f) I have a filter set (accept/spot by_zone 14 and not zone 14 or zone
+14 and not by_zone 14) which will give me the first spot that either
+spot or skimmer is in zone 14 but the other isn't. For those of us
+that are bad at zones (like me) sh/dxcq is your friend. You can have
+separate filters just for RBN spots if you want something different to
+your spot filters. Use acc/rbn or rej/rbn. NB: these will completely
+override your spot filters for RBN spots. Obviously "real" spots will
+will continue to use the spot filter(s).
+
+g) If there is NO filter in operation, then the skimmer spot with the
+LOWEST signal strength will be shown. This implies that if any extra
+zone are shown then the signal will be higher.
+
+h) A filter can further drastically reduce the output sent to the
+user. As this STATS line shows:
+
+23:22:45 (*) RBN:STATS hour SK0MMR raw: 5826 sent: 555 delivered: 70 users: 1
+
+For this hour, I received 5826 raw spots from the CW etc RBN, which
+produced 555 possible spots, which my filter reduced to 70 that were
+actually delivered to G1TST. For the FTx RBN, I don't have a filter
+active and so I got all the possibles:
+
+23:22:45 (*) RBN:STATS hour SK1MMR raw: 13354 sent: 1745 delivered: 1745 users: 1
+
+---------------------------------------------------------------------
+
+So how do you go about using this:
+
+First you need to create an RBN user. Now you can use any call you
+like and it won't be visible outside of the node. I call mine SK0MMR
+and SK1MMR.
+
+set/rbn sk0mmr sk1mmr
+
+Now create connect scripts in /spider/connect/sk0mmr (and similarly
+sk1mmr). They look like this:
+
+/spider/connect/sk0mmr:
+
+connect telnet telnet.reversebeacon.net 7000
+'call:' '<node callsign here'
+
+/spider/connect/sk1mmr:
+
+connect telnet telnet.reversebeacon.net 7001
+'call:' '<node callsign here'
+
+RBN port 7000 is the "traditional" port for anything except FT4 or FT8
+spots. They come from RBN port 7001.
+
+Now put them in your local crontab in /spider/local_cmd/crontab:
+
+* * * * * start_connect('sk0mmr') unless connected('sk0mmr')
+* * * * * start_connect('sk1mmr') unless connected('sk1mmr')
+
+This will check once every minute to see if each RBN connection is
+active, you can check with the 'links' command:
+
+                                                 Ave  Obs  Ping  Next      Filters
+  Callsign Type Started                 Uptime    RTT Count Int.  Ping Iso? In  Out PC92? Address
+    GB7DJK DXSP  5-Jul-2020 1722Z     7h 6m 8s   0.02   2    300    89               Y    163.172.11.79
+    SK0MMR RBN   5-Jul-2020 1722Z     7h 6m 8s                 0     0                    198.137.202.75
+    SK1MMR RBN   5-Jul-2020 1722Z     7h 6m 8s                 0     0                    198.137.202.75
+
+The connections are sometimes dropped or become stuck, I have a
+mechanism to detect this and it will disconnect that connection and
+the normal reconnection will happen just as any other (normal) node.
+
+It is put in the crontab, rather than started immediately, to prevent
+race conditions (or just slow them down to one disconnection a
+minute).
+
+The first time a connection is made, after node startup, there is a 5
+minute pause before RBN spots come out for users. This is done to fill
+up (or "train") the cache. Otherwise the users will be overwhelmed by
+spots - it slows down reasonably quickly - but experiment shows that 5
+minutes is a reasonable compromise. The delay is configurable,
+globally, for all RBN connections, but in future is likely to be
+configurable per connection. Basically, because the FTx RBN data is
+much more bursty and there is more of it (except on CW contests), it
+could do with a somewhat longer training period.
+
+If a connection drops and reconnects. There is no delay or extra
+training time.
+
+For users. At the moment. There is a single command that sets or
+unsets ALL RBN spot sorts:
+
+set/wantrbn
+unset/wantrbn
+
+Very soon this will be replaced with a '(un)set/skimmer' command that
+allow the user to choose which categories they want. Filtering can be
+used in conjunction with this command to further refine output.
+
+This still very much "work in progress" and will be subject to
+change. But I am grateful to the feedback I have received
+from:
+
+Kin EA3CV
+Andy G4PIQ
+Mike G8TIC
+Lee VE7CC
+
+But if you have comments, suggestions and brickbats please email me or
+the support list.
+
+Dirk G1TLH
+
diff --git a/UPGRADE.mojo b/UPGRADE.mojo
index 502bb0e7..8fd254cb 100644
--- a/UPGRADE.mojo
+++ b/UPGRADE.mojo
@@ -59,7 +59,7 @@ You will need the following CPAN packages:
 	sudo apt-get install libev-perl libmojolicious-perl libjson-perl libjson-xs-perl libdata-structure-util-perl libmath-round-perl
 
     or on Redhat based systems you can install the very similarly (but not the same) named
-	packages. I don't the exact names but using anything less than Centos 7 is likely to cause
+	packages. I don't know the exact names but using anything less than Centos 7 is likely to cause
 	a world of pain. Also I doubt that EV and Mojolicious are packaged for Centos at all.
 
 	If in doubt or it is taking too long to find the packages you should build from CPAN. Note: you may
@@ -70,8 +70,8 @@ You will need the following CPAN packages:
 
 	sudo cpanm EV Mojolicious JSON JSON::XS Data::Structure::Util Math::Round
 	
-	# just in case it's missing
-	sudo apt-get install top
+	# just in case it's missing (top, that is)
+	sudo apt-get install procps
 
 Please make sure that, if you insist on using operating system packages, that your Mojolicious is
 at least version 7.26. Mojo::IOLoop::ForkCall is NOT LONGER IN USE! The current version at time