Various documentation changes

[spider.git] / cmd / Commands_en.hlp

diff --git a/cmd/Commands_en.hlp b/cmd/Commands_en.hlp
index b37a24f3cfbbba3cfce3dc7d296b896ea63d59c3..463d55e8800766b2d9716de66c3ff70accd963bd 100644 (file)
--- a/cmd/Commands_en.hlp
+++ b/cmd/Commands_en.hlp
@@ -91,7 +91,7 @@ some examples:-
 
 You can use the tag 'all' to accept everything, eg:
 
-  ann/spot 3 all
+  acc/spot 3 all
 
 but this probably for advanced users...
 
@@ -547,6 +547,14 @@ thru everything else on HF.
 
 The next filter line lets through just VHF/UHF spots from EU.
 
+=== 8^FORWARD/LATLONG <node_call>^Send latitude and longitude information to another cluster
+This command sends all the latitude and longitude information that your
+cluster is holding against callsigns.  One advantage of recieving this
+information is that more locator information is held by you.  This
+means that more locators are given on the DX line assuming you have
+SET/DXGRID enabled.  This could be a LOT of information though, so
+it is not recommended on slow links.
+
 === 1^FORWARD/OPERNAM <call>^Send out information on this <call> to all clusters
 This command sends out any information held in the user file which can 
 be broadcast in PC41 protocol packets. This information is Name, QTH, Location
@@ -687,11 +695,6 @@ etc). eg:-
 or 
    pc G1TLH Try doing that properly!!!
 
-=== 1^PING <node>^Send a ping command to another cluster
-This command is used to estimate the quality of the link to another cluster. 
-The time returned is the length of time taken for a PC51 to go to another 
-cluster and be returned.
-
 === 0^KILL <msgno> [<msgno> ...]^Remove or erase a message from the system
 You can get rid of any message to or originating from your callsign using 
 this command. You can remove more than one message at a time.
@@ -712,10 +715,11 @@ PC protocol to connected nodes either for testing or to unstick things.
 You can also use in the same way as a talk command to a connected user but
 without any processing, added of "from <blah> to <blah" or whatever.
  
-=== 1^PING <node call>^Find out the delays an a circuit to another node
-This command will enable sysops to determine the speed of an inter-cluster
-node. 
-
+=== 1^PING <node call>^Check the link quality between nodes
+This command allows you to send a frame to another cluster node on
+the network and get a return frame.  The time it takes to do this
+is a good indication of the quality of the link.  The actual time
+it takes is output to the console in seconds.
 Any visible cluster node can be PINGed.
 
 === 1^RCMD <node call> <cmd>^Send a command to another DX Cluster
@@ -735,10 +739,10 @@ message either sent by or sent to your callsign.
 === 5^READ-^
 As a sysop you may read any message on the system
 
-=== 0^REJECT/ANNOUNCE [0-9] <pattern>^Set an 'reject' filter line for announce
+=== 0^REJECT/ANNOUNCE [0-9] <pattern>^Set a 'reject' filter line for announce
 Create an 'reject this announce' line for a filter. 
 
-An reject filter line means that if the announce matches this filter it is
+A reject filter line means that if the announce matches this filter it is
 passed onto the user. See HELP FILTERS for more info. Please read this
 to understand how filters work - it will save a lot of grief later on.
 
@@ -775,10 +779,10 @@ default for nodes and users eg:-
   reject/ann input node_default by G,M,2
   reject/ann user_default by G,M,2
 
-=== 0^REJECT/SPOTS [0-9] <pattern>^Set an 'reject' filter line for spots
-Create an 'reject this spot' line for a filter. 
+=== 0^REJECT/SPOTS [0-9] <pattern>^Set a 'reject' filter line for spots
+Create a 'reject this spot' line for a filter. 
 
-An reject filter line means that if the spot matches this filter it is
+A reject filter line means that if the spot matches this filter it is
 dumped (not passed on). See HELP FILTERS for more info. Please read this
 to understand how filters work - it will save a lot of grief later on.
 
@@ -825,7 +829,7 @@ default for nodes and users eg:-
 
   reject/spot user_default by G,M,2
 
-=== 0^REJECT/WCY [0-9] <pattern>^set an 'reject' WCY filter
+=== 0^REJECT/WCY [0-9] <pattern>^set a 'reject' WCY filter
 It is unlikely that you will want to do this, but if you do then you can
 filter on the following fields:-
 
@@ -852,7 +856,7 @@ default for nodes and users eg:-
 
   reject/wcy gb7djk all
 
-=== 0^REJECT/WWV [0-9] <pattern>^set an 'reject' WWV filter
+=== 0^REJECT/WWV [0-9] <pattern>^set a 'reject' WWV filter
 It is unlikely that you will want to do this, but if you do then you can
 filter on the following fields:-
 
@@ -1343,6 +1347,12 @@ This command queries the QRZ callbook server on the internet
 and returns any information available for that callsign. This service
 is provided for users of this software by http://www.qrz.com 
 
+=== 0^SHOW/ROUTE <callsign> ...^Show the route to the callsign
+This command allows you to see which node the callsigns specified are
+connected. It is a sort of inverse sh/config.
+
+sh/route n2tly
+
 === 0^SHOW/SATELLITE <name> [<hours> <interval>]^Show tracking data
 Show the tracking data from your location to the satellite of your choice
 from now on for the next few hours.