X-Git-Url: http://dxcluster.net/gitweb/gitweb.cgi?a=blobdiff_plain;f=html%2Fadminmanual-10.html;h=6aff45b97150c24f6a8c579d87bde82e1925e79b;hb=551887c98fa231f03aa2a1829e7ef00ca3e097b9;hp=d0d083eeb1d3931c25c3287132da81104129cb82;hpb=439f25ba04e8c4ddbd6806f31da58c0939e2c868;p=spider.git diff --git a/html/adminmanual-10.html b/html/adminmanual-10.html index d0d083ee..6aff45b9 100644 --- a/html/adminmanual-10.html +++ b/html/adminmanual-10.html @@ -2,9 +2,10 @@
-Below is a complete list of commands available from the cluster prompt. -Most maintenance tasks are automatic but there are some commands that are useful -for a sysop. These are listed below in alphabetical order. The number in -brackets following the command name is the permissions level needed to use -the command. +Most maintenance tasks are automatic but there are some commands that are useful +for a sysop. These are listed below in alphabetical order. The number in +brackets following the command name is the permissions level needed to use +the command
accept/announce [0-9] <pattern> Set an accept filter
line for announce
-
Create an 'accept this announce' line for a filter. +
Create an 'accept this announce' line for a filter.
An accept filter line means that if the announce matches this filter it is passed onto the user. See HELP FILTERS for more info. Please read this to understand how filters work - it will save a lot of grief later on.
You can use any of the following things in this line:-
+
info <string> eg: iota or qsl
- by <prefixes> eg: G,M,2
+ by <prefixes> eg: G,M,2
origin <prefixes>
origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
origin_itu <numbers>
@@ -45,24 +47,31 @@ to understand how filters work - it will save a lot of grief later on.
wx 1 filter WX announces
dest <prefixes> eg: 6MUK,WDX (distros)
+
some examples:-
+
acc/ann dest 6MUK
acc/ann 2 by_zone 14,15,16
(this could be all on one line: acc/ann dest 6MUK or by_zone 14,15,16)
+
or
+
acc/ann by G,M,2
+
This filter would only allow announces that were posted buy UK stations. You can use the tag 'all' to accept everything eg:
+
acc/ann all
+
but this probably for advanced users...
This version allows a sysop to set a filter for a callsign as well as the default for nodes and users eg:-
+
accept/ann by G,M,2
accept/ann input node_default by G,M,2
accept/ann user_default by G,M,2
+
++
accept/route <call> [0-9] <pattern> Set an 'accept' filter line for routing
+
+
Create an 'accept this routing PC Protocol' line for a filter. +
+
An accept filter line means that if a PC16/17/19/21/24/41/50 matches this filter +it is passed thru that interface. See HELP FILTERING for more info. Please read this +to understand how filters work - it will save a lot of grief later on. +
+
You can use any of the following things in this line:- +
+
+
+ call <prefixes> the callsign of the thingy
+ call_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ call_itu <numbers>
+ call_zone <numbers>
+ origin <prefixes> really the interface it came in on
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+
+
++
some examples:- +
+
+
+ acc/route gb7djk call_dxcc 61,38 (send only UK+EIRE nodes)
+ acc/route gb7djk call gb7djk (equiv to SET/ISOLATE)
+
+
++
You can use the tag 'all' to accept everything eg: +
+
+
+ acc/route all
+
+
-
accept/announce [0-9] <pattern> Set an accept filter line for spots
+
accept/spots [0-9] <pattern> Set an accept filter line for spots
Create an 'accept this spot' line for a filter.
An accept filter line means that if the spot matches this filter it is passed onto the user. See HELP FILTERS for more info. Please read this to understand how filters work - it will save a lot of grief later on. +
Please read the following section carefully. Though it looks similar, +reformatting, corrections, and hopefully clarifications have been added.
You can use any of the following things in this line:-
+
- freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
- on <range> same as 'freq'
- call <prefixes> eg: G,PA,HB9
- info <string> eg: iota or qsl
- by <prefixes>
- call_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+Filters for the station being spotted:
+ call <letters of the prefix, but NOT country inclusive>
+ call G --> G1AAA, GJ2BBB, GU3CCC, etc will be spotted
+ call K --> K1XX, K1XXX will be spotted
+ W1XX, W1XXX will NOT be spotted
+ call PA --> PA3EZL will be spotted
+ PB2FG will NOT be spotted
+
+ call_dxcc <numbers or prefixes>
+ call_dxcc G --> G1AAA will be spotted
+ GU1AAA will NOT be spotted (different country)
+ call_dxcc K --> K1XX, W1XX will be spotted (same country)
+ call_dxcc 139 --> PA3EZL and PB2FG will be spotted
+
call_itu <numbers>
call_zone <numbers>
- by_dxcc <numbers>
+
+Filters for the callsign of the station doing the spotting:
+ by <letters of the prefix, but NOT country inclusive>
+ by G --> spots from G1AAA, GJ2BBB, GU3CCC, etc will be spotted
+ by K --> spots from K1XX, K1XXX will be spotted
+ spots from W1XX, W1XXX will NOT be spotted
+
+ by_dxcc <numbers or prefixes>
+ by_dxcc G --> spots from G1AAA will be spotted
+ spots from GU1AAA will NOT be spotted (different
+country)
+ by_dxcc K --> spots from K1XX, W1XX will be spotted (same country)
+ by_dxcc 139 --> spots from PA3EZL or PB2FG will be spotted
+
by_itu <numbers>
by_zone <numbers>
- origin <prefixes>
+
+Filters for the callsign of the "node" doing the spotting:
+ origin <letters of the prefix, but NOT country inclusive>
+ origin K --> spots from a node starting with K will be spotted
+ spots from a node starting with KK will NOT be spotted
+ spots from a node starting with W will NOT be spotted
+
+Filters for the callsign of the connected node or user (channel) doing the spotting:
channel <prefixes>
+ channel W1HR --> spots from the connected node W1HR will be spotted
+ channel K1QX --> spots from the connected user K1QX will be spotted
+
+ info <string> eg: iota or qsl
+ freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
+ on <range> same as 'freq'
+
For frequencies, you can use any of the band names defined in SHOW/BANDS and you can use a subband name like: cw, rtty, data, ssb - @@ -114,18 +206,22 @@ this is more efficient than saying simply: freq HF (but don't get too hung up about that)
some examples:-
+
acc/spot 1 on hf/cw
acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+
You can use the tag 'all' to accept everything, eg:
+
acc/spot 3 all
+
but this probably for advanced users...
-
accept/spots <call> [input] [0-9] <pattern> Spot filter sysop version
@@ -133,6 +229,7 @@ too hung up about that)
This version allows a sysop to set a filter for a callsign as well as the default for nodes and users eg:-
+
accept/spot db0sue-7 1 by_zone 14,15,16
accept/spot node_default all
@@ -140,8 +237,9 @@ default for nodes and users eg:-
accept/spot user_default by G,M,2
+
-
accept/wcy [0-9] <pattern> set an accept WCY filter
@@ -149,6 +247,7 @@ default for nodes and users eg:-
It is unlikely that you will want to do this, but if you do then you can filter on the following fields:-
+
by <prefixes> eg: G,M,2
origin <prefixes>
@@ -160,13 +259,14 @@ filter on the following fields:-
by_zone <numbers>
channel <prefixes>
+
There are no examples because WCY Broadcasts only come from one place and you either want them or not (see UNSET/WCY if you don't want them).
This command is really provided for future use.
See HELP FILTER for information.
-
accept/wcy <call> [input] [0-9] <pattern>
@@ -175,12 +275,14 @@ WCY filter sysop version
This version allows a sysop to set a filter for a callsign as well as the default for nodes and users eg:-
+
accept/wcy node_default all
set/hops node_default 10
+
-
accept/wwv [0-9] <pattern> Set an accept WWV filter
@@ -188,6 +290,7 @@ default for nodes and users eg:-
It is unlikely that you will want to do this, but if you do then you can filter on the following fields:-
+
by <prefixes> eg: G,M,2
origin <prefixes>
@@ -199,16 +302,19 @@ filter on the following fields:-
by_zone <numbers>
channel <prefixes>
+
for example
+
accept/wwv by_zone 4
+
is probably the only useful thing to do (which will only show WWV broadcasts by stations in the US).
See HELP FILTER for information.
-
accept/wwv <call> [input] [0-9] <pattern>
@@ -217,6 +323,7 @@ WWV filter sysop version
This version allows a sysop to set a filter for a callsign as well as the default for nodes and users eg:-
+
accept/wwv db0sue-7 1 by_zone 4
accept/wwv node_default all
@@ -224,16 +331,19 @@ default for nodes and users eg:-
accept/wwv user_default by W,K
+
-
announce <text> Send an announcement to local users
Send an announcement to LOCAL users only, where <text> is the text -of the announcement you wish to broadcast +of the announcement you wish to broadcast. If you do not wish to receive +announces, use the set/noannounce command. Any announces made by +a sysop will override set/noannounce.
-
announce full <text> Send an announcement cluster wide
@@ -242,14 +352,14 @@ of the announcement you wish to broadcast
network.
-
announce sysop <text>
Send an announcement to Sysops only
-
apropos <string> Search the help database
@@ -257,14 +367,14 @@ network.
Search the help database for <string> (it isn't case sensitive), and print the names of all the commands that may be relevant.
-
bye Exit from the cluster
This will disconnect you from the cluster
-
catchup <node_call> All|[<msgno> ...] Mark a message as sent
@@ -276,20 +386,43 @@ outstanding non-private messages will be forwarded to them. This may well
be ALL the non-private messages. You can prevent this by using these
commmands:-
+
catchup GB7DJK all
catchup GB7DJK 300 301 302 303 500-510
+
and to undo what you have just done:-
+
uncatchup GB7DJK all
uncatchup GB7DJK 300 301 302 303 500-510
+
which will arrange for them to be forward candidates again.
Order is not important.
-
clear/announce [input] <callsign> [0-9|all] Clear an announce filter line
+
+
A sysop can clear an input or normal output filter for a user or the +node_default or user_default. +
+
clear/route [input] ^lt;callsign> [0-9|all] Clear a route filter line
+
+
This command allows you to clear (remove) a line in a route filter or to +remove the whole filter. +
see CLEAR/SPOTS for a more detailed explanation. +
A sysop can clear an input or normal output filter for a user or the +node_default or user_default. +
+
clear/spots [1|all] Clear a spot filter line
@@ -298,29 +431,78 @@ commmands:-
remove the whole filter.
If you have a filter:-
+
acc/spot 1 on hf/cw
acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+
and you say:-
+
clear/spot 1
+
you will be left with:-
+
acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+
If you do:
+
clear/spot all
+
the filter will be completely removed.
+
clear/spots [input] <callsign> [0-9|all] Clear a spot filter line
+
+
A sysop can clear an input or normal output filter for a user or the +node_default or user_default. +
+
clear/wcy [1|all] Clear a WCY filter line
+
+
This command allows you to clear (remove) a line in a WCY filter or to +remove the whole filter. +
see CLEAR/SPOTS for a more detailed explanation. +
+
clear/wcy [input] <callsign> [0-9|all] Clear a WCY filter line
+
+
A sysop can clear an input or normal output filter for a user or the +node_default or user_default. +
+
clear/wwv [1|all] Clear a WWV filter line
+
+
This command allows you to clear (remove) a line in a WWV filter or to +remove the whole filter. +
see CLEAR/SPOTS for a more detailed explanation.
-
clear/wwv [input] <callsign> [0-9|all] Clear a WWV filter line
+
+
A sysop can clear an input or normal output filter for a user or the +node_default or user_default. +
+
connect <callsign> Start a connection to another DX Cluster
@@ -330,7 +512,7 @@ DX cluster <callsign>. This process creates a new 'client' process which w
use the script in /spider/connect/<callsign> to effect the 'chat' exchange
necessary to traverse the network(s) to logon to the cluster <callsign>.
-
dbavail Show a list of all the databases in the system
@@ -338,7 +520,7 @@ necessary to traverse the network(s) to logon to the cluster <callsign>.
The title says it all really, this command lists all the databases defined in the system. It is also aliased to SHOW/COMMAND.
-
See DBIMPORT for the importing of existing AK1A format data to databases.
See DBSHOW for generic database enquiry
- will import the standard OBLAST database that comes with AK1A into the
oblast database held locally.
- There is no warning, no comeback, no safety net.
You have been warned.
-
+ but if he hasn't and the database really does exist (use DBAVAIL or
SHOW/COMMAND to find out) you can do the same thing with:
+
-dbcreate <name> Create a database entry
@@ -388,7 +570,7 @@ need to add a line like:-
10.19 dbimport (9)
+
10.27 dbimport (9)
dbimport <dbname> Import AK1A data into a database
@@ -400,7 +582,7 @@ database. For example:-
10.20 dbremove (9)
+
10.28 dbremove (9)
dbremove <dbname> Delete a database
@@ -416,7 +598,7 @@ the associated datafile.
10.21 dbshow (0)
+
10.29 dbshow (0)
dbshow <dbname> <key> Display an entry, if it exists, in a database
@@ -425,18 +607,22 @@ the associated datafile.
It is expected that the sysop will add an entry to the local Aliases file
so that users can use the more familiar AK1A style of enquiry such as:
SH/BUCK G1TLH
+
DBSHOW buck G1TLH
+10.22 debug (9)
+
10.30 debug (9)
debug Set the cluster program into debug mode
@@ -451,7 +637,36 @@ in debug mode i.e.
It will interrupt the cluster just after the debug command has finished.
-
delete/user <callsign> Delete a user from the User Database
+
+
This command will completely remove a one or more users from the database. +
There is NO SECOND CHANCE. +
It goes without saying that you should use this command CAREFULLY! +
+
demonstrate <call> <command> Demonstrate a command to another user
+
+
This command is provided so that sysops can demonstrate commands to +other users. It runs a command as though that user had typed it in and +then sends the output to that user, together with the command that +caused it. +
+
+
+ DEMO g7brn sh/dx iota oc209
+ DEMO g1tlh set/here
+
+
+Note that this command is similar to SPOOF and will have the same side +effects. Commands are run at the privilege of the user which is being +demonstrated to. +
+
You can combine some of the various directory commands together eg:-
+ You can abbreviate all the commands to one letter and use ak1a syntax:-
+
- Works just like the user command except that sysops can see ALL messages.
-
Disconnect any <call> connected locally
- This is how you send a DX Spot to other users. You can, in fact, now
enter the <freq> and the <call> either way round.
+ will all give the same result. You can add some remarks to the end
of the command and they will be added to the spot.
+ You can credit someone else by saying:-
+ The <freq> is compared against the available bands set up in the
cluster. See SHOW/BANDS for more information.
- EXPORT 2345 /tmp/a
- BE WARNED: this will write to any file you have write access to. No check is
made on the filename (if any) that you specify.
-
+ There are a number of things you can filter in the DXSpider system. They
+all use the same general mechanism.
+ In general terms you can create a 'reject' or an 'accept' filter which
+can have up to 10 lines in it. You do this using, for example:-
+ accept/spots .....
+reject/spots .....
+ where ..... are the specific commands for that type of filter. There
+are filters for spots, wwv, announce, wcy and (for sysops)
+connects. See each different accept or reject command reference for
+more details.
+ There is also a command to clear out one or more lines in a filter and
+one to show you what you have set. They are:-
+ clear/spots 1
+clear/spots all
+ and
+ show/filter
+ There is clear/xxxx command for each type of filter.
+ For now we are going to use spots for the examples, but you can apply
+the principles to all types of filter.
+ There are two main types of filter 'accept' or 'reject'; which you use
+depends entirely on how you look at the world and what is least
+writing to achieve what you want. Each filter has 10 lines (of any
+length) which are tried in order. If a line matches then the action
+you have specified is taken (ie reject means ignore it and accept
+means gimme it).
+ The important thing to remember is that if you specify a 'reject'
+filter (all the lines in it say 'reject/spots' (for instance) then if
+a spot comes in that doesn't match any of the lines then you will get
+it BUT if you specify an 'accept' filter then any spots that don't
+match are dumped. For example if I have a one line accept filter:-
+ accept/spots on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+ then automatically you will ONLY get VHF spots from or to CQ zones 14
+15 and 16. If you set a reject filter like:
+ reject/spots on hf/cw
+ Then you will get everything EXCEPT HF CW spots, If you am interested in IOTA
+and will work it even on CW then you could say:-
+ reject/spots on hf/cw and not info iota
+ But in that case you might only be interested in iota and say:-
+ accept/spots not on hf/cw or info iota
+ which is exactly the same. You should choose one or the other until
+you are confortable with the way it works. Yes, you can mix them
+(actually you can have an accept AND a reject on the same line) but
+don't try this at home until you can analyse the results that you get
+without ringing up the sysop for help.
+ You can arrange your filter lines into logical units, either for your
+own understanding or simply convenience. I have one set frequently:-
+ reject/spots 1 on hf/cw
+reject/spots 2 on 50000/1400000 not (by_zone 14,15,16 or call_zone 14,15,16)
+ What this does is to ignore all HF CW spots (being a class B I can't
+read any CW and couldn't possibly be interested in HF :-) and also
+rejects any spots on VHF which don't either originate or spot someone
+in Europe.
+ This is an exmaple where you would use the line number (1 and 2 in
+this case), if you leave the digit out, the system assumes '1'. Digits
+'0'-'9' are available.
+ You can leave the word 'and' out if you want, it is implied. You can
+use any number of brackets to make the 'expression' as you want
+it. There are things called precedence rules working here which mean
+that you will NEED brackets in a situation like line 2 because,
+without it, will assume:-
+ (on 50000/1400000 and by_zone 14,15,16) or call_zone 14,15,16
+ annoying, but that is the way it is. If you use OR - use
+brackets. Whilst we are here CASE is not important. 'And BY_Zone' is
+just 'and by_zone'.
+ If you want to alter your filter you can just redefine one or more
+lines of it or clear out one line. For example:-
+ reject/spots 1 on hf/ssb
+ or
+ clear/spots 1
+ To remove the filter in its entirty:-
+ clear/spots all
+ There are similar CLEAR commands for the other filters:-
+ clear/announce
+clear/wcy
+clear/wwv
+ ADVANCED USERS:-
+ Once you are happy with the results you get, you may like to experiment.
+ my example that filters hf/cw spots and accepts vhf/uhf spots from EU
+can be written with a mixed filter, eg:
+ rej/spot on hf/cw
+acc/spot on 0/30000
+acc/spot 2 on 50000/1400000 and (by_zone 14,15,16 or call_zone 14,15,16)
+ each filter slot actually has a 'reject' slot and an 'accept'
+slot. The reject slot is executed BEFORE the accept slot.
+ It was mentioned earlier that after a reject test that doesn't match,
+the default for following tests is 'accept', the reverse is true for
+'accept'. In the example what happens is that the reject is executed
+first, any non hf/cw spot is passed to the accept line, which lets
+thru everything else on HF.
+ The next filter line lets through just VHF/UHF spots from EU.
+
+
+ This command sends all the latitude and longitude information that your
+cluster is holding against callsigns. One advantage of recieving this
+information is that more locator information is held by you. This
+means that more locators are given on the DX line assuming you have
+set/dxgrid enabled. This could be a LOT of information though, so
+it is not recommended on slow links.
+
+
-
- Best of luck - you will need it.
-
- As a sysop you can kill any message on the system.
-
Delete a message (usually a 'bulletin') from the whole cluster system.
This uses the subject field, so any messages that have exactly the same subject
will be deleted. Beware!
-
+ Deleting a message using the normal KILL commands only marks that message
+for deletion. The actual deletion only happens later (usually two days later).
+ The KILL EXPUNGE command causes the message to be truly deleted more or less
+immediately.
+ It otherwise is used in the same way as the KILL command.
+
+
+
-
-
- Reload the /spider/data/baddx.pl file if you have changed it manually whilst
-the cluster is running. This table contains the DX Calls that, if spotted,
-will not be passed on. FR0G and TEST are classic examples.
-
-
-
Reload the /spider/data/badwords file if you have changed it manually whilst
the cluster is running. This file contains a list of words which, if found
@@ -658,7 +997,7 @@ to be rejected. It will all put out a message if any of these words are
used on the announce, dx and talk commands. The words can be one or
more on a line, lines starting with '#' are ignored.
- Reload the /spider/data/bands.pl file if you have changed it manually whilst
the cluster is running.
-
- Reload the /spider/msg/forward.pl file if you have changed it
manually whilst the cluster is running.
- unknown message 'xxxx' in lang 'en'
- Reload the /spider/data/prefix_data.pl file if you have changed it manually
whilst the cluster is running.
-
- STAT/MSG <msgno>
This will display more information on the message than DIR does.
- pc G1TLH Try doing that properly!!!
-
- This command is used to estimate the quality of the link to another cluster.
-The time returned is the length of time taken for a PC51 to go to another
-cluster and be returned.
- Any visible cluster node can be PINGed.
+ his command allows you to send a frame to another cluster node on
+the network and get a return frame. The time it takes to do this
+is a good indication of the quality of the link. The actual time
+it takes is output to the console in seconds.
+Any visible cluster node can be PINGed.
-
+
-
-
As a sysop you may read any message on the system
- You can use any of the following things in this line:-
+ some examples:-
+ You can use the tag 'all' to reject everything eg:
+ but this probably for advanced users...
- This version allows a sysop to set a filter for a callsign as well as the
default for nodes and users eg:-
+
-
+ Create an 'reject this routing PC Protocol' line for a filter.
+
+ An reject filter line means that if a PC16/17/19/21/24/41/50 matches this filter
+it is NOT passed thru that interface. See HELP FILTERING for more info. Please
+read this to understand how filters work - it will save a lot of grief later on.
+You can use any of the following things in this line:-
+
+
+ some examples:-
+
+
+ You can use the tag 'all' to reject everything eg:
+
+
+
- Create an 'reject this spot' line for a filter.
- An reject filter line means that if the spot matches this filter it is
+ Create a 'reject this spot' line for a filter.
+ A reject filter line means that if the spot matches this filter it is
dumped (not passed on). See HELP FILTERS for more info. Please read this
to understand how filters work - it will save a lot of grief later on.
You can use any of the following things in this line:-
+ For frequencies, you can use any of the band names defined in
SHOW/BANDS and you can use a subband name like: cw, rtty, data, ssb -
thus: hf/ssb. You can also just have a simple range like: 0/30000 -
@@ -882,18 +1274,22 @@ this is more efficient than saying simply: on HF (but don't get
too hung up about that)
some examples:-
+ You can use the tag 'all' to reject everything eg:
+ but this probably for advanced users...
- This version allows a sysop to set a filter for a callsign as well as the
default for nodes and users eg:-
+
- It is unlikely that you will want to do this, but if you do then you can
filter on the following fields:-
+ There are no examples because WCY Broadcasts only come from one place and
you either want them or not (see UNSET/WCY if you don't want them).
This command is really provided for future use.
See HELP FILTER for information.
- reject/wcy gb7djk all
- It is unlikely that you will want to do this, but if you do then you can
filter on the following fields:-
+ for example
+ is probably the only useful thing to do (which will only show WWV broadcasts
by stations in the US).
See HELP FILTER for information.
- This version allows a sysop to set a filter for a callsign as well as the
default for nodes and users eg:-
+
-
- You can have more than one callsign in all of the SEND commands.
You can have multiple qualifiers so that you can have for example:-
+ which should send a copy of message 123 to G1TLH and G0RDI and you will
receive a read receipt when they have read the message.
SB is an alias for SEND NOPRIVATE (or send a bulletin in BBS speak)
SP is an alias for SEND PRIVATE
-
Literally, record your address details on the cluster.
-
Allow announce messages to arrive at your terminal.
-
Set the node_call as an AR-Cluster type node
-
+ Setting a word as 'baddx' will prevent spots with that word in the callsign
+field of a DX spot from going any further. They will not be displayed and they
+will not be sent onto other nodes.
+ The word must be wriiten in full, no wild cards are allowed eg:-
+
+ To allow a word again, use the following command ...
+
+
+ The call can be a full or partial call (or a prefix), eg:-
+ will stop anything from K1TTT (including any SSID's)
+ will allow spots from him again.
+ Use with extreme care. This command may well be superceded by FILTERing.
+
+
+ Setting a callsign as a 'badspotter' will prevent spots from this callsign
+going any further. They will not be displayed and they will not be
+sent onto other nodes.
+ The call must be written in full, no wild cards are allowed eg:-
+
+ will stop anything from VE2STN. If you want SSIDs as well then you must
+enter them specifically.
+
+ will allow spots from him again.
Use with extreme care. This command may well be superceded by FILTERing.
-
+ Setting a word as a 'badword' will prevent things like spots,
+announces or talks with this word in the the text part from going any
+further. They will not be displayed and they will not be sent onto
+other nodes.
+ The word must be written in full, no wild cards are allowed eg:-
+ set/badword annihilate annihilated annihilation
+ will stop anything with these words in the text.
+ unset/badword annihilated
+ will allow text with this word again.
+
+
+
Add a beep to DX and other terminal messages.
-
+
Set the node_call as a CLX type node
-
- You can remove this level with unset/debug <name>
+ You can choose to log several different levels. The levels are
+ chan
+state
+msg
+cron
+connect
+ You can show what levels you are logging with the show/debug
+command.
+ You can remove a debug level with unset/debug <name>
-
You can stop DX messages with the unset/dx command
-
-
Set the node_call as a DXNet type node
- The setting is stored in your user profile.
YOU DO NOT NEED TO USE THIS COMMAND IF YOU ARE CONNECTED VIA AX25.
-
+ If any personal messages come in for your callsign then you can use
+these commands to control whether they are forwarded onto your email
+address. To enable the forwarding do something like:-
+ SET/EMAIL mike.tubby@somewhere.com
+ You can have more than one email address (each one separated by a space).
+Emails are forwarded to all the email addresses you specify.
+ You can disable forwarding by:-
+ UNSET/EMAIL
+
+
+
- This command allows you to set up special hop counts for a node
for currently: announce, spots, wwv and wcy broadcasts.
+ Set SHOW/HOPS for information on what is already set. This command
creates a filter and works in conjunction with the filter system.
- You can see which nodes are isolated with the show/isolate (1) command.
You can remove the isolation with the command unset/isolate.
- You can select the language that you want the cluster to use. Currently
the languages available are en (English) and nl (Dutch).
- You can set your latitude and longitude manually or alternatively use the
set/qra command which will do the conversion for you.
+
-
+
-
- You can show who is locked out with the show/lockout command.
To allow the user to connect again, use the unset/lockout command.
-
Tell the cluster what your name is, eg:-
+
- From version 1.41 you can also set the following types of cluster
+ To see what your nodes are set to, use the show/nodes command.
-
-
+ The setting is stored in your user profile.
+
+ This command only works for a 'telnet' user (currently). It will
+only work if you have a password already set. This initial password
+can only be set by the sysop.
+ When you execute this command it will ask you for your old password,
+then ask you to type in your new password twice (to make sure you
+get it right). You may or may not see the data echoed on the screen
+as you type, depending on the type of telnet client you have.
-
The password for a user can only be set by a full sysop. The string
-can contain any characters but any spaces are removed (you can type in
-spaces - but they won't appear in the password). You can see the
-result with STAT/USER. The password is the usual 30 character baycom
-type password.
-
- The way this field is used depends on context. If it is being used in
+the SYSOP command context then you are offered 5 random numbers and you
+have to supply the corresponding letters. This is now mainly for ax25
+connections.
+ If it is being used on incoming telnet connections then, if a password
+is set or the:
+ set/var $main::passwdreq = 1
+ command is executed in the startup script, then a password prompt is
+given after the normal 'login: ' prompt.
+ The command "unset/password" is provided to allow a sysop to remove a
+users password completely in case a user forgets or loses their password.
+
+
- If you are a sysop and you come in as a normal user on a remote connection
your privilege will automatically be set to 0.
-
Set the node_call as a DXSpider type node
-
-
+
-
Tell the system where your are. For example:-
+
-
+ Registration is a concept that you can switch on by executing the
+ set/var $main::regreq = 1
+ command (usually in your startup file)
+ If a user is NOT registered then, firstly, instead of the normal
+motd file (/spider/data/motd) being sent to the user at startup, the
+user is sent the motd_nor file instead. Secondly, the non registered
+user only has READ-ONLY access to the node. The non-registered user
+cannot use DX, ANN etc.
+ The only exception to this is that a non-registered user can TALK or
+SEND messages to the sysop.
+ To unset a user use the 'unset/register' command
+
+ Allow talk messages to arrive at your console. You can switch off
talks with the unset/talk command.
- Allow WCY information to be seen at your console. You can switch off
WCY messages with the unset/wcy command.
- Allow WWV information to be seen at your console. You can switch off
WWV messages with the unset/wwv command.
- Allow WX information to be seen at your console. You can switch off
WX messages with the unset/wx command.
-
+ Display all the bad dx callsigns in the system, see SET/BADDX
+for more information.
+
+ Display all the bad node callsigns in the system, see SET/BADNODE
for more information.
-
+ Display all the bad spotter's callsigns in the system, see SET/BADSPOTTER
+for more information.
+
+
+ Display all the bad words in the system, see SET/BADWORD
+for more information.
+
+
+ This command allows you to see all the users that can be seen
+and the nodes to which they are connected. With the optional node,
+you can specify a particular node to look at.
+ This command is normally abbreviated to: sh/c
+ BE WARNED: the list that is returned can be VERY long
+
+
+ Show all the nodes connected locally and the nodes they have connected.
+
+
+ This command shows information on all the active connections known to
+the node. This command gives slightly more information than WHO.
+
+
-
+ The levels can be set with set/debug
+
+ In addition you can add any number of these options in very nearly
any order to the basic SHOW/DX command, they are:-
+ e.g.
+
- The options for SHOW/DX also apply to this command.
e.g.
+
-
+ Show the total DX spots for the last 31 days
+
+
+
+ where <filearea> is the name of the filearea you want to see the
contents of.
You can also use shell globbing characters like '*' and '?' in a
string to see a selection of files in a filearea eg:-
+ See also TYPE - to see the contents of a file.
- Show the contents of all the filters that are set by you. This command
displays all the filters set - for all the various categories.
-
A sysop can look at any filters that have been set.
-
+ Show the HF DX spots breakdown by band for the last 31 days
+
+
+ Show the HF DX Spotter table for your country for the last 31 days
+
+
-
Show which nodes are currently set to be isolated.
- Show a list of callsigns that have been excluded (locked out) of the
cluster locally with the set/lockout command
-
+ This command outputs a short section of the system log. On its own
+it will output a general logfile. With the optional callsign it will
+show output from the log associated with that callsign.
+
+ For example:-
+
-
+ produces:
+ indicating that you will have weak, fading circuits on top band and
80m but usable signals on 40m (about S3).
- inputing:-
+ inputting:-
+ will get you the above display, but with the next 24 hours worth of
propagation data.
+ Gives you an estimate of the long path propagation characterics. It
should be noted that the figures will probably not be very useful, nor
terrible accurate, but it is included for completeness.
-
+ This command allows you to see all the users that can be seen
+and the nodes to which they are connected.
+ This command produces essentially the same information as
+SHOW/CONFIGURATION except that it shows all the duplication of
+any routes that might be present It also uses a different format
+which may not take up quite as much space if you don't have any
+loops.
+ BE WARNED: the list that is returned can be VERY long
+
+
+ Show all the nodes connected to this node in the new format.
+
+
- See also SHOW/DXCC
- Show the name and location where every program module was load from. This
is useful for checking where you think you have loaded a .pm file from.
-
+ The first example will show the distance and bearing to the locator from
yourself, the second example will calculate the distance and bearing from
the first locator to the second. You can use 4 or 6 character locators.
@@ -1714,11 +2405,13 @@ the first locator to the second. You can use 4 or 6 character locators.
using this command with a latitude and longitude as an argument, for
example:-
+
-
-
+
+ This command allows you to see to which node the callsigns specified are
+connected. It is a sort of inverse sh/config.
+
+
+ Each pass in a period is separated with a row of '-----' characters
So for example:-
+
- For example:-
+
-
-
+ Show the VHF DX spots breakdown by band for the last 31 days
+
+
+ Show the VHF DX Spotter table for your country for the last 31 days
+
+
Display the most recent WCY information that has been received by the system
- Display the most recent WWV information that has been received by the system
- Shutdown the cluster and disconnect all the users. If you have Spider
set to respawn in /etc/inittab it will of course restart.
-
- Depending on your privilege level you will see more or less information.
This command is unlikely to be of much use to anyone other than a sysop.
- Only the fields that are defined (in perl term) will be displayed.
- This command shows the internal status of a message and includes information
such as to whom it has been forwarded, its size, origin etc etc.
- If no message number is given then the status of the message system is
+displayed.
+
+
+
+ Only the fields that are defined (in perl term) will be displayed.
-
+ you type:-
+ They will all match. If there is no password you will still be offered
numbers but nothing will happen when you input a string. Any match is
case sensitive.
- If you want to do something (such as send a spot) you precede the normal
command with a '/' character, eg:-
+ To leave talk mode type:
+
-
+ See also SHOW/FILES to see what fileareas are available and a
list of content.
- This is a quick listing that shows which callsigns are connected and
what sort of connection they have
- Weather messages can sometimes be useful if you are experiencing an extreme
that may indicate enhanced conditions
-directory List messages
directory all List all messages
@@ -471,32 +686,36 @@ personal message. If there is a '-' between the message number and the
fields.
DIR TO G1TLH 5
or
DIR SUBJECT IOTA 200-250
+
DIR/T G1* 10
DIR/S QSL 10-100 5
+10.24 directory (extended for sysops) (5)
+
10.34 directory (extended for sysops) (5)
10.25 disconnect (8)
+
10.35 disconnect (8)
disconnect <call> [<call> ...] Disconnect a user or node
10.26 dx (0)
+
10.36 dx (0)
dx [by <call>] <freq> <call> <remarks> Send a DX spot
@@ -504,26 +723,32 @@ or
DX FR0G 144.600
DX 144.600 FR0G
DX 144600 FR0G
+
DX FR0G 144600 this is a test
+
DX by G1TLH FR0G 144.600 he isn't on the cluster
+10.27 export (9)
+
10.37 export (9)
export <msgno> <filename> Export a message to a file
@@ -538,7 +763,7 @@ main cluster, otherwise you can put the new files anywhere the cluster can
access. For example:-
10.28 export_users (9)
+
10.38 export_users (9)
export_users [<filename>] Export the users database to ascii
@@ -551,7 +776,115 @@ suffix.
10.29 forward/opername (1)
+
10.39 filtering (0)
+
+
+filtering Filtering things in DXSpider
+10.40 forward/latlong (8)
+
+
+forward/latlong <node_call> Send latitude and longitude information to another cluster
+10.41 forward/opername (1)
forward/opername <call> Send out information on this <call> to all clusters
@@ -560,7 +893,7 @@ made on the filename (if any) that you specify.
be broadcast in PC41 protocol packets. This information is Name, QTH, Location
and Homenode. PC41s are only sent for the information that is available.
10.30 help (0)
+
10.42 help (0)
help <cmd> Get help on a command
@@ -571,7 +904,7 @@ to SH/DX, ANNOUNCE can be shortened to AN and so on.
for the <string> you specify and give you a list of likely commands
to look at with HELP.
10.31 init (5)
+
10.43 init (5)
init <node call> Re-initialise a link to an AK1A compatible node
@@ -583,7 +916,7 @@ better, if it is a real AK1A node, doing an RCMD <node> DISC/F <your
node>).
10.32 kill (0)
+
10.44 kill (0)
kill <msgno> [<msgno> ..] Delete a message from the local system
@@ -592,7 +925,7 @@ node>).
delete messages that you have originated or been sent (unless you are
the sysop).
10.33 kill (5)
+
10.45 kill (5)
kill <msgno> [<msgno> ...] Remove or erase a message from the system
@@ -603,14 +936,28 @@ the sysop).
this command. You can remove more than one message at a time.
10.34 kill full (5)
-
+kill full <msgno> [<msgno>] Delete a message from the whole cluster
10.46 kill full (5)
+
+kill full <msgno> [<msgno>] Delete a message from the whole cluster
+10.35 links (0)
+
10.47 kill/expunge (6)
+
+
+kill/expunge <msgno> [<msgno>..]Expunge a message
+10.48 links (0)
links Show which nodes are physically connected
@@ -619,7 +966,7 @@ will be deleted. Beware!
some information about them. See WHO for a list of all connections.
10.36 load/aliases (9)
+
10.49 load/aliases (9)
load/aliases Reload the command alias table
@@ -628,15 +975,7 @@ some information about them. See WHO for a list of all connections.
do this if you change this file whilst the cluster is running in order for the
changes to take effect.
10.37 load/baddx (9)
-
-
-load/baddx Reload the bad DX table
10.38 load/badmsg (9)
+
10.50 load/badmsg (9)
load/badmsg Reload the bad message table
@@ -646,10 +985,10 @@ the cluster is running. This table contains a number of perl regular
expressions which are searched for in the fields targetted of each message.
If any of them match then that message is immediately deleted on receipt.
10.39 load/badwords (9)
+
10.51 load/badwords (9)
-load/badwords Reload the badwords file
+load/badwords Reload the bad words table
10.40 load/bands (9)
+
10.52 load/bands (9)
load/bands Reload the band limits table
@@ -666,7 +1005,7 @@ more on a line, lines starting with '#' are ignored.
10.41 load/cmd_cache (9)
+
10.53 load/cmd_cache (9)
load/cmd_cache Reload the automatic command cache
@@ -677,14 +1016,14 @@ if you are doing a lot of moving commands about or delete a command in the
local_cmd tree and want to use the normal one again. Execute this command to
reset everything back to the state it was just after a cluster restart.
10.42 load/forward (9)
+
10.54 load/forward (9)
load/forward Reload the msg forwarding routing table
10.43 load/messages (9)
+
10.55 load/messages (9)
load/messages Reload the system messages file
@@ -694,7 +1033,7 @@ commands) you can have them take effect during a cluster session by executing th
command. You need to do this if get something like :-
10.44 load/prefixes (9)
+
10.56 load/prefixes (9)
load/prefixes Reload the prefix table
@@ -702,7 +1041,7 @@ command. You need to do this if get something like :-
10.45 merge (5)
+
10.57 merge (5)
merge <node> [<no spots>/<no wwv>] Ask for the latest spots and WWV
@@ -714,7 +1053,7 @@ node must be connected locally.
to your databases they will not duplicate any that have recently been added
(the last 2 days for spots and last month for WWV data).
10.46 msg (9)
+
10.58 msg (9)
msg <cmd> <msgno> [data ...] Alter various message parameters
@@ -745,7 +1084,7 @@ out.
10.47 pc (8)
+
10.59 pc (8)
pc <call> <text> Send text (eg PC Protocol) to <call>
@@ -758,17 +1097,19 @@ arise (messages get stuck etc). eg:-
without any processing, added of "from <blah> to <blah>" or whatever.
10.48 ping (1)
+
10.60 ping (1)
-ping <node> Send a ping command to another cluster node
+ping <node> Check the link quality between nodes
10.49 rcmd (1)
+
10.61 rcmd (1)
rcmd <node call> <cmd> Send a command to another DX cluster
@@ -780,7 +1121,7 @@ that the node callsign of this cluster is in fact a node b) whether the
other system is allowing RCMDs from this node and c) whether you have
permission to send this command at all.
10.50 read (0)
+
10.62 read (0)
read Read the next unread personal message addressed to you
@@ -790,14 +1131,14 @@ permission to send this command at all.
message either sent by or sent to your callsign.
10.51 read (extended for sysops) (5)
+
10.63 read (extended for sysops) (5)
read <msgno> Read a message on the system
10.52 reject/announce
+
10.64 reject/announce
reject/announce [0-9] <pattern> Set a reject filter
@@ -809,6 +1150,7 @@ passed onto the user. See HELP FILTERS for more info. Please read this
to understand how filters work - it will save a lot of grief later on.
info <string> eg: iota or qsl
by <prefixes> eg: G,M,2
@@ -823,19 +1165,24 @@ to understand how filters work - it will save a lot of grief later on.
wx 1 filter WX announces
dest <prefixes> eg: 6MUK,WDX (distros)
+
rej/ann by_zone 14,15,16 and not by G,M,2
+
rej/ann all
+10.53 reject/announce (extended for sysops) (8)
+
10.65 reject/announce (extended for sysops) (8)
reject/announce <call> [input] [0-9] <pattern> Announce filter sysop version
@@ -843,23 +1190,67 @@ to understand how filters work - it will save a lot of grief later on.
reject/ann by G,M,2
reject/ann input node_default by G,M,2
reject/ann user_default by G,M,2
+10.54 reject/spots (0)
+
10.66 reject/route (8)
+
+
+reject/route <call> [0-9] <pattern> Set an 'reject' filter line for routing
+
+
+
+ call <prefixes> the callsign of the thingy
+ call_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ call_itu <numbers>
+ call_zone <numbers>
+ origin <prefixes> really the interface it came in on
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+
+
+
+
+ rej/route gb7djk call_dxcc 61,38 (everything except UK+EIRE nodes)
+
+
+
+
+ rej/route all (equiv to [very] restricted mode)
+
+10.67 reject/spots (0)
reject/spots [0-9] <pattern> Set a reject filter line for spots
freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
on <range> same as 'freq'
@@ -875,6 +1266,7 @@ to understand how filters work - it will save a lot of grief later on.
origin <prefixes>
channel <prefixes>
+
rej/spot 1 on hf
rej/spot 2 on vhf and not (by_zone 14,15,16 or call_zone 14,15,16)
+
rej/spot 3 all
+10.55 reject/spots (extended for sysops) (8)
+
10.68 reject/spots (extended for sysops) (8)
reject/spots <call> [input] [0-9] <pattern>
@@ -902,6 +1298,7 @@ Reject spot filter sysop version
reject/spot db0sue-7 1 by_zone 14,15,16
reject/spot node_default all
@@ -909,8 +1306,9 @@ default for nodes and users eg:-
reject/spot user_default by G,M,2
+10.56 reject/wcy (0)
+
10.69 reject/wcy (0)
reject/wcy [0-9] <pattern> Set a reject WCY filter
@@ -918,6 +1316,7 @@ default for nodes and users eg:-
by <prefixes> eg: G,M,2
origin <prefixes>
@@ -929,12 +1328,13 @@ filter on the following fields:-
by_zone <numbers>
channel <prefixes>
+10.57 reject/wcy (extended for sysops) (8)
+
10.70 reject/wcy (extended for sysops) (8)
reject/wcy <call> [input] [0-9] <pattern>
@@ -944,7 +1344,7 @@ WCY reject filter sysop version
default for nodes and users eg:-
10.58 reject/wwv (0)
+
10.71 reject/wwv (0)
reject/wwv [0-9] <pattern> Set a reject WWV filter
@@ -952,6 +1352,7 @@ default for nodes and users eg:-
by <prefixes> eg: G,M,2
origin <prefixes>
@@ -963,16 +1364,19 @@ filter on the following fields:-
by_zone <numbers>
channel <prefixes>
+
reject/wwv by_zone 14,15,16
+10.59 reject/wwv (extended for sysops) (8)
+
10.72 reject/wwv (extended for sysops) (8)
reject/wwv <call> [input] [0-9] <pattern>
@@ -981,14 +1385,16 @@ WWV reject filter sysop version
reject/wwv db0sue-7 1 by_zone 4
reject/wwv node_default all
reject/wwv user_default by W
+10.60 reply (0)
+
10.73 reply (0)
reply Reply (privately) to the last message that you have read
@@ -1004,7 +1410,7 @@ message
NOPRIVATE, B that you can use with the SEND command (see SEND
for further details)
10.61 send (0)
+
10.74 send (0)
send <call> [<call> ...] Send a message to one or more callsigns
done a SET/LOCATION then your latitude and longitude will be set roughly
correctly (assuming your locator is correct ;-). For example:-
@@ -1021,29 +1427,31 @@ that callsign is connected to.
SEND RR COPY 123 PRIVATE G1TLH G0RDI
+10.62 set/address (0)
+
10.75 set/address (0)
set/address <your_address> Record your postal address
10.63 set/announce (0)
+
10.76 set/announce (0)
set/announce Allow announce messages
10.64 set/arcluster (5)
+
10.77 set/arcluster (5)
set/arcluster <node_call> [<node_call> ...] Make
@@ -1051,7 +1459,31 @@ the node_call an AR-Cluster type node
10.65 set/badnode (6)
+
10.78 set/baddx (8)
+
+
+set/baddx <call> Stop words we do not wish to see in the callsign field
+of a dx spot being propagated
+
+
+
+ set/baddx FORSALE VIDEO FR0G
+
+
+
+
+ unset/baddx VIDEO
+
+10.79 set/badnode (6)
set/badnode <node_call> Stop spots from this node_call
@@ -1062,25 +1494,76 @@ going any further. They will not be displayed and they will not be
sent onto other nodes.
the end of a DX spot. If this is the case, use the unset/dxgrid
command to remove the grid squares.
set/badnode K1TTT
+
+
unset/badnode K1TTT
+10.80 set/badspotter (8)
+
+
+set/badspotter <call> Stop spots from this callsign being propagated
+
+
+
+ set/badspotter VE2STN
+
+
+
+ unset/badspotter VE2STN
+
+10.66 set/beep (0)
+
10.81 set/badword (8)
+
+
+set/badword <word> Stop things with this word being propogated
+10.82 set/beep (0)
set/beep Add beeps to terminal messages
10.67 set/clx (5)
+
10.83 set/bbs (5)
+
+
+set/bbs <call> [<call>..]Make <call> a BBS
+10.84 set/clx (5)
set/clx <node_call> [<node_call> ...] Make
@@ -1088,21 +1571,29 @@ the node_call a CLX type node
10.68 set/debug (9)
+
10.85 set/debug (9)
set/debug <name> Add a debug level to the debug set
10.69 set/dx (0)
+
10.86 set/dx (0)
set/dxAllow DX messages to arrive at your terminal
10.70 set/dxgrid (0)
+
10.87 set/dxgrid (0)
set/dxgridAllow grid squares on the end of DX messages
@@ -1111,7 +1602,7 @@ the node_call a CLX type node10.71 set/dxnet (5)
+
10.88 set/dxnet (5)
set/dxnet <node_call> [<node_call> ...] Make
@@ -1119,7 +1610,7 @@ the node_call a DXNet type node
10.72 set/echo (0)
+
10.89 set/echo (0)
set/echo Make the cluster echo your input
@@ -1132,7 +1623,21 @@ to change the setting appropriately.
10.73 set/here (0)
+
10.90 set/email (0)
+
+
+set/email <email_address> Set email address(es) and forward your personals
+10.91 set/here (0)
set/here Set the here flag
@@ -1142,7 +1647,7 @@ callsign. If you are away from your terminal you can use the unset/here
-10.74 set/homenode (0)
+
10.92 set/homenode (0)
set/homenode <node_call> Set your home cluster
@@ -1151,11 +1656,13 @@ around your callsign to indicate you are not available.
to you will normally find their way there should you not be connected.
eg:-
SET/HOMENODE gb7djk
+10.75 set/hops (8)
+
10.93 set/hops (8)
set/hops <node_call> ann|spots|wwv|wcy <n>
@@ -1165,15 +1672,17 @@ Set hop count
eg:
set/hops gb7djk ann 10
set/hops gb7mbc spots 20
+10.76 set/isolate (9)
+
10.94 set/isolate (9)
set/isolate <node call> Isolate a node from the rest of the network
@@ -1185,7 +1694,7 @@ out from it nor goes back into from the rest of the nodes connected to you.
10.77 set/language (0)
+
10.95 set/language (0)
set/language <language> Set the language you wish to use
@@ -1193,7 +1702,7 @@ out from it nor goes back into from the rest of the nodes connected to you.
10.78 set/location (0)
+
10.96 set/location (0)
set/location <lat and long> Set your latitude and longitude
@@ -1201,12 +1710,14 @@ the languages available are en (English) and nl (Dutch).
set/location 54 04 N 2 02 E
+10.79 set/sys_location (9)
+
10.97 set/sys_location (9)
set/sys_location <lat & long> Set your cluster latitude and longitude
@@ -1215,11 +1726,13 @@ the languages available are en (English) and nl (Dutch).
what your latitude and longitude is. If you have not yet done a SET/QRA
then this command will set your QRA locator for you. For example:-
SET/LOCATION 52 22 N 0 57 E
+10.80 set/logininfo (0)
+
10.98 set/logininfo (0)
set/logininfo Show logins and logouts of nodes and users
@@ -1228,7 +1741,7 @@ then this command will set your QRA locator for you. For example:-
can stop these messages by using the unset/logininfo command.
10.81 set/lockout (9)
+
10.99 set/lockout (9)
set/lockout <call> Stop a callsign connecting to the cluster
@@ -1236,18 +1749,20 @@ can stop these messages by using the unset/logininfo command.
10.82 set/name (0)
+
10.100 set/name (0)
set/name <your_name> Set your name
set/name Dirk
+10.83 set/node (9)
+
10.101 set/node (9)
set/node <call> [<call> ...] Make the callsign an AK1A cluster
@@ -1256,15 +1771,17 @@ To allow the user to connect again, use the unset/lockout command.
fed PC Protocol rather normal user commands.
set/spider
set/dxnet
set/clx
set/arcluster
+10.84 set/obscount (9)
+
10.102 set/obscount (9)
set/obscount <count> <node call> Set the 'pump-up' obsolescence counter
@@ -1281,7 +1798,7 @@ what would be the third attempt, that node is disconnected.
default values, if a node has not responded to a ping within 15 minutes,
it is disconnected.
10.85 set/page (0)
+
10.103 set/page (0)
set/page <n> Set the number of lines per page
@@ -1290,25 +1807,47 @@ it is disconnected.
of output from a command is more than this. The default is 20. Setting it
explicitly to 0 will disable paging.
SET/PAGE 30
SET/PAGE 0
+10.104 set/password (0)
+
+
+set/password Set your own password
+10.86 set/password (9)
+
10.105 set/password (9)
set/password <callsign> <string> Set a users password
10.87 set/pinginterval (9)
+can contain any characters.
+
10.106 set/pinginterval (9)
set/pinginterval <time> <node call> Set the ping time to neighbouring nodes
@@ -1323,7 +1862,7 @@ for numbers greater than that.
(as certain cluster software doesn't always notice), see SET/OBSCOUNT
for more information.
10.88 set/privilege (9)
+
10.107 set/privilege (9)
set/privilege <n> <call> [<call> ...] Set the privilege level on a call
@@ -1345,7 +1884,7 @@ to commands are as default:-
10.89 set/spider (5)
+
10.108 set/spider (5)
set/spider <node_call> [<node_call> ...] Make
@@ -1353,12 +1892,12 @@ the node_call a DXSpider type node
10.90 set/sys_qra (9)
+
10.109 set/sys_qra (9)
set/sys_qra <locator> Set your cluster QRA locator
10.91 set/qra (0)
+
10.110 set/qra (0)
set/qra <locator> Set your QRA locator
@@ -1367,22 +1906,43 @@ the node_call a DXSpider type node
SET/QRA JO02LQ
+10.92 set/qth (0)
+
10.111 set/qth (0)
set/qth <your QTH> Set your QTH
set/qth East Dereham, Norfolk
+10.93 set/talk (0)
+
10.112 set/register (9)
+
+
+set/register <call> Mark a user as registered
+10.113 set/talk (0)
set/talk Allow talk messages to be seen at your console
@@ -1390,7 +1950,7 @@ correctly (assuming your locator is correct ;-). For example:-
10.94 set/wcy (0)
+
10.114 set/wcy (0)
set/wcy Allow WCY messages to be seen at your console
@@ -1398,7 +1958,7 @@ talks with the unset/talk command.
10.95 set/wwv (0)
+
10.115 set/wwv (0)
set/wwv Allow WWV messages to be seen at your console
@@ -1406,7 +1966,7 @@ WCY messages with the unset/wcy command.
10.96 set/wx (0)
+
10.116 set/wx (0)
set/wx Allow WX messages to be seen at your console
@@ -1414,7 +1974,15 @@ WWV messages with the unset/wwv command.
10.97 show/badnode (6)
+
10.117 show/baddx (1)
+
+
+show/baddxShow all the bad dx calls in the system
+10.118 show/badnode (6)
show/badnode Show all the bad nodes in the system
@@ -1422,7 +1990,49 @@ WX messages with the unset/wx command.
10.98 show/date (0)
+
10.119 show/badspotter (1)
+
+
+show/badspotter Show all the bad spotters in the system
+10.120 show/badword (1)
+
+
+show/badword Show all the bad words in the system
+10.121 show/configuration (0)
+
+
+show/configuration [<node>] Show all visible nodes and their users
+10.122 show/configuration/node (0)
+
+
+show/configuration/node Show all the nodes connected
+10.123 show/connect (1)
+
+
+show/connect Show all the active connections
+10.124 show/date (0)
show/date [<prefix>|<callsign>] Show
@@ -1435,7 +2045,14 @@ time and UTC as the computer has it right now. If you give some prefixes
then it will show UTC and UTC + the local offset (not including DST) at
the prefixes or callsigns that you specify.
10.99 show/dx (0)
+
10.125 show/debug (9)
+
+
+show/debug Show what levels of debug you are logging
+10.126 show/dx (0)
show/dx [options] interrogate the spot database
@@ -1445,6 +2062,7 @@ the prefixes or callsigns that you specify.
on <band> - eg 160m 20m 2m 23cm 6mm
@@ -1477,8 +2095,10 @@ iota [<iota>] - If the iota island number is missing it will
qra [<locator>] - this will look for the specific locator if
you specify one or else anything that looks like a locator.
+
SH/DX 9m0
@@ -1489,8 +2109,9 @@ qra [<locator>] - this will look for the specific locator if
SH/DX iota eu-064
SH/DX qra jn86
+10.100 show/dxcc (0)
+
10.127 show/dxcc (0)
show/dxcc <prefix> Interrogate the spot database by country
@@ -1501,13 +2122,23 @@ and then displays all the spots as per SH/DX for that country.
SH/DXCC G
SH/DXCC W on 20m info iota
+10.101 show/files (0)
+
10.128 sh/dxstats (0)
+
+
+sh/dxstats Show the DX Statistics for last 31 days
+10.129 show/files (0)
show/files [<filearea> [<string>]] List
@@ -1517,20 +2148,24 @@ the contents of a filearea
available on the system. To see the contents of a particular file
area type:-
SH/FILES <filearea>
+
SH/FILES bulletins arld*
+10.102 show/filter (0)
+
10.130 show/filter (0)
show/filter Show the filters you have set
@@ -1538,14 +2173,28 @@ string to see a selection of files in a filearea eg:-
10.103 show/filter (extended for sysops) (5)
+
10.131 show/filter (extended for sysops) (5)
show/filter <callsign> Show the filters set by <callsign>
10.104 show/hops (8)
+
10.132 show/hfstats (0)
+
+
+show/hfstats Show the HF DX Statistics for last 31 days
+10.133 show/hftable (0)
+
+
+show/hftable Show the HF DX Spotter Table for your country
+10.134 show/hops (8)
show/hops <node_call> [ann|spots|wcy|wwv|] Show the hop counts for a node
@@ -1554,14 +2203,14 @@ displays all the filters set - for all the various categories.
which category you want to see. If you leave the category out then
all the categories will be listed.
10.105 show/isolate (1)
+
10.135 show/isolate (1)
show/isolate Show a list of isolated nodes
10.106 show/lockout (9)
+
10.136 show/lockout (9)
show/lockout Show a list of excluded callsigns
@@ -1569,7 +2218,16 @@ all the categories will be listed.
10.107 show/moon (0)
+
10.137 show/log (8)
+
+
+show/log [<callsign>] Show excerpts from the system log
+10.138 show/moon (0)
show/moon [<prefix>|<callsign>] Show moon
@@ -1587,12 +2245,14 @@ distance of 385,000Km due to the ellipsoidal nature of the orbit.
that you are connected to.
SH/MOON
SH/MOON G1TLH W5UN
+10.108 show/muf (0)
+
10.139 show/muf (0)
show/muf <prefix> [<hours>][long] Show
@@ -1628,11 +2288,14 @@ to be noisy.
can specify anything up to 24 hours worth of data by appending the no of
hours required after the prefix. For example:-
SH/MUF W
+
RxSens: -123 dBM SFI: 159 R: 193 Month: 10 Day: 21
Power : 20 dBW Distance: 6283 km Delay: 22.4 ms
@@ -1643,25 +2306,51 @@ hours required after the prefix. For example:-
18 23 11.5 -35 mS0+ mS2 S3
19 0 11.2 -41 mS0+ mS2 S3
+
SH/MUF W 24
+
SH/MUF W L 24
SH/MUF W 24 Long
+10.109 show/node (1)
+
10.140 show/newconfiguration (0)
+
+
+show/newconfiguration [<node>] Show all the nodes and users visible
+10.141 show/newconfiguration/node (0)
+
+
+show/newconfiguration/node Show all the nodes connected locally
+10.142 show/node (1)
show/node [<node_call> ...] Show the type and version
@@ -1671,7 +2360,7 @@ number of nodes
command line. If no callsigns are specified then a sorted list of all
the non-user callsigns known to the system will be displayed.
10.110 show/prefix (0)
+
10.143 show/prefix (0)
show/prefix <callsign> Interrogate the prefix database
@@ -1683,7 +2372,7 @@ together with the internal country no, the CQ and ITU regions.
10.111 show/program (5)
+
10.144 show/program (5)
show/program Show the locations of all the included program modules
@@ -1691,7 +2380,7 @@ together with the internal country no, the CQ and ITU regions.
10.112 show/qra (0)
+
10.145 show/qra (0)
show/qra <locator> [<locator>] Show the distance
@@ -1703,10 +2392,12 @@ distance and bearing between two locators or (if only one locator is
given on the command line) the distance and beraing from your station
to the locator. For example:-
SH/QRA IO92QL
SH/QRA JN06 IN73
+
SH/QRA 52 41 N 0 58 E
+10.113 show/qrz (0)
+
10.146 show/qrz (0)
show/qrz <callsign> Show any callbook details on a callsign
@@ -1727,7 +2420,26 @@ SH/QRA 52 41 N 0 58 E
and returns any information available for that callsign. This service
is provided for users of this software by http://www.qrz.com
10.114 show/satellite (0)
+
10.147 show/registered (9)
+
+
+show/registered [<prefix>[ Show the registered users
+10.148 show/route (0)
+
+
+show/route <callsign> Show the route to <callsign>
+
+
+
+ sh/route n2tly
+
+10.149 show/satellite (0)
show/satellite <name> [<hours> <interval>]
@@ -1745,12 +2457,14 @@ limits.
SH/SAT AO-10
SH/SAT FENGYUN1 12 2
+10.115 show/sun (0)
+
10.150 show/sun (0)
show/sun [<prefix>|<callsign>] Show
@@ -1766,12 +2480,14 @@ together with the current azimuth and elevation.
that you are connected to.
SH/SUN
SH/SUN G1TLH K9CW ZS
+10.116 show/time (0)
+
10.151 show/time (0)
show/time [<prefix>|<callsign>] Show
@@ -1782,7 +2498,21 @@ time and UTC as the computer has it right now. If you give some prefixes
then it will show UTC and UTC + the local offset (not including DST) at
the prefixes or callsigns that you specify.
10.117 show/wcy (0)
+
10.152 show/vhfstats (0)
+
+
+show/vhfstats Show the VHF DX Statistics for last 31 days
+10.153 show/vhftable (0)
+
+
+show/vhftable Show the VHF DX Spotter Table for your country
+10.154 show/wcy (0)
show/wcy Show the last 10 WCY broadcasts
@@ -1790,7 +2520,7 @@ the prefixes or callsigns that you specify.
10.118 show/wwv (0)
+
10.155 show/wwv (0)
show/wwv Show the last 10 WWV broadcasts
@@ -1799,7 +2529,7 @@ the prefixes or callsigns that you specify.
10.119 shutdown (5)
+
10.156 shutdown (5)
shutdown Shutdown the cluster
@@ -1807,7 +2537,7 @@ the prefixes or callsigns that you specify.
10.120 spoof (9)
+
10.157 spoof (9)
spoof <callsign> <command> Run commands as another user
@@ -1817,7 +2547,7 @@ issue commands as if you were a different user. This is very useful for the
kind of things that users seem to always get wrong.. like home_node for
example.
10.121 stat/db (5)
+
10.158 stat/db (5)
stat/db <dbname> Show the status of a database
@@ -1826,7 +2556,7 @@ example.
10.122 stat/channel (5)
+
10.159 stat/channel (5)
stat/channel <callsign> Show the status of a channel on the cluster
@@ -1835,7 +2565,7 @@ This command is unlikely to be of much use to anyone other than a sysop.
you are on or else for the callsign that you asked for.
10.123 stat/msg (5)
+
10.160 stat/msg (5)
stat/msg <msgno> Show the status of a message
@@ -1843,7 +2573,20 @@ you are on or else for the callsign that you asked for.
10.124 stat/user (5)
+
10.161 stat/route_node (5)
+
+
+stat/route_node <callsign> Show the data in a Route::Node object
+10.162 stat/route_user (5)
+
+
+stat/route_user <callsign> Show the data in a Route::User object
+10.163 stat/user (5)
stat/user <callsign> Show the full status of a user
@@ -1852,7 +2595,7 @@ such as to whom it has been forwarded, its size, origin etc etc.
and stuff.
10.125 sysop (0)
+
10.164 sysop (0)
sysop Regain your privileges if you login remotely
@@ -1868,23 +2611,27 @@ required in the correct order. You may intersperse those characters
with others to obscure your reply for any watchers. For example (and
these values are for explanation :-):
password = 012345678901234567890123456789
> sysop
22 10 15 17 3
+
aa2bbbb0ccc5ddd7xxx3n
or 2 0 5 7 3
or 20573
+10.126 talk (0)
+
10.165 talk (0)
talk <callsign> Enter talk mode with <callsign>
@@ -1911,17 +2658,21 @@ terminal.
/DX 14001 G1TLH What's a B class licensee doing on 20m CW?
/HELP talk
+
/EX
+10.127 type (0)
+
10.166 type (0)
type <filearea>/<name> Look at a file in one of the fileareas
@@ -1930,13 +2681,15 @@ command with a '/' character, eg:-
filearea 'bulletins' you want to look at file 'arld051' you would
enter:-
TYPE bulletins/arld051
+10.128 who (0)
+
10.167 who (0)
who Show who is physically connected locally
@@ -1944,7 +2697,7 @@ list of content.
10.129 wx (0)
+
10.168 wx (0)
wx <text> Send a weather message to local users
@@ -1953,7 +2706,7 @@ what sort of connection they have
10.130 wx (enhanced for sysops) (5)
+
10.169 wx (enhanced for sysops) (5)
wx sysop <text> Send a weather message to other clusters only