-Last modified: Sun Sep 2 20:31:56 BST 2001 +Last modified: Sun Sep 2 22:02:36 BST 2001
At the moment, anybody can connect inwards at any time from outside, either by ax25 or by telnet (assuming you have followed the instructions in installation @@ -28,68 +28,78 @@ Last modified: Sun Sep 2 20:31:56 BST 2001
Connect scripts live in the /spider/connect directory and are simple ascii scripts that are written using a normal editor. There are a couple of examples in the issue directory. - -
Here are a few of basic types, first a telnet connection where the - client is set up in the passwd file thus:- -
- gb7djk:x:1372:1291::/home/gb7djk:/usr/bin/perl /spider/perl/client.pl gb7djk telnet -- and the connect script would be:- + +
The first example is a simple telnet (TCP/IP) connect to port 7000 of WR3D (this will actually + work if you have or make an arrangement to connect to WR3D)[oh, and substitute x1xxx for your real + node callsign].
+ +The colouration will be explained later on in this page, you don't have to try to emulate the colours!
+- timeout 15 + timeout 15 # this is a comment - connect telnet dirkl.tobit.co.uk - 'login' 'gb7djk' - 'word' 'gb7djk' - client gb7djk telnet + connect telnet wr3d.dxcluster.net 7000 + 'login' 'x1xxx' + client wr3d telnet+ +
If you put the above script in a file called: /spider/connect/wr3d then you can leave out + line: client wr3d telnet.
For a connect that requires a login and execution of the programs - from a normal shell, do:- + from a normal shell, do:-
- timeout 15 - connect telnet dirkl.tobit.co.uk - 'login' 'gb7djk' - 'word' 'gb7djk' - '\$' 'cd /spider/perl' + timeout 15 + connect telnet dirkl.tobit.co.uk + 'login' 'gb7djk' + 'word' 'gb7djk' + '\$' 'cd /spider/perl' # set the line to prevent echoing, leaving this out will # confuse whole networks for hours! - '\$' 'stty -echo raw' + '\$' 'stty -echo raw' # tell GB7DJK that you are GB7DJK-1 - '\$' '/spider/src/client gb7djk-1 telnet' + '\$' '/spider/src/client gb7djk-1 telnet' # tell GB7DJK-1 that it is connected to GB7DJK # you can leave this out if you call this script 'gb7djk' - client gb7djk telnet + client gb7djk telnet-
a ax25 example:- +
An ax25 example (connecting from GB7DJK, to GB7DXM via my local BPQ node and one X1J intermediate node):- +
- timeout 60 - abort (Busy|Sorry|Fail) + timeout 60 + abort (Busy|Sorry|Fail) # don't forget to chmod 4775 netrom_call! - connect ax25 /usr/sbin/netrom_call bbs gb7djk-0 g1tlh-0 - 'Connected' '' - 'Connected' 'c np7' - 'linked to' 'c gb7dxm' - 'Connect' '' + connect ax25 /usr/sbin/netrom_call bbs gb7djk-0 g1tlh-0 + 'Connected' 'c np7' + '*** Connect' 'c gb7dxm' + 'Connect' ''- The -0 ssid is important if you want it to work reliably. Obviously if you are - using a different ssid then you would use that. +
The -0 ssid is important if you want it to work reliably. Obviously if you are + using a different ssid then you would use that. You can use the Netrom alias instead if it + it is in the machines node table.
+ +The line: "'Connected' ''" means: wait for + the string Connected and when that is seen, then move onto the next line + without sending anything. The reason you do this (in this case) is to wait + for the final "connect" string from the BPQ node that directly connects you to the + cluster node itself.
+ +An AGW Engine example would be very similar and look like this:-
-A AGW Engine example would be very similar and look like this:-
- timeout 60 - abort (Busy|Sorry|Fail) - connect agw 2 g1tlh - '*** Connected' '' - '*** Connect' 'c np7' - 'linked to' 'c gb7dxm' - 'Connect' '' + timeout 60 + abort (Busy|Sorry|Fail) + connect agw 2 g1tlh + '*** Connect' 'c np7' + 'Connected' 'c gb7dxm' + 'Connect' ''
A connection is started manually by typing in connect <scriptname> on a sysop enabled - client.pl session. For example:- + client.pl session. For example:-
+
G1TLH de GB7DJK 13-Dec-1998 2041Z > connect gb7djk-1
connection to GB7DJK-1 started
@@ -100,20 +110,21 @@ Last modified: Sun Sep 2 20:31:56 BST 2001
timeout 15
- connect telnet dirkl.tobit.co.uk
+ connect telnet dirkl.tobit.co.uk
'login' 'gb7djk'
'ssword' 'gb7djk'
You can watch the progress of the connection (if you have connect
debugging enabled [set/debug connect]) on the
- cluster.pl screen and you should see something like this:-
+ cluster.pl screen and you should see something like this:-
+
<- D G1TLH connect gb7djk-1
-> D G1TLH connection to GB7DJK-1 started
-> D G1TLH G1TLH de GB7DJK 13-Dec-1998 2046Z >
timeout set to 15
- CONNECT sort: telnet command: dirkl.tobit.co.uk
+ CONNECT sort: telnet command: dirkl.tobit.co.uk
CHAT "login" -> "gb7djk"
received "
Red Hat Linux release 5.1 (Manhattan)
@@ -138,11 +149,17 @@ Last modified: Sun Sep 2 20:31:56 BST 2001
etc
- I have coloured the commands in an attempt to make it clear as to what goes on, where and why.
- These coloured lines are miscellaneous commands, the things
- that are this colour are the strings I am looking for (what I am "expecting")
- and the things that are this colour
- are the commands I am going to make when I see the "expect" strings in the input.
+ I have coloured the commands in an attempt to make it clear as
+ to what goes on, where and why. Lines that are coloured thus are miscellaneous setup
+ commands. Lines that are this colour
+ are lines that make the initial connection to the first hop. The things that
+ are this colour are the strings I am
+ looking for (what I am "expecting") and
+ the things that are this colour are the
+ commands I am going to send when I see the
+ "expect" strings in the input.
The script starts by setting the timeout to 15 seconds, then starts
the connection. It is important to note that, in the case of
@@ -150,23 +167,26 @@ Last modified: Sun Sep 2 20:31:56 BST 2001
route that you are going to take to the destination, so this will be typically the callsign
of your local node.
- You will notice that the script waits until it sees the left hand string
- of the pair and only then does it send the,
- string on the right
- hand side. This is called a State Machine.
+ You will notice that the script waits
+ until it sees the left hand string of the pair and only
+ then does it send the string on the
+ right hand side. This is called a State Machine.
- A state machine "walks" through a conversation (in this case) looking
- for "states" (in this case particular strings) and then performs some
- "action" (usually some kind of connect command for the type of system
- you are trying to navigate). When one "state" "fires" (detects the string
- are looking for), it sends the command associated with that state and then
- moves onto the next "state", in our case: the next line.
+ A state machine "walks" through a conversation (in this
+ case) looking for "states" (in this case
+ particular strings) and then performs some "action" (usually some kind of connect command
+ for the type of system you are trying to navigate). When one
+ "state" "fires"
+ (detects the string are looking for), it sends the command
+ associated with that state and then moves onto the next "state", in our case: the next line.
PLEASE NOTE: the colouration in the above example is for illustrative purposes
only, the debug output is all one colour.
The connect scripts consist of lines which start with the
- following keywords or symbols:-
+ following keywords or symbols:-
In the case of a @@ -193,34 +213,40 @@ Last modified: Sun Sep 2 20:31:56 BST 2001 the first is the ip address or hostname of the computer you wish to connect to and the second is the port number you want to use (this can be left out if it is a normal telnet - session). + session).
In the case of an ax25 session then this would normally be a call to /usr/sbin/ax25_call or /usr/sbin/netrom_call as in the example above. It is your responsibility to get your node and other ax25 parameters to - work before going down this route! + work before going down this route!
For agw connections you will need a port number (starting
- from 1) and the callsign of the first "hop" along the way.
-
+ from 1) and the callsign of the first "hop" along the way.
When the left hand string has found what it is looking (if - it is) then the right hand string is sent to the connection. +
When the left hand string has found what it is expecting (if + it is) then the right hand string is sent to the connection.
-This process is repeated for every line of chat script.
-
+
If the left hand + string is empty then it doesn't read or wait for anything, it + simply sends whatever is on the right hand side.
-All comparisons are done ignoring case.
+ +If the right hand string is empty ('') then nothing is sent, the + script simply moves onto the next line.
+ +This process is repeated for every line of chat script.
+ +-
-
-
- Copyright © 1998 by Dirk Koopman G1TLH. All Rights Reserved
-
- $Id$
+