Filters can be set for spots, announcements and WWV. You will find the -directories for these under /spider/filter. You will find some examples in -the directories with the suffix .issue. There are two types of -filter, one for incoming information and one for outgoing information. -Outgoing filters are in the form CALLSIGN.pl and incoming filters -are in the form in_CALLSIGN.pl. Filters can be set for both nodes -and users. -
-
All filters work in basically the same way. There are several elements -delimited by commas. There can be many lines in the filter and they are -read from the top by the program. When writing a filter you need to think -carefully about just what you want to achieve. You are either going to write -a filter to accept or to reject. Think of a filter as -having 2 main elements. For a reject filter, you would have a line or multiple -lines rejecting the things you do not wish to receive and then a default line -accepting everything else that is not included in the filter. Likewise, for an -accept filter, you would have a line or multiple lines accepting the things you -wish to receive and a default line rejecting everthing else. -
-
In the example below, a user requires a filter that would only return SSB spots -posted in Europe on the HF bands. This is achieved by first rejecting the CW -section of each HF band and rejecting all of VHF, UHF etc based on frequency. -Secondly, a filter rule is set based on CQ zones to only accept spots posted in -Europe. Lastly, a default filter rule is set to reject anything outside the filter. -
-
-
-$in = [
- [ 0, 0, 'r', # reject all CW spots
- [
- 1800.0, 1850.0,
- 3500.0, 3600.0,
- 7000.0, 7040.0,
- 14000.0, 14100.0,
- 18068.0, 18110.0,
- 21000.0, 21150.0,
- 24890.0, 24930.0,
- 28000.0, 28180.0,
- 30000.0, 49000000000.0,
- ] ,1 ],
- [ 1, 11, 'n', [ 14, 15, 16, 20, 33, ], 15 ], #accept EU
- [ 0, 0, 'd', 0, 1 ], # 1 = want, 'd' = everything else
-];
-
-One of the more important things a cluster sysop needs to do is to get +information to his users. The simplest way to do this is to have a banner +that is sent to the user on login. This is know as a "message of the day" +or "motd". To set this up, simply create a file in /spider/data called motd +and edit it to say whatever you want. It is purely a text file and will be +sent automatically to anyone logging in to the cluster.
-
The actual elements of each filter are described more fully in the following -sections. +
If for any reason the cluster is down, maybe for upgrade or maintenance but +the machine is still running, a message can be sent to the user advising them +of the fact. This message lives in the /spider/data directory and is called +"offline". Simply create the file and edit it to say whatever you wish. +This file will be sent to a user attempting to log into the cluster when +DXSpider is not actually running.
-
The elements of the Spot filter are .... +
You can set other text messages to be read by the user if they input the file +name. This could be for news items or maybe information for new users. +To set this up, make a directory under /spider called packclus. +Under this directory you can create files called news or newuser +for example. In fact you can create files with any names you like. These can +be listed by the user with the command ....
-[action, field_no, sort, possible_values, hops]
+show/files
-
There are 3 elements here to look at. Firstly, the action element. This is -very simple and only 2 possible states exist, accept (1) or drop (0). -
-
The second element is the field_no. There are 13 possiblities to choose from -here .... +
They can be read by the user by typing the command ....
- 0 = frequency
- 1 = call
- 2 = date in unix format
- 3 = comment
- 4 = spotter
- 5 = spotted dxcc country
- 6 = spotter's dxcc country
- 7 = origin
- 8 = spotted itu
- 9 = spotted cq
- 10 = spotter's itu
- 11 = spotter's cq
- 12 = callsign of the channel on which the spot has appeared
+type news
If the file they want to read is called news. You could also set +an alias for this in the Alias file to allow them just to type news
-
The third element tells us what to expect in the fourth element. There are -4 possibilities .... +
You can also store other information in this directory, either directly or +nested under directories. One use for this would be to store DX bulletins +such as the OPDX bulletins. These can be listed and read by the user. +To keep things tidy, make a directory under /spider/packclus called +bulletin. Now copy any OPDX or similar bulletins into it. These +can be listed by the user in the same way as above using the show/files +command with an extension for the bulletin directory you have just created, +like this ....
- n - numeric list of numbers e.g. [ 1,2,3 ]
- r - ranges of pairs of numbers e.g. between 2 and 4 or 10 to 17 - [ 2,4, 10,17 ]
- a - an alphanumeric regex
- d - the default rule
+show/files bulletin
-
The fifth element is simply the hops to set in this filter. This would only -be used if the filter was for a node of course and overrides the hop count in -hop_table.pl. -
-
So, let's look at an example spot filter. It does not matter in the example -who the filter is to be used for. So, what do we need in the filter? We need -to filter the spots the user/node requires and also set a default rule for -anything else outside the filter. Below is a simple filter that stops spots -arriving from outside Europe. +
An example would look like this ....
-$in = [
- [ 0, 4, 'a', '^(K|N|A|W|VE|VA|J)'], # 0 = drop, 'a' = alphanumeric
- [ 1, 0, 'd', 0, 1 ], # 1 = want, 'd' = everything else
- ];
+sh/files
+bulletin DIR 20-Dec-1999 1715Z news 1602 14-Dec-1999 1330Z
-
So the filter is wrapped in between a pair of square brackets. This tells -Spider to look in between these limits. Then each line is contained within -its own square brackets and ends with a comma. Lets look carefully at the first -line. The first element is 0 (drop). Therefore anything we put on this line -will not be accepted. The next element is 4. This means we are filtering by -the spotter. The third element is the letter "a" which tells the program to -expect an alphanumeric expression in the fourth element. The fourth element -is a list of letters separated by the pipe symbol. -
-
What this line does is tell the program to drop any spots posted by anyone in -the USA, Canada or Japan. -
-
The second line is the default rule for anything else. The "d" tells us this -and the line simply reads... accept anything else. -
-
You can add as many lines as you need to complete the filter but if there are -several lines of the same type it is neater to enclose them all as one line. -An example of this is where specific bands are set. We could write this like -this .... +
You can see that in the files area (basically the packclus directory) there is a +file called news and a directory called bulletin. You can +also see that dates they were created. In the case of the file news, +you can also see the time it was last modified, a good clue as to whether the +file has been updated since you last read it. To read the file called +news you would simply issue the command ....
-[ 0,0,'r',[1800.0, 2000.0], 1],
-[ 0,0,'r',[10100.0, 10150.0], 1],
-[ 0,0,'r',[14000.0, 14350.0], 1],
-[ 0,0,'r',[18000.0, 18200.0], 1],
+type news
-
But the line below achieves the same thing and is more efficient .... +
To look what is in the bulletin directory you issue the command ....
- [ 0, 0, 'r',
- [
- 1800.0, 2000.0, # top band
- 10100.0, 10150.0, # WARC
- 14000.0, 14350.0, # 20m
- 18000.0, 18200.0, # WARC
- [ ,1 ],
+show/files bulletin
+opdx390 21381 29-Nov-1999 1621Z opdx390.1 1670 29-Nov-1999 1621Z
+opdx390.2 2193 29-Nov-1999 1621Z opdx391 25045 29-Nov-1999 1621Z
+opdx392 35969 29-Nov-1999 1621Z opdx393 15023 29-Nov-1999 1621Z
+opdx394 33429 29-Nov-1999 1621Z opdx394.1 3116 29-Nov-1999 1621Z
+opdx395 24319 29-Nov-1999 1621Z opdx396 32647 29-Nov-1999 1621Z
+opdx396.1 5537 29-Nov-1999 1621Z opdx396.2 6242 29-Nov-1999 1621Z
+opdx397 18433 29-Nov-1999 1621Z opdx398 19961 29-Nov-1999 1621Z
+opdx399 17719 29-Nov-1999 1621Z opdx400 19600 29-Nov-1999 1621Z
+opdx401 27738 29-Nov-1999 1621Z opdx402 18698 29-Nov-1999 1621Z
+opdx403 24994 29-Nov-1999 1621Z opdx404 15685 29-Nov-1999 1621Z
+opdx405 13984 29-Nov-1999 1621Z opdx405.1 4166 29-Nov-1999 1621Z
+opdx406 28934 29-Nov-1999 1621Z opdx407 24153 29-Nov-1999 1621Z
+opdx408 15081 29-Nov-1999 1621Z opdx409 23234 29-Nov-1999 1621Z
+Press Enter to continue, A to abort (16 lines) >
You can now read any file in this directory using the type command, like this ....
+
+
+type bulletin/opdx391
+Ohio/Penn DX Bulletin No. 391
+The Ohio/Penn Dx PacketCluster
+DX Bulletin No. 391
+BID: $OPDX.391
+January 11, 1999
+Editor Tedd Mirgliotta, KB8NW
+Provided by BARF-80 BBS Cleveland, Ohio
+Online at 440-237-8208 28.8k-1200 Baud 8/N/1 (New Area Code!)
+Thanks to the Northern Ohio Amateur Radio Society, Northern Ohio DX
+Association, Ohio/Penn PacketCluster Network, K1XN & Golist, WB2RAJ/WB2YQH
+& The 59(9) DXReport, W3UR & The Daily DX, K3TEJ, KN4UG, W4DC, NC6J, N6HR,
+Press Enter to continue, A to abort (508 lines) >
+
+The page length will of course depend on what you have it set to!
-
You will find a file in /spider/cmd/ called Aliases. First, copy this file to +/spider/local_cmd/Aliases and edit this file. You will see something like this ...
-# This is an example announce or filter allowing only West EU announces
-#
-# The element list is:-
-# 0 - callsign of announcer
-# 1 - destination * = all, <callsign> = routed to the node
-# 2 - text
-# 3 - * - sysop, <some text> - special list eg 6MUK, ' ', normal announce
-# 4 - origin
-# 5 - 0 - announce, 1 - wx
-# 6 - channel callsign (the interface from which this spot came)
-
-$in = [
- [ 1, 0, 'a', '^(P[ABCDE]|DK0WCY|G|M|2|EI|F|ON)' ],
- [ 0, 0, 'd', 0 ]
-];
+#!/usr/bin/perl
+
+# provide some standard aliases for commands for terminally
+# helpless ak1a user (helpless in the sense that they never
+# read nor understand help files)
+
+# This file is automagically reloaded if its modification time is
+# later than the one stored in CmdAlias.pm
+
+# PLEASE make this file consistant with reality! (the patterns MUST
+# match the filenames!)
+
+# Don't alter this file, copy it into the local_cmd tree and modify it.
+# This file will be replaced everytime I issue a new release.
+
+# You only need to put aliases in here for commands that don't work as
+# you desire naturally, e.g sh/dx on its own just works as you expect
+# so you need not add it as an alias.
+
+
+
+package CmdAlias;
+
+%alias = (
+ '?' => [
+ '^\?', 'apropos', 'apropos',
+ ],
+ 'a' => [
+ '^ann.*/full', 'announce full', 'announce',
+ '^ann.*/sysop', 'announce sysop', 'announce',
+ '^ann.*/(.*)$', 'announce $1', 'announce',
+ ],
+ 'b' => [
+ ],
+ 'c' => [
+ ],
+ 'd' => [
+ '^del', 'kill', 'kill',
+ '^del\w*/fu', 'kill full', 'kill',
+ '^di\w*/a\w*', 'directory all', 'directory',
+ '^di\w*/b\w*', 'directory bulletins', 'directory',
+ '^di\w*/n\w*', 'directory new', 'directory',
+ '^di\w*/o\w*', 'directory own', 'directory',
+ '^di\w*/s\w*', 'directory subject', 'directory',
+ '^di\w*/t\w*', 'directory to', 'directory',
+ '^di\w*/f\w*', 'directory from', 'directory',
+ '^di\w*/(\d+)', 'directory $1', 'directory',
+ ],
+ 'e' => [
+ ],
+ 'f' => [
+ ],
+ 'g' => [
+ ],
+ 'h' => [
+ ],
+ 'i' => [
+ ],
+ 'j' => [
+ ],
+ 'k' => [
+ ],
+ 'l' => [
+ '^l$', 'directory', 'directory',
+ '^ll$', 'directory', 'directory',
+ '^ll/(\d+)', 'directory $1', 'directory',
+ ],
+ 'm' => [
+ ],
+ 'n' => [
+ '^news', 'type news', 'type',
+ ],
+ 'o' => [
+ ],
+ 'p' => [
+ ],
+ 'q' => [
+ '^q', 'bye', 'bye',
+ ],
+ 'r' => [
+ '^r$', 'read', 'read',
+ '^rcmd/(\S+)', 'rcmd $1', 'rcmd',
+ ],
+ 's' => [
+ '^s/p$', 'send', 'send',
+ '^sb$', 'send noprivate', 'send',
+ '^set/home$', 'set/homenode', 'set/homenode',
+ '^set/nobe', 'unset/beep', 'unset/beep',
+ '^set/nohe', 'unset/here', 'unset/here',
+ '^set/noan', 'unset/announce', 'unset/announce',
+ '^set/nodx', 'unset/dx', 'unset/dx',
+ '^set/nota', 'unset/talk', 'unset/talk',
+ '^set/noww', 'unset/wwv', 'unset/wwv',
+ '^set/nowx', 'unset/wx', 'unset/wx',
+ '^sh$', 'show', 'show',
+ '^sh\w*/buck', 'dbshow buck', 'dbshow',
+ '^sh\w*/bu', 'show/files bulletins', 'show/files',
+ '^sh\w*/c/n', 'show/configuration nodes', 'show/configuration',
+ '^sh\w*/c$', 'show/configuration', 'show/configuration',
+ '^sh\w*/com', 'dbavail', 'dbavail',
+ '^sh\w*/dx/(\d+)-(\d+)', 'show/dx $1-$2', 'show/dx',
+ '^sh\w*/dx/(\d+)', 'show/dx $1', 'show/dx',
+ '^sh\w*/dx/d(\d+)', 'show/dx from $1', 'show/dx',
+ '^sh\w*/email', 'dbshow email', 'dbshow',
+ '^sh\w*/hftest', 'dbshow hftest', 'dbshow',
+ '^sh\w*/vhftest', 'dbshow vhftest', 'dbshow',
+ '^sh\w*/qsl', 'dbshow qsl', 'dbshow',
+ '^sh\w*/tnc', 'who', 'who',
+ '^sh\w*/up', 'show/cluster', 'show/cluster',
+ '^sh\w*/w\w*/(\d+)-(\d+)', 'show/wwv $1-$2', 'show/wwv',
+ '^sh\w*/w\w*/(\d+)', 'show/wwv $1', 'show/wwv',
+ '^sp$', 'send', 'send',
+
+ ],
+ 't' => [
+ '^ta$', 'talk', 'talk',
+ '^t$', 'talk', 'talk',
+ ],
+ 'u' => [
+ ],
+ 'v' => [
+ ],
+ 'w' => [
+ '^wx/full', 'wx full', 'wx',
+ '^wx/sysop', 'wx sysop', 'wx',
+ ],
+ 'x' => [
+ ],
+ 'y' => [
+ ],
+ 'z' => [
+ ],
+)
In this example, only the prefixes listed will be allowed. It is possible to -be quite specific. The Dutch prefix "P" is followed by several secondary -identifiers which are allowed. So, in the example, "PA" or "PE" would be ok -but not "PG". It is even possible to allow information from a single callsign. -In the example this is DK0WCY, to allow the posting of his Aurora Beacon. +
You can create aliases for commands at will. Beware though, these may not +always turn out as you think. Care is needed and you need to test the +results once you have set an alias. +
+
In later versions of Spider a simple console program is provided for the sysop. +This has a type ahead buffer with line editing facilities and colour for spots, +announces etc. To use this program, simply use console.pl instead of client. +
+
To edit the colours, copy /spider/perl/Console.pl to /spider/local and edit the +file with your favourite editor.
-
Spider has a powerful and flexible show/satellite command. In order for +this to be accurate, the kepler data has to be updated regularly. In +general, this data is available as an email or via cluster mail. +Updating it is simple. First you need to export the mail message as a +file. You do this with the export command from the cluster prompt +as the sysop. For example ...
-
-# This is an example WWV filter
-#
-# The element list is:-
-# 0 - nominal unix date of spot (ie the day + hour:13)
-# 1 - the hour
-# 2 - SFI
-# 3 - K
-# 4 - I
-# 5 - text
-# 6 - spotter
-# 7 - origin
-# 8 - incoming interface callsign
-
-# this one doesn't filter, it just sets the hop count to 6 and is
-# used mainly just to override any isolation from WWV coming from
-# the internet.
-
-$in = [
- [ 1, 0, 'd', 0, 6 ]
-];
+export 5467 /spider/perl/keps.in
would export message number 5467 as a file called keps.in in the +/spider/perl directory. +
Now login to a VT as sysop and cd /spider/perl. There is a command in +the perl directory called convkeps.pl. All we need to do now is +convert the file like so ...
-
It should be noted that the filter will start to be used only once a user/node -has logged out and back in again. -
I am not going to spend any more time on these filters now as they will become -more "comprehensive" in the near future. +
+
+./convkeps.pl keps.in
+
+Now go back to the cluster and issue the command ... +
+
+
+load/keps
+
+That is it! the kepler data has been updated. +
+
The command sh/qrz will only work once you have followed a few +simple steps. First you need to get a user ID and password from qrz.com. +Simply go to the site and create one. Secondly you need to copy the file +/spider/perl/Internet.pm to /spider/local and alter it to match your user +ID and password. You also at this point need to set $allow=1 to complete +the setup. Many thanks to Fred Lloyd, the proprieter of +qrz.com for allowing this access.