The DXSpider Installation and Administration Manual
Ian Maude, G0VGS, (ianmaude@btinternet.com)
- Version 1.28 January 2001
+ Version 1.29 January 2001
A reference for SysOps of the DXSpider DXCluster program.
______________________________________________________________________
8. Other filters
8.1 Filtering Mail
- 8.2 Filtering DX callouts
+ 8.2 Filtering DX callouts (Depricated)
8.3 Filtering words from text fields in Announce, Talk and DX spots
9. Information, files and useful programs
11.63 set/address (0)
11.64 set/announce (0)
11.65 set/arcluster (5)
- 11.66 set/badnode (6)
- 11.67 set/beep (0)
- 11.68 set/clx (5)
- 11.69 set/debug (9)
- 11.70 set/dx (0)
- 11.71 set/dxgrid (0)
- 11.72 set/dxnet (5)
- 11.73 set/echo (0)
- 11.74 set/here (0)
- 11.75 set/homenode (0)
- 11.76 set/hops (8)
- 11.77 set/isolate (9)
- 11.78 set/language (0)
- 11.79 set/location (0)
- 11.80 set/sys_location (9)
- 11.81 set/logininfo (0)
- 11.82 set/lockout (9)
- 11.83 set/name (0)
- 11.84 set/node (9)
- 11.85 set/obscount (9)
- 11.86 set/page (0)
- 11.87 set/password (9)
- 11.88 set/pinginterval (9)
- 11.89 set/privilege (9)
- 11.90 set/spider (5)
- 11.91 set/sys_qra (9)
- 11.92 set/qra (0)
- 11.93 set/qth (0)
- 11.94 set/talk (0)
- 11.95 set/wcy (0)
- 11.96 set/wwv (0)
- 11.97 set/wx (0)
- 11.98 show/badnode (6)
- 11.99 show/date (0)
- 11.100 show/dx (0)
- 11.101 show/dxcc (0)
- 11.102 show/files (0)
- 11.103 show/filter (0)
- 11.104 show/filter (extended for sysops) (5)
- 11.105 show/hops (8)
- 11.106 show/isolate (1)
- 11.107 show/lockout (9)
- 11.108 show/moon (0)
- 11.109 show/muf (0)
- 11.110 show/node (1)
- 11.111 show/prefix (0)
- 11.112 show/program (5)
- 11.113 show/qra (0)
- 11.114 show/qrz (0)
- 11.115 show/satellite (0)
- 11.116 show/sun (0)
- 11.117 show/time (0)
- 11.118 show/wcy (0)
- 11.119 show/wwv (0)
- 11.120 shutdown (5)
- 11.121 spoof (9)
- 11.122 stat/db (5)
- 11.123 stat/channel (5)
- 11.124 stat/msg (5)
- 11.125 stat/user (5)
- 11.126 sysop (0)
- 11.127 talk (0)
- 11.128 type (0)
- 11.129 who (0)
- 11.130 wx (0)
- 11.131 wx (enhanced for sysops) (5)
+ 11.66 set/baddx (8)
+ 11.67 set/badnode (6)
+ 11.68 set/badspotter (8)
+ 11.69 set/beep (0)
+ 11.70 set/clx (5)
+ 11.71 set/debug (9)
+ 11.72 set/dx (0)
+ 11.73 set/dxgrid (0)
+ 11.74 set/dxnet (5)
+ 11.75 set/echo (0)
+ 11.76 set/here (0)
+ 11.77 set/homenode (0)
+ 11.78 set/hops (8)
+ 11.79 set/isolate (9)
+ 11.80 set/language (0)
+ 11.81 set/location (0)
+ 11.82 set/sys_location (9)
+ 11.83 set/logininfo (0)
+ 11.84 set/lockout (9)
+ 11.85 set/name (0)
+ 11.86 set/node (9)
+ 11.87 set/obscount (9)
+ 11.88 set/page (0)
+ 11.89 set/password (9)
+ 11.90 set/pinginterval (9)
+ 11.91 set/privilege (9)
+ 11.92 set/spider (5)
+ 11.93 set/sys_qra (9)
+ 11.94 set/qra (0)
+ 11.95 set/qth (0)
+ 11.96 set/talk (0)
+ 11.97 set/wcy (0)
+ 11.98 set/wwv (0)
+ 11.99 set/wx (0)
+ 11.100 show/baddx (1)
+ 11.101 show/badnode (6)
+ 11.102 show/badspotter (1)
+ 11.103 show/date (0)
+ 11.104 show/dx (0)
+ 11.105 show/dxcc (0)
+ 11.106 show/files (0)
+ 11.107 show/filter (0)
+ 11.108 show/filter (extended for sysops) (5)
+ 11.109 show/hops (8)
+ 11.110 show/isolate (1)
+ 11.111 show/lockout (9)
+ 11.112 show/moon (0)
+ 11.113 show/muf (0)
+ 11.114 show/node (1)
+ 11.115 show/prefix (0)
+ 11.116 show/program (5)
+ 11.117 show/qra (0)
+ 11.118 show/qrz (0)
+ 11.119 show/route (0)
+ 11.120 show/satellite (0)
+ 11.121 show/sun (0)
+ 11.122 show/time (0)
+ 11.123 show/wcy (0)
+ 11.124 show/wwv (0)
+ 11.125 shutdown (5)
+ 11.126 spoof (9)
+ 11.127 stat/db (5)
+ 11.128 stat/channel (5)
+ 11.129 stat/msg (5)
+ 11.130 stat/user (5)
+ 11.131 sysop (0)
+ 11.132 talk (0)
+ 11.133 type (0)
+ 11.134 who (0)
+ 11.135 wx (0)
+ 11.136 wx (enhanced for sysops) (5)
______________________________________________________________________
1\b1.\b. I\bIn\bns\bst\bta\bal\bll\bla\bat\bti\bio\bon\bn (\b(O\bOr\bri\big\bgi\bin\bna\bal\bl v\bve\ber\brs\bsi\bio\bon\bn b\bby\by I\bIa\bai\bin\bn P\bPh\bhi\bil\bll\bli\bip\bps\bs,\b, G\bG0\b0R\bRD\bDI\bI)\b)
- Last modified: 02 January 2001 by Ian Maude, G0VGS
+ Last modified: 13 January 2001 by Ian Maude, G0VGS
1\b1.\b.1\b1.\b. I\bIn\bnt\btr\bro\bod\bdu\buc\bct\bti\bio\bon\bn
_\bs_\by_\bs_\bo_\bp. You can call it anything you wish. Depending on your security
requirements you may wish to use an existing user, however this is
your own choice.
+
+
+
+
# adduser -m sysop
- # chown -R sysop.spider spider
- # find . -type d -exec chmod 2775 {} \;
- # find . -type f -exec chmod 775 {} \;
+
+ # chown -R sysop.spider spider
+ # find . -type d -exec chmod 2775 {} \;
+ # find . -type f -exec chmod 775 {} \;
$ cd ../perl
+
+
+
+
Now type the following command which creates the basic user file with
you as the sysop.
- G0VGS de GB7MBC 19-Nov-1999 2150Z >
+ G0VGS de GB7MBC 19-Nov-1999 2150Z >
shutdown
+
+
+
and both the cluster and the client should return to Linux prompts.
- spdlogin stream tcp nowait root /usr/sbin/tcpd /spider/src/client login telnet
+ spdlogin stream tcp nowait root /usr/sbin/tcpd /spider/src/client login telnet
+
Now login as _\bs_\by_\bs_\bo_\bp and cd spider/perl. You can test that spider is
accepting telnet logins by issuing the following command ....
- set/node (AK1A type)
- set/spider
- set/dxnet
- set/clx
+
+
+ set/node (AK1A type)
+ set/spider
+ set/dxnet
+ set/clx
- set/node gb7baa
+ set/node gb7baa
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
# All lines starting with a # are ignored, as are completely
blank lines.
- timeout 15
- connect telnet dirkl.tobit.co.uk
- # tell GB7DJK-1 that it is connected to GB7DJK
- # you can leave this out if you call this script 'gb7djk'
- client gb7djk telnet
+
+
+ timeout 15
+ connect telnet dirkl.tobit.co.uk
+ # tell GB7DJK-1 that it is connected to GB7DJK
+ # you can leave this out if you call this script 'gb7djk'
+ client gb7djk telnet
+
+
+
Both these examples assume that everything is set up properly at the
avoid this use the following line ...
+
+
+
+
+
+
In a script, this might look like ...
+
The callsign involved will be the callsign of the cluster node you are
going to connect to. This will now check every 10 minutes to see if
gb7xxx is connected, if it is then nothing will be done. If it is
- #
- # hop table construction
- #
- package DXProt;
- # default hopcount to use
- $def_hopcount = 5;
- # some variable hop counts based on message type
- %hopcount =
- (
- 11 => 10,
- 16 => 10,
- 17 => 10,
- 19 => 10,
- 21 => 10,
- );
- # the per node hop control thingy
- %nodehops =
- GB7ADX => { 11 => 8,
- 12 => 8,
- 16 => 8,
- 17 => 8,
- 19 => 8,
- 21 => 8,
- },
- GB7UDX => { 11 => 8,
- 12 => 8,
- 16 => 8,
- 17 => 8,
- 19 => 8,
- 21 => 8,
- },
- GB7BAA => {
- 11 => 5,
- 12 => 8,
- 16 => 8,
- 17 => 8,
- 19 => 8,
- 21 => 8,
- },
- };
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ #
+ # hop table construction
+ #
+
+ package DXProt;
+
+ # default hopcount to use
+ $def_hopcount = 5;
+
+ # some variable hop counts based on message type
+ %hopcount =
+ (
+ 11 => 10,
+ 16 => 10,
+ 17 => 10,
+ 19 => 10,
+ 21 => 10,
+ );
+
+
+ # the per node hop control thingy
+
+
+ %nodehops =
+
+ GB7ADX => { 11 => 8,
+ 12 => 8,
+ 16 => 8,
+ 17 => 8,
+ 19 => 8,
+ 21 => 8,
+ },
+
+ GB7UDX => { 11 => 8,
+ 12 => 8,
+ 16 => 8,
+ 17 => 8,
+ 19 => 8,
+ 21 => 8,
+ },
+ GB7BAA => {
+ 11 => 5,
+ 12 => 8,
+ 16 => 8,
+ 17 => 8,
+ 19 => 8,
+ 21 => 8,
+ },
+ };
+
+
will bring your changes into effect.
+
5\b5.\b.2\b2.\b. I\bIs\bso\bol\bla\bat\bti\bin\bng\bg n\bne\bet\btw\bwo\bor\brk\bks\bs
It is possible to isolate networks from each other on a "gateway" node
This is very simple and only 2 possible states exist, accept (1) or
drop (0).
+
The second element is the field_no. There are 13 possiblities to
choose from here ....
- 0 = frequency
- 1 = call
- 2 = date in unix format
- 3 = comment
- 4 = spotter
- 5 = spotted dxcc country
- 6 = spotter's dxcc country
- 7 = origin
- 8 = spotted itu
- 9 = spotted cq
- 10 = spotter's itu
- 11 = spotter's cq
- 12 = callsign of the channel on which the spot has appeared
+
+
+
+
+
+ 0 = frequency
+ 1 = call
+ 2 = date in unix format
+ 3 = comment
+ 4 = spotter
+ 5 = spotted dxcc country
+ 6 = spotter's dxcc country
+ 7 = origin
+ 8 = spotted itu
+ 9 = spotted cq
+ 10 = spotter's itu
+ 11 = spotter's cq
+ 12 = callsign of the channel on which the spot has appeared
a list of letters separated by the pipe symbol.
+
What this line does is tell the program to drop any spots posted by
anyone in the USA, Canada or Japan.
[ 0, 0, 'd', 0 ]
];
+
+
+
+
In this example, only the prefixes listed will be allowed. It is
possible to be quite specific. The Dutch prefix "P" is followed by
several secondary identifiers which are allowed. So, in the example,
etc in a particular country.
- 8\b8.\b.2\b2.\b. F\bFi\bil\blt\bte\ber\bri\bin\bng\bg D\bDX\bX c\bca\bal\bll\blo\bou\but\bts\bs
+ 8\b8.\b.2\b2.\b. F\bFi\bil\blt\bte\ber\bri\bin\bng\bg D\bDX\bX c\bca\bal\bll\blo\bou\but\bts\bs (\b(D\bDe\bep\bpr\bri\bic\bca\bat\bte\bed\bd)\b)
+
+ _\bF_\br_\bo_\bm _\bv_\be_\br_\bs_\bi_\bo_\bn _\b1_\b._\b4_\b7_\b, _\bt_\bh_\bi_\bs _\bm_\be_\bt_\bh_\bo_\bd _\bi_\bs _\br_\be_\bp_\bl_\ba_\bc_\be_\bd _\bb_\by _\bt_\bh_\be _\bc_\bo_\bm_\bm_\ba_\bn_\bd _\bs_\be_\bt_\b/_\bb_\ba_\bd_\bd_\bx
+
In the same way as mail, there are some types of spot we do not wish
to pass on to users or linked cluster nodes. In the /spider/data
-
-
-
# the list of dx spot addresses that we don't store and don't pass on
repository. You do this with the command below ...
- cvs -d:pserver:anonymous@cvs.DXSpider.sourceforge.net:/cvsroot/DXSpider login
+ cvs -d:pserver:anonymous@cvs.DXSpider.sourceforge.net:/cvsroot/dxspider login
current directory.
- cvs -z3 -d:pserver:anonymous@cvs.DXSpider.sourceforge.net:/cvsroot/DXSpider co spider
+ cvs -z3 -d:pserver:anonymous@cvs.DXSpider.sourceforge.net:/cvsroot/dxspider co spider
+
some examples:-
- acc/ann dest 6MUK
- acc/ann 2 by_zone 14,15,16
- (this could be all on one line: acc/ann dest 6MUK or by_zone 14,15,16)
+
+ acc/ann dest 6MUK
+ acc/ann 2 by_zone 14,15,16
+ (this could be all on one line: acc/ann dest 6MUK or by_zone 14,15,16)
+
or
- acc/ann by G,M,2
+
+ acc/ann by G,M,2
+
stations. You can use the tag 'all' to accept everything eg:
- acc/ann all
+
+ acc/ann all
+
the default for nodes and users eg:-
- accept/ann by G,M,2
- accept/ann input node_default by G,M,2
- accept/ann user_default by G,M,2
+ accept/ann by G,M,2
+ accept/ann input node_default by G,M,2
+ accept/ann user_default by G,M,2
Create an 'accept this spot' line for a filter.
+
An accept filter line means that if the spot matches this filter it is
passed onto the user. See HELP FILTERS for more info. Please read this
to understand how filters work - it will save a lot of grief later on.
You can use any of the following things in this line:-
- freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
- on <range> same as 'freq'
- call <prefixes> eg: G,PA,HB9
- info <string> eg: iota or qsl
- by <prefixes>
- call_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- call_itu <numbers>
- call_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- origin <prefixes>
- channel <prefixes>
+
+ freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
+ on <range> same as 'freq'
+ call <prefixes> eg: G,PA,HB9
+ info <string> eg: iota or qsl
+ by <prefixes>
+ call_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ call_itu <numbers>
+ call_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ origin <prefixes>
+ channel <prefixes>
+
some examples:-
- acc/spot 1 on hf/cw
- acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+
+ acc/spot 1 on hf/cw
+ acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+
You can use the tag 'all' to accept everything, eg:
- acc/spot 3 all
+
+ acc/spot 3 all
+
a
\bac
\bcc
\bce
\bep
\bpt
\bt/
\b/s
\bsp
\bpo
\bot
\bts
\bs <
\b<c
\bca
\bal
\bll
\bl>
\b> [
\b[i
\bin
\bnp
\bpu
\but
\bt]
\b] [
\b[0
\b0-
\b-9
\b9]
\b] <
\b<p
\bpa
\bat
\btt
\bte
\ber
\brn
\bn>
\b> Spot filter sysop version
-
This version allows a sysop to set a filter for a callsign as well as
the default for nodes and users eg:-
- accept/spot db0sue-7 1 by_zone 14,15,16
- accept/spot node_default all
- set/hops node_default 10
- accept/spot user_default by G,M,2
+ accept/spot db0sue-7 1 by_zone 14,15,16
+ accept/spot node_default all
+ set/hops node_default 10
+
+ accept/spot user_default by G,M,2
+
can filter on the following fields:-
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- channel <prefixes>
+
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
+
the default for nodes and users eg:-
- accept/wcy node_default all
- set/hops node_default 10
+
+ accept/wcy node_default all
+ set/hops node_default 10
+
+
can filter on the following fields:-
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- channel <prefixes>
+
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
+
+
for example
- accept/wwv by_zone 4
+
+ accept/wwv by_zone 4
+
the default for nodes and users eg:-
- accept/wwv db0sue-7 1 by_zone 4
- accept/wwv node_default all
- set/hops node_default 10
- accept/wwv user_default by W,K
+ accept/wwv db0sue-7 1 by_zone 4
+ accept/wwv node_default all
+ set/hops node_default 10
+
+ accept/wwv user_default by W,K
+
Send an announcement to LOCAL users only, where <text> is the text of
the announcement you wish to broadcast
-
1\b11\b1.\b.1\b10\b0.\b. a\ban\bnn\bno\bou\bun\bnc\bce\be f\bfu\bul\bll\bl (\b(0\b0)\b)
a\ban\bnn\bno\bou\bun\bnc\bce\be f\bfu\bul\bll\bl <\b<t\bte\bex\bxt\bt>\b> Send an announcement cluster wide
Search the help database for <string> (it isn't case sensitive), and
print the names of all the commands that may be relevant.
+
1\b11\b1.\b.1\b13\b3.\b. b\bby\bye\be (\b(0\b0)\b)
b\bby\bye\be Exit from the cluster
using these commmands:-
- catchup GB7DJK all
- catchup GB7DJK 300 301 302 303 500-510
+
+ catchup GB7DJK all
+ catchup GB7DJK 300 301 302 303 500-510
+
and to undo what you have just done:-
- uncatchup GB7DJK all
- uncatchup GB7DJK 300 301 302 303 500-510
+
+ uncatchup GB7DJK all
+ uncatchup GB7DJK 300 301 302 303 500-510
+
+
If you have a filter:-
- acc/spot 1 on hf/cw
- acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+
+ acc/spot 1 on hf/cw
+ acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+
and you say:-
- clear/spot 1
+
+ clear/spot 1
+
- acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+ acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+
If you do:
- clear/spot all
+
+ clear/spot all
+
Databases can exist offsite. To define a database that lives on
another node do:
+
DBCREATE buckmaster remote gb7dxc
Remote databases cannot be chained; however, the last database in a a
],
-
-
to allow
SH/BUCK g1tlh
For example:
-
DBREMOVE oblast
will remove the oblast database from the system and it will also
enquiry such as:
- SH/BUCK G1TLH
+
+ SH/BUCK G1TLH
+
SHOW/COMMAND to find out) you can do the same thing with:
- DBSHOW buck G1TLH
+
+ DBSHOW buck G1TLH
+
d\bdi\bir\bre\bec\bct\bto\bor\bry\by s\bsu\bub\bbj\bje\bec\bct\bt <\b<s\bst\btr\bri\bin\bng\bg>\b> List all messages with <string> in subject
d\bdi\bir\bre\bec\bct\bto\bor\bry\by <\b<n\bnn\bn>\b> List last <nn> messages
d\bdi\bir\bre\bec\bct\bto\bor\bry\by <\b<f\bfr\bro\bom\bm>\b>-\b-<\b<t\bto\bo>\b> List messages <from> message <to> message
+
+
List the messages in the messages directory.
If there is a 'p' one space after the message number then it is a
You can combine some of the various directory commands together eg:-
- DIR TO G1TLH 5
- or
- DIR SUBJECT IOTA 200-250
+
+ DIR TO G1TLH 5
+ or
+ DIR SUBJECT IOTA 200-250
+
syntax:-
- DIR/T G1* 10
- DIR/S QSL 10-100 5
+ DIR/T G1* 10
+ DIR/S QSL 10-100 5
+
enter the <freq> and the <call> either way round.
- DX FR0G 144.600
- DX 144.600 FR0G
- DX 144600 FR0G
+
+ DX FR0G 144.600
+ DX 144.600 FR0G
+ DX 144600 FR0G
+
the command and they will be added to the spot.
- DX FR0G 144600 this is a test
+
+ DX FR0G 144600 this is a test
You can credit someone else by saying:-
- DX by G1TLH FR0G 144.600 he isn't on the cluster
+
+ DX by G1TLH FR0G 144.600 he isn't on the cluster
+
e\bex\bxp\bpo\bor\brt\bt <\b<m\bms\bsg\bgn\bno\bo>\b> <\b<f\bfi\bil\ble\ben\bna\bam\bme\be>\b> Export a message to a file
-
Export a message to a file. This command can only be executed on a
local console with a fully privileged user. The file produced will be
in a form ready to be imported back into the cluster by placing it in
clusters
-
This command sends out any information held in the user file which can
be broadcast in PC41 protocol packets. This information is Name, QTH,
Location and Homenode. PC41s are only sent for the information that is
Look at the APROPOS <string> command which will search the help
database for the <string> you specify and give you a list of likely
commands to look at with HELP.
-
-
1\b11\b1.\b.3\b32\b2.\b. i\bin\bni\bit\bt (\b(5\b5)\b)
i\bin\bni\bit\bt <\b<n\bno\bod\bde\be c\bca\bal\bll\bl>\b> Re-initialise a link to an AK1A compatible node
As a sysop you can kill any message on the system.
- 1\b11\b1.\b.3\b35\b5.\b. k\bki\bil\bll\bl f\bfu\bul\bll\bl <\b<m\bms\bsg\bgn\bno\bo>\b> [\b[<\b<m\bms\bsg\bgn\bno\bo>\b>]\b] D\bDe\bel\ble\bet\bte\be a\ba m\bme\bes\bss\bsa\bag\bge\be f\bfr\bro\bom\bm t\bth\bhe\be w\bwh\bho\bol\ble\be
- c\bcl\blu\bus\bst\bte\ber\br k\bki\bil\bll\bl f\bfu\bul\bll\bl (\b(5\b5)\b)
+ 1\b11\b1.\b.3\b35\b5.\b. k\bki\bil\bll\bl f\bfu\bul\bll\bl (\b(5\b5)\b)
+
+ k\bki\bil\bll\bl f\bfu\bul\bll\bl <\b<m\bms\bsg\bgn\bno\bo>\b> [\b[<\b<m\bms\bsg\bgn\bno\bo>\b>]\b] Delete a message from the whole cluster
+
Delete a message (usually a 'bulletin') from the whole cluster system.
same subject will be deleted. Beware!
-
1\b11\b1.\b.3\b36\b6.\b. l\bli\bin\bnk\bks\bs (\b(0\b0)\b)
l\bli\bin\bnk\bks\bs Show which nodes are physically connected
Reload the /spider/cmd/Aliases file after you have editted it. You
will need to do this if you change this file whilst the cluster is
running in order for the changes to take effect.
+ 1\b11\b1.\b.3\b38\b8.\b. l\blo\boa\bad\bd/\b/b\bba\bad\bdd\bdx\bx (\b(9\b9)\b)
+ l\blo\boa\bad\bd/\b/b\bba\bad\bdd\bdx\bx Reload the bad DX table
- 1\b11\b1.\b.3\b38\b8.\b. l\blo\boa\bad\bd/\b/b\bba\bad\bdd\bdx\bx R\bRe\bel\blo\boa\bad\bd t\bth\bhe\be b\bba\bad\bd D\bDX\bX t\bta\bab\bbl\ble\be l\blo\boa\bad\bd/\b/b\bba\bad\bdd\bdx\bx (\b(9\b9)\b)
-
Reload the /spider/data/baddx.pl file if you have changed it manually
whilst the cluster is running. This table contains the DX Calls that,
if spotted, will not be passed on. FR0G and TEST are classic examples.
whilst the cluster is running.
-
-
-
1\b11\b1.\b.4\b42\b2.\b. l\blo\boa\bad\bd/\b/c\bcm\bmd\bd_\b_c\bca\bac\bch\bhe\be (\b(9\b9)\b)
l\blo\boa\bad\bd/\b/c\bcm\bmd\bd_\b_c\bca\bac\bch\bhe\be Reload the automatic command cache
Alter message parameters like To, From, Subject, whether private or
bulletin or return receipt (RR) is required or whether to keep this
message from timing out.
+
+
+
MSG TO <msgno> <call> - change TO callsign to <call>
MSG FRom <msgno> <call> - change FROM callsign to <call>
MSG PRrivate <msgno> - set private flag
1\b11\b1.\b.4\b49\b9.\b. p\bpi\bin\bng\bg (\b(1\b1)\b)
- p\bpi\bin\bng\bg <\b<n\bno\bod\bde\be>\b> Send a ping command to another cluster node
+ p\bpi\bin\bng\bg <\b<n\bno\bod\bde\be>\b> Check the link quality between nodes
- This command is used to estimate the quality of the link to another
- cluster. The time returned is the length of time taken for a PC51 to
- go to another cluster and be returned.
+ his command allows you to send a frame to another cluster node on the
+ network and get a return frame. The time it takes to do this is a
+ good indication of the quality of the link. The actual time it takes
+ is output to the console in seconds. Any visible cluster node can be
+ PINGed.
- Any visible cluster node can be PINGed.
1\b11\b1.\b.5\b50\b0.\b. r\brc\bcm\bmd\bd (\b(1\b1)\b)
+
+
1\b11\b1.\b.5\b52\b2.\b. r\bre\bea\bad\bd (\b(e\bex\bxt\bte\ben\bnd\bde\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(5\b5)\b)
r\bre\bea\bad\bd <\b<m\bms\bsg\bgn\bno\bo>\b> Read a message on the system
You can use any of the following things in this line:-
- info <string> eg: iota or qsl
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- channel <prefixes>
- wx 1 filter WX announces
- dest <prefixes> eg: 6MUK,WDX (distros)
+
+ info <string> eg: iota or qsl
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
+ wx 1 filter WX announces
+ dest <prefixes> eg: 6MUK,WDX (distros)
+
some examples:-
- rej/ann by_zone 14,15,16 and not by G,M,2
+
+ rej/ann by_zone 14,15,16 and not by G,M,2
+
You can use the tag 'all' to reject everything eg:
- rej/ann all
+
+ rej/ann all
+
+
but this probably for advanced users...
r
\bre
\bej
\bje
\bec
\bct
\bt/
\b/a
\ban
\bnn
\bno
\bou
\bun
\bnc
\bce
\be <
\b<c
\bca
\bal
\bll
\bl>
\b> [
\b[i
\bin
\bnp
\bpu
\but
\bt]
\b] [
\b[0
\b0-
\b-9
\b9]
\b] <
\b<p
\bpa
\bat
\btt
\bte
\ber
\brn
\bn>
\b> Announce filter sysop
version
-
This version allows a sysop to set a filter for a callsign as well as
the default for nodes and users eg:-
- reject/ann by G,M,2
- reject/ann input node_default by G,M,2
- reject/ann user_default by G,M,2
+
+ reject/ann by G,M,2
+ reject/ann input node_default by G,M,2
+ reject/ann user_default by G,M,2
+
r
\bre
\bej
\bje
\bec
\bct
\bt/
\b/s
\bsp
\bpo
\bot
\bts
\bs [
\b[0
\b0-
\b-9
\b9]
\b] <
\b<p
\bpa
\bat
\btt
\bte
\ber
\brn
\bn>
\b> Set a reject filter line for spots
- Create an 'reject this spot' line for a filter.
+ Create a 'reject this spot' line for a filter.
- An reject filter line means that if the spot matches this filter it is
+ A reject filter line means that if the spot matches this filter it is
dumped (not passed on). See HELP FILTERS for more info. Please read
this to understand how filters work - it will save a lot of grief
later on.
You can use any of the following things in this line:-
- freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
- on <range> same as 'freq'
- call <prefixes> eg: G,PA,HB9
- info <string> eg: iota or qsl
- by <prefixes>
- call_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- call_itu <numbers>
- call_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- origin <prefixes>
- channel <prefixes>
+
+ freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
+ on <range> same as 'freq'
+ call <prefixes> eg: G,PA,HB9
+ info <string> eg: iota or qsl
+ by <prefixes>
+ call_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ call_itu <numbers>
+ call_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ origin <prefixes>
+ channel <prefixes>
+
some examples:-
- rej/spot 1 on hf
- rej/spot 2 on vhf and not (by_zone 14,15,16 or call_zone 14,15,16)
+
+ rej/spot 1 on hf
+ rej/spot 2 on vhf and not (by_zone 14,15,16 or call_zone 14,15,16)
You can use the tag 'all' to reject everything eg:
+
rej/spot 3 all
+
but this probably for advanced users...
the default for nodes and users eg:-
- reject/spot db0sue-7 1 by_zone 14,15,16
- reject/spot node_default all
- set/hops node_default 10
- reject/spot user_default by G,M,2
+ reject/spot db0sue-7 1 by_zone 14,15,16
+ reject/spot node_default all
+ set/hops node_default 10
+
+ reject/spot user_default by G,M,2
+
can filter on the following fields:-
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- channel <prefixes>
+
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
+
r
\bre
\bej
\bje
\bec
\bct
\bt/
\b/w
\bwc
\bcy
\by <
\b<c
\bca
\bal
\bll
\bl>
\b> [
\b[i
\bin
\bnp
\bpu
\but
\bt]
\b] [
\b[0
\b0-
\b-9
\b9]
\b] <
\b<p
\bpa
\bat
\btt
\bte
\ber
\brn
\bn>
\b> WCY reject filter sysop
version
-
-
This version allows a sysop to set a filter for a callsign as well as
the default for nodes and users eg:-
can filter on the following fields:-
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- channel <prefixes>
+
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
+
for example
- reject/wwv by_zone 14,15,16
+
+ reject/wwv by_zone 14,15,16
+
the default for nodes and users eg:-
- reject/wwv db0sue-7 1 by_zone 4
- reject/wwv node_default all
- reject/wwv user_default by W
+ reject/wwv db0sue-7 1 by_zone 4
+ reject/wwv node_default all
+
+ reject/wwv user_default by W
+
+
+
r\bre\bep\bpl\bly\by N\bNO\bOP\bPr\bri\biv\bva\bat\bte\be <\b<m\bms\bsg\bgn\bno\bo>\b> Reply as a Bulletin to the specified message
r\bre\bep\bpl\bly\by R\bRR\bR <\b<m\bms\bsg\bgn\bno\bo>\b> Reply to the specified message with read receipt
+
You can reply to a message and the subject will automatically have
"Re:" inserted in front of it, if it isn't already present.
You can have multiple qualifiers so that you can have for example:-
- SEND RR COPY 123 PRIVATE G1TLH G0RDI
+
+ SEND RR COPY 123 PRIVATE G1TLH G0RDI
+
Allow announce messages to arrive at your terminal.
-
1\b11\b1.\b.6\b65\b5.\b. s\bse\bet\bt/\b/a\bar\brc\bcl\blu\bus\bst\bte\ber\br (\b(5\b5)\b)
s\bse\bet\bt/\b/a\bar\brc\bcl\blu\bus\bst\bte\ber\br <\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> [\b[<\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> .\b..\b..\b.]\b] Make the node_call an AR-
Set the node_call as an AR-Cluster type node
+ 1\b11\b1.\b.6\b66\b6.\b. s\bse\bet\bt/\b/b\bba\bad\bdd\bdx\bx (\b(8\b8)\b)
+
+ s\bse\bet\bt/\b/b\bba\bad\bdd\bdx\bx <\b<c\bca\bal\bll\bl>\b> Stop words we do not wish to see in the callsign
+ field of a dx spot being propagated
+
+
+ Setting a word as 'baddx' will prevent spots with that word in the
+ callsign field of a DX spot from going any further. They will not be
+ displayed and they will not be sent onto other nodes.
- 1\b11\b1.\b.6\b66\b6.\b. s\bse\bet\bt/\b/b\bba\bad\bdn\bno\bod\bde\be (\b(6\b6)\b)
+ The word must be wriiten in full, no wild cards are allowed eg:-
+
+
+
+ set/baddx FORSALE VIDEO FR0G
+
+
+
+
+ To allow a word again, use the following command ...
+
+
+
+ unset/baddx VIDEO
+
+
+
+
+
+ 1\b11\b1.\b.6\b67\b7.\b. s\bse\bet\bt/\b/b\bba\bad\bdn\bno\bod\bde\be (\b(6\b6)\b)
s\bse\bet\bt/\b/b\bba\bad\bdn\bno\bod\bde\be <\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> Stop spots from this node_call being
propagated
The call can be a full or partial call (or a prefix), eg:-
- set/badnode K1TTT
+
+ set/badnode K1TTT
+
will stop anything from K1TTT (including any SSID's)
- unset/badnode K1TTT
+
+ unset/badnode K1TTT
+
FILTERing.
- 1\b11\b1.\b.6\b67\b7.\b. s\bse\bet\bt/\b/b\bbe\bee\bep\bp (\b(0\b0)\b)
+ 1\b11\b1.\b.6\b68\b8.\b. s\bse\bet\bt/\b/b\bba\bad\bds\bsp\bpo\bot\btt\bte\ber\br (\b(8\b8)\b)
+
+ s\bse\bet\bt/\b/b\bba\bad\bds\bsp\bpo\bot\btt\bte\ber\br <\b<c\bca\bal\bll\bl>\b> Stop spots from this callsign being propagated
+
+
+ Setting a callsign as a 'badspotter' will prevent spots from this
+ callsign going any further. They will not be displayed and they will
+ not be sent onto other nodes.
+
+ The call must be written in full, no wild cards are allowed eg:-
+
+
+
+ set/badspotter VE2STN
+
+
+
+
+ will stop anything from VE2STN. If you want SSIDs as well then you
+ must enter them specifically.
+
+
+
+ unset/badspotter VE2STN
+
+
+
+
+ will allow spots from him again.
+
+ Use with extreme care. This command may well be superceded by
+ FILTERing.
+
+
+ 1\b11\b1.\b.6\b69\b9.\b. s\bse\bet\bt/\b/b\bbe\bee\bep\bp (\b(0\b0)\b)
s\bse\bet\bt/\b/b\bbe\bee\bep\bp Add beeps to terminal messages
Add a beep to DX and other terminal messages.
- 1\b11\b1.\b.6\b68\b8.\b. s\bse\bet\bt/\b/c\bcl\blx\bx (\b(5\b5)\b)
+ 1\b11\b1.\b.7\b70\b0.\b. s\bse\bet\bt/\b/c\bcl\blx\bx (\b(5\b5)\b)
s\bse\bet\bt/\b/c\bcl\blx\bx <\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> [\b[<\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> .\b..\b..\b.]\b] Make the node_call a CLX type
node
Set the node_call as a CLX type node
- 1\b11\b1.\b.6\b69\b9.\b. s\bse\bet\bt/\b/d\bde\beb\bbu\bug\bg (\b(9\b9)\b)
+ 1\b11\b1.\b.7\b71\b1.\b. s\bse\bet\bt/\b/d\bde\beb\bbu\bug\bg (\b(9\b9)\b)
s\bse\bet\bt/\b/d\bde\beb\bbu\bug\bg <\b<n\bna\bam\bme\be>\b> Add a debug level to the debug set
You can remove this level with unset/debug <name>
- 1\b11\b1.\b.7\b70\b0.\b. s\bse\bet\bt/\b/d\bdx\bx (\b(0\b0)\b)
+
+ 1\b11\b1.\b.7\b72\b2.\b. s\bse\bet\bt/\b/d\bdx\bx (\b(0\b0)\b)
s\bse\bet\bt/\b/d\bdx\bxAllow DX messages to arrive at your terminal
You can stop DX messages with the _\bu_\bn_\bs_\be_\bt_\b/_\bd_\bx command
-
-
-
- 1\b11\b1.\b.7\b71\b1.\b. s\bse\bet\bt/\b/d\bdx\bxg\bgr\bri\bid\bd (\b(0\b0)\b)
+ 1\b11\b1.\b.7\b73\b3.\b. s\bse\bet\bt/\b/d\bdx\bxg\bgr\bri\bid\bd (\b(0\b0)\b)
s\bse\bet\bt/\b/d\bdx\bxg\bgr\bri\bid\bdAllow grid squares on the end of DX messages
to remove the grid squares.
- 1\b11\b1.\b.7\b72\b2.\b. s\bse\bet\bt/\b/d\bdx\bxn\bne\bet\bt (\b(5\b5)\b)
+ 1\b11\b1.\b.7\b74\b4.\b. s\bse\bet\bt/\b/d\bdx\bxn\bne\bet\bt (\b(5\b5)\b)
s\bse\bet\bt/\b/d\bdx\bxn\bne\bet\bt <\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> [\b[<\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> .\b..\b..\b.]\b] Make the node_call a DXNet
type node
Set the node_call as a DXNet type node
- 1\b11\b1.\b.7\b73\b3.\b. s\bse\bet\bt/\b/e\bec\bch\bho\bo (\b(0\b0)\b)
+ 1\b11\b1.\b.7\b75\b5.\b. s\bse\bet\bt/\b/e\bec\bch\bho\bo (\b(0\b0)\b)
s\bse\bet\bt/\b/e\bec\bch\bho\bo Make the cluster echo your input
YOU DO NOT NEED TO USE THIS COMMAND IF YOU ARE CONNECTED VIA AX25.
- 1\b11\b1.\b.7\b74\b4.\b. s\bse\bet\bt/\b/h\bhe\ber\bre\be (\b(0\b0)\b)
+ 1\b11\b1.\b.7\b76\b6.\b. s\bse\bet\bt/\b/h\bhe\ber\bre\be (\b(0\b0)\b)
s\bse\bet\bt/\b/h\bhe\ber\bre\be Set the here flag
brackets around your callsign to indicate you are not available.
- 1\b11\b1.\b.7\b75\b5.\b. s\bse\bet\bt/\b/h\bho\bom\bme\ben\bno\bod\bde\be (\b(0\b0)\b)
+ 1\b11\b1.\b.7\b77\b7.\b. s\bse\bet\bt/\b/h\bho\bom\bme\ben\bno\bod\bde\be (\b(0\b0)\b)
s\bse\bet\bt/\b/h\bho\bom\bme\ben\bno\bod\bde\be <\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> Set your home cluster
connected. eg:-
+
SET/HOMENODE gb7djk
- 1\b11\b1.\b.7\b76\b6.\b. s\bse\bet\bt/\b/h\bho\bop\bps\bs (\b(8\b8)\b)
+
+ 1\b11\b1.\b.7\b78\b8.\b. s\bse\bet\bt/\b/h\bho\bop\bps\bs (\b(8\b8)\b)
s\bse\bet\bt/\b/h\bho\bop\bps\bs <\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> a\ban\bnn\bn|\b|s\bsp\bpo\bot\bts\bs|\b|w\bww\bwv\bv|\b|w\bwc\bcy\by <\b<n\bn>\b> Set hop count
+
Set the hop count for a particular type of broadcast for a node.
This command allows you to set up special hop counts for a node for
currently: announce, spots, wwv and wcy broadcasts.
- eg:
- set/hops gb7djk ann 10
- set/hops gb7mbc spots 20
+
+ eg:
+ set/hops gb7djk ann 10
+ set/hops gb7mbc spots 20
+
creates a filter and works in conjunction with the filter system.
- 1\b11\b1.\b.7\b77\b7.\b. s\bse\bet\bt/\b/i\bis\bso\bol\bla\bat\bte\be (\b(9\b9)\b)
+ 1\b11\b1.\b.7\b79\b9.\b. s\bse\bet\bt/\b/i\bis\bso\bol\bla\bat\bte\be (\b(9\b9)\b)
s\bse\bet\bt/\b/i\bis\bso\bol\bla\bat\bte\be <\b<n\bno\bod\bde\be c\bca\bal\bll\bl>\b> Isolate a node from the rest of the network
You can remove the isolation with the command unset/isolate.
- 1\b11\b1.\b.7\b78\b8.\b. s\bse\bet\bt/\b/l\bla\ban\bng\bgu\bua\bag\bge\be (\b(0\b0)\b)
+ 1\b11\b1.\b.8\b80\b0.\b. s\bse\bet\bt/\b/l\bla\ban\bng\bgu\bua\bag\bge\be (\b(0\b0)\b)
s\bse\bet\bt/\b/l\bla\ban\bng\bgu\bua\bag\bge\be <\b<l\bla\ban\bng\bgu\bua\bag\bge\be>\b> Set the language you wish to use
Currently the languages available are _\be_\bn (English) and _\bn_\bl (Dutch).
- 1\b11\b1.\b.7\b79\b9.\b. s\bse\bet\bt/\b/l\blo\boc\bca\bat\bti\bio\bon\bn (\b(0\b0)\b)
+ 1\b11\b1.\b.8\b81\b1.\b. s\bse\bet\bt/\b/l\blo\boc\bca\bat\bti\bio\bon\bn (\b(0\b0)\b)
s\bse\bet\bt/\b/l\blo\boc\bca\bat\bti\bio\bon\bn <\b<l\bla\bat\bt a\ban\bnd\bd l\blo\bon\bng\bg>\b> Set your latitude and longitude
the _\bs_\be_\bt_\b/_\bq_\br_\ba command which will do the conversion for you.
+
set/location 54 04 N 2 02 E
- 1\b11\b1.\b.8\b80\b0.\b. s\bse\bet\bt/\b/s\bsy\bys\bs_\b_l\blo\boc\bca\bat\bti\bio\bon\bn (\b(9\b9)\b)
+
+ 1\b11\b1.\b.8\b82\b2.\b. s\bse\bet\bt/\b/s\bsy\bys\bs_\b_l\blo\boc\bca\bat\bti\bio\bon\bn (\b(9\b9)\b)
s\bse\bet\bt/\b/s\bsy\bys\bs_\b_l\blo\boc\bca\bat\bti\bio\bon\bn <\b<l\bla\bat\bt &\b& l\blo\bon\bng\bg>\b> Set your cluster latitude and longitude
example:-
- SET/LOCATION 52 22 N 0 57 E
+
+ SET/LOCATION 52 22 N 0 57 E
- 1\b11\b1.\b.8\b81\b1.\b. s\bse\bet\bt/\b/l\blo\bog\bgi\bin\bni\bin\bnf\bfo\bo (\b(0\b0)\b)
+
+ 1\b11\b1.\b.8\b83\b3.\b. s\bse\bet\bt/\b/l\blo\bog\bgi\bin\bni\bin\bnf\bfo\bo (\b(0\b0)\b)
s\bse\bet\bt/\b/l\blo\bog\bgi\bin\bni\bin\bnf\bfo\bo Show logins and logouts of nodes and users
- 1\b11\b1.\b.8\b82\b2.\b. s\bse\bet\bt/\b/l\blo\boc\bck\bko\bou\but\bt (\b(9\b9)\b)
+ 1\b11\b1.\b.8\b84\b4.\b. s\bse\bet\bt/\b/l\blo\boc\bck\bko\bou\but\bt (\b(9\b9)\b)
s\bse\bet\bt/\b/l\blo\boc\bck\bko\bou\but\bt <\b<c\bca\bal\bll\bl>\b> Stop a callsign connecting to the cluster
allow the user to connect again, use the _\bu_\bn_\bs_\be_\bt_\b/_\bl_\bo_\bc_\bk_\bo_\bu_\bt command.
- 1\b11\b1.\b.8\b83\b3.\b. s\bse\bet\bt/\b/n\bna\bam\bme\be (\b(0\b0)\b)
+ 1\b11\b1.\b.8\b85\b5.\b. s\bse\bet\bt/\b/n\bna\bam\bme\be (\b(0\b0)\b)
s\bse\bet\bt/\b/n\bna\bam\bme\be <\b<y\byo\bou\bur\br_\b_n\bna\bam\bme\be>\b> Set your name
Tell the cluster what your name is, eg:-
- set/name Dirk
+
+ set/name Dirk
- 1\b11\b1.\b.8\b84\b4.\b. s\bse\bet\bt/\b/n\bno\bod\bde\be (\b(9\b9)\b)
+
+ 1\b11\b1.\b.8\b86\b6.\b. s\bse\bet\bt/\b/n\bno\bod\bde\be (\b(9\b9)\b)
s\bse\bet\bt/\b/n\bno\bod\bde\be <\b<c\bca\bal\bll\bl>\b> [\b[<\b<c\bca\bal\bll\bl>\b> .\b..\b..\b.]\b] Make the callsign an AK1A cluster
Tell the system that the call(s) are to be treated as AK1A cluster and
fed PC Protocol rather normal user commands.
-
From version 1.41 you can also set the following types of cluster
- set/spider
- set/dxnet
- set/clx
- set/arcluster
+
+ set/spider
+ set/dxnet
+ set/clx
+ set/arcluster
+
To see what your nodes are set to, use the _\bs_\bh_\bo_\bw_\b/_\bn_\bo_\bd_\be_\bs command.
- 1\b11\b1.\b.8\b85\b5.\b. s\bse\bet\bt/\b/o\bob\bbs\bsc\bco\bou\bun\bnt\bt (\b(9\b9)\b)
+ 1\b11\b1.\b.8\b87\b7.\b. s\bse\bet\bt/\b/o\bob\bbs\bsc\bco\bou\bun\bnt\bt (\b(9\b9)\b)
s\bse\bet\bt/\b/o\bob\bbs\bsc\bco\bou\bun\bnt\bt <\b<c\bco\bou\bun\bnt\bt>\b> <\b<n\bno\bod\bde\be c\bca\bal\bll\bl>\b> Set the 'pump-up' obsolescence
counter
+
From version 1.35 onwards neighbouring nodes are pinged at regular
intervals (see SET/PINGINTERVAL), usually 300 seconds or 5 minutes.
There is a 'pump-up' counter which is decremented on every outgoing
minutes, it is disconnected.
- 1\b11\b1.\b.8\b86\b6.\b. s\bse\bet\bt/\b/p\bpa\bag\bge\be (\b(0\b0)\b)
+ 1\b11\b1.\b.8\b88\b8.\b. s\bse\bet\bt/\b/p\bpa\bag\bge\be (\b(0\b0)\b)
s\bse\bet\bt/\b/p\bpa\bag\bge\be <\b<n\bn>\b> Set the number of lines per page
Setting it explicitly to 0 will disable paging.
- SET/PAGE 30
- SET/PAGE 0
+
+ SET/PAGE 30
+ SET/PAGE 0
+
- 1\b11\b1.\b.8\b87\b7.\b. s\bse\bet\bt/\b/p\bpa\bas\bss\bsw\bwo\bor\brd\bd (\b(9\b9)\b)
+ 1\b11\b1.\b.8\b89\b9.\b. s\bse\bet\bt/\b/p\bpa\bas\bss\bsw\bwo\bor\brd\bd (\b(9\b9)\b)
s\bse\bet\bt/\b/p\bpa\bas\bss\bsw\bwo\bor\brd\bd <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> <\b<s\bst\btr\bri\bin\bng\bg>\b> Set a users password
type password.
- 1\b11\b1.\b.8\b88\b8.\b. s\bse\bet\bt/\b/p\bpi\bin\bng\bgi\bin\bnt\bte\ber\brv\bva\bal\bl (\b(9\b9)\b)
+ 1\b11\b1.\b.9\b90\b0.\b. s\bse\bet\bt/\b/p\bpi\bin\bng\bgi\bin\bnt\bte\ber\brv\bva\bal\bl (\b(9\b9)\b)
s\bse\bet\bt/\b/p\bpi\bin\bng\bgi\bin\bnt\bte\ber\brv\bva\bal\bl <\b<t\bti\bim\bme\be>\b> <\b<n\bno\bod\bde\be c\bca\bal\bll\bl>\b> Set the ping time to neighbouring
nodes
(as certain cluster software doesn't always notice), see SET/OBSCOUNT
for more information.
- 1\b11\b1.\b.8\b89\b9.\b. s\bse\bet\bt/\b/p\bpr\bri\biv\bvi\bil\ble\beg\bge\be (\b(9\b9)\b)
+
+ 1\b11\b1.\b.9\b91\b1.\b. s\bse\bet\bt/\b/p\bpr\bri\biv\bvi\bil\ble\beg\bge\be (\b(9\b9)\b)
s\bse\bet\bt/\b/p\bpr\bri\biv\bvi\bil\ble\beg\bge\be <\b<n\bn>\b> <\b<c\bca\bal\bll\bl>\b> [\b[<\b<c\bca\bal\bll\bl>\b> .\b..\b..\b.]\b] Set the privilege level on a
call
connection your privilege will automatically be set to 0.
- 1\b11\b1.\b.9\b90\b0.\b. s\bse\bet\bt/\b/s\bsp\bpi\bid\bde\ber\br (\b(5\b5)\b)
+ 1\b11\b1.\b.9\b92\b2.\b. s\bse\bet\bt/\b/s\bsp\bpi\bid\bde\ber\br (\b(5\b5)\b)
s\bse\bet\bt/\b/s\bsp\bpi\bid\bde\ber\br <\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> [\b[<\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> .\b..\b..\b.]\b] Make the node_call a DXSpider
type node
Set the node_call as a DXSpider type node
- 1\b11\b1.\b.9\b91\b1.\b. s\bse\bet\bt/\b/s\bsy\bys\bs_\b_q\bqr\bra\ba (\b(9\b9)\b)
+ 1\b11\b1.\b.9\b93\b3.\b. s\bse\bet\bt/\b/s\bsy\bys\bs_\b_q\bqr\bra\ba (\b(9\b9)\b)
s\bse\bet\bt/\b/s\bsy\bys\bs_\b_q\bqr\bra\ba <\b<l\blo\boc\bca\bat\bto\bor\br>\b> Set your cluster QRA locator
- 1\b11\b1.\b.9\b92\b2.\b. s\bse\bet\bt/\b/q\bqr\bra\ba (\b(0\b0)\b)
+
+
+ 1\b11\b1.\b.9\b94\b4.\b. s\bse\bet\bt/\b/q\bqr\bra\ba (\b(0\b0)\b)
s\bse\bet\bt/\b/q\bqr\bra\ba <\b<l\blo\boc\bca\bat\bto\bor\br>\b> Set your QRA locator
roughly correctly (assuming your locator is correct ;-). For example:-
- SET/QRA JO02LQ
+
+ SET/QRA JO02LQ
+
- 1\b11\b1.\b.9\b93\b3.\b. s\bse\bet\bt/\b/q\bqt\bth\bh (\b(0\b0)\b)
+ 1\b11\b1.\b.9\b95\b5.\b. s\bse\bet\bt/\b/q\bqt\bth\bh (\b(0\b0)\b)
s\bse\bet\bt/\b/q\bqt\bth\bh <\b<y\byo\bou\bur\br Q\bQT\bTH\bH>\b> Set your QTH
Tell the system where your are. For example:-
- set/qth East Dereham, Norfolk
+ set/qth East Dereham, Norfolk
- 1\b11\b1.\b.9\b94\b4.\b. s\bse\bet\bt/\b/t\bta\bal\blk\bk (\b(0\b0)\b)
+
+
+
+
+ 1\b11\b1.\b.9\b96\b6.\b. s\bse\bet\bt/\b/t\bta\bal\blk\bk (\b(0\b0)\b)
s\bse\bet\bt/\b/t\bta\bal\blk\bk Allow talk messages to be seen at your console
talks with the _\bu_\bn_\bs_\be_\bt_\b/_\bt_\ba_\bl_\bk command.
- 1\b11\b1.\b.9\b95\b5.\b. s\bse\bet\bt/\b/w\bwc\bcy\by (\b(0\b0)\b)
+ 1\b11\b1.\b.9\b97\b7.\b. s\bse\bet\bt/\b/w\bwc\bcy\by (\b(0\b0)\b)
s\bse\bet\bt/\b/w\bwc\bcy\by Allow WCY messages to be seen at your console
WCY messages with the _\bu_\bn_\bs_\be_\bt_\b/_\bw_\bc_\by command.
- 1\b11\b1.\b.9\b96\b6.\b. s\bse\bet\bt/\b/w\bww\bwv\bv (\b(0\b0)\b)
+ 1\b11\b1.\b.9\b98\b8.\b. s\bse\bet\bt/\b/w\bww\bwv\bv (\b(0\b0)\b)
s\bse\bet\bt/\b/w\bww\bwv\bv Allow WWV messages to be seen at your console
WWV messages with the _\bu_\bn_\bs_\be_\bt_\b/_\bw_\bw_\bv command.
- 1\b11\b1.\b.9\b97\b7.\b. s\bse\bet\bt/\b/w\bwx\bx (\b(0\b0)\b)
+ 1\b11\b1.\b.9\b99\b9.\b. s\bse\bet\bt/\b/w\bwx\bx (\b(0\b0)\b)
s\bse\bet\bt/\b/w\bwx\bx Allow WX messages to be seen at your console
Allow WX information to be seen at your console. You can switch off
WX messages with the _\bu_\bn_\bs_\be_\bt_\b/_\bw_\bx command.
+ 1\b11\b1.\b.1\b10\b00\b0.\b. s\bsh\bho\bow\bw/\b/b\bba\bad\bdd\bdx\bx (\b(1\b1)\b)
+
+ s\bsh\bho\bow\bw/\b/b\bba\bad\bdd\bdx\bxShow all the bad dx calls in the system
+
+
+ Display all the bad dx callsigns in the system, see SET/BADDX for more
+ information.
- 1\b11\b1.\b.9\b98\b8.\b. s\bsh\bho\bow\bw/\b/b\bba\bad\bdn\bno\bod\bde\be (\b(6\b6)\b)
+ 1\b11\b1.\b.1\b10\b01\b1.\b. s\bsh\bho\bow\bw/\b/b\bba\bad\bdn\bno\bod\bde\be (\b(6\b6)\b)
s\bsh\bho\bow\bw/\b/b\bba\bad\bdn\bno\bod\bde\be Show all the bad nodes in the system
more information.
- 1\b11\b1.\b.9\b99\b9.\b. s\bsh\bho\bow\bw/\b/d\bda\bat\bte\be (\b(0\b0)\b)
+ 1\b11\b1.\b.1\b10\b02\b2.\b. s\bsh\bho\bow\bw/\b/b\bba\bad\bds\bsp\bpo\bot\btt\bte\ber\br (\b(1\b1)\b)
+
+ s\bsh\bho\bow\bw/\b/b\bba\bad\bds\bsp\bpo\bot\btt\bte\ber\brShow all the bad spotters in the system
+
+
+ Display all the bad spotter's callsigns in the system, see
+ SET/BADSPOTTER for more information.
+
+
+ 1\b11\b1.\b.1\b10\b03\b3.\b. s\bsh\bho\bow\bw/\b/d\bda\bat\bte\be (\b(0\b0)\b)
s
\bsh
\bho
\bow
\bw/
\b/d
\bda
\bat
\bte
\be [
\b[<
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b>|
\b|<
\b<c
\bca
\bal
\bll
\bls
\bsi
\big
\bgn
\bn>
\b>]
\b] Show the local time
including DST) at the prefixes or callsigns that you specify.
- 1\b11\b1.\b.1\b10\b00\b0.\b. s\bsh\bho\bow\bw/\b/d\bdx\bx (\b(0\b0)\b)
+ 1\b11\b1.\b.1\b10\b04\b4.\b. s\bsh\bho\bow\bw/\b/d\bdx\bx (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/d\bdx\bx [\b[o\bop\bpt\bti\bio\bon\bns\bs]\b] interrogate the spot database
If you just type SHOW/DX you will get the last so many spots (sysop
configurable, but usually 10).
+
In addition you can add any number of these options in very nearly any
order to the basic SHOW/DX command, they are:-
+
+
+
+
+
+
+
+
+
+
+
+
on <band> - eg 160m 20m 2m 23cm 6mm
on <region> - eg hf vhf uhf shf (see SHOW/BANDS)
+
e.g.
- SH/DX 9m0
- SH/DX on 20m info iota
- SH/DX 9a on vhf day 30
- SH/DX rf1p qsl
- SH/DX iota
- SH/DX iota eu-064
- SH/DX qra jn86
+
+ SH/DX 9m0
+ SH/DX on 20m info iota
+ SH/DX 9a on vhf day 30
+ SH/DX rf1p qsl
+ SH/DX iota
+ SH/DX iota eu-064
+ SH/DX qra jn86
+
- 1\b11\b1.\b.1\b10\b01\b1.\b. s\bsh\bho\bow\bw/\b/d\bdx\bxc\bcc\bc (\b(0\b0)\b)
+ 1\b11\b1.\b.1\b10\b05\b5.\b. s\bsh\bho\bow\bw/\b/d\bdx\bxc\bcc\bc (\b(0\b0)\b)
s
\bsh
\bho
\bow
\bw/
\b/d
\bdx
\bxc
\bcc
\bc <
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b> Interrogate the spot database by country
+
+
SH/DXCC G
SH/DXCC W on 20m info iota
- 1\b11\b1.\b.1\b10\b02\b2.\b. s\bsh\bho\bow\bw/\b/f\bfi\bil\ble\bes\bs (\b(0\b0)\b)
+
+ 1\b11\b1.\b.1\b10\b06\b6.\b. s\bsh\bho\bow\bw/\b/f\bfi\bil\ble\bes\bs (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/f\bfi\bil\ble\bes\bs [\b[<\b<f\bfi\bil\ble\bea\bar\bre\bea\ba>\b> [\b[<\b<s\bst\btr\bri\bin\bng\bg>\b>]\b]]\b] List the contents of a filearea
type:-
- SH/FILES <filearea>
+
+ SH/FILES <filearea>
+
string to see a selection of files in a filearea eg:-
- SH/FILES bulletins arld*
+
+ SH/FILES bulletins arld*
+
See also TYPE - to see the contents of a file.
- 1\b11\b1.\b.1\b10\b03\b3.\b. s\bsh\bho\bow\bw/\b/f\bfi\bil\blt\bte\ber\br (\b(0\b0)\b)
+ 1\b11\b1.\b.1\b10\b07\b7.\b. s\bsh\bho\bow\bw/\b/f\bfi\bil\blt\bte\ber\br (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/f\bfi\bil\blt\bte\ber\br Show the filters you have set
displays all the filters set - for all the various categories.
- 1\b11\b1.\b.1\b10\b04\b4.\b. s\bsh\bho\bow\bw/\b/f\bfi\bil\blt\bte\ber\br (\b(e\bex\bxt\bte\ben\bnd\bde\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(5\b5)\b)
+ 1\b11\b1.\b.1\b10\b08\b8.\b. s\bsh\bho\bow\bw/\b/f\bfi\bil\blt\bte\ber\br (\b(e\bex\bxt\bte\ben\bnd\bde\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(5\b5)\b)
s\bsh\bho\bow\bw/\b/f\bfi\bil\blt\bte\ber\br <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> Show the filters set by <callsign>
A sysop can look at any filters that have been set.
- 1\b11\b1.\b.1\b10\b05\b5.\b. s\bsh\bho\bow\bw/\b/h\bho\bop\bps\bs (\b(8\b8)\b)
+ 1\b11\b1.\b.1\b10\b09\b9.\b. s\bsh\bho\bow\bw/\b/h\bho\bop\bps\bs (\b(8\b8)\b)
s\bsh\bho\bow\bw/\b/h\bho\bop\bps\bs <\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> [\b[a\ban\bnn\bn|\b|s\bsp\bpo\bot\bts\bs|\b|w\bwc\bcy\by|\b|w\bww\bwv\bv|\b|]\b] Show the hop counts for a
node
which category you want to see. If you leave the category out then all
the categories will be listed.
-
- 1\b11\b1.\b.1\b10\b06\b6.\b. s\bsh\bho\bow\bw/\b/i\bis\bso\bol\bla\bat\bte\be (\b(1\b1)\b)
+ 1\b11\b1.\b.1\b11\b10\b0.\b. s\bsh\bho\bow\bw/\b/i\bis\bso\bol\bla\bat\bte\be (\b(1\b1)\b)
s\bsh\bho\bow\bw/\b/i\bis\bso\bol\bla\bat\bte\be Show a list of isolated nodes
+
Show which nodes are currently set to be isolated.
- 1\b11\b1.\b.1\b10\b07\b7.\b. s\bsh\bho\bow\bw/\b/l\blo\boc\bck\bko\bou\but\bt (\b(9\b9)\b)
+ 1\b11\b1.\b.1\b11\b11\b1.\b. s\bsh\bho\bow\bw/\b/l\blo\boc\bck\bko\bou\but\bt (\b(9\b9)\b)
s\bsh\bho\bow\bw/\b/l\blo\boc\bck\bko\bou\but\bt Show a list of excluded callsigns
cluster locally with the _\bs_\be_\bt_\b/_\bl_\bo_\bc_\bk_\bo_\bu_\bt command
- 1\b11\b1.\b.1\b10\b08\b8.\b. s\bsh\bho\bow\bw/\b/m\bmo\boo\bon\bn (\b(0\b0)\b)
+ 1\b11\b1.\b.1\b11\b12\b2.\b. s\bsh\bho\bow\bw/\b/m\bmo\boo\bon\bn (\b(0\b0)\b)
s
\bsh
\bho
\bow
\bw/
\b/m
\bmo
\boo
\bon
\bn [
\b[<
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b>|
\b|<
\b<c
\bca
\bal
\bll
\bls
\bsi
\big
\bgn
\bn>
\b>]
\b] Show moon rise and set times
For example:-
- SH/MOON
- SH/MOON G1TLH W5UN
+
+ SH/MOON
+ SH/MOON G1TLH W5UN
- 1\b11\b1.\b.1\b10\b09\b9.\b. s\bsh\bho\bow\bw/\b/m\bmu\buf\bf (\b(0\b0)\b)
+
+ 1\b11\b1.\b.1\b11\b13\b3.\b. s\bsh\bho\bow\bw/\b/m\bmu\buf\bf (\b(0\b0)\b)
s
\bsh
\bho
\bow
\bw/
\b/m
\bmu
\buf
\bf <
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b> [
\b[<
\b<h
\bho
\bou
\bur
\brs
\bs>
\b>]
\b][
\b[l
\blo
\bon
\bng
\bg]
\b] Show the likely propagation to
<prefix>
than the programs used by major shortwave broadcasting organizations,
such as the Voice of America.
-
The command will display some header information detailing its
assumptions, together with the locations, latitude and longitudes and
bearings. It will then show UTC (UT), local time at the other end
of hours required after the prefix. For example:-
- SH/MUF W
+
+ SH/MUF W
+
produces:
- RxSens: -123 dBM SFI: 159 R: 193 Month: 10 Day: 21
- Power : 20 dBW Distance: 6283 km Delay: 22.4 ms
- Location Lat / Long Azim
- East Dereham, Norfolk 52 41 N 0 57 E 47
- United-States-W 43 0 N 87 54 W 299
- UT LT MUF Zen 1.8 3.5 7.0 10.1 14.0 18.1 21.0 24.9 28.0 50.0
- 18 23 11.5 -35 mS0+ mS2 S3
- 19 0 11.2 -41 mS0+ mS2 S3
+
+ RxSens: -123 dBM SFI: 159 R: 193 Month: 10 Day: 21
+ Power : 20 dBW Distance: 6283 km Delay: 22.4 ms
+ Location Lat / Long Azim
+ East Dereham, Norfolk 52 41 N 0 57 E 47
+ United-States-W 43 0 N 87 54 W 299
+ UT LT MUF Zen 1.8 3.5 7.0 10.1 14.0 18.1 21.0 24.9 28.0 50.0
+ 18 23 11.5 -35 mS0+ mS2 S3
+ 19 0 11.2 -41 mS0+ mS2 S3
+
inputing:-
- SH/MUF W 24
+
+ SH/MUF W 24
+
propagation data.
+
+
+
SH/MUF W L 24
SH/MUF W 24 Long
+
Gives you an estimate of the long path propagation characterics. It
should be noted that the figures will probably not be very useful, nor
terrible accurate, but it is included for completeness.
- 1\b11\b1.\b.1\b11\b10\b0.\b. s\bsh\bho\bow\bw/\b/n\bno\bod\bde\be (\b(1\b1)\b)
+ 1\b11\b1.\b.1\b11\b14\b4.\b. s\bsh\bho\bow\bw/\b/n\bno\bod\bde\be (\b(1\b1)\b)
s\bsh\bho\bow\bw/\b/n\bno\bod\bde\be [\b[<\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> .\b..\b..\b.]\b] Show the type and version number of nodes
the non-user callsigns known to the system will be displayed.
- 1\b11\b1.\b.1\b11\b11\b1.\b. s\bsh\bho\bow\bw/\b/p\bpr\bre\bef\bfi\bix\bx (\b(0\b0)\b)
+ 1\b11\b1.\b.1\b11\b15\b5.\b. s\bsh\bho\bow\bw/\b/p\bpr\bre\bef\bfi\bix\bx (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/p\bpr\bre\bef\bfi\bix\bx <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> Interrogate the prefix database
- 1\b11\b1.\b.1\b11\b12\b2.\b. s\bsh\bho\bow\bw/\b/p\bpr\bro\bog\bgr\bra\bam\bm (\b(5\b5)\b)
+ 1\b11\b1.\b.1\b11\b16\b6.\b. s\bsh\bho\bow\bw/\b/p\bpr\bro\bog\bgr\bra\bam\bm (\b(5\b5)\b)
s\bsh\bho\bow\bw/\b/p\bpr\bro\bog\bgr\bra\bam\bm Show the locations of all the included program modules
from.
- 1\b11\b1.\b.1\b11\b13\b3.\b. s\bsh\bho\bow\bw/\b/q\bqr\bra\ba (\b(0\b0)\b)
+ 1\b11\b1.\b.1\b11\b17\b7.\b. s\bsh\bho\bow\bw/\b/q\bqr\bra\ba (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/q\bqr\bra\ba <\b<l\blo\boc\bca\bat\bto\bor\br>\b> [\b[<\b<l\blo\boc\bca\bat\bto\bor\br>\b>]\b] Show the distance between locators
s\bsh\bho\bow\bw/\b/q\bqr\bra\ba <\b<l\bla\bat\bt>\b> <\b<l\blo\bon\bng\bg>\b> Convert latitude and longitude to a locator
to the locator. For example:-
- SH/QRA IO92QL
- SH/QRA JN06 IN73
+
+ SH/QRA IO92QL
+ SH/QRA JN06 IN73
+
for example:-
- SH/QRA 52 41 N 0 58 E
+ SH/QRA 52 41 N 0 58 E
- 1\b11\b1.\b.1\b11\b14\b4.\b. s\bsh\bho\bow\bw/\b/q\bqr\brz\bz (\b(0\b0)\b)
+
+
+ 1\b11\b1.\b.1\b11\b18\b8.\b. s\bsh\bho\bow\bw/\b/q\bqr\brz\bz (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/q\bqr\brz\bz <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> Show any callbook details on a callsign
provided for users of this software by http://www.qrz.com
- 1\b11\b1.\b.1\b11\b15\b5.\b. s\bsh\bho\bow\bw/\b/s\bsa\bat\bte\bel\bll\bli\bit\bte\be (\b(0\b0)\b)
+ 1\b11\b1.\b.1\b11\b19\b9.\b. s\bsh\bho\bow\bw/\b/r\bro\bou\but\bte\be (\b(0\b0)\b)
+
+ s\bsh\bho\bow\bw/\b/r\bro\bou\but\bte\be <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> Show the route to <callsign>
+
+
+ This command allows you to see to which node the callsigns specified
+ are connected. It is a sort of inverse sh/config.
+
+
+
+ sh/route n2tly
+
+
+
+
+
+ 1\b11\b1.\b.1\b12\b20\b0.\b. s\bsh\bho\bow\bw/\b/s\bsa\bat\bte\bel\bll\bli\bit\bte\be (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/s\bsa\bat\bte\bel\bll\bli\bit\bte\be <\b<n\bna\bam\bme\be>\b> [\b[<\b<h\bho\bou\bur\brs\bs>\b> <\b<i\bin\bnt\bte\ber\brv\bva\bal\bl>\b>]\b] Show satellite tracking
data
So for example:-
- SH/SAT AO-10
- SH/SAT FENGYUN1 12 2
+ SH/SAT AO-10
+ SH/SAT FENGYUN1 12 2
- 1\b11\b1.\b.1\b11\b16\b6.\b. s\bsh\bho\bow\bw/\b/s\bsu\bun\bn (\b(0\b0)\b)
+
+ 1\b11\b1.\b.1\b12\b21\b1.\b. s\bsh\bho\bow\bw/\b/s\bsu\bun\bn (\b(0\b0)\b)
s
\bsh
\bho
\bow
\bw/
\b/s
\bsu
\bun
\bn [
\b[<
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b>|
\b|<
\b<c
\bca
\bal
\bll
\bls
\bsi
\big
\bgn
\bn>
\b>]
\b] Show sun rise and set times
For example:-
- SH/SUN
- SH/SUN G1TLH K9CW ZS
+
+ SH/SUN
+ SH/SUN G1TLH K9CW ZS
+
- 1\b11\b1.\b.1\b11\b17\b7.\b. s\bsh\bho\bow\bw/\b/t\bti\bim\bme\be (\b(0\b0)\b)
+ 1\b11\b1.\b.1\b12\b22\b2.\b. s\bsh\bho\bow\bw/\b/t\bti\bim\bme\be (\b(0\b0)\b)
s
\bsh
\bho
\bow
\bw/
\b/t
\bti
\bim
\bme
\be [
\b[<
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b>|
\b|<
\b<c
\bca
\bal
\bll
\bls
\bsi
\big
\bgn
\bn>
\b>]
\b] Show the local time
including DST) at the prefixes or callsigns that you specify.
- 1\b11\b1.\b.1\b11\b18\b8.\b. s\bsh\bho\bow\bw/\b/w\bwc\bcy\by (\b(0\b0)\b)
+ 1\b11\b1.\b.1\b12\b23\b3.\b. s\bsh\bho\bow\bw/\b/w\bwc\bcy\by (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/w\bwc\bcy\by Show the last 10 WCY broadcasts
s\bsh\bho\bow\bw/\b/w\bwc\bcy\by <\b<n\bn>\b> Show the last <n> WCY broadcasts
system
- 1\b11\b1.\b.1\b11\b19\b9.\b. s\bsh\bho\bow\bw/\b/w\bww\bwv\bv (\b(0\b0)\b)
+ 1\b11\b1.\b.1\b12\b24\b4.\b. s\bsh\bho\bow\bw/\b/w\bww\bwv\bv (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/w\bww\bwv\bv Show the last 10 WWV broadcasts
s\bsh\bho\bow\bw/\b/w\bww\bwv\bv <\b<n\bn>\b> Show the last <n> WWV broadcasts
- 1\b11\b1.\b.1\b12\b20\b0.\b. s\bsh\bhu\but\btd\bdo\bow\bwn\bn (\b(5\b5)\b)
+ 1\b11\b1.\b.1\b12\b25\b5.\b. s\bsh\bhu\but\btd\bdo\bow\bwn\bn (\b(5\b5)\b)
s\bsh\bhu\but\btd\bdo\bow\bwn\bn Shutdown the cluster
set to respawn in /etc/inittab it will of course restart.
- 1\b11\b1.\b.1\b12\b21\b1.\b. s\bsp\bpo\boo\bof\bf (\b(9\b9)\b)
+ 1\b11\b1.\b.1\b12\b26\b6.\b. s\bsp\bpo\boo\bof\bf (\b(9\b9)\b)
s\bsp\bpo\boo\bof\bf <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> <\b<c\bco\bom\bmm\bma\ban\bnd\bd>\b> Run commands as another user
like home_node for example.
- 1\b11\b1.\b.1\b12\b22\b2.\b. s\bst\bta\bat\bt/\b/d\bdb\bb (\b(5\b5)\b)
+ 1\b11\b1.\b.1\b12\b27\b7.\b. s\bst\bta\bat\bt/\b/d\bdb\bb (\b(5\b5)\b)
s\bst\bta\bat\bt/\b/d\bdb\bb <\b<d\bdb\bbn\bna\bam\bme\be>\b> Show the status of a database
other than a sysop.
- 1\b11\b1.\b.1\b12\b23\b3.\b. s\bst\bta\bat\bt/\b/c\bch\bha\ban\bnn\bne\bel\bl (\b(5\b5)\b)
+ 1\b11\b1.\b.1\b12\b28\b8.\b. s\bst\bta\bat\bt/\b/c\bch\bha\ban\bnn\bne\bel\bl (\b(5\b5)\b)
s\bst\bta\bat\bt/\b/c\bch\bha\ban\bnn\bne\bel\bl <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> Show the status of a channel on the cluster
Show the internal status of the channel object either for the channel
that you are on or else for the callsign that you asked for.
+
Only the fields that are defined (in perl term) will be displayed.
- 1\b11\b1.\b.1\b12\b24\b4.\b. s\bst\bta\bat\bt/\b/m\bms\bsg\bg (\b(5\b5)\b)
+ 1\b11\b1.\b.1\b12\b29\b9.\b. s\bst\bta\bat\bt/\b/m\bms\bsg\bg (\b(5\b5)\b)
s\bst\bta\bat\bt/\b/m\bms\bsg\bg <\b<m\bms\bsg\bgn\bno\bo>\b> Show the status of a message
etc etc.
- 1\b11\b1.\b.1\b12\b25\b5.\b. s\bst\bta\bat\bt/\b/u\bus\bse\ber\br (\b(5\b5)\b)
+ 1\b11\b1.\b.1\b13\b30\b0.\b. s\bst\bta\bat\bt/\b/u\bus\bse\ber\br (\b(5\b5)\b)
s\bst\bta\bat\bt/\b/u\bus\bse\ber\br <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> Show the full status of a user
Only the fields that are defined (in perl term) will be displayed.
- 1\b11\b1.\b.1\b12\b26\b6.\b. s\bsy\bys\bso\bop\bp (\b(0\b0)\b)
+
+
+ 1\b11\b1.\b.1\b13\b31\b1.\b. s\bsy\bys\bso\bop\bp (\b(0\b0)\b)
s\bsy\bys\bso\bop\bp Regain your privileges if you login remotely
these values are for explanation :-):
- password = 012345678901234567890123456789
- > sysop
- 22 10 15 17 3
+
+ password = 012345678901234567890123456789
+ > sysop
+ 22 10 15 17 3
+
you type:-
- aa2bbbb0ccc5ddd7xxx3n
- or 2 0 5 7 3
- or 20573
+
+ aa2bbbb0ccc5ddd7xxx3n
+ or 2 0 5 7 3
+ or 20573
+
case sensitive.
- 1\b11\b1.\b.1\b12\b27\b7.\b. t\bta\bal\blk\bk (\b(0\b0)\b)
+ 1\b11\b1.\b.1\b13\b32\b2.\b. t\bta\bal\blk\bk (\b(0\b0)\b)
t\bta\bal\blk\bk <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> Enter talk mode with <callsign>
t\bta\bal\blk\bk <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> <\b<t\bte\bex\bxt\bt>\b> Send a text message to <callsign>
normal command with a '/' character, eg:-
- /DX 14001 G1TLH What's a B class licensee doing on 20m CW?
- /HELP talk
+
+ /DX 14001 G1TLH What's a B class licensee doing on 20m CW?
+ /HELP talk
+
To leave talk mode type:
- /EX
+
+ /EX
+
- 1\b11\b1.\b.1\b12\b28\b8.\b. t\bty\byp\bpe\be (\b(0\b0)\b)
+ 1\b11\b1.\b.1\b13\b33\b3.\b. t\bty\byp\bpe\be (\b(0\b0)\b)
t\bty\byp\bpe\be <\b<f\bfi\bil\ble\bea\bar\bre\bea\ba>\b>/\b/<\b<n\bna\bam\bme\be>\b> Look at a file in one of the fileareas
enter:-
- TYPE bulletins/arld051
+
+ TYPE bulletins/arld051
+
content.
- 1\b11\b1.\b.1\b12\b29\b9.\b. w\bwh\bho\bo (\b(0\b0)\b)
+ 1\b11\b1.\b.1\b13\b34\b4.\b. w\bwh\bho\bo (\b(0\b0)\b)
w\bwh\bho\bo Show who is physically connected locally
what sort of connection they have
- 1\b11\b1.\b.1\b13\b30\b0.\b. w\bwx\bx (\b(0\b0)\b)
+ 1\b11\b1.\b.1\b13\b35\b5.\b. w\bwx\bx (\b(0\b0)\b)
w\bwx\bx <\b<t\bte\bex\bxt\bt>\b> Send a weather message to local users
w\bwx\bx f\bfu\bul\bll\bl <\b<t\bte\bex\bxt\bt>\b> Send a weather message to all cluster users
extreme that may indicate enhanced conditions
- 1\b11\b1.\b.1\b13\b31\b1.\b. w\bwx\bx (\b(e\ben\bnh\bha\ban\bnc\bce\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(5\b5)\b)
+ 1\b11\b1.\b.1\b13\b36\b6.\b. w\bwx\bx (\b(e\ben\bnh\bha\ban\bnc\bce\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(5\b5)\b)
w\bwx\bx s\bsy\bys\bso\bop\bp <\b<t\bte\bex\bxt\bt>\b> Send a weather message to other clusters only
+
+
+
+
+
+
+
+
+
+
+
+
+
+
projects / spider.git / blobdiff