+++ /dev/null
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
-<HTML>
-<HEAD>
- <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.16">
- <TITLE>The DXSpider User Manual v1.50: The DXSpider command reference</TITLE>
- <LINK HREF="usermanual-11.html" REL=previous>
- <LINK HREF="usermanual.html#toc12" REL=contents>
-<link rel=stylesheet href="style.css" type="text/css" title="default stylesheet">
-</HEAD>
-<BODY>
-Next
-<A HREF="usermanual-11.html">Previous</A>
-<A HREF="usermanual.html#toc12">Contents</A>
-<HR>
-<H2><A NAME="s12">12.</A> <A HREF="usermanual.html#toc12">The DXSpider command reference</A></H2>
-
-<P>Below is a complete list of commands available from the cluster prompt.
-These are listed below in alphabetical order. </P>
-
-<H2><A NAME="ss12.1">12.1</A> <A HREF="usermanual.html#toc12.1">accept/announce</A>
-</H2>
-
-<P><CODE><B>accept/announce [0-9] <pattern></B> Set an accept filter
-line for announce</CODE></P>
-
-<P>Create an 'accept this announce' line for a filter. </P>
-<P>An accept filter line means that if the announce matches this filter it is
-passed onto the user. See HELP FILTERS for more info. Please read this
-to understand how filters work - it will save a lot of grief later on.</P>
-<P>You can use any of the following things in this line:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- info <string> eg: iota or qsl
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- channel <prefixes>
- wx 1 filter WX announces
- dest <prefixes> eg: 6MUK,WDX (distros)
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>some examples:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- acc/ann dest 6MUK
- acc/ann 2 by_zone 14,15,16
- (this could be all on one line: acc/ann dest 6MUK or by_zone 14,15,16)
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>or</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- acc/ann by G,M,2
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>This filter would only allow announces that were posted buy UK stations.
-You can use the tag 'all' to accept everything eg:</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- acc/ann all
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>but this probably for advanced users...</P>
-
-<H2><A NAME="ss12.2">12.2</A> <A HREF="usermanual.html#toc12.2">accept/spots </A>
-</H2>
-
-<P><CODE><B>accept/spots [0-9] <pattern></B> Set an accept filter line for spots</CODE></P>
-
-<P>Create an 'accept this spot' line for a filter.</P>
-
-<P>An accept filter line means that if the spot matches this filter it is
-passed onto the user. See HELP FILTERS for more info. Please read this
-to understand how filters work - it will save a lot of grief later on.</P>
-<P>You can use any of the following things in this line:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
- on <range> same as 'freq'
- call <prefixes> eg: G,PA,HB9
- info <string> eg: iota or qsl
- by <prefixes>
- call_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- call_itu <numbers>
- call_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- origin <prefixes>
- channel <prefixes>
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<P>For frequencies, you can use any of the band names defined in
-SHOW/BANDS and you can use a subband name like: cw, rtty, data, ssb -
-thus: hf/ssb. You can also just have a simple range like: 0/30000 -
-this is more efficient than saying simply: freq HF (but don't get
-too hung up about that)</P>
-<P>some examples:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- acc/spot 1 on hf/cw
- acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>You can use the tag 'all' to accept everything, eg:</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- acc/spot 3 all
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>but this probably for advanced users...</P>
-
-<H2><A NAME="ss12.3">12.3</A> <A HREF="usermanual.html#toc12.3">accept/wcy </A>
-</H2>
-
-<P><CODE><B>accept/wcy [0-9] <pattern></B> set an accept WCY filter</CODE></P>
-
-<P>It is unlikely that you will want to do this, but if you do then you can
-filter on the following fields:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- channel <prefixes>
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<P>There are no examples because WCY Broadcasts only come from one place and
-you either want them or not (see UNSET/WCY if you don't want them).</P>
-<P>This command is really provided for future use.</P>
-<P>See HELP FILTER for information.</P>
-
-<H2><A NAME="ss12.4">12.4</A> <A HREF="usermanual.html#toc12.4">accept/wwv </A>
-</H2>
-
-<P><CODE><B>accept/wwv [0-9] <pattern></B> Set an accept WWV filter</CODE></P>
-
-<P>It is unlikely that you will want to do this, but if you do then you can
-filter on the following fields:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- channel <prefixes>
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>for example </P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- accept/wwv by_zone 4
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>is probably the only useful thing to do (which will only show WWV broadcasts
-by stations in the US).</P>
-<P>See HELP FILTER for information.</P>
-
-<H2><A NAME="ss12.5">12.5</A> <A HREF="usermanual.html#toc12.5">announce </A>
-</H2>
-
-<P><CODE><B>announce <text></B> Send an announcement to local users</CODE></P>
-
-<P>Send an announcement to LOCAL users only, where <text> is the text
-of the announcement you wish to broadcast</P>
-
-<H2><A NAME="ss12.6">12.6</A> <A HREF="usermanual.html#toc12.6">announce full </A>
-</H2>
-
-<P><CODE><B>announce full <text></B> Send an announcement cluster wide</CODE></P>
-
-<P>This command will send your announcement across the whole cluster
-network.</P>
-
-<H2><A NAME="ss12.7">12.7</A> <A HREF="usermanual.html#toc12.7">apropos </A>
-</H2>
-
-<P><CODE><B>apropos <string></B> Search the help database</CODE></P>
-
-<P>Search the help database for <string> (it isn't case sensitive),
-and print the names of all the commands that may be relevant.</P>
-
-<H2><A NAME="ss12.8">12.8</A> <A HREF="usermanual.html#toc12.8">bye </A>
-</H2>
-
-<P><CODE><B>bye</B> Exit from the cluster</CODE></P>
-
-<P>This will disconnect you from the cluster</P>
-
-<H2><A NAME="ss12.9">12.9</A> <A HREF="usermanual.html#toc12.9">clear/spots </A>
-</H2>
-
-<P><CODE><B>clear/spots [1|all]</B> Clear a spot filter line</CODE></P>
-
-<P>This command allows you to clear (remove) a line in a spot filter or to
-remove the whole filter.</P>
-<P>If you have a filter:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- acc/spot 1 on hf/cw
- acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>and you say:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- clear/spot 1
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>you will be left with:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>If you do:</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- clear/spot all
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>the filter will be completely removed.</P>
-
-<H2><A NAME="ss12.10">12.10</A> <A HREF="usermanual.html#toc12.10">dbavail </A>
-</H2>
-
-<P><CODE><B>dbavail</B> Show a list of all the databases in the system</CODE></P>
-
-<P>The title says it all really, this command lists all the databases defined
-in the system. It is also aliased to SHOW/COMMAND.</P>
-
-<H2><A NAME="ss12.11">12.11</A> <A HREF="usermanual.html#toc12.11">dbshow </A>
-</H2>
-
-<P><CODE><B>dbshow <dbname> <key></B> Display an entry, if it exists, in a database</CODE></P>
-
-<P>This is the generic user interface to the database to the database system.
-It is expected that the sysop will add an entry to the local Aliases file
-so that users can use the more familiar AK1A style of enquiry such as:</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/BUCK G1TLH
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>but if he hasn't and the database really does exist (use DBAVAIL or
-SHOW/COMMAND to find out) you can do the same thing with:</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- DBSHOW buck G1TLH
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss12.12">12.12</A> <A HREF="usermanual.html#toc12.12">directory </A>
-</H2>
-
-<P><CODE><B>directory</B> List messages<BR> <B>directory all</B> List all messages<BR>
-<B>directory own</B> List your own messages<BR>
-<B>directory new</B> List all new messages<BR>
-<B>directory to <call></B> List all messages to <call><BR>
-<B>directory from <call></B> List all messages from <call><BR>
-<B>directory subject <string></B> List all messages with <string> in subject<BR>
-<B>directory <nn></B> List last <nn> messages<BR>
-<B>directory <from>-<to></B> List messages <from> message <to> message <BR></CODE></P>
-
-<P>List the messages in the messages directory.</P>
-<P>If there is a 'p' one space after the message number then it is a
-personal message. If there is a '-' between the message number and the
-'p' then this indicates that the message has been read.</P>
-<P>You can use shell escape characters such as '*' and '?' in the <call>
-fields.</P>
-<P>You can combine some of the various directory commands together eg:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- DIR TO G1TLH 5
-or
- DIR SUBJECT IOTA 200-250
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>You can abbreviate all the commands to one letter and use ak1a syntax:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- DIR/T G1* 10
- DIR/S QSL 10-100 5
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss12.13">12.13</A> <A HREF="usermanual.html#toc12.13">dx </A>
-</H2>
-
-<P><CODE><B>dx [by <call>] <freq> <call> <remarks></B> Send a DX spot</CODE></P>
-
-<P>This is how you send a DX Spot to other users. You can, in fact, now
-enter the <freq> and the <call> either way round. </P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- DX FR0G 144.600
- DX 144.600 FR0G
- DX 144600 FR0G
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>will all give the same result. You can add some remarks to the end
-of the command and they will be added to the spot.</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- DX FR0G 144600 this is a test
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>You can credit someone else by saying:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- DX by G1TLH FR0G 144.600 he isn't on the cluster
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>The <freq> is compared against the available bands set up in the
-cluster. See SHOW/BANDS for more information.</P>
-
-<H2><A NAME="ss12.14">12.14</A> <A HREF="usermanual.html#toc12.14">help </A>
-</H2>
-
-<P><CODE><B>help <cmd></B> Get help on a command</CODE></P>
-
-<P>All commands can be abbreviated, so SHOW/DX can be abbreviated
-to SH/DX, ANNOUNCE can be shortened to AN and so on.</P>
-<P>Look at the APROPOS <string> command which will search the help database
-for the <string> you specify and give you a list of likely commands
-to look at with HELP.</P>
-
-<H2><A NAME="ss12.15">12.15</A> <A HREF="usermanual.html#toc12.15">kill </A>
-</H2>
-
-<P><CODE><B>kill <msgno> [<msgno> ..]</B> Delete a message from the local system</CODE></P>
-
-<P>Delete a message from the local system. You will only be able to
-delete messages that you have originated or been sent (unless you are
-the sysop).</P>
-
-<H2><A NAME="ss12.16">12.16</A> <A HREF="usermanual.html#toc12.16">links </A>
-</H2>
-
-<P><CODE><B>links</B> Show which nodes are physically connected</CODE></P>
-
-<P>This is a quick listing that shows which links are connected and
-some information about them. See WHO for a list of all connections.</P>
-
-<H2><A NAME="ss12.17">12.17</A> <A HREF="usermanual.html#toc12.17">read </A>
-</H2>
-
-<P><CODE><B>read</B> Read the next unread personal message addressed to you<BR>
-<B>read <msgno></B> Read the specified message<BR></CODE></P>
-
-<P>You can read any messages that are sent as 'non-personal' and also any
-message either sent by or sent to your callsign.</P>
-
-<H2><A NAME="ss12.18">12.18</A> <A HREF="usermanual.html#toc12.18">reject/announce</A>
-</H2>
-
-<P><CODE><B>reject/announce [0-9] <pattern></B> Set a reject filter
-for announce</CODE></P>
-
-<P>Create an 'reject this announce' line for a filter. </P>
-<P>An reject filter line means that if the announce matches this filter it is
-passed onto the user. See HELP FILTERS for more info. Please read this
-to understand how filters work - it will save a lot of grief later on.</P>
-<P>You can use any of the following things in this line:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- info <string> eg: iota or qsl
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- channel <prefixes>
- wx 1 filter WX announces
- dest <prefixes> eg: 6MUK,WDX (distros)
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>some examples:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- rej/ann by_zone 14,15,16 and not by G,M,2
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>You can use the tag 'all' to reject everything eg:</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- rej/ann all
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>but this probably for advanced users...</P>
-
-<H2><A NAME="ss12.19">12.19</A> <A HREF="usermanual.html#toc12.19">reject/spots </A>
-</H2>
-
-<P><CODE><B>reject/spots [0-9] <pattern></B> Set a reject filter line for spots</CODE></P>
-
-<P>Create a 'reject this spot' line for a filter. </P>
-<P>A reject filter line means that if the spot matches this filter it is
-dumped (not passed on). See HELP FILTERS for more info. Please read this
-to understand how filters work - it will save a lot of grief later on.</P>
-<P>You can use any of the following things in this line:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
- on <range> same as 'freq'
- call <prefixes> eg: G,PA,HB9
- info <string> eg: iota or qsl
- by <prefixes>
- call_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- call_itu <numbers>
- call_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- origin <prefixes>
- channel <prefixes>
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>For frequencies, you can use any of the band names defined in
-SHOW/BANDS and you can use a subband name like: cw, rtty, data, ssb -
-thus: hf/ssb. You can also just have a simple range like: 0/30000 -
-this is more efficient than saying simply: on HF (but don't get
-too hung up about that)</P>
-<P>some examples:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- rej/spot 1 on hf
- rej/spot 2 on vhf and not (by_zone 14,15,16 or call_zone 14,15,16)
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>You can use the tag 'all' to reject everything eg:</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- rej/spot 3 all
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>but this probably for advanced users...</P>
-
-<H2><A NAME="ss12.20">12.20</A> <A HREF="usermanual.html#toc12.20">reject/wcy </A>
-</H2>
-
-<P><CODE><B>reject/wcy [0-9] <pattern></B> Set a reject WCY filter</CODE></P>
-
-<P>It is unlikely that you will want to do this, but if you do then you can
-filter on the following fields:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- channel <prefixes>
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>There are no examples because WCY Broadcasts only come from one place and
-you either want them or not (see UNSET/WCY if you don't want them).</P>
-<P>This command is really provided for future use.</P>
-<P>See HELP FILTER for information.</P>
-
-<H2><A NAME="ss12.21">12.21</A> <A HREF="usermanual.html#toc12.21">reject/wwv </A>
-</H2>
-
-<P><CODE><B>reject/wwv [0-9] <pattern></B> Set a reject WWV filter</CODE></P>
-
-<P>It is unlikely that you will want to do this, but if you do then you can
-filter on the following fields:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- channel <prefixes>
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>for example </P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- reject/wwv by_zone 14,15,16
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>is probably the only useful thing to do (which will only show WWV broadcasts
-by stations in the US).</P>
-<P>See HELP FILTER for information.</P>
-
-<H2><A NAME="ss12.22">12.22</A> <A HREF="usermanual.html#toc12.22">reply </A>
-</H2>
-
-<P><CODE><B>reply</B> Reply (privately) to the last message that you have read<BR>
-<B>reply <msgno></B> Reply (privately) to the specified message<BR>
-<B>reply B <msgno></B> Reply as a Bulletin to the specified message<BR>
-<B>reply NOPrivate <msgno></B> Reply as a Bulletin to the specified
-message<BR>
-<B>reply RR <msgno></B> Reply to the specified message with read receipt<BR></CODE></P>
-
-<P>You can reply to a message and the subject will automatically have
-"Re:" inserted in front of it, if it isn't already present.</P>
-<P>You can also use all the extra qualifiers such as RR, PRIVATE,
-NOPRIVATE, B that you can use with the SEND command (see SEND
-for further details)</P>
-
-<H2><A NAME="ss12.23">12.23</A> <A HREF="usermanual.html#toc12.23">send </A>
-</H2>
-
-<P><CODE><B>send <call> [<call> ...]</B> Send a message to one or more callsigns<BR>
-<B>send RR <call></B> Send a message and ask for a read receipt<BR>
-<B>send COPY <msgno> <call></B> Send a copy of a message to someone<BR>
-<B>send PRIVATE <call></B> Send a personal message<BR>
-<B>send NOPRIVATE <call></B> Send a message to all stations<BR></CODE></P>
-
-<P>All the SEND commands will create a message which will be sent either to
-an individual callsign or to one of the 'bulletin' addresses. </P>
-<P>SEND <call> on its own acts as though you had typed SEND PRIVATE, that is
-it will mark the message as personal and send it to the cluster node that
-that callsign is connected to.</P>
-<P>You can have more than one callsign in all of the SEND commands.</P>
-<P>You can have multiple qualifiers so that you can have for example:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SEND RR COPY 123 PRIVATE G1TLH G0RDI
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>which should send a copy of message 123 to G1TLH and G0RDI and you will
-receive a read receipt when they have read the message.</P>
-<P>SB is an alias for SEND NOPRIVATE (or send a bulletin in BBS speak)
-SP is an alias for SEND PRIVATE</P>
-
-<H2><A NAME="ss12.24">12.24</A> <A HREF="usermanual.html#toc12.24">set/address </A>
-</H2>
-
-<P><CODE><B>set/address <your_address></B> Record your postal address</CODE></P>
-
-<P>Literally, record your address details on the cluster.</P>
-
-<H2><A NAME="ss12.25">12.25</A> <A HREF="usermanual.html#toc12.25">set/announce </A>
-</H2>
-
-<P><CODE><B>set/announce</B> Allow announce messages</CODE></P>
-
-<P>Allow announce messages to arrive at your terminal.</P>
-
-<H2><A NAME="ss12.26">12.26</A> <A HREF="usermanual.html#toc12.26">set/beep </A>
-</H2>
-
-<P><CODE><B>set/beep</B> Add beeps to terminal messages</CODE></P>
-
-<P>Add a beep to DX and other terminal messages.</P>
-
-<H2><A NAME="ss12.27">12.27</A> <A HREF="usermanual.html#toc12.27">set/dx </A>
-</H2>
-
-<P><CODE><B>set/dx</B>Allow DX messages to arrive at your terminal</CODE></P>
-
-<P>You can stop DX messages with the <EM>unset/dx</EM> command</P>
-
-<H2><A NAME="ss12.28">12.28</A> <A HREF="usermanual.html#toc12.28">set/dxgrid</A>
-</H2>
-
-<P><CODE><B>set/dxgrid</B>Allow grid squares on the end of DX messages</CODE></P>
-
-<P>Some logging programs do not like the additional information at
-the end of a DX spot. If this is the case, use the <EM>unset/dxgrid</EM>
-command to remove the grid squares.</P>
-
-<H2><A NAME="ss12.29">12.29</A> <A HREF="usermanual.html#toc12.29">set/echo </A>
-</H2>
-
-<P><CODE><B>set/echo</B> Make the cluster echo your input</CODE></P>
-
-<P>If you are connected via a telnet session, different implimentations
-of telnet handle echo differently depending on whether you are
-connected via port 23 or some other port. You can use this command
-to change the setting appropriately. </P>
-<P>You can remove the echo with the <EM>unset/echo</EM> command</P>
-<P>The setting is stored in your user profile.</P>
-<P>YOU DO NOT NEED TO USE THIS COMMAND IF YOU ARE CONNECTED VIA AX25.</P>
-
-<H2><A NAME="ss12.30">12.30</A> <A HREF="usermanual.html#toc12.30">set/here</A>
-</H2>
-
-<P><CODE><B>set/here</B> Set the here flag</CODE></P>
-
-<P>Let others on the cluster know you are here by only displaying your
-callsign. If you are away from your terminal you can use the <EM>unset/here</EM>
-command to let people know you are away. This simply puts brackets
-around your callsign to indicate you are not available.</P>
-
-<H2><A NAME="ss12.31">12.31</A> <A HREF="usermanual.html#toc12.31">set/homenode </A>
-</H2>
-
-<P><CODE><B>set/homenode <node_call></B> Set your home cluster</CODE></P>
-
-<P>Tell the cluster system where you normally connect to. Any Messages sent
-to you will normally find their way there should you not be connected.
-eg:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SET/HOMENODE gb7djk
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss12.32">12.32</A> <A HREF="usermanual.html#toc12.32">set/language </A>
-</H2>
-
-<P><CODE><B>set/language <language></B> Set the language you wish to use</CODE></P>
-
-<P>You can select the language that you want the cluster to use. Currently
-the languages available are <EM>en</EM> (English) <EM>sp</EM> (Spanish)
-and <EM>nl</EM> (Dutch).</P>
-
-<H2><A NAME="ss12.33">12.33</A> <A HREF="usermanual.html#toc12.33">set/location </A>
-</H2>
-
-<P><CODE><B>set/location <lat and long></B> Set your latitude and longitude</CODE></P>
-
-<P>You can set your latitude and longitude manually or alternatively use the
-<EM>set/qra</EM> command which will do the conversion for you.</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- set/location 54 04 N 2 02 E
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss12.34">12.34</A> <A HREF="usermanual.html#toc12.34">set/logininfo </A>
-</H2>
-
-<P><CODE><B>set/logininfo</B> Show logins and logouts of nodes and users</CODE></P>
-
-<P>Show users and nodes when they log in and out of the local cluster. You
-can stop these messages by using the <EM>unset/logininfo</EM> command.</P>
-
-<H2><A NAME="ss12.35">12.35</A> <A HREF="usermanual.html#toc12.35">set/name </A>
-</H2>
-
-<P><CODE><B>set/name <your_name></B> Set your name</CODE></P>
-
-<P>Tell the cluster what your name is, eg:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- set/name Dirk
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss12.36">12.36</A> <A HREF="usermanual.html#toc12.36">set/page </A>
-</H2>
-
-<P><CODE><B>set/page <n></B> Set the number of lines per page</CODE></P>
-
-<P>Tell the system how many lines you wish on a page when the number of lines
-of output from a command is more than this. The default is 20. Setting it
-explicitly to 0 will disable paging. </P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SET/PAGE 30
- SET/PAGE 0
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>The setting is stored in your user profile.</P>
-
-<H2><A NAME="ss12.37">12.37</A> <A HREF="usermanual.html#toc12.37">set/qra </A>
-</H2>
-
-<P><CODE><B>set/qra <locator></B> Set your QRA locator</CODE></P>
-
-<P>Tell the system what your QRA (or Maidenhead) locator is. If you have not
-done a SET/LOCATION then your latitude and longitude will be set roughly
-correctly (assuming your locator is correct ;-). For example:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SET/QRA JO02LQ
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss12.38">12.38</A> <A HREF="usermanual.html#toc12.38">set/qth</A>
-</H2>
-
-<P><CODE><B>set/qth <your QTH></B> Set your QTH</CODE></P>
-
-<P>Tell the system where your are. For example:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- set/qth East Dereham, Norfolk
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss12.39">12.39</A> <A HREF="usermanual.html#toc12.39">set/talk</A>
-</H2>
-
-<P><CODE><B>set/talk</B> Allow talk messages to be seen at your console</CODE></P>
-
-<P>Allow talk messages to arrive at your console. You can switch off
-talks with the <EM>unset/talk</EM> command.</P>
-
-<H2><A NAME="ss12.40">12.40</A> <A HREF="usermanual.html#toc12.40">set/wcy</A>
-</H2>
-
-<P><CODE><B>set/wcy</B> Allow WCY messages to be seen at your console</CODE></P>
-
-<P>Allow WCY information to be seen at your console. You can switch off
-WCY messages with the <EM>unset/wcy</EM> command.</P>
-
-<H2><A NAME="ss12.41">12.41</A> <A HREF="usermanual.html#toc12.41">set/wwv</A>
-</H2>
-
-<P><CODE><B>set/wwv</B> Allow WWV messages to be seen at your console</CODE></P>
-
-<P>Allow WWV information to be seen at your console. You can switch off
-WWV messages with the <EM>unset/wwv</EM> command.</P>
-
-<H2><A NAME="ss12.42">12.42</A> <A HREF="usermanual.html#toc12.42">set/wx </A>
-</H2>
-
-<P><CODE><B>set/wx</B> Allow WX messages to be seen at your console</CODE></P>
-
-<P>Allow WX information to be seen at your console. You can switch off
-WX messages with the <EM>unset/wx</EM> command.</P>
-
-<H2><A NAME="ss12.43">12.43</A> <A HREF="usermanual.html#toc12.43">show/configuration</A>
-</H2>
-
-<P><CODE><B>show/configuration [<node>]</B> Show all visible nodes and their users</CODE></P>
-
-<P>This command allows you to see all the users that can be seen
-and the nodes to which they are connected. With the optional <EM>node</EM>,
-you can specify a particular node to look at.</P>
-<P>This command is normally abbreviated to: sh/c</P>
-<P>BE WARNED: the list that is returned can be VERY long</P>
-
-<H2><A NAME="ss12.44">12.44</A> <A HREF="usermanual.html#toc12.44">show/configuration/node</A>
-</H2>
-
-<P><CODE><B>show/configuration/node</B> Show all the nodes connected</CODE></P>
-
-<P>Show all the nodes connected locally and the nodes they have connected.</P>
-
-
-<H2><A NAME="ss12.45">12.45</A> <A HREF="usermanual.html#toc12.45">show/date </A>
-</H2>
-
-<P><CODE><B>show/date [<prefix>|<callsign>]</B> Show
-the local time</CODE></P>
-
-<P>This is very nearly the same as SHOW/TIME, the only difference the format
-of the date string if no arguments are given.</P>
-<P>If no prefixes or callsigns are given then this command returns the local
-time and UTC as the computer has it right now. If you give some prefixes
-then it will show UTC and UTC + the local offset (not including DST) at
-the prefixes or callsigns that you specify.</P>
-
-<H2><A NAME="ss12.46">12.46</A> <A HREF="usermanual.html#toc12.46">show/dx </A>
-</H2>
-
-<P><CODE><B>show/dx [options]</B> interrogate the spot database</CODE></P>
-
-<P>If you just type SHOW/DX you will get the last so many spots
-(sysop configurable, but usually 10).</P>
-<P>In addition you can add any number of these options in very nearly
-any order to the basic SHOW/DX command, they are:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
-
-on <band> - eg 160m 20m 2m 23cm 6mm
-on <region> - eg hf vhf uhf shf (see SHOW/BANDS)
-
-<number> - the number of spots you want
-<from>-<to> - <from> spot no <to> spot no in
- the selected list
-
-<prefix> - for a spotted callsign beginning with <prefix>
-*<suffix> - for a spotted callsign ending in <suffix>
-*<string>* - for a spotted callsign containing <string>
-
-day <number> - starting <number> days ago
-day <from>-<to> - <from> days <to> days ago
-
-info <text> - any spots containing <text> in the info or remarks
-
-by <call> - any spots spotted by <call> (spotter <call>
- is the same).
-
-qsl - this automatically looks for any qsl info on the call
- held in the spot database.
-
-iota [<iota>] - If the iota island number is missing it will
- look for the string iota and anything which looks like
- an iota island number. If you specify then it will look
- for that island.
-
-qra [<locator>] - this will look for the specific locator if
- you specify one or else anything that looks like a locator.
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>e.g. </P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
-
- SH/DX 9m0
- SH/DX on 20m info iota
- SH/DX 9a on vhf day 30
- SH/DX rf1p qsl
- SH/DX iota
- SH/DX iota eu-064
- SH/DX qra jn86
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss12.47">12.47</A> <A HREF="usermanual.html#toc12.47">show/dxcc </A>
-</H2>
-
-<P><CODE><B>show/dxcc <prefix></B> Interrogate the spot database by country</CODE></P>
-
-<P>This command takes the <prefix> (which can be a full or partial
-callsign if desired), looks up which internal country number it is
-and then displays all the spots as per SH/DX for that country.</P>
-<P>The options for SHOW/DX also apply to this command.
-e.g. </P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
-
- SH/DXCC G
- SH/DXCC W on 20m info iota
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss12.48">12.48</A> <A HREF="usermanual.html#toc12.48">show/files </A>
-</H2>
-
-<P><CODE><B>show/files [<filearea> [<string>]]</B> List
-the contents of a filearea</CODE></P>
-
-<P>SHOW/FILES on its own will show you a list of the various fileareas
-available on the system. To see the contents of a particular file
-area type:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/FILES <filearea>
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>where <filearea> is the name of the filearea you want to see the
-contents of.</P>
-<P>You can also use shell globbing characters like '*' and '?' in a
-string to see a selection of files in a filearea eg:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/FILES bulletins arld*
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>See also TYPE - to see the contents of a file.</P>
-
-<H2><A NAME="ss12.49">12.49</A> <A HREF="usermanual.html#toc12.49">show/filter </A>
-</H2>
-
-<P><CODE><B>show/filter</B> Show the filters you have set</CODE></P>
-
-<P>Show the contents of all the filters that are set by you. This command
-displays all the filters set - for all the various categories.</P>
-
-<H2><A NAME="ss12.50">12.50</A> <A HREF="usermanual.html#toc12.50">show/moon </A>
-</H2>
-
-<P><CODE><B>show/moon [<prefix>|<callsign>]</B> Show moon
-rise and set times</CODE></P>
-
-<P>Show the Moon rise and set times for a (list of) prefixes or callsigns,
-together with the azimuth and elevation of the sun currently at those
-locations.</P>
-<P>If you don't specify any prefixes or callsigns, it will show the times for
-your QTH (assuming you have set it with either SET/LOCATION or SET/QRA),
-together with the current azimuth and elevation.</P>
-<P>In addition, it will show the gain or loss dB relative to the nominal
-distance of 385,000Km due to the ellipsoidal nature of the orbit.</P>
-<P>If all else fails it will show the Moonrise and set times for the node
-that you are connected to. </P>
-<P>For example:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/MOON
- SH/MOON G1TLH W5UN
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss12.51">12.51</A> <A HREF="usermanual.html#toc12.51">show/muf </A>
-</H2>
-
-<P><CODE><B>show/muf <prefix> [<hours>][long]</B> Show
-the likely propagation to <prefix></CODE></P>
-
-<P>This command allow you to estimate the likelihood of you contacting
-a station with the prefix you have specified. The output assumes a modest
-power of 20dBW and receiver sensitivity of -123dBm (about 0.15muV/10dB SINAD)</P>
-<P>The result predicts the most likely operating frequencies and signal
-levels for high frequency (shortwave) radio propagation paths on
-specified days of the year and hours of the day. It is most useful for
-paths between 250 km and 6000 km, but can be used with reduced accuracy
-for paths shorter or longer than this.</P>
-<P>The command uses a routine MINIMUF 3.5 developed by the U.S. Navy and
-used to predict the MUF given the predicted flux, day of the year,
-hour of the day and geographic coordinates of the transmitter and
-receiver. This routine is reasonably accurate for the purposes here,
-with a claimed RMS error of 3.8 MHz, but much smaller and less complex
-than the programs used by major shortwave broadcasting organizations,
-such as the Voice of America.</P>
-<P>The command will display some header information detailing its
-assumptions, together with the locations, latitude and longitudes and
-bearings. It will then show UTC (UT), local time at the other end
-(LT), calculate the MUFs, Sun zenith angle at the midpoint of the path
-(Zen) and the likely signal strengths. Then for each frequency for which
-the system thinks there is a likelihood of a circuit it prints a value.</P>
-<P>The value is currently a likely S meter reading based on the conventional
-6dB / S point scale. If the value has a '+' appended it means that it is
-1/2 an S point stronger. If the value is preceeded by an 'm' it means that
-there is likely to be much fading and by an 's' that the signal is likely
-to be noisy. </P>
-<P>By default SHOW/MUF will show the next two hours worth of data. You
-can specify anything up to 24 hours worth of data by appending the no of
-hours required after the prefix. For example:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/MUF W
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>produces:</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- RxSens: -123 dBM SFI: 159 R: 193 Month: 10 Day: 21
- Power : 20 dBW Distance: 6283 km Delay: 22.4 ms
- Location Lat / Long Azim
- East Dereham, Norfolk 52 41 N 0 57 E 47
- United-States-W 43 0 N 87 54 W 299
- UT LT MUF Zen 1.8 3.5 7.0 10.1 14.0 18.1 21.0 24.9 28.0 50.0
- 18 23 11.5 -35 mS0+ mS2 S3
- 19 0 11.2 -41 mS0+ mS2 S3
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>indicating that you will have weak, fading circuits on top band and
-80m but usable signals on 40m (about S3).</P>
-<P>inputing:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/MUF W 24
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>will get you the above display, but with the next 24 hours worth of
-propagation data.</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/MUF W L 24
- SH/MUF W 24 Long
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>Gives you an estimate of the long path propagation characterics. It
-should be noted that the figures will probably not be very useful, nor
-terrible accurate, but it is included for completeness.</P>
-
-<H2><A NAME="ss12.52">12.52</A> <A HREF="usermanual.html#toc12.52">show/prefix </A>
-</H2>
-
-<P><CODE><B>show/prefix <callsign></B> Interrogate the prefix database</CODE></P>
-
-<P>This command takes the <callsign> (which can be a full or partial
-callsign or a prefix), looks up which internal country number
-it is and then displays all the relevant prefixes for that country
-together with the internal country no, the CQ and ITU regions. </P>
-<P>See also SHOW/DXCC</P>
-
-<H2><A NAME="ss12.53">12.53</A> <A HREF="usermanual.html#toc12.53">show/qra </A>
-</H2>
-
-<P><CODE><B>show/qra <locator> [<locator>]</B> Show the distance
-between locators<BR>
-<B>show/qra <lat> <long></B> Convert latitude and longitude to a locator</CODE></P>
-
-<P>This is a multipurpose command that allows you either to calculate the
-distance and bearing between two locators or (if only one locator is
-given on the command line) the distance and beraing from your station
-to the locator. For example:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
-SH/QRA IO92QL
-SH/QRA JN06 IN73
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>The first example will show the distance and bearing to the locator from
-yourself, the second example will calculate the distance and bearing from
-the first locator to the second. You can use 4 or 6 character locators.</P>
-<P>It is also possible to convert a latitude and longitude to a locator by
-using this command with a latitude and longitude as an argument, for
-example:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
-SH/QRA 52 41 N 0 58 E
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss12.54">12.54</A> <A HREF="usermanual.html#toc12.54">show/qrz</A>
-</H2>
-
-<P><CODE><B>show/qrz <callsign></B> Show any callbook details on a callsign</CODE></P>
-
-<P>This command queries the QRZ callbook server on the internet
-and returns any information available for that callsign. This service
-is provided for users of this software by http://www.qrz.com </P>
-
-<H2><A NAME="ss12.55">12.55</A> <A HREF="usermanual.html#toc12.55">show/route </A>
-</H2>
-
-<P><CODE><B>show/route <callsign></B> Show the route to <callsign></CODE></P>
-
-<P>This command allows you to see to which node the callsigns specified are
-connected. It is a sort of inverse sh/config.</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- sh/route n2tly
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss12.56">12.56</A> <A HREF="usermanual.html#toc12.56">show/satellite </A>
-</H2>
-
-<P><CODE><B>show/satellite <name> [<hours> <interval>]</B>
-Show satellite tracking data</CODE></P>
-
-<P>Show the tracking data from your location to the satellite of your choice
-from now on for the next few hours.</P>
-<P>If you use this command without a satellite name it will display a list
-of all the satellites known currently to the system. </P>
-<P>If you give a name then you can obtain tracking data of all the passes
-that start and finish 5 degrees below the horizon. As default it will
-give information for the next three hours for every five minute period.</P>
-<P>You can alter the number of hours and the step size, within certain
-limits. </P>
-<P>Each pass in a period is separated with a row of '-----' characters</P>
-<P>So for example:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
-SH/SAT AO-10
-SH/SAT FENGYUN1 12 2
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss12.57">12.57</A> <A HREF="usermanual.html#toc12.57">show/sun </A>
-</H2>
-
-<P><CODE><B>show/sun [<prefix>|<callsign>]</B> Show
-sun rise and set times</CODE></P>
-
-<P>Show the sun rise and set times for a (list of) prefixes or callsigns,
-together with the azimuth and elevation of the sun currently at those
-locations.</P>
-<P>If you don't specify any prefixes or callsigns, it will show the times for
-your QTH (assuming you have set it with either SET/LOCATION or SET/QRA),
-together with the current azimuth and elevation.</P>
-<P>If all else fails it will show the sunrise and set times for the node
-that you are connected to. </P>
-<P>For example:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/SUN
- SH/SUN G1TLH K9CW ZS
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss12.58">12.58</A> <A HREF="usermanual.html#toc12.58">show/time </A>
-</H2>
-
-<P><CODE><B>show/time [<prefix>|<callsign>]</B> Show
-the local time</CODE></P>
-
-<P>If no prefixes or callsigns are given then this command returns the local
-time and UTC as the computer has it right now. If you give some prefixes
-then it will show UTC and UTC + the local offset (not including DST) at
-the prefixes or callsigns that you specify.</P>
-
-<H2><A NAME="ss12.59">12.59</A> <A HREF="usermanual.html#toc12.59">show/wcy </A>
-</H2>
-
-<P><CODE><B>show/wcy</B> Show the last 10 WCY broadcasts<BR>
-<B>show/wcy <n></B> Show the last <n> WCY broadcasts</CODE></P>
-
-<P>Display the most recent WCY information that has been received by the system</P>
-
-<H2><A NAME="ss12.60">12.60</A> <A HREF="usermanual.html#toc12.60">show/wwv</A>
-</H2>
-
-<P><CODE><B>show/wwv</B> Show the last 10 WWV broadcasts<BR>
-<B>show/wwv <n></B> Show the last <n> WWV broadcasts</CODE></P>
-
-<P>Display the most recent WWV information that has been received by the system</P>
-
-<H2><A NAME="ss12.61">12.61</A> <A HREF="usermanual.html#toc12.61">sysop </A>
-</H2>
-
-<P><CODE><B>sysop</B> Regain your privileges if you login remotely</CODE></P>
-
-<P>The system automatically reduces your privilege level to that of a
-normal user if you login in remotely. This command allows you to
-regain your normal privilege level. It uses the normal system: five
-numbers are returned that are indexes into the character array that is
-your assigned password (see SET/PASSWORD). The indexes start from
-zero.</P>
-<P>You are expected to return a string which contains the characters
-required in the correct order. You may intersperse those characters
-with others to obscure your reply for any watchers. For example (and
-these values are for explanation :-):</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- password = 012345678901234567890123456789
- > sysop
- 22 10 15 17 3
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>you type:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- aa2bbbb0ccc5ddd7xxx3n
- or 2 0 5 7 3
- or 20573
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>They will all match. If there is no password you will still be offered
-numbers but nothing will happen when you input a string. Any match is
-case sensitive.</P>
-
-<H2><A NAME="ss12.62">12.62</A> <A HREF="usermanual.html#toc12.62">talk </A>
-</H2>
-
-<P><CODE><B>talk <callsign></B> Enter talk mode with <callsign><BR>
-<B>talk <callsign> <text></B> Send a text message to <callsign><BR>
-<B>talk <callsign> > <node_call> [<text>]</B>
-Send a text message to <callsign> via <node_call></CODE></P>
-
-<P>Send a short message to any other station that is visible on the cluster
-system. You can send it to anyone you can see with a SHOW/CONFIGURATION
-command, they don't have to be connected locally.</P>
-<P>The second form of TALK is used when other cluster nodes are connected
-with restricted information. This usually means that they don't send
-the user information usually associated with logging on and off the cluster.</P>
-<P>If you know that G3JNB is likely to be present on GB7TLH, but you can only
-see GB7TLH in the SH/C list but with no users, then you would use the
-second form of the talk message.</P>
-<P>If you want to have a ragchew with someone you can leave the text message
-out and the system will go into 'Talk' mode. What this means is that a
-short message is sent to the recipient telling them that you are in a 'Talking'
-frame of mind and then you just type - everything you send will go to the
-station that you asked for. </P>
-<P>All the usual announcements, spots and so on will still come out on your
-terminal.</P>
-<P>If you want to do something (such as send a spot) you precede the normal
-command with a '/' character, eg:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- /DX 14001 G1TLH What's a B class licensee doing on 20m CW?
- /HELP talk
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>To leave talk mode type:</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- /EX
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss12.63">12.63</A> <A HREF="usermanual.html#toc12.63">type </A>
-</H2>
-
-<P><CODE><B>type <filearea>/<name></B> Look at a file in one of the fileareas</CODE></P>
-
-<P>Type out the contents of a file in a filearea. So, for example, in
-filearea 'bulletins' you want to look at file 'arld051' you would
-enter:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- TYPE bulletins/arld051
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>See also SHOW/FILES to see what fileareas are available and a
-list of content.</P>
-
-<H2><A NAME="ss12.64">12.64</A> <A HREF="usermanual.html#toc12.64">who </A>
-</H2>
-
-<P><CODE><B>who</B> Show who is physically connected locally</CODE></P>
-
-<P>This is a quick listing that shows which callsigns are connected and
-what sort of connection they have</P>
-
-<H2><A NAME="ss12.65">12.65</A> <A HREF="usermanual.html#toc12.65">wx </A>
-</H2>
-
-<P><CODE><B>wx <text></B> Send a weather message to local users<BR>
-<B>wx full <text> </B> Send a weather message to all cluster users</CODE></P>
-
-<P>Weather messages can sometimes be useful if you are experiencing an extreme
-that may indicate enhanced conditions</P>
-
-<HR>
-Next
-<A HREF="usermanual-11.html">Previous</A>
-<A HREF="usermanual.html#toc12">Contents</A>
-</BODY>
-</HTML>