3 # this file contains the system messages. Don't forget to reload them
4 # if you change them (load/messages)
13 addr => 'Address set to: $_[0]',
14 already => '$_[0] already connnected',
15 anns => 'Announce flag set on $_[0]',
16 annu => 'Announce flag unset on $_[0]',
17 annts => 'AnnTalk flag set on $_[0]',
18 anntu => 'AnnTalk flag unset on $_[0]',
19 badnode1 => '$_[0] is now a bad node',
20 badnode2 => '$_[0] is now a good node',
21 badnode3 => 'List of Bad Nodes:-',
22 bbse1 => 'Please enter your BBS address,, set/bbs <your bbs address>',
23 bbs => 'Your BBS Address is now \"$_[0]\"',
24 beepoff => 'Beeps are now off',
25 beepon => 'Beeps are now on',
26 call1 => 'Callsign lookup via $_[0]:',
27 conother => 'Sorry $_[0] you are connected to me on another port',
28 concluster => 'Sorry $_[0] you are already connected elsewhere on the cluster (on $_[1])',
29 conscript => 'no connect script called \"$_[0]\" found in $main::root/connect',
30 confail => 'connection to $_[0] failed ($_[1])',
31 constart => 'connection to $_[0] started',
32 deluser => 'User $_[0] has been deleted',
33 db1 => 'This database is hosted at $_[0]',
34 db2 => 'Sorry, but key: $_[0] was not found in $_[1]',
35 db3 => 'Sorry, database $_[0] doesn\'t exist here',
36 db4 => 'Sorry, database $_[0] located at $_[1] isn\'t currently online',
37 db5 => 'Accessing remote database on $_[0]...standby...',
38 db6 => 'Database $_[0] already exists, delete it first',
39 db7 => 'Database $_[0] created for remote node $_[1]',
40 db8 => 'Database $_[0] created locally',
41 db9 => 'Database $_[0] removed',
42 db10 => '$_[0] records imported into $_[1]',
43 db11 => 'Sending your request(s) to $_[0], please stand by...',
44 dfreq1 => 'Invalid freq $_[0] need: eg 0/30000 or hf or hf/cw',
45 dir1 => 'No messages found',
46 disc1 => 'Disconnected by $_[0]',
47 disc2 => 'Channel $_[0] disconnected',
48 disc3 => 'No Channel, but connection $_[0] disconnected',
49 disc4 => 'No Channel or connection but orphan $_[0] disconnected',
51 dup => 'Sorry, this is a duplicate',
52 dx1 => 'Frequency $_[0] not in band (see show/band); usage: DX [BY call] freq call comments',
53 dx2 => 'Need a callsign; usage: DX [BY call] freq call comments',
54 dx3 => 'The callsign or frequency is invalid',
55 dxs => 'DX Spots flag set on $_[0]',
56 dxu => 'DX Spots flag unset on $_[0]',
57 e1 => 'Invalid command',
59 e3 => '$_[0]: $_[1] not found',
60 e4 => 'Need at least a prefix or callsign',
62 e6 => '*** No station specified ***',
63 e7 => 'callsign $_[0] not visible on the cluster',
64 e8 => 'Need a callsign and some text',
65 e9 => 'Need at least some text',
66 e10 => '$_[0] not connected locally',
67 e11 => 'Can\'t use $main:mycall as target',
68 e12 => 'Need a node callsign',
69 e13 => '$_[0] is not a node',
70 e14 => 'First argument must be numeric and > 0',
71 e15 => 'invalid qualifier \"$_[0]\"',
72 e16 => 'File \"$_[0]\" exists',
73 e17 => 'Please don\'t use the words: @_ on here',
74 e18 => 'Cannot connect to $_[0] ($!)',
75 e19 => 'Invalid character in line',
76 e20 => 'token $_[0] not recognised',
77 e21 => '$_[0] not numeric',
78 e22 => '$_[0] not a callsign',
79 e23 => '$_[0] not a range (eg 0/30000)',
80 e24 => 'Sorry, Internet access is not enabled',
81 e25 => 'Sorry the value must be between $_[0] and $_[1]',
82 e26 => 'Too many concurrent errors, you are being disconnected',
83 e27 => '$_[0] not a numeric or a callsign prefix',
84 e28 => 'Sorry, you need to be registered (SP $main::myalias to register)',
85 e29 => 'Need a password',
87 echoon => 'Echoing enabled',
88 echooff => 'Echoing disabled',
89 echow => '*Echoing is currently disabled, set/echo to enable',
90 emaile1 => 'Please enter your email address, set/email <your e-mail address>',
91 emaila => 'Your E-Mail Address is now \"$_[0]\"',
92 email => 'E-mail address set to: $_[0]',
93 export1 => 'usage: export <msgno> <filename>',
94 export2 => '$_[3] has error exporting msg $_[0] to $_[1] ($_[2])',
95 export3 => '$_[2 ] exported msg $_[0] to $_[1]',
96 filter1 => 'Filter $_[0] updated for $_[1]',
97 filter2 => 'Unknown filter keyword $_[0]',
98 filter3 => 'No filters defined for $_[0]',
99 filter4 => '$_[0]$_[1] Filter $_[2] deleted for $_[3]',
100 filter5 => 'need some filter commands...',
101 filter6 => '$_[0]$_[1] Filter for $[2] not found',
102 grids => 'DX Grid flag set on $_[0]',
103 gridu => 'DX Grid flag unset on $_[0]',
104 illcall => 'Sorry, $_[0] is an invalid callsign',
105 hasha => '$_[0] already exists in $_[1]',
106 hashb => '$_[0] added to $_[1]',
107 hashc => '$_[0] removed from $_[1]',
108 hashd => '$_[0] not in $_[1]',
109 hashe => '$_[0] set on $_[1]',
110 helpe1 => 'Help system unavailable, tell sysop',
111 helpe2 => 'No help available on $_[0]',
112 heres => 'Here set on $_[0]',
113 heade1 => 'Using $main::mycall Coords, consider doing a set/location or set/qra',
114 hereu => 'Here unset on $_[0]',
115 homebbs => 'Home BBS set to: $_[0]',
116 homenode => 'Home Node set to: $_[0]',
117 hnodee1 => 'Please enter your Home Node, set/homenode <your home DX Cluster>',
118 hnodee2 => 'Failed to set homenode on $_[0]',
119 hnode => 'Your Homenode is now \"$_[0]\"',
120 init1 => 'sent initialisation message to $_[0]',
121 iso => '$_[0] Isolated',
122 isou => '$_[0] UnIsolated',
123 isoc => '$_[0] created and Isolated',
124 isoari => 'there is an input route filter for $_[0]; clear/route input $_[0] first',
125 isoaro => 'there is an output route filter for $_[0]; clear/route $_[0] first',
126 isow => '$_[0] is isolated; unset/isolate $_[0] first',
127 l1 => 'Sorry $_[0], you are already logged on on another channel',
128 l2 => 'Hello $_[0], this is $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build',
129 lang => 'Language is now $_[0]',
130 lange1 => 'set/language <lang> where <lang> is one of ($_[0])',
131 lange2 => 'failed to set language on $_[0]',
132 lh1 => '$main::data/hop_table.pl doesn\'t exist',
133 loce1 => 'Please enter your location,, set/location <latitude longitude>',
134 loce2 => 'Don\'t recognise \"$_[0]\" as a Lat/Long (eg 52 20 N 0 16 E)',
135 loce3 => '$_[0] is a QRA locator, please use: set/qra $_[0]',
136 loc => 'Your Lat/Long is now \"$_[0]\"',
137 lockout => '$_[0] Locked out',
138 lockoutc => '$_[0] Created and Locked out',
139 lockoutun => '$_[0] Unlocked',
140 lockoutuse => 'usage: sh/lockout <call>|ALL',
141 loginu => 'User $_[0] has logged in',
142 logoutu => 'User $_[0] has logged out',
143 loginn => 'Node $_[0] has logged in',
144 logoutn => 'Node $_[0] has logged out',
145 m1 => 'Enter Subject (30 characters):',
146 m2 => 'Copy of msg $_[0] sent to $_[1]',
147 m3 => 'Sorry, $_[0] is an unacceptable TO address',
148 m4 => 'Sorry, can\'t access message $_[0]',
149 m5 => 'Sorry, I need a message number',
150 m6 => 'Reply to: $_[0]',
151 m7 => 'Subject : $_[0]',
152 m8 => 'Enter Message /EX to send or /ABORT to exit',
153 m9 => 'New mail has arrived for you',
154 m10 => 'Message Aborted',
155 m11 => 'Message no $_[0] saved and directed to $_[1]',
156 m12 => 'Message no $_[0] deleted',
157 m13 => 'Message no $_[0] missing',
158 m14 => 'Message no $_[0] marked as sent to $_[1]',
159 m15 => 'Message no $_[0] unmarked as sent to $_[1]',
160 m16 => 'Need a Message number',
161 m17 => 'Sorry, cannot send messages in $_[0] mode',
162 msg1 => 'Bulletin Messages Queued',
163 msg2 => 'Private Messages Queued',
164 msg3 => 'Msg $_[0]: $_[1] changed from $_[2] to $_[3]',
165 msgu => 'usage: msg <cmd> <msgno> data...',
166 merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
167 moon => 'Location dd/mm/yyyy Rise Set',
168 moon_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
169 mond => 'Monitoring Disabled',
170 mone => 'Monitoring Enabled',
171 namee1 => 'Please enter your name, set/name <your name>',
172 namee2 => 'Can\'t find user $_[0]!',
173 name => 'Your name is now \"$_[0]\"',
174 nodea => '$_[0] set as AK1A style Node',
175 nodeac => '$_[0] created as AK1A style Node',
176 nodeb => '$_[0] set as BBS',
177 nodebc => '$_[0] created as BBS',
178 nodec => '$_[0] set as CLX style Node',
179 nodecc => '$_[0] created as CLX style Node',
180 noder => '$_[0] set as AR-Cluster style Node',
181 noderc => '$_[0] created as AR-Cluster style Node',
182 nodes => '$_[0] set as DXSpider style Node',
183 nodesc => '$_[0] created as DXSpider style Node',
184 nodex => '$_[0] set as DXNET style Node',
185 nodexc => '$_[0] created as DXNET style Node',
186 nodeu => '$_[0] set back as a User',
187 nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
188 notdone => 'NOT Done',
189 nothere => 'Sorry, but $_[0] isn\'t here at the moment, please try later',
190 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
191 ok => 'Operation successful',
192 outconn => 'Outstanding connect to $_[0]',
193 page => 'Press Enter to continue, A to abort ($_[0] lines) >',
194 pagelth => 'Page Length is now $_[0]',
195 passerr => 'Please use: SET/PASS <password> <callsign>',
196 password => 'Password set or changed for $_[0]',
197 passwordu => 'Password removed for $_[0]',
198 pingo => 'Ping Started to $_[0]',
199 pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs',
200 pinge1 => 'Cannot ping yourself!',
201 pingint => 'Ping interval on $_[0] set to $_[1] secs',
202 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]',
203 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
204 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
205 priv => 'Privilege level changed on $_[0]',
206 prx => '$main::mycall >',
207 pw0 => 'Enter old password: ',
208 pw1 => 'Enter new password: ',
209 pw2 => 'Re-enter new password: ',
210 pw3 => 'Password changed',
211 pw4 => 'Passwords differ, password NOT changed',
212 qll => 'Please enter your location with set/location or set/qra',
213 qthe1 => 'Please enter your QTH, set/qth <your qth>',
214 qth => 'Your QTH is now \"$_[0]\"',
215 qrae1 => 'Please enter your QRA locator, set/qra <qra locator> (eg set/qra JO02LQ)',
216 qrashe1 => 'Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS',
217 qrae2 => 'Don\'t recognise \"$_[0]\" as a QRA locator (eg JO02LQ)',
218 qra => 'Your QRA Locator is now \"$_[0]\"',
219 rcmdo => 'RCMD \"$_[0]\" sent to $_[1]',
220 read1 => 'Sorry, no new messages for you',
221 read2 => 'Msg $_[0] not found',
222 read3 => 'Msg $_[0] not available',
223 rec => '$_[0] records',
224 reg => '$_[0] registered',
225 regc => '$_[0] created and registered',
226 reginac => 'Registration is not active (set/var \$main::reqreg = 1 to activate)',
227 regun => '$_[0] unregistered',
228 route => '$_[0] on $_[1] via $_[2]',
229 sat1 => 'Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins',
230 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
231 sat3 => 'Syntax: SH/SAT <name> [<hours> <interval>]',
232 sat4 => 'Satellites available/Age of Keps (days):-',
233 satnf => 'Satellite $_[0] unknown',
235 sethop1 => 'usage: set/hops <call> ann|spots|wwv|wcy <no of hops>',
236 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
237 sethop3 => 'No hops set for $_[0]',
238 shutting => '$main::mycall shutting down...',
239 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
240 snode1 => 'Node Call Sort Version',
241 snode2 => '$_[0] $_[1] $_[2]',
242 snode3 => '$_[0] Unknown Call',
243 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
245 spf1 => 'spoof: creating new user $_[0]',
246 stathf => 'HF DX Spot Stats, last 31 days',
247 stathft => 'HF DX Spot Stats, last 31 days for DXCC $_[0]',
248 statvhf => 'VHF+ DX Spot Stats, last 31 days',
249 statvhft => 'VHF+ DX Spot Stats, last 31 days for DXCC $_[0]',
250 statdx => 'Total DX Spots last 31 days',
251 sun => 'Location dd/mm/yyyy Rise Set',
252 sun_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
253 suser1 => 'usage: callsign user_field_name value',
254 suser2 => 'User $_[0] not found',
255 suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
256 suser4 => 'User field name \'$_[0]\' doesn\'t exist',
257 time1 => 'Local Time: $_[0] $_[1], UTC $_[2]',
258 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Hours)',
259 time3 => '$_[0] $_[1]',
260 talks => 'Talk flag set on $_[0]',
261 talku => 'Talk flag unset on $_[0]',
262 talkend => 'Finished talking to you',
263 talkinst => 'Entering Talkmode, /EX to end, /<cmd> to run a command',
264 talknh => 'Sorry $_[0] is not online at the moment',
265 talkprompt => 'Talk ($_[0])>',
266 talkstart => 'Starting talking to you',
267 unsethop1 => 'usage: unset/hops <call> ann|spots|wwv|wcy',
268 unsethop2 => 'hops unset on $_[1] for $_[0]',
269 usernf => '*** User record for $_[0] not found ***',
270 wcy1 => '$_[0] is missing or out of range',
271 wcy2 => 'Duplicate WCY',
272 wwv1 => '$_[0] is missing or out of range',
273 wwv2 => 'Duplicate WWV',
274 wwvs => 'WWV flag set on $_[0]',
275 wwvu => 'WWV flag unset on $_[0]',
276 wxs => 'WX flag set on $_[0]',
277 wxu => 'WX flag unset on $_[0]',
280 addr => 'Addres gezet op: $_[0]',
281 already => '$_[0] reeds geconnect',
282 anns => 'Announce berichten AAN gezet voor $_[0]',
283 annu => 'Announce berichten UIT gezet voor $_[0]',
284 bbse1 => 'Geef je home bbs (mailbox),, set/bbs <home mailbox>',
285 bbs => 'Je home bbs (mailbox) is nu \"$_[0]\"',
286 beepoff => 'De beep staat nu UIT',
287 beepon => 'De beep staat nu AAN',
288 conother => 'Sorry $_[0] je bent reeds geconnect op een andere poort',
289 concluster => 'Sorry $_[0] je bent reeds op een ander cluster geconnect',
290 conscript => 'Geen connectscript aangeroepen \"$_[0]\" gevonden in $main::root/connect',
291 confail => 'Verbinding met $_[0] mislukt ($_[1])',
292 constart => 'Verbinding met $_[0] gestart',
293 disc1 => 'Gedisconnect door $_[0]',
294 disc2 => '$_[0] gedisconnect',
295 dx1 => 'Frequentie $_[0] valt niet binnen een band [Opdracht: DX freq call commentaar](Zie sh/band)',
296 dx2 => 'Ik heb een call nodig! [Opdracht: DX freq call commentaar]',
297 dxs => 'DX Spots worden WEL doorgegeven aan $_[0]',
298 dxu => 'DX Spots worden NIET doorgegeven aan $_[0]',
299 e1 => 'Ongeldige opdracht',
301 e3 => '$_[0]: $_[1] niet gevonden',
302 e4 => 'Minimaal een prefix of een call nodig',
303 e5 => 'Niet toegestaan',
304 e6 => '*** Geen station gespecifiseerd ***',
305 e7 => 'Callsign $_[0] is niet zichtbaar op het cluster',
306 e8 => 'Ik heb een call en tekst nodig',
307 e9 => 'Ik heb wel tekst nodig voor een announce!',
308 e10 => '$_[0] is niet lokaal verbonden',
309 e12 => 'Ik heb een node call nodig',
310 e13 => '$_[0] is geen node',
311 emaile1 => 'Geef uw E-mail addres, set/email <uw e-mail addres>',
312 emaila => 'Uw E-Mail addres is nu \"$_[0]\"',
313 email => 'E-mail addres gezet op: $_[0]',
314 helpe1 => 'Help systeem niet beschikbaar, meld dit aan de sysop',
315 helpe2 => 'Geen help beschikbaar over \"$_[0]\"',
316 heres => 'Aanwezigheid AAN gezet voor $_[0]',
317 heade1 => 'Gebruik gemaakt van de $main::mycall coordinaten, overweeg een set/location of set/qra',
318 hereu => 'Aanwezigheid UIT gezet voor $_[0]',
319 homebbs => 'Uw Home mailbox is nu $_[0]',
320 homenode => 'Uw (Home) DX-Cluster is : $_[0]',
321 hnodee1 => 'Geef mij uw lokale (home) DX-cluster, set/homenode <DX-cluster>',
322 hnode => 'Uw (home) DX-cluster is nu \"$_[0]\"',
323 iso => '$_[0] is geisoleerd (Isolated)',
324 isou => '$_[0] is niet meer geisoleerd (UnIsolated)',
325 isoc => '$_[0] gecreerd en geisoleerd (Isolated)',
326 l1 => 'Sorry $_[0], u bent reeds op een ander kanaal ingelogt',
327 l2 => 'Hallo $_[0], dit is $main::mycall in $main::myqth met DXSpider V$main::version',
328 lh1 => '$main::data/hop_table.pl bestaat niet',
329 loce1 => 'Geef uw coordinaten met, set/location <latitude longitude>',
330 loce2 => 'Herken \"$_[0]\" niet als Lat/Long (vb 52 20 N 0 16 E)',
331 loc => 'Uw Latitude en Longitude zijn nu \"$_[0]\"',
332 lockout => '$_[0] heeft geen toegang meer (Locked out)',
333 lockoutun => '$_[0] heeft wederom toegang (Unlocked)',
334 m2 => '$_[0] Informatie: $_[1]',
335 merge1 => 'Merge verzoek voor $_[1] spots en $_[2] WWV verzonden naar $_[0]',
336 msgnew => 'Er is nieuwe post gearriveerd voor u',
337 namee1 => 'Geef aub uw naam met, set/name <uw naam>',
338 namee2 => 'Gebruiker $_[0] niet te vinden!',
339 name => 'Uw naam is gezet op \"$_[0]\"',
340 node => '$_[0] gezet als een AK1A stijl DX-cluster',
341 nodeu => '$_[0] teruggezet naar gebruiker status',
342 nodec => '$_[0] gecreeerd als AK1A stijl DX-cluster',
343 nodee1 => 'U kunt deze opdracht niet uitvoeren zolang ($_[0]) on-line is',
344 ok => 'Opdracht succesvol uitgevoerd',
345 page => 'Druk op Enter om door te gaan, A om af te breken (nog $_[0] regels) >',
346 pagelth => 'Paginalengte gezet op ($_[0]) regels',
347 passerr => 'Gebruik: SET/PASS <wachtwoord> <call>',
348 password => 'Wachtwoord gezet of gewijzigd voor $_[0]',
349 pingo => 'Ping gestart naar $_[0]',
350 pingi => 'Ping ontvangen van $_[0] $_[1] (Ave $_[2]) secs',
351 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
352 pr2 => '($_[0]) de $main::mycall $_[1] $[2] >',
353 priv => 'Privilege level gewijzigd op $_[0]',
354 prx => '$main::mycall >',
355 qll => 'Geef uw locator met set/location of set/qra',
356 qthe1 => 'Geef uw woonplaats met, set/qth <woonplaats>',
357 qth => 'Uw QTH is nu \"$_[0]\"',
358 qrae1 => 'Geef uw QRA locator, set/qra <qra locator> (vb set/qra JO33FD)',
359 qrashe1 => 'Geef uw QRA locator, vbg sh/qra JO33FD of sh/qra JO33FD IO93NS',
360 qrae2 => 'Ik herken \"$_[0]\" niet als een QRA locator (vb JO33FD)',
361 qra => 'Uw QRA Locator is nu \"$_[0]\"',
362 rcmdo => 'RCMD \"$_[0]\" verzonden naar $_[1]',
363 read1 => 'Sorry, geen berichten voor u',
364 read2 => 'Bericht $_[0] niet gevonden',
365 read3 => 'Bericht $_[0] niet beschikbaar',
366 shutting => '$main::mycall gaat QRT...',
367 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
368 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
369 talks => 'Talk berichten AAN gezet voor $_[0]',
370 talku => 'Talk berichten UIT gezet voor $_[0]',
371 usernf => '*** Gebruiker info van $_[0] niet gevonden ***',
372 wwvs => 'WWV berichten AAN gezet voor $_[0]',
373 wwvu => 'WWV berichten UIT gezet voor $_[0]',
374 wxs => 'WX berichten AAN gezet voor $_[0]',
375 wxu => 'WX berichten UIT gezet voor $_[0]',
380 addr => 'Dirección es ahora: $_[0]',
381 already => '$_[0] ya esta conectado',
382 anns => 'Anuncios activados $_[0]',
383 annu => 'Anuncios desactivados $_[0]',
384 annts => 'AnnTalk activados $_[0]',
385 anntu => 'AnnTalk desactivados $_[0]',
386 badnode1 => '$_[0] es ahora un nodo indeseado',
387 badnode2 => '$_[0] es ahora un nodo normal',
388 badnode3 => 'Lista de nodos indeseados:-',
389 bbse1 => 'Por favor introduce la dirección de tu BBS,, set/bbs <tu bbs>',
390 bbs => 'Tu BBS es ahora \"$_[0]\"',
391 beepoff => 'Beeps desactivados',
392 beepon => 'Beeps activados',
393 call1 => 'Callsign lookup via $_[0]:',
394 conother => 'Lo siento $_[0] ya estás conectado en otro puerto',
395 concluster => 'Lo siento $_[0] ya estás conectado en otro cluster',
396 conscript => 'no hay ningún script que se llame \"$_[0]\" en $main::root/connect',
397 confail => 'conexión con $_[0] fallida ($_[1])',
398 constart => 'conexión con $_[0] ha comenzado',
399 deluser =>'El usuario $_[0] ha sido borrado',
400 db1 => 'Esta base de datos está en $_[0]',
401 db2 => 'Lo siento, pero la palabra: $_[0] no se encontró en $_[1]',
402 db3 => 'Lo siento, la base de datos $_[0] no existe aquí',
403 db4 => 'Lo siento, la base de datos $_[0] situada en $_[1] no se encuentra disponible',
404 db5 => 'Accediendo a la base de datos remota $_[0]...espere...',
405 db6 => 'Base de datos $_[0] ya existe, bórrala primero',
406 db7 => 'Base de datos $_[0] creada para el nodo remoto $_[1]',
407 db8 => 'Base de datos $_[0] creada localmente',
408 db9 => 'Base de datos $_[0] borrada',
409 db10 => '$_[0] registros importados para $_[1]',
410 db11 => 'Petición enviada a $_[0], por favor espera...',
411 dfreq1 => 'Frecuencia inválida $_[0] se necesita: ej 0/30000 o hf o hf/cw',
412 dir1 => 'No se encontró el mensage',
413 disc1 => 'Desconectado por $_[0]',
414 disc2 => '$_[0] desconectado',
415 disc3 => 'No Channel, but connection $_[0] disconnected',
416 disc4 => 'No Channel or connection but orphan $_[0] disconnected',
418 dup => 'Lo siento, esto es un duplicado',
419 dx1 => 'Frecuencia $_[0] fuera de banda (ver show/band); usa: DX [BY indicativo] frec indic. comentario',
420 dx2 => 'Necesita indicativo; usa: DX [BY indicativo] frec indic. comentario',
421 dx3 => 'El indicativo o la frecuencia es incorrecta',
422 dxs => 'DX Spots activado $_[0]',
423 dxu => 'DX Spots desactivado $_[0]',
424 e1 => 'Comando inválido',
425 e2 => 'Error: $_[0]',
426 e3 => '$_[0]: $_[1] no encontrado',
427 e4 => 'Se necesita, por lo menos, un prefijo o indicativo',
428 e5 => 'No permitido',
429 e6 => '*** No se ha especificado una estación ***',
430 e7 => 'indicativo $_[0] no visible en el cluster',
431 e8 => 'Se necesita un indicativo y algo de texto',
432 e9 => 'Se necesita al menos algo de texto',
433 e10 => '$_[0] no conectado en local',
434 e11 => 'Can\'t use $main:mycall as target',
435 e12 => 'Se necesita el indicativo del nodo',
436 e13 => '$_[0] no es un nodo',
437 e14 => 'El primer argumento debe de ser mumérico y > 0',
438 e15 => 'cualificador no válido \"$_[0]\"',
439 e16 => 'El fichero \"$_[0]\" ya existe',
440 e17 => 'Por favor no uses la palabra: @_ aqui',
441 e18 => 'No se puede conectar con $_[0] ($!)',
442 e19 => 'Caracter inválido en la linea',
443 e20 => 'señal $_[0] no reconocido',
444 e21 => '$_[0] no numérico',
445 e22 => '$_[0] no es un indicativo',
446 e23 => '$_[0] fuera de rango (ej: 0/30000)',
447 e24 => 'Lo siento, el acceso a internet no está habilitado',
448 e25 => 'Lo siento el valor debe de estar entre $_[0] y $_[1]',
449 e26 => 'Demasiados errores, serás desconectado',
450 e27 => '$_[0] no es un numero o un prefijo',
451 e28 => 'Lo siento, necesitas registrarte (SP $main::myalias para registrarte)',
452 e29 => 'Necesitas password',
454 echoon => 'Habilitado eco',
455 echooff => 'Deshabilitado eco',
456 echow => '*Eco está ahora deshabilitado, set/echo para habilitar',
457 emaile1 => 'Por favor introduce tu E-mail, set/email <tu E-mail>',
458 emaila => 'Tu dirección de E-Mail es ahora \"$_[0]\"',
459 email => 'E-mail es ahora: $_[0]',
460 export1 => 'usa: export <msgno> <filename>',
461 export2 => '$_[3] hubo un error exportando msg $_[0] to $_[1] ($_[2])',
462 export3 => '$_[2 ] exportando msg $_[0] to $_[1]',
463 filter1 => 'Filtro $_[0] actualizado para $_[1]',
464 filter2 => 'Necesito un valor para $_[0]',
465 filter3 => 'No hay filtros definidos para $_[0]',
466 filter4 => '$_[0]$_[1] Filtros $_[2] borrados para $_[3]',
467 filter5 => 'necesito algunos camandos para el filtro...',
468 filter6 => '$_[0]$_[1] Filtro para $[2] no encontrado',
469 grids => 'DX Grid está activado $_[0]',
470 gridu => 'DX Grid está desavtivado $_[0]',
471 illcall => 'Lo siento,$_[0] no es un indicativo válido',
472 hasha => '$_[0] ya existe en $_[1]',
473 hashb => '$_[0] añadido a $_[1]',
474 hashc => '$_[0] eliminado desde $_[1]',
475 hashd => '$_[0] no en $_[1]',
476 hashe => '$_[0] activado $_[1]',
477 helpe1 => 'La ayuda no esta disponible, avisa al sysop',
478 helpe2 => 'No hay ayuda disponible en $_[0]',
479 heres => 'Estás presente $_[0]',
480 heade1 => 'Usando $main::mycall Coords, se recomienda usar set/location o set/qra',
481 hereu => 'Estás ausente $_[0]',
482 homebbs => 'Tu BBS es ahora: $_[0]',
483 homenode => 'Tu Nodo habitual es ahora: $_[0]',
484 hnodee1 => 'Por favor introduce tu nodo local, set/homenode <tu DXCluster local>',
485 hnodee2 => 'Fallo al poner homenode en $_[0]',
486 hnode => 'Tu nodo habitual es ahora \"$_[0]\"',
487 init1 => 'enviando mensaje de inicialización a $_[0]',
488 iso => '$_[0] Aislado',
489 isou => '$_[0] en red',
490 isoc => '$_[0] creado y aislado',
491 isoari => 'Ya hay un input route filter para $_[0]; clear/route input $_[0] primero',
492 isoaro => 'Ya hay un output route filter para $_[0]; clear/route $_[0] primero',
493 isow => '$_[0] está aislado; unset/isolate $_[0] primero',
494 l1 => 'Lo siento $_[0], ya estás conectado en otro canal',
495 l2 => 'Hola $_[0], este es $main::mycall en $main::myqth usando DXSpider V$main::version',
496 lang => 'El idioma es ahora $_[0]',
497 lange1 => 'set/language <lang> cuando <lang> es uno de ($_[0])',
498 lange2 => 'fallo al poner idioma en $_[0]',
499 lh1 => '$main::data/hop_table.pl no existe',
500 loce1 => 'Por favor introduce tu posición, set/location <latitud longitud>',
501 loce2 => 'No reconocida \"$_[0]\" como una Lat/Long (eg 52 20 N 0 16E)',
502 loce3 => '$_[0] es un QRA locator, por favor usa: set/qra $_[0]',
503 loc => 'Tu Lat/Long es ahora \"$_[0]\"',
504 lockout => '$_[0] Boloqueado',
505 lockoutc => '$_[0] Creado y bloqueado',
506 lockoutun => '$_[0] Desbloqueado',
507 lockoutuse => 'usa: sh/lockout <call>|ALL',
508 loginu => 'Usuario $_[0] conectado',
509 logoutu => 'Usuario $_[0] desconectado',
510 loginn => 'Nodo $_[0] conectado',
511 logoutn => 'Nodo $_[0] desconectado',
512 m1 => 'Introduce título (30 caracteres):',
513 m2 => 'Copia del mensaje $_[0] enviada a $_[1]',
514 m3 => 'Lo siento, $_[0] no se puede enviar TO dirección',
515 m4 => 'Lo siento, no puedo acceder al mensaje $_[0]',
516 m5 => 'Lo siento, se necesita un número de mensaje',
517 m6 => 'Reenviado a: $_[0]',
518 m7 => 'Título : $_[0]',
519 m8 => 'Introduce mensaje /EX para enviar o /ABORT para salir',
520 m9 => 'Hay correo nuevo para ti.Borralo una vez leido.',
521 m10 => 'mensaje interrumpido',
522 m11 => 'mensaje nr $_[0] guardado y enviado a $_[1]',
523 m12 => 'mensaje nr $_[0] borrado',
524 m13 => 'mensaje nr $_[0] no encontrado',
525 m14 => 'mensaje nr $_[0] marcado para enviar a $_[1]',
526 m15 => 'mensaje nr $_[0] desmarcado para ser enviado a $_[1]',
527 m16 => 'Necesito un número de mensaje',
528 m17 => 'Lo siento, no puedo enviar el mensaje en $_[0] modo',
529 msg1 => 'Bulletin Messages Queued',
530 msg2 => 'Private Messages Queued',
531 msg3 => 'Msg $_[0]: $_[1] cambiado en $_[2] to $_[3]',
532 msgu => 'usa: msg <cmd> <msgno> data...',
533 merge1 => 'Petición de envío desde $_[1] spots y $_[2] WWV enviados a $_[0]',
534 moon => 'QTH dd/mm/yyyy Salida Puesta',
535 moon_with_azel => 'QTH dd/mm/yyyy Salida Puesta Azim Elev',
536 mond => 'Monitorado deshabilitado',
537 mone => 'Monitorado habilitado',
538 namee1 => 'Por favor, introduce tu nombre set/name <tu nombre>',
539 namee2 => 'No se encuentra el usuario $_[0]!',
540 name => 'Tu nombre es ahora \"$_[0]\"',
541 nodea => '$_[0] fijado como nodo AK1A ',
542 nodeac => '$_[0] creado como nodo AK1A ',
543 nodeb => '$_[0] fijado como BBS',
544 nodebc => '$_[0] creado como BBS',
545 nodec => '$_[0] fijado como nodo CLX ',
546 nodecc => '$_[0] creado como nodo CLX ',
547 noder => '$_[0] fijado como nodo AR-Cluster ',
548 noderc => '$_[0] creado como nodo AR-Cluster ',
549 nodes => '$_[0] fijado como nodo DXSpider ',
550 nodesc => '$_[0] creado como nodo DXSpider ',
551 nodex => '$_[0] fijado como nodo DXNET ',
552 nodexc => '$_[0] creado como nodo DXNET ',
553 nodeu => '$_[0] es ahora un usuario',
554 nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
555 notdone => 'NO se pudo hacer',
556 nothere => 'Lo siento, pero $_[0] no esta aqui ahora, intentalo mas tarde',
557 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
558 ok => 'Operación realizada',
559 outconn => 'Iniciando conexion con $_[0]',
560 page => 'Teclea Enter para continuar, A para abortar ($_[0] lineas) >',
561 pagelth => 'La longitud de las páginas es ahora $_[0]',
562 passerr => 'Por favor usa: SET/PASS <password> <indicativo>',
563 password => 'Password ajustado o cambiado para $_[0]',
564 pingo => 'Iniciado el ping a $_[0]',
565 pingi => 'Retorno del ping desde $_[0] $_[1] (Ave $_[2]) secs',
566 pinge1 => 'No puedes enviarte un ping a ti mismo!',
567 pingint => 'Intervalo de ping en $_[0] ajustado para $_[1] segundos',
568 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]',
569 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
570 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
571 priv => 'Nivel de privilegios en $_[0]',
572 prx => '$main::mycall >',
573 pw0 => 'Teclea el password antiguo: ',
574 pw1 => 'Teclea el password nuevo: ',
575 pw2 => 'Teclea otra vez el password nuevo: ',
576 pw3 => 'Password cambiado',
577 pw4 => 'Los passwords no coinciden, NO se han cambiado',
578 qll => 'Por favor introduce tu locator con set/location o set/qra',
579 qthe1 => 'Por favor introduce tu QTH, set/qth <tu qth>',
580 qth => 'Tu QTH es ahora \"$_[0]\"',
581 qrae1 => 'Por favor introduce tu QRA locator, set/qra <qra locator> (ej: set/qra JO02LQ)', qrashe1 => 'Por favor introduce un QRA locator, ej sh/qra JO02LQ o sh/qra JO02LQ IO93NS', qrae2 => 'No reconocido \"$_[0]\" como un QRA locator (ej JO02LQ)',
582 qrashe1 => 'Por favor introduce un QRA locator, ej set/qra JO02LQ o sh/qra JO02LQ IO93NS',
583 qrae2 => 'No se reconocio \"$_[0]\" como un QRA locator ( ej JO02LQ)',
584 qra => 'Tu QRA Locator es ahora \"$_[0]\"',
585 rcmdo => 'RCMD \"$_[0]\" enviado a $_[1]',
586 read1 => 'Lo siento, no hay mensajes nuevos para ti',
587 read2 => 'Msg $_[0] no encontrado',
588 read3 => 'Msg $_[0] no disponible',
589 rec => '$_[0] registros',
590 reg => '$_[0] registrado',
591 regc => '$_[0] creado y registrado',
592 reginac => 'El registro no está activ (set/var \$main::regreq = 1 para activarlo)',
593 regun => '$_[0] borrado',
594 route => '$_[0] en $_[1] via $_[2]',
595 sat1 => 'Tabla de seguimiento $_[0] para las proximas $_[1] horas cada $_[2] minutos',
596 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
597 sat3 => 'Sintaxis: SH/SAT <nombre> [<horas> <intervalo>]',
598 sat4 => 'Satélites disponibles:-',
599 satnf => 'Satélite $_[0] desconocido',
601 sethop1 => 'usa: set/hops <call> ann|spots|wwv|wcy <nr de hops>',
602 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
603 sethop3 => 'No hay hops definidos para $_[0]',
604 shutting => '$main::mycall shutting down...',
605 sloc => 'Cluster lat $_[0] long $_[1], NO OLVIDES CAMBIAR TU DXVars.pm',
606 snode1 => 'Nodo Call Sort Version',
607 snode2 => '$_[0] $_[1] $_[2]',
608 snode3 => '$_[0] Indicativo desconocido',
609 sqra => 'Cluster QRA Locator$_[0], NO OLVIDES CAMBIAR TU DXVars.pm',
610 sorry => 'Lo siento',
611 spf1 => 'spoof: creando nuevo usuario $_[0]',
612 stathf => 'Estadísticas de spots en HF de los últimos 31 dias',
613 stathft => 'Estadísticas de spots en HF de los últimos 31 dias para DXCC $_[0]',
614 statvhf => 'VHF+ DX Spot Stats, ultimos 31 dias',
615 statvhft => 'VHF+ DX Spot Stats, ultimos 31 dias para DXCC $_[0]',
616 statdx => 'Total DX Spots ultimos 31 dias',
617 sun => 'QTH dd/mm/yyyy Salida Puesta',
618 sun_with_azel => 'QTH dd/mm/yyyy Salida Puesta Azim Elev',
619 suser1 => 'usa: indicativo user_field_name value',
620 suser2 => 'Usuario $_[0] no encontrado',
621 suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
622 suser4 => 'User field name \'$_[0]\' doesn\'t exist',
623 time1 => 'Horario local: $_[0] $_[1], UTC $_[2]',
624 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Horas)',
625 time3 => '$_[0] $_[1]',
626 talks => 'Talk activado $_[0]',
627 talku => 'Talk desactivado $_[0]',
628 talkend => 'Finalizado modo talk contigo',
629 talkinst => 'Entrando en modo talk, /EX para salir, /<cmd> para ejecutar un comando',
630 talknh => 'Lo siento $_[0] no est conectado en este momento',
631 talkprompt => 'Talk ($_[0])>',
632 talkstart => 'Iniciando modo talk contigo',
633 usernf => '*** User record for $_[0] no encontrado ***',
634 wwvs => 'WWV activado $_[0]',
635 wwvu => 'WWV desactivado $_[0]',
636 wxs => 'WX activado $_[0]',
637 wxu => 'WX desactivado $_[0]',
640 addr => 'Adresse gesetzt auf: $_[0]',
641 already => '$_[0] bereits connnected',
642 anns => 'Announce flag gesetzt auf $_[0]',
643 annu => 'Announce flag zurueckgesetzt auf $_[0]',
644 annts => 'AnnTalk flag gesetzt auf $_[0]',
645 anntu => 'AnnTalk flag zurueckgesetzt auf $_[0]',
646 badnode1 => '$_[0] ist nun ein bad node',
647 badnode2 => '$_[0] ist nun ein good node',
648 badnode3 => 'Liste der Bad Nodes:-',
649 bbse1 => 'Bitte die BBS Adresse eingeben,, set/bbs <your bbs address>',
650 bbs => 'Deine BBS Adresse ist nun \"$_[0]\"',
651 beepoff => 'Beeps sind nun aus',
652 beepon => 'Beeps sind nun eingeschaltet',
653 call1 => 'Callsign lookup via $_[0]:',
654 conother => 'Sorry $_[0] Du bist zu mir auf einem anderen Port connected',
655 concluster => 'Sorry $_[0] Du bist schon anderswo in einem Cluster connected (on $_[1])',
656 conscript => 'Kein connect script mit Namen \"$_[0]\" gefunden in $main::root/connect',
657 confail => 'Verbindung zu $_[0] misslungen ($_[1])',
658 constart => 'Verbindung zu $_[0] gestartet',
659 deluser => 'User $_[0] wurde geloescht',
660 db1 => 'Diese Datenbank ist untergebracht bei $_[0]',
661 db2 => 'Sorry, aber Scluesselwort: $_[0] wurde nicht gefunden in $_[1]',
662 db3 => 'Sorry, Datenbank $_[0] existiert hier nicht',
663 db4 => 'Sorry, Datenbank $_[0] untergebracht bei $_[1] ist nicht online',
664 db5 => 'Zugriff auf remote Datenbank bei $_[0]...standby...',
665 db6 => 'Datenbank $_[0] existiert bereits, bitte zuerst loeschen',
666 db7 => 'Datenbank $_[0] angelegt fuer remote Cluster $_[1]',
667 db8 => 'Datenbank $_[0] lokal angelegt',
668 db9 => 'Datenbank $_[0] entfernt',
669 db10 => '$_[0] Datensaetze importiert in $_[1]',
670 db11 => 'Sende Deine Anfrage(n)an $_[0], bitte stand by...',
671 dfreq1 => 'Ungueltige Freq $_[0] brauche: z.B. 0/30000 oder hf oderr hf/cw',
672 dir1 => 'Keine Nachricht gefunden',
673 disc1 => 'Disconnected von $_[0]',
674 disc2 => 'Kanal $_[0] disconnected',
675 disc3 => 'Kein Kanal, aber Verbindung $_[0] disconnected',
676 disc4 => 'Kein Kanal oder Verbindung, aber Waise $_[0] disconnected',
678 dup => 'Sorry, dies ist ein Duplikat',
679 dx1 => 'Frequenz $_[0] nicht im Band (siehe show/band); Gebrauch: DX [BY call] Freq Call Kommentar',
680 dx2 => 'Brauche ein Rufzeichen; Gebrauch: DX [BY call] Freq Call Kommentar',
681 dx3 => 'Das Rufzeichen oder Frequenz ist ungueltig',
682 dxs => 'DX Spots flag gesetzt auf $_[0]',
683 dxu => 'DX Spots flag zurueckgesetzt auf $_[0]',
684 e1 => 'Ungueltiger Befehl',
685 e2 => 'Fehler: $_[0]',
686 e3 => '$_[0]: $_[1] nicht gefunden',
687 e4 => 'Brauche zumindestens einen Prefix oder ein Rufzeichen',
688 e5 => 'Nicht erlaubt',
689 e6 => '*** Keine Station angegeben ***',
690 e7 => 'Rufzeichen $_[0] nicht sichtbar im Cluster',
691 e8 => 'Brauche ein Rufzeichen und etwas Text',
692 e9 => 'Brauche wenigstens etwas Text',
693 e10 => '$_[0] nicht lokal connected',
694 e11 => 'Kann nicht $main:mein Rufzeichen als Ziel',
695 e12 => 'Brauche ein Node Rufzeichen',
696 e13 => '$_[0] ist kein Node',
697 e14 => 'Erstes Argument muss eine Zahl und > 0 sein',
698 e15 => 'Unguelitges Abfragekriterium \"$_[0]\"',
699 e16 => 'Datei \"$_[0]\" existiert',
700 e17 => 'Bitte gebrauche dieses Wort: @_ nicht hier',
701 e18 => 'Kann nicht verbinden mit $_[0] ($!)',
702 e19 => 'Ungueltiger Character in der Zeile',
703 e20 => 'Kuerzel $_[0] nicht erkannt',
704 e21 => '$_[0] nicht numerisch',
705 e22 => '$_[0] kein Rufzeichen',
706 e23 => '$_[0] kein Bereich (z.B. 0/30000)',
707 e24 => 'Sorry, Internet Zugriff ist nichtfreigeschaltet',
709 e25 => 'Sorry der Wert muss zwischen $_[0] und $_[1] sein',
710 e26 => 'Zu viele Fehler gleichzeitig, Du wirst disconnected',
711 e27 => '$_[0] kein numerisches oder Rufzeichen Prefix',
712 e28 => 'Sorry, Du musst Dich registrieren (SP $main::myalias to register)',
713 e29 => 'Brauche eine Passwort',
714 echoon => 'Echo enabled',
715 echooff => 'Echo disabled',
716 echow => '*Echo ist im moment disabled, set/echo to enable',
717 emaile1 => 'Bitte email Addresse eingeben, set/email <Deine e-mail Adresse>',
718 emaila => 'Deine E-Mail Adresse ist nun \"$_[0]\"',
719 email => 'E-mail Adresse gesetzt auf: $_[0]',
720 export1 => 'Gebrauch: export <msgno> <dateiname>',
721 export2 => '$_[3] has error exporting msg $_[0]to $_[1] ($_[2])',
722 export3 => '$_[2 ] exportierte msg $_[0] to $_[1]',
723 filter1 => 'Filter $_[0] upgedated fuer $_[1]',
724 filter2 => 'Unbekanntes Filter Schluesselwort $_[0]',
725 filter3 => 'Keine Filter definiert fuer $_[0]',
726 filter4 => '$_[0]$_[1] Filter $_[2] geloescht fuer$_[3]',
727 filter5 => 'brauche ein paar Filter Kommandos...',
728 filter6 => '$_[0]$_[1] Filter fuer $[2] nicht gefunden',
729 grids => 'DX Grid flag gesetzt auf $_[0]',
730 gridu => 'DX Grid flag zurueckgesetzt auf $_[0]',
731 illcall => 'Sorry, $_[0] ist ein ungueltiges Rufzeichen',
732 hasha => '$_[0] existiert bereits in $_[1]',
733 hashb => '$_[0] zugefuegt zu $_[1]',
734 hashc => '$_[0] entfernt von $_[1]',
735 hashd => '$_[0] nicht in $_[1]',
736 hashe => '$_[0] gesetzt auf $_[1]',
737 helpe1 => 'Hilfe System nicht verfuegbar, bitte Sysop benachrichtigen',
738 helpe2 => 'Keine Hilfe verfuegbar auf $_[0]',
739 heres => 'Hier gesetzt auf $_[0]',
740 heade1 => 'Using $main::mycall Coords, entspricht einem set/location or set/qra',
741 hereu => 'Here zurueckgesetzt auf $_[0]',
742 homebbs => 'Heimat BBS gesetzt auf: $_[0]',
743 homenode => 'Heimat Node gesetzt auf: $_[0]',
744 hnodee1 => 'Bitte Heimat Node eingeben, set/homenode <dein Heimat DX Cluster>',
745 hnodee2 => 'Heimat Node setzen ist misslungen $_[0]',
746 hnode => 'Dein Heimat Node ist nun \"$_[0]\"',
747 init1 => 'Initialisierungs Nachricht gesendet an $_[0]',
748 iso => '$_[0] Isoliert',
749 isou => '$_[0] UnIsoliert',
750 isoc => '$_[0] erstellt und Isoliert',
751 isoari => 'Es gibt einen Eingabe Route Filter fuer $_[0]; clear/route input $_[0] zuerst',
752 isoaro => 'Es gibt einen Ausgabe Route Filter fuer $_[0]; clear/route $_[0] zuerst',
753 isow => '$_[0] ist isoliert; unset/isolate $_[0] zuerst',
754 l1 => 'Sorry $_[0], Du bist bereit auf einem anderen Kanal eingeloggt',
755 l2 => 'Moin $_[0], hier ist $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build',
756 lang => 'Sprache ist jetzt $_[0]',
757 lange1 => 'set/language <lang> wobei <lang> ist eine von ($_[0])',
758 lange2 => 'Fehler beim setzen der Sprache auf $_[0]',
759 lh1 => '$main::data/hop_table.pl existiert nicht',
760 loce1 => 'Bitte Deinen Standort eingeben,, set/location <latitude longitude>',
761 loce2 => 'Nicht anerkannt \"$_[0]\" als Lat/Long (z.B. 52 20 N 0 16 E)',
762 loce3 => '$_[0] ist ein QRA Locator, gebrauch: set/qra $_[0]',
763 loc => 'Dein Lat/Long ist nun \"$_[0]\"',
764 lockout => '$_[0] ausgesperrt',
765 lockoutc => '$_[0] erstellt und ausgesperrt',
766 lockoutun => '$_[0] Aussperrung aufgehoben',
767 lockoutuse => 'Gebrauch: sh/lockout <Rufzeichen>|ALL',
768 loginu => 'User $_[0] hat eingeloggt',
769 logoutu => 'User $_[0] hat ausgeloggt',
770 loginn => 'Node $_[0] hat eingeloggt',
771 logoutn => 'Node $_[0] hat ausgeloggt',
772 m1 => 'Subjekt eingeben (30 Zeichen):',
773 m2 => 'Kopie der msg $_[0] gesendet an $_[1]',
774 m3 => 'Sorry, $_[0] ist keine akzeptable TO Adresse',
775 m4 => 'Sorry, kann nicht zugreifen auf Nachricht $_[0]',
776 m5 => 'Sorry, ich brauche eine Nachrichten Nummer',
777 m6 => 'Reply to: $_[0]',
778 m7 => 'Subject : $_[0]',
779 m8 => 'Nachricht eingeben, /EX zum absenden oder /ABORT zum abbrechen',
780 m9 => 'Neue Nachricht(en) fuer Dich',
781 m10 => 'Nachricht abgebrochen',
782 m11 => 'Nachricht Nr. $_[0] gesichert und weitergeleitet an $_[1]',
783 m12 => 'Nachricht Nr. $_[0] geloescht',
784 m13 => 'Nachricht Nr. $_[0] fehlt',
785 m14 => 'Nachricht Nr. $_[0] markiert als gesendet an $_[1]',
786 m15 => 'Nachricht Nr. $_[0] unmarkiert als gesendet an $_[1]',
787 m16 => 'Brauche eine Nachrichten Nummer',
788 m17 => 'Sorry, kann Nachricht nicht senden im $_[0] mode',
789 msg1 => 'Bulletin Nachrichten aufgeschoben',
790 msg2 => 'Private Nachrichten aufgeschoben',
791 msg3 => 'Msg $_[0]: $_[1] geaendert von $_[2] auf $_[3]',
792 msgu => 'Gebrauch: msg <cmd> <msgno> data...',
793 merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
794 moon => 'Standort dd/mm/yyyy Rise Set',
795 moon_with_azel => 'Standort dd/mm/yyyy Rise Set Azim Elev',
796 mond => 'Ueberwachung Disabled',
797 mone => 'Ueberwachung Enabled',
798 namee1 => 'Bitte Deinen Namen eingeben, set/name <dein name>',
799 namee2 => 'Kann User $_[0]nicht finden!',
800 name => 'Dein Name ist jetzt \"$_[0]\"',
801 nodea => '$_[0] gesetzt als AK1A style Node',
802 nodeac => '$_[0] erstellt als AK1A style Node',
803 nodeb => '$_[0] gesetzt als BBS',
804 nodebc => '$_[0] erstellt als BBS',
805 nodec => '$_[0] gesetzt als CLX style Node',
806 nodecc => '$_[0] erstellt als CLX style Node',
807 noder => '$_[0] gesetzt als AR-Cluster style Node',
808 noderc => '$_[0] erstellt als AR-Cluster style Node',
809 nodes => '$_[0] gesetzt als DXSpider style Node',
810 nodesc => '$_[0] erstellt als DXSpider style Node',
811 nodex => '$_[0] gesetzt als DXNET style Node',
812 nodexc => '$_[0] erstellt als DXNET style Node',
813 nodeu => '$_[0] zurueckgesetzt als ein User',
814 nodee1 => 'Du kannst dieses Kommando nicht waehrend Dein Ziel ($_[0]) online ist',
815 notdone => 'Nicht ausgefuehrt',
816 nothere => 'Sorry, aber $_[0] ist nicht hier im Moment, bitte spaeter nocheinmal Versuchen',
817 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
818 ok => 'Operation erfolgreich',
819 outconn => 'Outstanding connect to $_[0]',
820 page => 'Druecke Enter zum fortfahren, A zum abbrechen ($_[0] lines) >',
821 pagelth => 'Seitenlaenge ist nun $_[0]',
822 passerr => 'Gebrauch: SET/PASS <Passwort> <Rufzeichen>',
823 password => 'Passwort gesetzt oder geaendert fuer $_[0]',
824 passwordu => 'Passwort geloescht fuer $_[0]',
825 pingo => 'Ping Started to $_[0]',
826 pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs',
827 pinge1 => 'Cannot ping yourself!',
828 pingint => 'Ping interval on $_[0] set to $_[1] secs',
829 'pos' => 'Von Rufzeichen: $_[0] Lat: $_[1] Long: $_[2]',
830 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
831 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
832 priv => 'Priviligierten Level geaendert auf $_[0]',
833 prx => '$main::mycall >',
834 pw0 => 'Altes Passwort eingeben: ',
835 pw1 => 'Neues Passwort eingeben: ',
836 pw2 => 'Wiederhole neues Passwort: ',
837 pw3 => 'Passwort geaendert',
838 pw4 => 'Passwoerter differieren, Passwort NICHT geaendert',
839 qll => 'Bitte gib Deinen QRA Locator ein mit set/location oder set/qra',
840 qthe1 => 'Bitte gib Dein QTH ein mit set/qth <dein qth>',
841 qth => 'Dein QTH ist nun \"$_[0]\"',
842 qrae1 => 'Bitte gib Deinen QRA Locator ein mit set/qra <qra locator> (z.B. set/qra JO44RK)',
843 qrashe1 => 'Bitte einen QRA Locator eingeben, z.B. sh/qra JO02LQ oder sh/qra JO02LQ IO93NS',
844 qrae2 => 'Erkenne nicht \"$_[0]\" als ein QRA Locator (z.B. JO02LQ)',
845 qra => 'Dein QRA Locator ist nun \"$_[0]\"',
846 rcmdo => 'RCMD \"$_[0]\" gesendet an $_[1]',
847 read1 => 'Sorry, keine neuen Nachrichtenfuer Dich',
848 read2 => 'Msg $_[0] nicht gefunden',
849 read3 => 'Msg $_[0] nicht verfuegbar',
850 rec => '$_[0] records',
851 reg => '$_[0] registriert',
852 regc => '$_[0] erstellt und registriert',
853 reginac => 'Registrierung ist nicht aktiv (set/var \$main::reqreg = 1 to activate)',
854 regun => '$_[0] unregistriert',
855 route => '$_[0] auf $_[1] via $_[2]',
856 sat1 => 'Tracking Tabelle fuer $_[0] fuer den naechsten $_[1] Stunden alle $_[2] mins',
857 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
858 sat3 => 'Syntax: SH/SAT <name> [<hours> <interval>]',
859 sat4 => 'Satelliten verfuegbar:-',
860 satnf => 'Satellit $_[0] unbekannt',
862 sethop1 => 'Gebrauch: set/hops <Rufzeichen> ann|spots|wwv|wcy <Anzahl der Hops>',
863 sethop2 => '$_[0] hops gesetzt auf $_[1]$_[2] fuer $_[3]',
864 sethop3 => 'Keine hops gesetzt fuer $_[0]',
865 shutting => '$main::mycall shutting down...',
866 sloc => 'Cluster lat $_[0] long $_[1], Nicht vergessen die DXVars.pm zu aendern',
867 snode1 => 'Node Call Sort Version',
868 snode2 => '$_[0] $_[1] $_[2]',
869 snode3 => '$_[0] Unbekanntes Rufzeichen',
870 sqra => 'Cluster QRA Locator$_[0], Nicht vergessen die DXVars.pm zu aendern',
872 spf1 => 'spoof: erzeuge neuen User $_[0]',
873 stathf => 'HF DX Spot Stats, letzte 31 Tage',
874 stathft => 'HF DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]',
875 statvhf => 'VHF+ DX Spot Stats, letzte 31 Tage',
876 statvhft => 'VHF+ DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]',
877 statdx => 'Total DX Spots letzte 31 Tage',
878 sun => 'Location dd/mm/yyyy Rise Set',
879 sun_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
880 suser1 => 'Gebrauch: Rufzeichen user_field_name value',
881 suser2 => 'User $_[0] nicht gefunden',
882 suser3 => 'User Feld \'$_[0]\' war \'$_[1]\' nun gesetzt auf \'$_[2]\'',
883 suser4 => 'User Feld name \'$_[0]\' existiert nicht',
884 time1 => 'Lokala Zeit: $_[0] $_[1], UTC $_[2]',
885 time2 => '$_[0] Lokale (standard) Zeit: $_[1] ($_[2] Stunden)',
886 time3 => '$_[0] $_[1]',
887 talks => 'Talk flag gesetzt auf $_[0]',
888 talku => 'Talk flag zurueckgesetzt auf $_[0]',
889 talkend => 'Beendet Talk zu Dir',
890 talkinst => 'Talkmode, /EX zum beenden, /<cmd> um ein Kommando auszufuehren',
891 talknh => 'Sorry $_[0] ist im moment nicht online',
892 talkprompt => 'Talk ($_[0])>',
893 talkstart => 'Startet Talkmode zu Dir',
894 usernf => '*** User Satz fuer $_[0] nicht gefunden ***',
895 wwvs => 'WWV flag gesetzt auf $_[0]',
896 wwvu => 'WWV flag zurueckgesetzt auf $_[0]',
897 wxs => 'WX flag gesetzt auf $_[0]',
898 wxu => 'WX flag zurueckgesetzt auf $_[0]',
projects / spider.git / blob