<title>The DXSpider Installation and Administration Manual
<author>Ian Maude, G0VGS, (ianmaude@btinternet.com)
-<date>Version 1.31 January 2001
+<date>Version 1.33 (Revision 2) February 2001
<abstract>
A reference for SysOps of the DXSpider DXCluster program.
</abstract>
DX:3:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl" sysop >/dev/tty7
</verb></tscreen>
+<P>
+This line works fine for RedHat and SuSE distributions. The line required for
+Slackware distributions is slightly different. My thanks to Aurelio, PA3EZL for
+this information.
+
+<tscreen><verb>
+DX:23:respawn:/bin/su - sysop -c "/usr/bin/perl -w /spider/perl/cluster.pl" >/dev/tty7
+</verb></tscreen>
+
<P>
This will automatically start DXSpider on tty7 (ALT-F7) on bootup and restart
it should it crash for any reason.
Make sure you only send mail to the clusters that want it by using the
Forward.pl file very carefully.
+<sect>Databases
+
+<P>
+Spider allows the creation of local or remote databases. It supports
+chained databases, allowing several different databases to be scanned
+with one simple command. Importing of databases is limited at present
+to the standard AK1A databases such as OBLAST and the DB0SDX QSL
+database but will expand with time.
+
+<sect1>Creating databases
+
+<P>
+Creating a database could not be more simple. All the commands are
+sent from the cluster prompt as the <em>sysop</em> user.
+
+To create a database you use the command <em>dbcreate</em>. It can
+be used in 3 different ways like so ..
+
+<tscreen><verb>
+dbcreate <name>
+</verb></tscreen>
+
+To simply create a database locally, you just tell the command the
+name of the database. This does not create the actual database, it
+simply defines it to say that it exists.
+
+<tscreen><verb>
+dbcreate <name> chain <name> [<name>...]
+</verb></tscreen>
+
+This creates a chained database entry. The first database will be
+scanned, then the second, the third etc...
+
+<tscreen><verb>
+dbcreate <name> remote <name>
+</verb></tscreen>
+
+This creates a remote entry. the first name field is the database
+name at the remote node, then the remote switch, then the actual
+node_call of the remote node, for example...
+
+<tscreen><verb>
+dbcreate buckmaster remote gb7dxc
+</verb></tscreen>
+
+Remote databases cannot be chained, however, the last database in a
+chain can be a remote database.
+
+<sect1>Importing databases
+
+<P>
+The only databases that Spider can currently import are the standard
+AK1A databases such as OBLAST or the DB0SDX qsl and address database.
+This will be added to with time.
+
+To import such a database, first put the file somewhere useful like /tmp
+and then issue the following command ...
+
+<tscreen><verb>
+dbimport oblast /tmp/OBLAST.FUL
+</verb></tscreen>
+
+This will update the existing local oblast database or create it if
+it does not exist.
+
+<sect1>Checking available databases
+
+<P>
+Once a database is created, you will want to check that it has been
+added. To do this use the <em>dbavail</em> command. This will
+output the available databases. For example ...
+
+<tscreen><verb>
+dbavail
+DB Name Location Chain
+qsl Local
+buck GB7ADX
+hftest GB7DXM
+G0VGS de GB7MBC 3-Feb-2001 1925Z >
+</verb></tscreen>
+
+<sect1>Looking up databases
+
+<P>
+To look for information in a defined database, simply use the <em>dbshow</em>
+command, for example ...
+
+<tscreen><verb>
+dbshow buckmaster G0YLM
+</verb></tscreen>
+
+will show the information for the callsign G0YLM from the buckmaster
+database if it exists. To make things more standard for the users
+you can add an entry in the Aliases file so that it looks like a standard
+<em>show</em> command like this ...
+
+<tscreen><verb>
+'^sh\w*/buc', 'dbshow buckmaster', 'dbshow',
+</verb></tscreen>
+
+Now you can simply use show/buckmaster or an abreviation.
+
+<sect1>Removing databases
+
+<P>
+To delete an existing database you use the <em>dbremove</em> command.
+For example ...
+
+<tscreen><verb>
+dbremove oblast
+</verb></tscreen>
+
+would remove the oblast database and its associated datafile from the
+system. There are no warnings or recovery possible from this command.
+If you remove a database it ceases to exist and would have to be created
+from scratch if you still required it.
+
<sect>Information, files and useful programs
<sect1>MOTD
That is it! the kepler data has been updated.
+<sect1>The QRZ callbook
+
+<P>
+The command <em>sh/qrz</em> will only work once you have followed a few
+simple steps. First you need to get a user ID and password from qrz.com.
+Simply go to the site and create one. Secondly you need to copy the file
+/spider/perl/Internet.pm to /spider/local and alter it to match your user
+ID and password. You also at this point need to set $allow=1 to complete
+the setup. Many thanks to Fred Lloyd, the proprieter of
+<htmlurl url="http://www.qrz.com" name="qrz.com"> for allowing this access.
<sect>CVS
What happens next depends on whether you have an existing installation that
you want to update with the latest and greatest or whether you just want
to see what is there and/or run it on a new machine for testing.
-Either way you will want to change directory to a new place, if you want to
-update an existing installation then I suggest /tmp, otherwise choose a
-suitable place according to the normal installation instructions.
+
+If you are installing Spider from CVS then change directory to /home/sysop
+
+If you are wanting to update Spider then cd to /tmp
<P>
The next step will create a brand new 'spider' directory in your current
Remember to recompile the C client (cd /spider/src; make)
<P>
-At this point the files have been upgraded. You can (usually) restrt the cluster
+At this point the files have been upgraded. You can (usually) restart the cluster
in your own time. However, if you attempt to use any new commands or features
expect it to be fatal! At least your cluster will have been restarted then so it
will be too late to worry about it!
Show a list of callsigns that have been excluded (locked out) of the
cluster locally with the <em>set/lockout</em> command
+<sect1>show/log (8)
+
+<P>
+<tt>
+<bf>show/log [<callsign>]</bf> Show excerpts from the system log
+</tt>
+
+<P>
+This command outputs a short section of the system log. On its own
+it will output a general logfile. With the optional callsign it will
+show output from the log associated with that callsign.
+
<sect1>show/moon (0)
<P>
projects / spider.git / blobdiff